My hp notebook 2000 wont startup

when i try to start my hp notebook 2000 it goes to automatic repair and cannot complete that and says errorr. I have windows 7 operation system on a flash drive and I need to know how i could re install windows on the computer. The screen is cracked and I do not know how to connect it to my monitor being able too would greatly help me to fix the computer.

Hi Sk8forlife,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP 2000 Notebook and needing to connect a monitor. Here is a link to connecting a monitor.
You should be able to restore the Windows 7 using system restore.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

Cant locate my hard drive...wont startup

hello
Ive been reading through problems where machines wont startup...only the flashing icons and clicking...still I cant find a solution...is my machine finally failing
Ive tried inserting the installation disk and reinstalling it but the destination window is empty [i dont see my disk]...please help with a fix...
Message was edited by: marAz14

marAz14 wrote:
Ive been reading through problems where machines wont startup...only the flashing icons and clicking...still I cant find a solution...is my machine finally failing ?
A flashing disk icon means the bootloader that starts up your Mac can't find a suitable startup disk. Something happened to the internal HDD to cause this, the damage may be repairable or not.
Ive tried inserting the installation disk and reinstalling it but the destination window is empty [i dont see my disk]...please help with a fix...
It can't see the disk for the same reason that the bootloader couldn't. Let's try to see if it is fixable before reinstalling everything and losing all your settings. Since you already are able to start up from the Install CD/DVD, go to the Utilities menu and select *Disk Utility*. There, check and see if the HDD device appears on the left column. Under and indented you should see the volume by name.
If the device does not appear, then it is really hosed and you will need a new one.
If it appears, with or without the volume, it means it is damaged but may be repairable. Click on the device and do a *Repair Disk*. If it says there are errors, repeat *Repair Disk* until it comes out clean with no more errors. After that, reboot and see if the Mac will start up correctly. When it does, run Disk Utility again (it is found inside the startup volume's Utilities folder) and do a *Repair Disk Permissions*. If all is well, you'll be a happy camper and your Mac will live to see another day.
If you can't get the *Repair Disk* procedure to come out without errors, it means that the damage is more severe and Disk Utility can't repair it. You can either get heavier duty tools, like TechTool Pro or Disk Warrior, or you can choose to format the HDD and reinstall afresh. Note that you will lose everything. If you decide to format and the formatting has errors, it also means the drive is permanently damaged and will need to be replaced.
Let us know how it turned out and welcome to Apple Discussions.

KeyBoard Problem HP Notebook 2000 PC

Im not quite sure where to put this but hopefully someone can help. Last night I was on my Hp notebook 2000 laptop pc and it was working perfectly fine but today I hadent gone on it all day and wanted to go on it. So everything loads up correctly and than i type in my password and go onto Youtube. So im watching a video and notice the volume is at 0 so i press the key to up it. I didmt notice anything till the video stopped playing. I was on Airplane mode for some reason. So i try to un press it and then up the volume same thing. So I thought maybe something glitched and i should shut off my laptop and try again. Everythibg loads up fine but i get to the password and i press the letter "T" I get see 5 black dots instead of 1. I try to back space it just adds another dot. So I use the on screen keyboard and use it to log in. I click on my browser Firefox I go to type in a letter I get basically a jumble of letters and this is happening to all of them. I try to backspace it gives me "/". So im confused as what to do to fix it. I didnt mess with it or damage it, it was working fine yesterday. Can someone please help me and try to give me details of this problem and how to fix it.

According to the message you have recently posted I would like to confirm that this is a hardware issue and I strongly recommend you to immediately Contact HP Technical Support over the Phone for further assistance without any delay to get your Notebook diagnosed and serviced by an authorized HP Certified Engineer
You can also Check your warranty Here to verify the warranty status
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

Forgotten password to log in my hp notebook 2000

does anyone know how to get into safe mode on my hp notebook 2000 It will not let me long in with my password it says incorrect password plus the e mail address it shows upon start up in incorrect

Hi jcagle,
You can go into safe mode by going to the shutdown option >> by pressing the shift key and clicking the restart option >> wait for it to load >> troubleshoot >> advanced option >> start up setting >> click restart >> click option no. 4 to boot into safe mode.

HP Notebook 2000 cooling fan issue

Hey, everyone. I've had my HP Notebook 2000 for a few years and I've discovered my first major issue just a few days ago when the cooling fan stopped working. I don't really mind it too much because I have a USB-powered cooling fan that my laptop rests on, and it does a pretty good job. My entire laptop remains at about the same average tempurature.
The biggest issue I'm having is every few hours, the laptop will automatically shut off because of it.
As well, when I boot it up (turn it on), it gives me a reminder that the cooling fan isn't working and I will have to press "enter" or the laptop shuts off in 15 seconds.
How can I make it so the laptop ignores the broken cooling fan? I don't want to spend the money to repair it because I can rely on the USB-powered cooling device.
Thank you!
~Mark
This question was solved.
View Solution.

No you can't. Reason it probably shuts down is because cpu temps peak over safety threshhold at times thus it shuts down to prevent damage.
Cooling systems on hp's are not the best when working so thermal stress on cpu,gpu & mainboard will be bad & failure failure will occur quite quickly.
Fan assembly is very cheap & can be done DIY if you have some skill in dismantling these sort of things & following hp service manual & other online guides.
I expect a new fan & new thermal paste & shimming along with cleaning would do wonders for running temps & long term health of the notebook.
Like my post? Click Kudos (thumb+) to show appreciation.

HP notebook 2000-2d05EM

Hello i have windows 8.1 Hp notebook 2000-2d05EM and i cant find right Amd driver for my pc.I have amd radeon hd 7400m series.Any suggestions?Links for drivers?

Hi @Mraka ,
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp you are looking for drivers for your notebook. Here is a link to the supported drivers for your notebook.
HP 2000-2d05EM Notebook PC Drivers
Have you ran the HP Support Assistant to look for HP updates and help resolve issues?
Here is a a link to Downloading or Updating Software and Drivers for HP Computers for your perusal.
If you are still having a difficulty, I suggest contacting HP support.
Please call our technical support at 800-474-6836. If you live outside of the US/Canada Region, please click the link below to get the support number for your region. Phone Assist Worldwide
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Disk Utility wont startup

I'm trying to start Disk Utility (under mac os 10.4.8, intel) but it wont startup. It bounces one time in the dock and then dissapers.
I tried a copy of an other computer, but the same problem. I Repaired Permissions in the terminal. I've reset my P ram.
This didn't work at all. Anyone an idea?

Wow, that's not good.
The first four bytes of a "Universal" Mach-O loadable object and/or executable should be (in hexadecimal representation, which is what the "0x" prefix signifies):
<pre>0xCAFEBABE</pre>
but instead, it's saying that the first four bytes are:
<pre>0xCC8B45D0</pre>
In other words, the internal data of the file has been altered or is otherwise incorrect so that it's unusable.
Before doing anything else, I would, if you haven't already done so, startup from your Install DVD/CD and use Disk Utility to make sure your disk directory checks out okay. Use the Verify/Repair Disk buttons to do this. How to repair this problem short of an Archive and Install is a bit tricky.
What exactly did you try copying from another Mac? That could work, but you need to make sure that you only copy it from a Mac of the same architecture: Intel-Mac to an Intel-Mac and PowerPC to a PowerPC Mac. Note that the Disk Utility application itself is most likely fine, there's no need to copy that. What you want to copy is the /System/Library/PrivateFrameworks/DiskImages.framework/. Copy that "DiskImages.framework" folder from another Intel-based Mac and put it into the /System/Library/PrivateFrameworks/ folder on your (damaged) Mac. Replace the existing copy. (You'll need to click the "Authenticate" button to enter your password in order to accomplish this). Then try launching Disk Utility to see if it will launch successfully.
Hope this helps....
Dual 2.7GHz PowerPC G5 w/ 2.5 GB RAM; 17" MacBook Pro w/ 2 GB RAM - Mac OS X (10.4.8)

Http service in the win nt services wont startup

http service in the win nt services wont startup either manually or automatic
please help.

My suggestion is to navigate to the Apache home and startup Apache manually. The console window will let you know if there is something wrong with the configuration files.
Frank

My macbook wont startup

my macbook wont startup, i have tried using the PRAM reset and I hear the second start up chime and then it says start up disk is full and the screen stays blue. What can I do?

Prior to this, were you getting messages indicating that your start up disk was "almost" full... suggesting you you clear up some space? Was your machine running very slow or possibly frequently crashing?

Notebook laptop wont do anything

My lil HP notebook laptop wont turn on at all even trying the tips I'v read and everything.. recently the BIO screen came on and I accidently shut the screen and after that Nothing!! I tried everything that I read. I tried taking the batt out holding the on button on for 30 secs with the ac adaptor plugged in.. Noda, I even tried doing what I seen on youtube about holding certain buttons down at the same time too reset it Noda ,What can this be.. Thanks

i have a similar problem
My Pavillion dv7-7199us labtop not powering up.
- First, few weeks ago, it didn't power up untill i remove the battery and connect AC charger only and after i shutdown the charging led stays on (white)
- After that it didn't power on with AC charger. I did the hard reset and it worked.
- Now, it doesn't power up at all.
i tried to use battery only, AC charger only, Both of them, and tried the hard reset. all failed.
when i connect the AC charger, the charging led turns on (white) .
the battery test button (lights below the battery) says the battery is near full charged.
when i press the power button, no lights, no sound and no response at all.

Laptop wont startup when I turn it on..white screen comes up but wheel just keeps turning

Hi my laptop wont startup after I turn it on..The white screen with the apple comes up and the wagon wheel just keeps on turning.

What cat flavor does your Mac have? Lion? Mountain Lion? Older cats?

G5 Wont Startup

Hey Guys!
So I have a G5 tower that wont startup. Heres whats going on:
-When I try to start it up normally it gets to the spinning grey wheel then turns off.
-Resetting the PRAM does nothing. I might need a new PRAM battery but I'm not sure if that explains the symptoms. I ordered a new one though, should be here soon.
-When I try to boot off a Tech Tool Pro DVD I get a kernel panic screen, that says You need to restart your computer. Hold down the Power button blah blah blah... The text on the screen ends with BSD process name corresponding to current thread:kernel_task
-Tried to boot off the Tech Tool DVD with the HD unplugged, same error.
-When I try to start up in safe mode it stays on the spinning grey wheel for a couple of minutes, then turns off.
-In single user mode ran fsck -y and it returns:
disk0s3: I/O error.
Invalid node structure
(4,275)
**Volume check failed
/dev/rdisk0s3 (hfs) EXITED WITH SIGNAL 8
and then says
'PowerManagement emergency overtemp signal. Going to sleep!'
Over and over.
-I reset the nvram in open firmware earlier, which did nothing, but now when I try to start up in open firmware the screen just stays black and nothing happens.
-Earlier, booting in verbose mode would return some errors, then shut down immediately, but now its just goes to a black screen as well.
-Resetting the PMU didn't do anything.
-Switched the RAM around, so I'm pretty sure its not a problem with the RAM, or the RAM slots.
Any ideas on what's going on or what I should do next? Or should I just wait for the new PRAM battery? Thanks for helping!

Any areas I should concentrate on?
CPU heatsinks, Video card, RAM, Fans, Power supply.
about a foot away from my 10' sub. Could that have caused the damage?
I wouldn't think so, at least yet.
So how would I go about fixing the HD? TDM maybe?
Yes, but I think we have to take care of the heat issue first.

My MacBook Air wont startup after login

my MacBook Air wont startup after login???

Try to boot your computer in Safe Mode: restart and hold the shift key down.
This can take some time, so be patient.
Explanation here: http://support.apple.com/kb/ht1564
If thyis leads to the computer booting, you can restart without holding the shift key down.

Lightroom CC wont startup after installation on mac

lightroom CC wont startup after installation on both my mac's, it only hows a splash screen at startup.
I have tried to restart the computer
Anybody know what to do ?

I'm having the same issue and the log out and back in trick is not working for me.
I've just installed and when I try and launch the application, i see the splash screen for a split second and then the application crashes.
It is happening on both of my Retina MacBook Pros.
One is: Late 2013 Retina 15" MBP - 2.6 i7 - 16GB RAM - 1TB SSD - NVIDIA GeForce GT 750M 2GB
The other is Early 2013 Retina 15" MBP - 2.7 i7 - 16GB RAM - 256 SSD - NVIDIA GeForce GT 650M 1GB
Same behavior on both.
I've uninstalled and reinstalled. I've trashed pref files. Not sure what else to do.

Accidentally deleted startupitems from library/startupitems on macbook now the computer wont startup and i get the grey startup loading screen with the apple symbol and a loading bar but wont load then turns off.

hi, please help.
Accidentally deleted startupitems from library/startupitems on macbook now the computer wont startup and i get the grey startup loading screen with the apple symbol and a loading bar but wont load then turns off.
i saved these files to a folder on the destop and then turned the computer off. oops!!! now computer wont start up
How do i put the startupitems back to this folder or beter yet get into the computer to fix this.
Please please help!!!

Reinstall OS X, either from disc or a recovery partition. You don't mention which version of OS X you're running so I don't know which it will be.

My hp notebook 2000 wont startup

Similar Messages

Maybe you are looking for