My HP mini 210 will not boot up. The repair utility starts, but runs and runs with no results.

My HP mini 210-2080NR will not boot up.  The repair utility starts, but runs and runs with no results. Safe mode start up also fails. Tried BIOS diagnostics with f10, memory passed, but HD startd but did not finish.  Diagnostic log shows rusult 0303.  Any ideas would be helpful.  Thanks.

You can order HP recovery media here, or call HP on the phone to order 1-800-474-6836
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&lc=en&dlc=en#N76
If HP no longer has Recovery Media for your model, order them here
http://www.computersurgeons.com/Default.aspx

Similar Messages

  • Mac Mini i7 (Mavericks) will not boot from the external drive

    Mac Mini i7 (Mavericks) will not boot from the external drive with Disk Warroir 4.4. or Drive Genius or Lion.
    Not even from the external Firewire hard drive with Mavericks

    Does the external HD have a GUID partition table?
    Is the external drive formatted Mac OS X Extended (journaled)?
    Is this a 2011 or late 2012 Mac?
    How was Mavericks installed on the external drive?
    Who is the builder of the drive mechanism in the external drive?
    Who is the builder of the external enclosure?
    What type of interface does the external drive have USB2, USB3, Firewire 400, Firewire 800, thunderbolt?
    Is the external enclosure directly connected to the mini?
    Have youtried a different interface cable?

  • Help needed on startup. My computer will not boot from the CD drive!!!

    Problem with iMac G3 333, the Message on the screen states: "The System Software on the starup disk only functions on the media, not if copied to another drive." Like a fool, I copied the system folder from the original system software 9.2.2 on to the iMac. System disk which is not a complete system folder when used on the computer. I have searched the Internet, but can not find an answer. I have tried everything, holding down the C key, "Delete, Opition, Apple key, shift" holding the mouse down on startup, various combinations of other keys, etc. The CD starts to spin, but the computer switches to the hard drive and the message above returns. No matter what I try I still can't boot from the tray loading CD drive. Is there any Firmware code that I can use. I know how to access Firmware on the Imac and can boot the iMac using Firmware, but I don't know how to use Firmware to boot the CD drive which I need to do so I can reload the original software. CAN SOMEONE PLEASE HELP? Thanks, Jim

    Yes, I have tried both System Softwares a number of times. The C key will not boot up the CD drive and the harddrive always boots with the original message. I need to get the CD drive to boot so I can reloaded tge original software. Do you know anything about booting the CD drive using Firmware? Jim

  • My iMac will not boot into the Apple Hard Ware test. Why is this?

    I have a late 2012 27 inch iMac. It will not boot into the Apple Hard Ware test. I do have File Vault turned on. Will this stop it from booting in to the test?

    See Using Apple Hardware Test. For some Apple computers that shipped with OS X Lion, if Apple Hardware Test cannot be found on the hard drive, an Internet-based version starts up instead. An Internet-enabled connection via ethernet or Wi-Fi is required to use this feature. Some computers that shipped with Lion require a software update to use this feature. See Computers that can be upgraded to use OS X Internet Recovery for more information.
    Note: your machine cannot be running Mac OS X (10.6.7).
    27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2

  • My iMac will not boot past the logo and spinning gear

    My iMac will not boot past the logo and spinning gear (After a Rogue Amoeba update). I can't access the recovery disk I made on a flash drive. (Am I doing it correctly? - Hold down option while switching on? It just stays on the logo). What (if anything) can I do please?

    If you installed Lion onto your machine, it should have created a Recovery HD (hidden from view, but visible in Disk Utility with its Debug menu enabled, under Show all Partitions).
    That article states:
    Note: In order to create an external Lion Recovery using the Lion Recovery Assistant, the Mac must have an existing Recovery HD.
    Would I see the recovery menu (by holding down option on power up)
    Yes.
    if there was no recovery disc connected do you think?
    Shouldn't matter, since your int HD is always connected.

  • Have a MacBook Pro. the computer will not boot up, the screen has black and white stripes and multi color bands as well.

    Have a MacBookPro. The computer will not boot up. the screen has black and white bands with multi color bands as well.

    Yeah it's dead. Take it to an Apple Genius Bar and have it checked out. Then buy a new one.

  • Window will not boot on the usb cd rom what should be done

    window will not boot on the usb cd rom what should be done

    Do you have that problem when running in the Firefox SafeMode? <br />
    [http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this: <br />
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • Iphone 4 will not boot up, the apple logo does not go away

    The phone will not boot up, the apple logo stays on and does not finish booting.  All I did was delete an app, I went to reboot the phone becasue it was running slow and now it wont boot up at all.  I've tried the hard reset and nothing

    And then if that fails try this:
    What is DFU: Device Firmware Upgrade
    Step 1: Turn off your iPod touch / iPhone completely and connect to PC / mac
    Step 2: Hold down the Power button for 3 seconds
    Step 3: Without releasing the power button, also hold the Home button for 10 seconds
    Step 4: Without releasing the home button, release the power button and keep holding the Home button  for 20 seconds.
    Itunes will identify that you are in DFU mode.

  • My early Intel iMac running Snow Leopard will not boot past the apple logo. I have tried holding the c key and inserting the install disk, but nothing. What do I try next?

    My early Intel iMac running Snow Leopard will not boot past the apple logo. I have tried holding the c key and inserting the install disk, but nothing. What do I try next?

    I have tried resetting PRAM and all other items listed in the Apple support site. This happened after an update to iTunes was added. Also this is happening to other people. Please help.

  • Hey, for some reason i turned on my macbook pro 2012 and it says i have no internet access. I then found out that it also says that my self assigned ip address will not connect to the internet. How is this and how can i fix it?

    hey, for some reason i turned on my macbook pro 2012 and it says i have no internet access. I then found out that it also says that my self assigned ip address will not connect to the internet. How is this and how can i fix it?

    Reset your modem.

  • My images will not show in the Finder Pictures folders, but just display as jpeg thumbnails.  I have to open each one to see what photo it is.  This has just recently started to happen.

    My images will not show in the Finder Pictures folders, but just display as jpeg thumbnails.  I have to open each one to see what photo it is.  This has just recently started to happen.

    I made sure the 'Show Icon Preview' box was checked.  This is about all I can do, really, Frank, as i don't know enough about the workings of these machines to start fiddling about.
    Strangely the images show as previews in some folders, yet not in others, even though they come from the same sources (my camera and my phone).

  • I successfully downloaded Lightroom CC. everything looks good, but it will not open. The circle spins about 2 times and then it just stops and I get nothing. I uninstalled and restarted my computer. I downloaded again. Same problem

    I successfully downloaded Lightroom CC. everything looks good, but it will not open. The circle spins about 2 times and then it just stops and I get nothing. I uninstalled and restarted my computer. I downloaded again. Same problem

    Have you tried logging out of your CC desktop app, then logging back in again? Quit/Restart won't work, but logging out and back in should. See here: https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  • An App is corrupt on my iPhone.  It will not delete in the usual way (jiggle then X) and it prevents the sync from completing - how can I force its removal?

    An App is corrupt on my iPhone.  It will not delete in the usual way (jiggle then X) and it prevents the sync from completing - how can I force its removal?

    Hi, Anyone who has this problem:  This is now resolved on my phone simply by the prudent timing of the phone software update to 7.1.  This update cleared the corrupt map and loaded the original - all my cares went away !!  It looks like a Restore would probably work as well, on this basis.

  • My mini iPad will not connect to the internet. Getting a message that it cannot connect to the server.  What is this and how do I fix it?

    My mini iPad suddenly will not connect to the internet or retrieve my email.  I'm getting an error message that says "cannot connect to the server".  How do I fix this?

    Nevermind.  I found the answer from someone else's question.  Thank you.

  • B/W G3 will not boot past the startup screen

    It boots all the way through to the last step - "Login Window Startup". It will not boot in Safe Mode, PRAM reset, etc. No Joy. It has sat and spun the colored wheel of death for hours.
    Any suggestions?

    Boot from the Install CD by holding down the C key at startup. Do not install or even choose a language. Choose Disk Utility from the Installer Menu. Select your Hard drive and click "Repair". If anything is fixed, rerun again until it has no errors. Then run "Repair Permissions" once. Its many messages can generally be ignored.
    If it will not chime a second or third or fourth time in response to the
    Command Option p r
    keys held down at startup, anecdote says that the PRAM battery is likely to be dead.

Maybe you are looking for

  • Changing size and resolution with pl/sql

    Hello, does someone know if it is possible to change the resoultion and size of an uploaded image with pl/sql? we want to upload an image over a webform and want to save it in the database, but before saving it, we want to change the resolution to 72

  • What folder Do I install my instrument plugins into in order for Logic to See Them?

    I recently bought Ivory Grand II and I installed it on my Mac, The program shows up perfectly in Garageband but not in Logic Pro X. Do I need to install plug-ins in a specific Folder because I dnt understand why its not showing up.

  • Which airport card can I put in an MDD?

    G4 1.25 MDD, that is......And...where is a good place to get one? thanks

  • Scripting and metadata field question

    I'm trying to set up a subscription response, that is triggered on a check box which adds all of a FCP project's element's Master Assests to it's member productions. I.E. FCP project "A" which contains elements 1,2&3 and resides in Production "Z", wi

  • OSS Note of Older Version ?

    Dear All, Can we download a OSS note which is of older version than the latest version. i.e. if the latest version is 17 and I want to have the same OSS note of version 5 then can i download the same from SNOTE Transaction ? Regards, Deepu.k