My hp officejet 4630 e-All-in-one printer won't connect to the internet

My printer was working fine. I hadn't used it for a few days. Now, all of a sudden it says it's not connected to the internet. I don't know if it's because it's giving a hardware address for MAC or if it has the wrong IP address. I can't figure out any way to give it the new IP address.
Got it fixed from the "Doctor!" Thank you, Kent!!!

OK, that all looks good.  Is the firmware updated on the router?  Have you restarted the router (pull its power plug momentarily)?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • HP Officejet 4630 e-All-in-One Printer Black Ink not Working

    My HP Officejet 4630 e-All-in-One does not print black ink but the color ink is working perfectly fine even though the ink status shows that there is black ink left. After I've changed a new black ink cartridge, it will start to work again but after one day it stop printing black ink again. I've only printed a page the previous day and the ink status shows that there's black ink left in it (close to full). I've tried the methods stated here (http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03882718&cc=sg&dlc=en&lc=en&product=5305051) but the black ink still doesn't work. So how can I solve this problem??

    Hello @3oshua,
    Welcome to the HP Support Forums!  I see you are running into some print quality issues on your HP Officejet 4630, you are unable to print in black ink, even after replacing the cartridges.
    I see you have exhausted the steps listed here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, with no success.
    Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
    If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. I highly recommend you call our technical support at 800-474-6836, to see what options they have available for you. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www.hp.com/cgi-bin/hpsupport/index.pl
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP Officejet 4630 e-All-in-One Printer

    My scans are giant (each page is taking 2-4 minutes to print).  Perhaps it's super-super hi res?  How can I change the settings so the scan still looks good but the file size is smaller?

    Hello kchewitt, and welcome to the HP Forums, I hope you enjoy your experience!
    I understand you're having issues with your scan size.  I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please let me know what you find.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HP Officejet 4630 e-All-In-One Printer problem

    I have installed all the software and ran all the tests and all areas pass. Test printing comes out just fine. But when I try to send something to the printer, nothing happens, the printer just sits there. Does anyone know what the problem might be?
    This question was solved.
    View Solution.

    I still don't believe this, but I took a chance and pulled the USB out, then plugged it back in. It worked.

  • Sent faxes show wrong date on HP Officejet 4630 e-All-in-One Printer

    The date shown on faxes I send show dates in March, 2014; the time of day is correct.
    There was nothing in the setup process that referred to dates.
    This question was solved.
    View Solution.

    That's the Date and Time on the device (that was set the first time the device is set up). You can update this info on the device using the control panel.
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

  • HP Officejet 4630 e-all-in-one - Quick Forms

    Is there a way to disable the Quick Forms on a HP Officejet 4630 e-all-in-one ?

    Hello patch123,
    Welcome to the HP Support Forums!
    I see that you are looking to remove / disable the "Quick Forms" on the Officejet 4630, unfortunately this is not possible. The Quick Forms options is a permanent option on the printers front display.
    Regards,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Officejet 4630 e-All-in-One scanner software mac os 10.6.8

    Does Officejet 4630 e-All-in-One scanner software for Mac OS 10.6.8 exist and what is the URL to download, Thanks...

    Hello tedstaley, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are looking into scan drivers.  I would like to help.
    The software is included in the full feature package.  I would recommend downloading and running the HP Officejet 4630 e-All-in-One Printer series Full Feature Software and Drivers.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HP Officejet 4630 e All in One "alignment sheet printing" but it doesn't print anything

    HP Officejet 4630 e All in One Stampa pagina di allineamento in corso... bloccata con questa scritta nel display che non riesco a togliere. Sistema operativo Windows 8 64k.  Posso aggirare il problema di stampare perchè comunque se scelgo allineamento "No" riesce a stamipare; però lei è occupata con questo messaggio ma non stampa la pagina di allineamento, così non riesco a copiare e a fare altre cose che posso comandare solo col display della stampante. Spero che ci sia qualche italiano in grado di darmi una soluzione. Grazie!

    Hi @Patti_C ,
    Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
    English: http://h30434.www3.hp.com
    Spanish: http://h30467.www3.hp.com
    French: http://h30478.www3.hp.com
    Portuguese: http://h30487.www3.hp.com
    German: http://h30492.www3.hp.com
    Korean: http://h30491.www3.hp.com/t5/community/communitypage
    Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
    Thank you for your understanding
    I work for HP. However I speak only for myself, not for HP nor anyone else

  • HP Officejet 4500 Desktop All-in-One Printer - G510a and Windows 8.1

    The drivers for this do not seem to work on Windows 8.1.  Whilst I can print no problem I cannot access the solution centre from my new laptop and i cannot scan.  It gives me the message No scan options refer to device documentation to troubleshoot.  It works fine on my old laptop which has Windows XP installed.
    NB i have tried installing from your website and when i click on install it runs for a few seconds then sends the error message that it cannot find the file.
    Does this mean that the HP Officejet 4500 Desktop All-in-One Printer - G510a is not fully compatible with Windows 8.1.  Help please I am getting very frustrated.

    Hi amp229,
    Welcome to the HP Forums!
    I see that your are getting the specified file cannot be found error, during the installation.
    Please try the following:
    1.) Check that IE pop-up blockers are turned off before downloading the installer. Internet Explorer Pop-up Blocker: frequently asked questions.
    Then try the install.
    2. If you're running McAfee Live Safe or any other firewall, please temporarily disable the "real time scanning". Turn off real-time scanning.
    Then try the install.
    3. Go to the start screen (you may also press the windows key + R to open the run box) and type %WINDIR% this should show the windows folder.
    Click on the folder and scroll until you see files. Look for a filed named "HPWINS*.DAT" (the * is for a number that varies) remove this file and try the installation.
    Then try the install.
    Hope this information helps, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • How can i print between my galaxy s4 and hp officejet 150 mobile all in one printer

    i have connected my hp officejet 150 mobile all-in-one printer to my lap top.  Now I want to connect my printer to my smartphone galaxy s4 via bluetooth but the phone is new and I am not sure next steps.  Help.
    This question was solved.
    View Solution.

    Printershare worked out great.  I have tried so many apps, glad to find one that worked for my mobile officejet printer and android s4.  Now the true test, take it on the road.  Thanks all.

  • Officejet 7310xi All in One Printer no longer connects wirelessly

    Hello all,
    My Officejet 7310xi All in One Printer no longer connects wirelessly.
    The printer does no show up while searching for it wirelessly where it had previously.
    In the past it would say that the printer (HP Series 7300) was offline.  I would remove the device through the control panel and search again.  A printer would be found as HP Series 7300 (Copy 1) . A "ghost" of the original would remain as an offline device.  I would default to the new printer icon, Copy 1, and it would work.  This happened over the course of a year without any problems.
    Now nothing is working.  The printer can't be found by my network.  I tried downloading drivers, etc. from HP but they either can't download or stop during installation. I don't know if an Windows 8.1 update affected it.
    Although the printer has a built in  network set up option, it has no installation wizard.  I can't find a way to activate the wireless feature/icon.  There is no I.P. address either.
    I feel like a monkey pulling levers for a banana!  I appreciate your help.

    Hey @Kathlanta ,
    Thank you for taking the time out of your day to ask that question on the HP Forums today!
    I understand you are having issues with your HP Officejet 7310xi connecting and staying on your network. Going through all of this is making you feel much like this;
    By the end of this I want you feeling more like this;
    Now let's get to the bottom of this and have some fun doing it! (and no, I have not completely adopted the idea that you are a monkey, but for the time being, seems most fitting LOL )
    Ok, so what we are going to start with here is; a full print system uninstall and reinstall and run it through USB to test the printers functionality.
    Here is how you uninstall the whole printer software on 8.1 >> Uninstalling The Printer
    Here is how you install the drivers offline (use the appropriate links to get your steps) >> Installing HP Printer Software for a USB Connection in Windows 8
    You wont need to worry about the wireless right yet until we figure out if the rpinter hardware is ok or not. So sit tight on that portion, I'll get that all back and working later after we figure this stuff out now.
    Look forward to hearing back from you! Have a good one!
    I worked for HP.

  • Wireless configuration for HP OfficeJet 6500A plus All-In-One printer on Ubuntu 10.04

    I have bought a HP OfficeJet 6500A plus All-In-One printer CN557A, which I want to use with ubuntu 10.04 64-bit as a wireless network printer.
    Before i bought i checked compatibility on www.hplipopensource.org and www.openprinting.org, and all was in order.
    The machine is autodetected and fully functional when connected with a usb cable, but i have not managed to get it to work as a wireless printer.
    This is what I did:
    I configured the printer on the wireless network (through the printer interface), and it connects. It prints out a "Wireless Network Test Report", and everything works. I can ping to its local ip adress, and access it through the browser. HP eprint also works.
    I installed hplip 3.11.10 and dependencies manually. I did this because the default hplip in ubuntu 10.04 did not recognise the device.
    I ran 'hp-check', which gave no errors or warnings:
    tjoff@mek-403-jakbo-01:~$ hp-check
    HP Linux Imaging and Printing System (ver. 3.11.10)
    Dependency/Version Check Utility ver. 14.3
    Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.
    Note: hp-check can be run in three modes:
    1. Compile-time check mode (-c or --compile): Use this mode before compiling the
    HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
    are installed to successfully compile HPLIP.
    2. Run-time check mode (-r or --run): Use this mode to determine if a distro
    supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
    has the proper dependencies installed to successfully run.
    3. Both compile- and run-time check mode (-b or --both) (Default): This mode
    will check both of the above cases (both compile- and run-time dependencies).
    Saving output in log file: hp-check.log
    Initializing. Please wait...
    | SYSTEM INFO |
    Basic system information:
    Linux mek-403-jakbo-01 2.6.32-35-generic #78-Ubuntu SMP Tue Oct 11 16:11:24 UTC 2011 x86_64 GNU/Linux
    Distribution:
    ubuntu 10.04
    Checking Python version...
    OK, version 2.6.5 installed
    Checking PyQt 4.x version...
    OK, version 4.7.2 installed.
    Checking for CUPS...
    Status: scheduler is running
    Version: 1.4.3
    error_log is set to level: warn
    Checking for dbus/python-dbus...
    dbus daemon is running.
    python-dbus version: 0.83.0
    | COMPILE AND RUNTIME DEPENDENCIES |
    note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
    note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
    Checking for dependency: CUPS - Common Unix Printing System...
    OK, found.
    Checking for dependency: CUPS devel- Common Unix Printing System development files...
    OK, found.
    Checking for dependency: CUPS image - CUPS image development files...
    OK, found.
    Checking for dependency: DBus - Message bus system...
    OK, found.
    Checking for dependency: gcc - GNU Project C and C++ Compiler...
    OK, found.
    Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
    OK, found.
    Checking for dependency: libcrypto - OpenSSL cryptographic library...
    OK, found.
    Checking for dependency: libjpeg - JPEG library...
    OK, found.
    Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
    OK, found.
    Checking for dependency: libpthread - POSIX threads library...
    OK, found.
    Checking for dependency: libtool - Library building support services...
    OK, found.
    Checking for dependency: libusb - USB library...
    OK, found.
    Checking for dependency: make - GNU make utility to maintain groups of programs...
    OK, found.
    Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
    OK, found.
    Checking for dependency: PolicyKit - Administrative policy framework...
    OK, found.
    Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
    OK, found.
    Checking for dependency: Python DBus - Python bindings for DBus...
    OK, found.
    Checking for dependency: Python devel - Python development files...
    OK, found.
    Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
    OK, found.
    Checking for dependency: Python XML libraries...
    OK, found.
    Checking for dependency: Python 2.3 or greater - Required for fax functionality...
    OK, found.
    Checking for dependency: Python 2.2 or greater - Python programming language...
    OK, found.
    Checking for dependency: Reportlab - PDF library for Python...
    OK, found.
    Checking for dependency: SANE - Scanning library...
    OK, found.
    Checking for dependency: SANE - Scanning library development files...
    OK, found.
    Checking for dependency: scanimage - Shell scanning program...
    OK, found.
    Checking for dependency: xsane - Graphical scanner frontend for SANE...
    OK, found.
    | HPLIP INSTALLATION |
    Currently installed HPLIP version...
    HPLIP 3.11.10 currently installed in '/usr/share/hplip'.
    Current contents of '/etc/hp/hplip.conf' file:
    # hplip.conf. Generated from hplip.conf.in by configure.
    [hplip]
    version=3.11.10
    [dirs]
    home=/usr/share/hplip
    run=/var/run
    ppd=/usr/share/ppd/HP
    ppdbase=/usr/share/ppd
    doc=/usr/share/doc/hplip-3.11.10
    icon=/usr/share/applications
    cupsbackend=/usr/lib/cups/backend
    cupsfilter=/usr/lib/cups/filter
    drv=/usr/share/cups/drv/hp
    # Following values are determined at configure time and cannot be changed.
    [configure]
    network-build=yes
    pp-build=no
    gui-build=yes
    scanner-build=yes
    fax-build=yes
    dbus-build=yes
    cups11-build=no
    doc-build=yes
    shadow-build=no
    hpijs-install=no
    foomatic-drv-install=no
    foomatic-ppd-install=no
    foomatic-rip-hplip-install=no
    hpcups-install=yes
    cups-drv-install=yes
    cups-ppd-install=no
    internal-tag=3.11.10
    restricted-build=no
    ui-toolkit=qt4
    qt3=no
    qt4=yes
    policy-kit=no
    hpijs-only-build=no
    lite-build=no
    udev-acl-rules=yes
    hpcups-only-build=no
    hpijs-only-build=no
    Current contents of '/var/lib/hp/hplip.state' file:
    # hplip.state - HPLIP runtime persistent variables.
    [plugin]
    installed=0
    eula=0
    Current contents of '~/.hplip/hplip.conf' file:
    [last_used]
    printer_name =
    working_dir = .
    device_uri = "hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW"
    [commands]
    scan = /usr/bin/xsane -V %SANE_URI%
    [installation]
    version = 3.11.10
    date_time = 2011-11-16 14:30:35
    [settings]
    systray_messages = 0
    systray_visible = 0
    [fax]
    email_address =
    voice_phone =
    [refresh]
    rate = 30
    enable = false
    type = 1
    [polling]
    enable = false
    device_list =
    interval = 5
    | DISCOVERED USB DEVICES |
    Device URI Model
    hp:/usb/Officejet_6500_E710n-z?s HP Officejet 6500 E710n-z
    erial=CN16F2402Q05JW
    | INSTALLED CUPS PRINTER QUEUES |
    B-403-271-A4-COLOR2
    Type: Unknown
    Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-Color
    B403-271-A4-BW
    Type: Unknown
    Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-BW
    HP-Officejet-6500-E710n-z-FAX
    Type: Printer
    Device URI: hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW
    PPD: /etc/cups/ppd/HP-Officejet-6500-E710n-z-FAX.ppd
    PPD Description: HP Officejet 6500 e710n-z, hpcups 3.11.10
    Printer status: printer HP-Officejet-6500-E710n-z-FAX is idle. enabled since 2011-11-16T01:00:45 CET
    Communication status: Good
    | SANE CONFIGURATION |
    'hpaio' in '/etc/sane.d/dll.conf'...
    OK, found. SANE backend 'hpaio' is properly set up.
    Checking output of 'scanimage -L'...
    device `hpaio:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW' is a Hewlett-Packard Officejet_6500_E710n-z all-in-one
    | PYTHON EXTENSIONS |
    Checking 'cupsext' CUPS extension...
    OK, found.
    Checking 'pcardext' Photocard extension...
    OK, found.
    Checking 'hpmudext' I/O extension...
    OK, found.
    Checking 'scanext' SANE scanning extension...
    OK, found.
    | USB I/O SETUP |
    Checking for permissions of USB attached printers...
    HP Device 0x5412 at 002:005:
    Device URI: hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW
    Device node: /dev/bus/usb/002/005
    Mode: 0664
    | USER GROUPS |
    lp adm dialout cdrom plugdev lpadmin admin sambashare vboxusers
    | SUMMARY |
    No errors or warnings.
    Done.
    I then ran 'sudo hp-setup', chose the device (which was detected), chose my wireless network, entered the wireless security key. On the configuration results dialog I get two messages:
    "Your printer has been succesfully configured on the wireless network. You may now unplug the USB cable"
    and
    "The Ethernet cable is plugged in which will prevent you from connecting to a wireless network. To connect wirelessly, remove the cable and try again. (VSA000)"
    There is no ethernet cable plugged in, so i can't remove it. I unplug the USB cable and click 'finish'. This makes the 'hp-setup'-dialog start over again, and the printer has not been installed.
    In the terminal i have the following:
    tjoff@mek-403-jakbo-01:~$ sudo hp-setup
    [sudo] password for tjoff:
    HP Linux Imaging and Printing System (ver. 3.11.10)
    Printer/Fax Setup Utility ver. 9.0
    Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.
    Searching on USB bus...
    GET /IoMgmt/Adapters HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    GET /IoMgmt/Adapters/Wifi0/WifiNetworks HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    GET /IoMgmt/Adapters/Wifi0/Profiles/Active HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    GET /IoMgmt/Adapters/Wifi0/Protocols HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    error: Missing response key: 'iorotocols-iorotocol-dd:dnsserveripaddress-0'
    GET /IoMgmt/Adapters/Wifi0/VsaCodes.xml HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    GET /IoMgmt/Adapters/Wifi0/WifiNetworks/SSID=mVnmXfsu HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    GET /IoMgmt/IoConfig.xml HTTP/1.1
    Host: localhost
    User-Agent: hplip/3.0
    Content-Type: text/xml; charset=utf-8
    Content-Length: 0
    I then tried to reconnect the printer usb cable and run 'hp-toolbox' and click "Wireless/wifi setup using USB". Now i get the error:
    tjoff@mek-403-jakbo-01:~$ hp-toolbox
    HP Linux Imaging and Printing System (ver. 3.11.10)
    HP Device Manager ver. 15.0
    Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.
    HP Linux Imaging and Printing System (ver. 3.11.10)
    Wifi Configuration Utility ver. 1.1
    Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.
    error: Channel write error
    error: An I/O error occurred. Please check the USB connection to your printer and try again. (Device I/O error)
    Done.
    I do not how get past this stage, and any help is welcome. 
    This question was solved.
    View Solution.

    A friendly soul on ubuntuforums pointed out to me, that the wireless configuration is only necessary when the printer is NOT connected to a (W)LAN. So all I really had to do was to configure the printer in the CUPS administation page, and it worked. Problem solved. Silly me.

  • HP OFFICEJET PRO L7680 All-in-One PRINTER does not print yellow color at all

    Last week I understood that my Printer does not print at all yellow color.
    All other colors and tests I made are ok.
    I cleared printheads, made all printing tests, and diagnostic pages.
    In every printing was missing the yellow color..
    I changed the yellow catridge with another full one, and the problem persists..
    PLS could any body help me?
    Many tks
    antpep

    Welcome to the community @antpep
    I understand your Officejet Pro L7680 is no longer printing in yellow for you, and I'd like to offer my suggestion that may help you!
    Please click on the link below and try the steps in the guide.
    Fixing Print Quality Problems for the HP Officejet Pro L7500, L7600, and L7700 All-in-One Printer Se...
    If the yellow is still not printing for you and you reach the step to "replace the printhead", please consider contacting HP's technical support to see what your options may be with them in regards to a replacement part or unit.
    HP's contact info:
    If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada,: click here.
    Have a wonderful weekend ahead and thank you for posting in the community
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Paper Jam error message due to broken gear on Officejet Pro 8500 all-in-one printer

    3 year old HP Officejet Pro 8500 all-in-one printer (haven't used it much). Keeps telling "Paper Jam" although there is no paper jammed anywhere (searched meticulously with a flashlight after watching HP's tutorial videos on how to clear paper jams). I started searching on the Internet and found a couple of related videos on Youtube that pointed me in the right direction:https://www.youtube.com/watch?v=PMFW1RRlDHEhttps://www.youtube.com/watch?v=EwbF2Vs_0gQ  I could hear a clicking noise on that area of the printer each time I turned it on, so I carefully took the black cap apart that was hidding the gear, and confirmed I had the same problem as in the youtube videos above. See picture below showing the white plastic gear part that has a large crack which causes the Paper Jam error message and renders the printer unusable. After Googling a little bit, seems like a relatively common issue and wonder why such a part like that is not made of a stronger material like metal (planned obsolescence maybe?). Does anybody know if there is a way of replacing the broken gear?  (I really care for the environment and I would like to avoid having to throw the relatively new and expensive all-in-way printer away) Thanks a lot in advance for the advice!

    Hey ,  Thanks for posting in the HP Support Forum.  I do see that a cracked gear in your HP Officejet Pro 8500 All-in-One Printer is impeding all functionality.  I would like to help you with this but that particular part is not replaceable.  I recommend you reach out to our tech support team to find out what servicing options you have available. You can click on the following link to initiate a case: www.hp.com/contacthp/
    Once you fill out the online form to create your case you can choose from different direct contact methods. I hope this helps. Regards, 

  • HP OfficeJet 6310 All-In-One printer won't print in color with new cartridge

    HP OfficeJet 6310 All-In-One printer  on a iMAC  OSX version 10.9.5 system
    Hello,
    As I don't print in color much but had need to I discovered my printer not printing in color.  I trouble shooted and even replaced with an new HP95 new from Office Depot ( I never buy refilled).  The printer still won't print color but it advances the paper as if it was printing - just no ink on paper.  I have cleaned thoroughly the ink jet heads, cartridge area, and run all the alignment and printer utilities.    The test page print does not show color either.   I have no error messages.  Don't know what else to do.
    thanks
    DH

    Hi there @dhengr!
    Thanks for contacting the HP Forums!
    I can see your having a print quality issue with your HP OfficeJet 6310.  I should be able to provide documentation that will help locate a resolution.  You mentioned you have already tried another  HP95 tri-color cartridge with no resolution.  I also noticed you said that the quality report from the printer also has no color ink.  
    If a stand alone test report is performed from the front of the printer such a printhead cleaning or print quality report and there is no color on the page then you are likely looking at a hardware issue within the printer.  I have provided a document regarding Missing, Faded, or Dull Colors on the HP Officejet 6310 All-in-One Printer.  If you follow the document from start to finish and still have the same issue then I would recommend contacting our HP tech support via phone.  They deal with hardware warranty and replacement options.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html 
    Have a great weekend and thank you again for posting on the HP Forums!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Maybe you are looking for

  • Tecra A11-11N does not boot after CPU upgrade

    Hi, I would like to do a processor upgrade for my Tecra A11 11N from the i5-430M to a probably much faster i5.I thought the i5-580M would do, but the laptop did not boot when i installed this processor. I reverted back to the 430M, did some research

  • How i can Open/run VBS file

    Hi , How i can open or run external *.vbs file from director by pressing in o button on stage i try mostly every things like:- - open "XXX.vbs" with "cscript.exe" - baOpenFile(XXXXXXXXXXXXXXXXXXXXXXXXXXX) - open moviespath (XXXXXXXXXXXXXXXXXXXX) no t

  • Access Control functionality in Oracle workflow

    Hi everyone, I am doing research into access control models and workflow systems (separation of duty policies in particular). As far as I could tell, Oracle Workflow does not provide much in terms of securing access to data in a workflow process (exc

  • Drop java class and java source

    Hi, When I query user_objects I get some java class and java source objects select * from user_objects where object_type like 'JAVA %'; How do I drop these java source and java class objects from the database I tried using the following command drop

  • How do I downgrade to iOS 5 from iOS7!!!

    I had a sinking feeling iOS7 was going to turn out badly... But still I foolishly updated my iPad 2. Now I feel like an idiot because of course it totally fubar'd my iPad not to mention when it does work it is an absolutely ATROCIOUS OS... My god...