My HP Officejet 4315 All-in-One does not print

My HP Officejet 4315 All-In-One printer does not print althoug it is connected to my laptop and working properly
The dial shows the word FAX instead of PRINT.  How can I remove the word FAX? because I think this is the prolem
Any one with info pls email me at:[edited email by moderator]  Thanks,  pedrodomenech

Hello  @pedrodomenech , and welcome to the HP Forums, I hope you enjoy your experience!
I can see you're running into fax/print issues.
I would love to help with that, but I need a little information to try and help you first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find.  Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

  • Installed HP Officejet 4100 All-in-one does not appear in Control Panel printer selection window.

    My HP Officejet 4100 Series 'All-in One' DOES NOT APPEAR in the Control Panel window even after several re-installs. The diagnostics indicate that the 4100 is not connected and dos NOT point to any path for a solution.
    Attempts to download a current Driver, ( or re-load the 4100 "software" ), WILL NOT work because the 'help' page states the driver already comes with the 4100 software and therefore does not provide for any download update, (driver or software) for the 4100 printer.
    I have reinstalled from the original Disk for the 4100 and also attemped install with Windows Update requested driver. Nothing works.

    Hi there @Past77 
    Welcome to the forums
    I read your message about your Officejet 4100 not showing that it's connected, and that you have attempted to run the Windows Update to see if that would help get the printer working again. You are correct that this model does not have a downloadable driver for Windows Vista, so your best bet would be to try running the Print and Scan Doctor tool, to see if it can kick the printer into gear and have it functioning again.
    If the tool does not work, I would then recommend looking in to a printer upgrade. Consider giving us a call to see what your options are with HP.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Best wishes to you,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP5640 All-in-one does not print photos from Windows Live Photo Gallery

    Setup printer using mobile device  Installed print driver using provided CD. Updated driver software. Printer is networked by wireless to computer & smartphone.Was able to print photo from smartphone, was able to print Word document from computer. Was unable to print photo from computer using Windows Live Photo Gallery. Used the HP troubleshooter, following all possible solutions to no avail. Selected the option of HP Photo Paper but it defaulted to the 8x11 paper tray. Can someone please help? Thank you!

    Hey , Welcome to the HP Support Forums!
    I understand that you're experiencing issues when printing from Windows Live Photo Gallery on your Windows 8 computer to your HP ENVY 5640 e-All-in-One Printer, as your prints continue to default to the letter size Paper Tray. I would like to assist you today with resolving this printing issue. Can I please have you follow the steps below to properly configure your print settings under the Print dialogue window in Windows Live Photo Gallery.  1. Load your Photo Paper in the Photo Tray on your printer  2. Open an image you would like to print under Windows Live Photo Gallery 3. Click on File and select Print   4. Under the Print dialogue window please ensure that your printer, Paper Size, Quality, and Paper Type are all set properly for your specific print job    5. Next, click on the Options button on the bottom right hand corner. Under the Print Settings dialogue box click Printer Properties.    6. Next, change the Paper Source to Photo Tray. If it currently is set to 'Main Tray' please click the Main Tray option and it will drop down to allow you to select Photo Tray. Click OK once the Tray change has been made.    NOTE: If the Paper Size shows an exclamation mark, it means that your Photo Tray does not support the Paper Size selected. Click the dropdown next to Paper Size and choose a size that does not show an exclamation mark.     7. Under the main Print dialogue window click Print on the bottom right   Your document should print as per normal now from the proper Paper Tray.   Please let me know if the steps provided resolve your Paper Tray photo printing issue. I look forward to hearing from you. Good luck!

  • How do I get photoshop cs10 on a windows 7 laptop after a wizard doctor download the officejet 7610 all-in-one is not printing showing i need to load paper but i've done as the person in the video is showing but it's stll not resolving?

    HOW AFTER A DOWNLOAD OF A WIZARD DOCTOR FOR THE OFFICEJET 2710 TO RESOLVE NO PRINTING OR SCANNING AND FOLLOWING THE INSTRUCTIONS ON THE LED DEMO TO LOAD THE PAPER WHAT CAN i DO?

    Dennis,
    what has that go to do with Photoshop? If you can't print on an HP 7610 no matter what you may need to print it is a legitimate question. Yes?  I guess you've nothing to offer in terms of a printing solution.
    No caps as far as I can see from the full threads.   So no shouting. Each time I asked the question the reply from the monitor was that I didn't put it in the form of a question.  Assuming that the monitor was saying re-word it and send it again. So I did.  Not realizing that each time it was a different post.
    Mark

  • Photosmart 2575 all-in-one,does not print, the paper rolls too far, jam message

    When I try to print or copy, the printer takes a sheet but it doesn't stop where it normally stops to start printing. After that nothing happens, only got a jam message

    Hello Mr. Wilks,
    I am sorry to read about the issue you are having with your new Photosmart 6520 not picking up 4x6 paper. I understand you have cleaned the rollers and that did not resolve the problem. I have researched this and have found a couple of documents that I recommend you look at to ensure all of the print settings are correct when printing on a 4x6 or any other size you wish to print on.
    I am unsure if you have a Windows or a Mac computer, therefore I will post 2 different links for you to look at depending on which operating system you have.
    Here is the document for troubleshooting on Windows: Printing Photos Saved on Your Windows Computer
    Here is the document for troubleshooting on a Mac: Print Photos Saved on Your Computer (Mac)
    I really hope this helps you, feel free to respond if there is anything else I can help with!
    Regards,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Officejet 4315 All-in-One

    I have an HP Officejet 4315 All-in-One that I bought several computers ago.  I now have 2 computes that have Windows 8.1 on them, and the installation disc is for Windows 2000 and Windows XP.  The installation disc says that my system doesn't have what it takes to load this printer, and I can't seem to find a driver that will work.  I have run the HP software that checks your printer, and it prints and scans on the test run.  It will scan off my computer and allow me to save to my computer.  It will not print what I personally scan.  It makes copies independent of the computer. 
    I think I need a driver.  I don't understand why it prints on the test run by HP, but won't do it off my information on my computer.  Any ideas? 
    It is out of warranty and basically there isn't anything wrong with it except it doesn't go with Windows 8.1.

    Hi @dgclmn51 
    Although there is no full feature software and driver for the officejet 4315, you can still use the printer with the computer.
    Please use the following document to learn more; Install a Windows 8 Driver with Windows Update.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Cleaning print head HP Officejet 4315 All-in-One Printer support

    Hi,
    I'm having a problem with my 
    HP Officejet 4315 All-in-One Printer.
    I'm using Windows 8 and have topped up the ink levels. The printer is printing with white lines which I understand indicates that the print heads need cleaning.
    All the advice I can find online says that to run a print head clean from your computer you need to go the printer in control panel > select printer properties > then click on the 'maintenance' tab.
    Using Windows 8 it appears there is no "maintenance" tab and I cant find any option to clean print heads elsewhere on the properties tab!
    Not sure where to go from here?
    Many thanks for your help in advance.

    That is the only way you can clean the ink cartridges. I would recommend contacting HP technical support for further assistance. Click here to find out: HP Worldwide Contact.
    Good luck.
    I worked on behalf of HP.

  • My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.

    My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.  This is especially disconcerting at Christmas time when you're trying to get Christmas letters in the mail!  Any help?

    The cyan portion of the printhead may be clogged.  I would suggest running the diagnostics shown here.  If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • My HP LaserJet 3055 All In One does not scan using Windows 7 - 64bit.

    My HP LaserJet 3055 All In One does not scan using Windows 7 - 64bit. I can copy and print only. Thanks.
    This question was solved.
    View Solution.

    Hi,
    Is the printer connected to your PC by USB or network?
    By using USB connection, you may scan using the Windows Fax and Scan software integrated into your OS.
    Scanning through a network connection unfortunately supported on Windows7 32 bit only, as you  may find listed within the About network scanning section below:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02539136#A2
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Hp officejet pro 8100 and it does not print bar codes from UPS or USPS

    have an hp officejet pro 8100 and it does not print bar codes from UPS or USPS.  Can you please please help? i have used my ipad, by HP G62-355DX Notebook and neither will give me printed bar codes.  The balance of the mailing label do print, just not the bar code.  It may be my imagination, by I believe it used to print thebar codes.

    Hi,
    Try adding an alternate driver and try to print.
    To use an alternate print driver for HP printers in Windows 7:
    1. Click on the Start menu.
    2. Click on Devices and Printers.
    3. Click Add a Printer
    4. Add a local Printer
    5. Select Create a New Port
    6. Select Standard TCP\IP port
    7. Enter Printer IP address (Printer IP address can be found by printing network config page from printer
    8. Under Manufacturer select HP and under printer select HP Officejet 8000 pirinter or Officejet 7410
    9. Click apply and try printing
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • My HP Officejet J5780 All-in-One has stopped printing

    My HP Officejet  J5780 All-in-One keeps sending the messge" Out of paper,load paper and  then press OK to start" even though I have paper already in my tray. It will not print and I don't know why. Can anyone please tell me what the problem might be to cause it to function this way and what I can do to fix it myself if at all possible? I would appreciate hearing from anyone that might be able to help me. Thank you and have a blessed day.Sincerely, Blesseda49

    Hi
    Try the steps here  'Out of Paper' Error Message Displays and the Product Does Not Pick Up or Feed Paper
    Does this solve the issue?
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • Hp officejet j4580 all-in-one won't print from the internet.

    My officejet j4580 all-in-one printer won't print anything I try to print off the internet, nor from microsoft word.  I tried reinstalling, but it gets stuck at 94%, and it took almost 3 hours to get to that point.  What can I do?  My operating system is microsoft vista.
    This question was solved.
    View Solution.

    Hi,
    Here are a couple of things to try.  I would first start with downloading and running the Print Diagnostic Utility.  IF this doesn't clear it up, then try the document on Problems printing from the internet.
    Print Diagnostic Utility
    Problems Printing from the Internet
    See if either of these help.
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am employed by HP

  • Hp officejet 6500 all in one won't print in black

    I cleaned the printhead to eliminate clogs which had worked in past.  Did not work this time. 
    Purchased and installed a new printhead and ran a report which showed the black ink working. 
    Ink levels in all cartridges, however, were low.  Purchased new 920 XL cartridges and installed.  Ran an alignment and said it failed.
    Ran the cleaning of the printheads and then ran a report and still no black ink.
    Ran status and quality reports and now the black will NOT print (when it was printing the day before with the new printhead). 
    HELP!  Why will the black suddenly not print.  The printhead is new and the hp ink catridges are all new. 

    Hi, Jamison ~
    I had tried many of the things you noted (from the link) and at one point got an acceptable quality report (that included black) after replacing the printhead so it was particularly frustrating to then go back to no black after loading ink cartridges.  I had done the partial reset too (as I had seen that recommendation on a forum) waiting hours for it to sort itself out wasn't acceptable when I needed to print something.
    I have to admit that I finally threw in the towel and just got another printer.  I need to be able to have something reliable and tire of always sorting through how to unclog; clean; reset; order parts; get new cartridges; run through mutiple cleaning printhead cycles.  The lack of black print just seems to happen too often. 
    Thank you, though!  I truly appreciate you taking the time to write a thorough response for me.
    JFW
    Jamieson wrote:
    Hi @jfw , and welcome to the HP Forums!
    I see you are experiencing print issues.  I would like to try and help.
    It appears you have covered much of the troubleshooting already.
    I would recommend removing the ink cartridges, and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also recommend this document on Fixing Print Quality Problems for the HP Officejet 6500 All-in-One Printer Series.
    If that doesn't resolve the issue, the best recommendation I could make would be to contact HP directly.  You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide.
    Thank you for posting on the HP Forums.

  • HP Envy 5530 e-all-in-one Does Not Work With Mac

    Just bought an HP Envy 5530 all-in-one. It does not print through Safari and possibly other Mac applications. Does not frame the page properly even with "print page" and prints slower  than 1 page per minute, even with no background images. My old HP had no problem with Safari. Phone support tells me there is no driver or fix. So I will return the device. Seems crazy. I now see othr commenters saying it doesn't work with Mac. If HP's no longer works with major Mac applications, they will be returned in droves. Anyone know why or know of a fix? 

    I am having the same issue. Did you ever find a solution? 

  • HP Officejet 8600 all-in-one will not allow me to use features

    ALCON - after installing Yosemite (well upgrading) my all-in-one is not functioning. I have gone to HP's website to no avail nothing that can help. I uninstalled the software restarted my computer and restarted the printer. Updated the firmware on printer yet nothing is working correctly. I cannot scan documents nor fax. I get a message from the printer saying that the printer cannot communicate with the computer. I also have the HP assistant installed on my mac and yet still the computer cannot communicate with the printer's scanner and vice versa. I am at a loss. Any feedback would be appreciated. I really need to scan some documents and get them sent out. I had to go to my PC as a last resort. Suggestions please?

    I may have found a fix for this problem. For those who are using Mavericks or Yosemite: Uninstall the current printer driver and install the printer driver dated Oct 22, 2014 and then install a patch update. I will copy and paste the link. For some odd reason the drivers I had prior to upgrading the OS was not willing (I upgraded from Mountain Lion).
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4182&lc=en&cc=us&dlc=en&s w_lang=&product=4323648#N191

Maybe you are looking for

  • Url char-encoding problem

    I am connecting to a web-server. The URL has Japanese characters embedded in it. When run from NetBeans 6.8 everything works ok. When run from the shell, the server appears to not understand the Japanese characters. For example, if the Japanese chara

  • Change name of parameters output by code module

    Hi guys, I am calling this  code module everytime but pass different parameters as input  & get different results I want to customize the  Parameter Name  for the output parameters as they get saved in my report. & so I can be very specific.

  • N97 out of memmory (1500 exchange mails on C driv...

    My N97 gave me an out of memmory msg the other day and it has been running REALLY slowly and some times has problems showing stuff on the home screen. (like pcitures of favorite contacts) and mails in the "Mail for Exchange" box. I have 1500 or so e-

  • Date Screwed up since 10.4.9

    My apologies if this is addressed elsewhere. Since 10.4.9 Update a few oddities. 1) the Command - Option - Eject key combination for putting computer to sleep no longer functions. (No longer functions on any computer which the update was installed on

  • Olympus E-M1 codec

    Even though my Olympus E-M1 produces .mov files Premier Elements 12 can not access.  Is there a codec to download for this?