My HP Office Jet 6700 Premium has suddenly stopped printing from my iPad

I have a new HP Office Jet 6700 Premium
It had been working just fine, wireless printing from my iPad.
iPad shows a window that recognizes the printer, but it does not print.
There is no error message.
This question was solved.
View Solution.

The steps below typically resolve the issue you’re experiencing:
1. Power off the printer.
2. Completely power off the iOS devices (hold the Sleep and Home buttons simultaneously until a message appears asking you to "Slide to power off". Slide across that bar, and it should completely power off).
3. Power the printer back on.
4. Power the iOS devices back on.
5. Try to print again.
Those steps usually resolve the issue. If they do not, try this additional steps:
6. Power cycle your router (usually done by unplugging the router’s power cord, waiting 20 seconds, and plugging it back in).
7. Make sure that the iOS devices and the printer are all connected to the same network, then try to print.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Similar Messages

Wireless is not working on my new HP office jet 6700 premium

Gents,
i have a new HP office jet 6700 premium all in one printer and i coneccted to the network via wireless and its works only for 2 minutes and after that its not working via wireless unless i disconnected and reconected again please advice.
FYI it is working very good by USB, and im using Mac OS X 10.9.3 version
Regards,

Hi Kattoa,
Welcome to the HP forums!
I'm sorry to hear your Officejet 6700 doesn't seem to be holding it's wireless connection but I'd be happy to help determine what the problem could be
I think it would be best if you followed this Printer Does Not Maintain Wireless Connection document as it should be able to help determine why the printer has to be reconnected so frequently.
Let me know how that goes for you!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Dissatisfied with HP Office jet 6700 Premium Printer

I've had a HP Office Jet 6700 Premium Printer for 18 months and have encountered a failed printer head issue which essentially requires full replacement of the printer. I've seen many other similar reports by others which clearly indicates this printer has a serious problem with the printer heads. I'm getting ready to replace this printer, which is just 6 months out of warranty, and will seek another vendor to provide printing equipment. Very disappointed in HP's printer product and will gladly provide input to help others avoid running into this problem.

Please read this post then provide some details. What operating system? What are the error messages on the printer or computer screen?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Droid Ultra has suddenly stopped charging from the wall plug-in

My Droid Ultra has suddenly stopped charging from the wall plug-in. I've tried every charger in the house. I've tried to plug it into a wall charger at work in case there may be an issue with my outlets at home, but it won't charge from a wall plug-in from any location. However it will chage if I plug it into the computer or my portable battery charger. Any ideas why it won't charge from a wall plug-in and how I may fix it?

Let's get your phone charged, chaseperil! You stated that you have tried every charger in your home. Have you tried the whole charger or just the cable? We want to make it is not the plug part of the charger. Are you using the charger that came in the box?
RobinD_VZW
Follow us on twitter @VZWSupport

My iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, although it will print if connected via USB. Meanwhile, my MacBook (OS 10.5.8) prints still prints wirelessly. Please help.

May iMac (OS 10.7.4) has suddenly stopped printing to my Epson CX4800 printer through Airport Extreme, though my MacBook (OS 10.5.8) continues to function just fine). The iMac will print if it is connected to the printer directly via USB. The iMac continues to connect to the Internet wirelessly. I've tried resetting the printer and ensuring the driver is up to date, but no joy.
Any suggestions?

EPSON Stylus CX4800 All-in-One Printer
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=58606&prodoid=56291 067&infoType=Downloads&platform=Macintosh

My iPad has suddenly stopped printing to my hp AirPrint printer although it says that it has contacted the printer. My iPhone still prints o.k.

My iPad has suddenly stopped printing to my hp AirPrint printer. It was working fine but now although it says it has contacted .the printer etc. nothing prints. My iPhone still prints o.k. So don't think it is the printer or router

Try rebooting your iPad by pressing and holding the Home and Sleep buttons at the same time until the Apple symbol appears (Ignore the power off slider).

My HP printer has stopped printing from my IPad.

I have an HP photosmart c310. I sometimes get a message that the IPad has connected to the printer but nothing prints. Other times O get no message at all. I haven't made any changes to my network or settings and I can print from other devices.
Any ideas as to what i can do to rectify this problem?

Hi slfiedler, welcome to the Hp forums
This is the main supoprt page of your printer CLICK HERE here you can find useful how to's and even troubleshoothing steps for almost any issue with your printer.
Let's do this;
Set an static Ip address for the printer
Read this article; Click here;
In step 6 it will explain the how to, in the same page you can assign and static DNS server I will recomend using google public DNS servers Which are 8.8.8.8 and alternative or secondary 8.8.4.4
Let me if after doing this you still facing this issue I wil do my best to help you.
Hope this is of help:
RobertoR
Remember==▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

HP laser printer b/w suddenly stopped printing from photoshop

I have a mac 10.6.8, and an HP 1102w, which I got specifically because the ink contains iron oxide which I can fire onto my ceramic sculptures. It has been working fine printing from photshop CS5 for several months. Today I tried to print and got a page of very fine vertical lines down most of the page and various horizontal marks at the top of the page. The same file prints ok on my Canon printer, and files from Preview print fine on the HP. I changed the cartridge, which was getting low, but that didn't help. I closed all the apps and turned off the computer, also unplugged and replugged in the printer. It only doesn't print from photoshop. Please help!

Thank you Michael, but I don't know how to delete the printer driver. Can you walk me through it?

HP Office jet 6700 Premium e-All-in- one. Not printing from Mac Pro

Moved to the Mac printing forum for better coverage.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

What router? Have you restarted the router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Office Jet 6700 Premium All In One

Printer works but copy function does not. When copy is selected, it reads "starting to copy" but never does anything. Have to turn off machine to get it to cancel "starting to copy".

Hello amw1945! Welcome to the forums!
I saw your post about how you cannot make a copy. I would suggest checking for a firmware update and completely power resetting the printer with leaving it unplugged for at least 60 seconds. Ensure the printer is plugged in directly to a wall outlet. Avoid power bars and surge protectors to test the copies.
Getting the Latest Firmware and Product Updates
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Web Services could not be Enabled (Office Jet 6700 Premium)

Hi,
     I've successfully connected my printer the internet via wireless connection. I can print from any computer over wifi. However, I cannot enable web services.
    I have tried every troubleshooting method available under the sun.
     Eg) Manually setting IP Addres and DNS, Restarting, Resetting to Default, Rebooting Router, updating router etc.
    All methods I have tried are also here (http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/ePrint-Apps-Connecti...
I have read every forum relating to this issue and everyone seems to have had their issue resolved through all one or more of the methods I have already used. I am quite disappointed with having to spend so long getting my product to do what it is meant to do straight out of the box.
Any further guidance would be kindly appreciated,
            Kind Regards

Hi there, your frustration is understandable. It sounds like you have exhausted all the troubleshooting steps but if you haven't already, try using the manual DNS values in the image below in the printers embedded web server (EWS) settings. If you've already done this and your printer is only new let me know what country you are in and I'll provide you with a direct number for HP phone support as you may be entitled to a replacement.
Best.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Office Jet 6700 Premium only prints the same crossword over and over

My wife likes to do the daily crossword. However now it only prints the same one repeatedly. How do I get the EPrint to roll over to the next day? I have tried cancelling and resetting the app to no avail. Any help is deeply appreciated. I even tried the HP paid service. They were no help.

Hi,
It's very easy to add but a bit hard to remove. Please use the following instructions:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/Re-How-to-add-or-rem...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Office Jet 8600 Premium unable to set printer as default. Error 0x00000709

Have NEVER been Able to make my new OJ 8600 Premium the default printer--Win7x64 Ultimate, McAfee, MSOffice All Updated. This is less than 30 days old!!!!
Installs and seems to be fully functional, Prints a Test Page, & Scans using YOUR software, BUT:
Will Not Scan Normally from Acrobat as it will not recognize (still has my HP 6500 listed which is UNINSTALLED & Registry cleaned ) Can scan using Custom Settings (WT*?!!)
Outlook & Excel "sees" the printer BUT will NOT print Fails to connect.
Checked & cleaned registry of OLD printer info then rebooted as indicated in some of the forums. STILL 0x00000709
Took offline and tried a direct connect using the USB port. Rebooted all and still 0x00000709
I thought initially it was just me. BUT, this is ALL OVER THE INTERNET, and NOT just on the 8600.
I am about to put the 8600 back in the box WITHOUT the packing and SEND it BACK. OVER 20 years with HP, BUT I have HAD IT!

Hey MHz67,
This error is coming from the Windows OS itself and is most likely coming from an issue with your Print Spooler service. I would advise trying to run the Microsoft Fixit tool for automatically detecting and fixing printing problems.
http://support.microsoft.com/mats/printing_problems/
Once this has run are you able to get the printer to be set as default and function?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

HP Office jet 6700 ,trying to print and it will say Printer Ready, Empty Print File !

I have a HP Office Jet 6700. I'm trying to print a document , it will say prining Untitled . The printer queue will open up and say printer is ready, empty print file,Idle.
It automatically goes into paused printer. When I try to click on the document itself in the print queue and resume print it gives the same message again.
The Power on the actual printer is flashing slowly as well.
I hae restarted my computer and shut down the printer completey multiple times and it still has not worked. I just printed something on this last night so I'm not sure what the probelm is.
This question was solved.
View Solution.

Hello there! Welcome to the forums @Chinadoll702
I read your post about the printing issues you've been experiencing on your Mac running 10.6 and your Officejet 6700. I have a few ideas in mind to get started and let me know the results and we will take it from there.
Update the Firmware on the printer: Getting the Latest Firmware and Product Updates
Power reset the printer and make sure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Make a few copies afterwards and tell me if the copies pause, cancel, do not work, etc.
Try printing from Text Edit on your Mac as well, and get back to me with the results.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HT3669 Can't scan from my HP Office Jet 6700 (Fax) to my MacBook Pro

Hi there, I can't scan from my HP Office Jet 6700 (Fax) to my MacBook Pro. I've tried all of the tips I've found online but when I try to 'Enable Scan to Computer' it says that there is a communication error. Anyone got any tips for me?

Hi,
Both printer and computer seem to be on same network.
Please download and run the following utility to troubleshoot on the issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&jumpid=reg_r1002_usen_c-0...
Also download and install the firmware update from the link below.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-89897-4&cc=us&dlc=en&lc=en&...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

My HP Office Jet 6700 Premium has suddenly stopped printing from my iPad

Similar Messages

Maybe you are looking for