My hp pavilion 7955 wont start only a beep

my hp 7955 worked for a few days after 2 years without use. First time after that it worked after I shook it a few times , now it wont start only prolong beep. fan and hd fan working ok

my hp pavilion 7955 at first had a beep then change memory card downloaded sp pack 3 now it starts then stops

Similar Messages

  • Macbook pro wont start with 3 beeps

    hi
    Few months back I purchased a refurbished macbook pro (late 2012 model) with i7 processor and 8 GB ram. Now after 2 months I experienced problem with mac - it wont start with 3 beeps. I looked at different articles in net and found about no memory bank problem. I opened the back and changed slots and it seemed to fix the issue. However the issue was recurring few times and ram was changed. Again the issue seemed to have resurfaced. I tried with memtest in single user mode and RAM passes the tests.
    What else could be the issue around the macbook pro. Do you suggest taking it to local Apple store to get it checked?
    Thanks

    Test each module installed alone while switching slots (power down before switching and remove battery.) Do both modules work alone in each slot? If they do, then it would appear the memory is good as are the slots. So, something else is at play and only an Apple Store has the equipment to go further - make a Genius Appointment and take it in for service.

  • Re: Brand new Pavilion 13 wont start

    My computer wont start. What do I do? Besides reading instuctions on how to ask questions.
    Also I tried using the chat but my computer was not mentioned when I typed its code which is why I tried this.
    Horrible horrible service.  Imagine buying a brand new computer that refuses to start up and several days later after asking for help and instuctions on what to do next...you receive guidelines on how to ask questions.
    Thanks Hewlett Packard! Anything else I can do? Any suggestions on how to go out of my way for a faulty product? Would you like me to bend over now? 

    Hi @Nikker ,
    Very sorry that this has happened. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link to get the support number for your region. They will be happy to assist you immediately.
    Please let me know how this goes.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Windows 7 wont start, only get bluescreen

    Hello I have a problem
    I have Windows 7 64bit
    For a game I needed to change my processor limit to one so the game wont have graphic problems, I changed it and rebooted my computer after that I had to options if i chose the option to start windows normally it loads for a while like always then the blue screen of death apears and my computer restarts if I chose let windows fix problems. It tries to fix them but with no sucess and my computer restarts again.
    I think that the problem is that my computer now doesnt have enough RAM memory to start up since it needs 2 GB. I thought I could start it up in safe mode but I dont know how to do it. BIOS doesnt help much.
    Anyone know a soloution?

    Hi,
    Do you remember making any recent changes to the computer prior to this issue?
    I would suggest you to follow the steps in the link and check if the issue persists:
    [http://windows.microsoft.com/en-us/windows7/Resolving-stop-blue-screen-errors-in-Windows-7|http://windows.microsoft.com/en-us/windows7/Resolving-stop-blue-screen-errors-in-Windows-7]
    Also check event viewer for error follow the steps in the link:
    [http://windows.microsoft.com/en-US/windows7/What-information-appears-in-event-logs-Event-Viewer|http://windows.microsoft.com/en-US/windows7/What-information-appears-in-event-logs-Event-Viewer]
    Hope this information helps you.

  • Pavilion dv6 wont start after factory recovery.

    Hello,
    I made factory reset using HP recovery manager ( try both: clean copy or factory default copy with software), and the process finish ok. But after restart windows cant start and stuck on windows logo, if I try safe mode, it stops at message: "You cannot finish the instalation in safe mode restart the PC and finish the installation" . It seems that the "first time use" installation process is corrupted. The HDD and memory tests  finish without error. Also tried the Hard reset (Unplug the AC remove the battery and hold power on for 30 sec.) but did not help.
    Thanks for help.
    OS win7 home premium.
    PN: QF448EA#BCM.

    Hi @Fil23 ,
    Thank you for visiting the HP Support Forums and Welcome.Thank you for all the information that you are seeing, a big help. 
    I have looked into your issue about your HP Pavilion dv6-6155ec Entertainment Notebook PC and issues getting past the HP Logo screen and then going into a loop.
    Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
    Here is a link on computer does not start, which has a section for the HP Logo screen.
    You could reset the BIOS with this document selecting the reloading the BIOS default settings.
    Hope this helps you out.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • HP Pavilion g6 wont start up after updating windows, no blue/black screen or fan noise

    Clicked update and shutdown on the laptop last night, tried to turn on this morning getting no response at all, power button is intact its not damaged or overheated any ideas?

    Hi @ESAWatson91 ,
    Welcome to the HP Forums!
    It is a first rate  place to find answers and information!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I understand that after doing an update and shutdown, that when you try to power it on you are getting no response at all.
    First I would try a hard reset. Performing a Hard Reset or Forced Reset.
    If that did not help, please provide some more information.
    Do see any power lights on the adapter?
    Do you hear the fan  or hard drive spin up?
    Do you hear any beeps or see any flashing lights?
    If you would like further assistance please provide your exact model, the OS and reply to my questions.
    How Do I Find My Model Number or Product Number?
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • My HP Pavilion DV7 wont boot up it beeps three times and blinks 1 time

    I have been having problems with my HP Pavilion DV7 for the last several months. When I turn it on I get a black screen. It will beep three times and the caps LED will blink one time. When this first started happening I would turn it off and try to turn it on again. Sometimes it would take turning it off and on several times before it would boot up. Now it will not boot up at all. It just does the same thing every time. When I turn the power on I can hear the fan and the beeps and see the light blink but that is all. I have even tried to turn it on in safe mode but still get the same results.

    Hi there @texashunter00 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I understand that your notebook is having trouble booting up properly, and that you are getting a beep/LED code. I am happy to assist you with this.
    Assuming the flashing code is a repeating  single flash that would indicate a cpu problem. The beeps are commonly indicating a problem with the RAM. Please see the following, and if necessary reseat the memory cards, and see if the problem remains.
    Computer does not start and the LEDs blink or the computer beeps
    If after checking through this, you are still having the same beep/led codes, I would recommend you call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • 945GCM478 wont start and keeps beeping

    Got a 945GCM478 Mobo and tryting to repurpose bits from old machines to make a new machine.
    Current Setup:
    Mobo: 945GCM478
    CPU:   P4 3.2 Prescott
    Mem:  2 x DDR2-800
    Vid:   On board.
    Sound and modem cards present.
    1 sata drive
    1 ide cd and 1 ide drive
    When I start the machine I see the fans power up (inc CPU)  and does a long beep, waits a a while and keeps going.
    The video never kicks in, just beeps. I've reset the cmos but there's no other trouble shooting info to go on. Ho on earth am I meant to work out what's wrong.
    The only thing worth pointing out is that I have a 20 pin ATX powerpack connected to the 24 pin socket, but the manual says that's fine.
    Can anyone help.
    Regards
    Simon

    I managed to get round my initial error when I swapped the memory out.
    So Now I'm beepless, however the machine starts quietly, but now there's no video signal at all. Hmmmm odd
    Help me please.
    Regards
    Simon

  • HT1212 ipad wont start

    Ipod wont start makes a beeping sound when plugged in

    I assume you mean iPad?
    If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Touchsmart tm2 notebook wont start after standby

    I have a touchsmart tm2 that shot down after I started using it from stand by and now the notebook wont start, only the battery light is showing but it won´t do anything else

    Hi
    You have a couple of options as I see it please try these steps might help you to fix your issue.
    Resolving Problems with Sleep and Hibernate Mode
    Let us know how it goes!
    *Although I am an HP employee, I am speaking for myself and not for HP.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • My mac book pro won't start only the fan starts running alone when I turn it on but no display is shown on the screnn

    My mac book pro wont start only the fan starts running when i turn it on but no display is shown on the screen

    Have you tried this yet?
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

  • My hp dv4 pavilion wont start up

      My hp pavilion wont start up...whenever i start the it takes me to the screen where it says start up repair or regular start. Whenever i press start up repair it takes like forever and it doesnt work. Whenever i do the regualr start up it loads and then it doesnt show anything...just a blank screen it doesnt even show me to the account list where u can choose which acc u wanna use HELP

    my computer works fine without that driver. and this only happened after i updated the bios and installed win 7. before updatinf the bios i could still install the accelerometer and boot back to windows

  • My macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help.

    my macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help. i've tried the command s command p command v but nothing i've tried to the safe mode then a quick restart but nothing
    disk utility give me this:
    Process:         Disk Utility [371]
    Path:            /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
    Identifier:      com.apple.DiskUtility
    Version:         11.5.2 (298.4)
    Build Info:      DiskUtility-2980400~60
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [86]
    Date/Time:       2013-11-05 03:29:41.247 -0500
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          9522 sec
    Crashes Since Last Report:           29
    Per-App Interval Since Last Report:  981 sec
    Per-App Crashes Since Last Report:   25
    Anonymous UUID:                      F6B8E263-76C8-4C7D-AA58-48134BF4BA78
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000020
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Thread 0 Crashed:  Dispatch queue: com.apple.main-thread
    0   libobjc.A.dylib                         0x0000000100c62fbc _read_images + 312
    1   libobjc.A.dylib                         0x0000000100c79721 map_images_nolock + 1266
    2   libobjc.A.dylib                         0x0000000100c62761 map_images + 115
    3   dyld                                    0x00007fff5fc039c5 dyld::notifyBatchPartial(dyld_image_states, bool, char const* (*)(dyld_image_states, unsigned int, dyld_image_info const*)) + 853
    4   dyld                                    0x00007fff5fc0c849 ImageLoader::link(ImageLoader::LinkContext const&, bool, bool, ImageLoader::RPathChain const&) + 201
    5   dyld                                    0x00007fff5fc04d54 dyld::link(ImageLoader*, bool, ImageLoader::RPathChain const&) + 118
    6   dyld                                    0x00007fff5fc08f7c dlopen + 490
    7   libSystem.B.dylib                       0x0000000100a14e40 dlopen + 61
    8   com.apple.CoreFoundation                0x0000000100d78ef7 _CFBundleDlfcnLoadBundle + 231
    9   com.apple.CoreFoundation                0x0000000100d77e97 _CFBundleLoadExecutableAndReturnError + 1191
    10  com.apple.Foundation                    0x0000000101008355 _NSBundleLoadCode + 638
    11  com.apple.Foundation                    0x0000000101007c78 -[NSBundle loadAndReturnError:] + 742
    12  com.apple.Foundation                    0x000000010101960c -[NSBundle principalClass] + 38
    13  com.apple.framework.DUSupport           0x0000000100082080 -[DUModuleManager(_private) findDUModules:] + 405
    14  com.apple.framework.DUSupport           0x0000000100081ed9 -[DUModuleManager orderedModuleListOfModules] + 40
    15  com.apple.DiskUtility                   0x0000000100006082 0x100000000 + 24706
    16  com.apple.DiskUtility                   0x0000000100005f59 0x100000000 + 24409
    17  com.apple.AppKit                        0x0000000101444625 -[NSWindowController _windowDidLoad] + 538
    18  com.apple.AppKit                        0x00000001013e1f77 -[NSWindowController window] + 112
    19  com.apple.AppKit                        0x00000001015f61d9 -[NSWindowController showWindow:] + 47
    20  com.apple.AppKit                        0x00000001015c7c5c -[NSDocument showWindows] + 98
    21  com.apple.AppKit                        0x00000001015c64bb -[NSDocumentController openUntitledDocumentAndDisplay:error:] + 340
    22  com.apple.AppKit                        0x00000001014f7b44 -[NSDocumentController(NSInternal) _openUntitled] + 111
    23  com.apple.AppKit                        0x00000001014f79ab -[NSApplication _doOpenUntitled] + 257
    24  com.apple.AppKit                        0x00000001014f733b -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 185
    25  com.apple.AppKit                        0x00000001014f6fd9 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 77
    26  com.apple.Foundation                    0x0000000100ffd0d6 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 360
    27  com.apple.Foundation                    0x0000000100ffcf06 _NSAppleEventManagerGenericHandler + 114
    28  com.apple.AE                            0x0000000104d7332b aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 162
    29  com.apple.AE                            0x0000000104d73224 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 32
    30  com.apple.AE                            0x0000000104d7312b aeProcessAppleEvent + 210
    31  com.apple.HIToolbox                     0x00000001028a0619 AEProcessAppleEvent + 48
    32  com.apple.AppKit                        0x00000001013fc095 _DPSNextEvent + 1191
    33  com.apple.AppKit                        0x00000001013fb801 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
    34  com.apple.AppKit                        0x00000001013c168f -[NSApplication run] + 395
    35  com.apple.AppKit                        0x00000001013ba3b0 NSApplicationMain + 364
    36  com.apple.DiskUtility                   0x0000000100002009 0x100000000 + 8201
    37  com.apple.DiskUtility                   0x0000000100001db8 0x100000000 + 7608
    Thread 1:  Dispatch queue: com.apple.libdispatch-manager
    0   libSystem.B.dylib                       0x0000000100a27c0a kevent + 10
    1   libSystem.B.dylib                       0x0000000100a29add _dispatch_mgr_invoke + 154
    2   libSystem.B.dylib                       0x0000000100a297b4 _dispatch_queue_invoke + 185
    3   libSystem.B.dylib                       0x0000000100a292de _dispatch_worker_thread2 + 252
    4   libSystem.B.dylib                       0x0000000100a28c08 _pthread_wqthread + 353
    5   libSystem.B.dylib                       0x0000000100a28aa5 start_wqthread + 13
    AND MORE TOO MUCH TO COPY N PASTE HELP PLEASE!!!!!

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • TS3274 my ipad does not start or reset even. when i hold both buttons only apple logo appears and ipad wont start. plz help somebody

    my ipad does not start or reset even. when i hold both buttons only apple logo appears and ipad wont start. plz help somebody

    try restoring see guide
    http://www.ipadforums.net/ipad-help/2987-how-put-your-ipad-into-recovery-mode.ht ml

  • I tried to download movies to the iPad but it only shows wait! It wont start to download!

    It only stands wait when i download movies! It wont start downloading! I have waited 24 hours and i hav got the resiet on the buy! But it wont start downloading! What to to?

    The download is from iTunes

Maybe you are looking for

  • Can I and how do I set up using to ipods on one itunes account.

    Hello, I have an itunes account and today my wife was given a shuffle, can I use the same account or do I have to set her up a new one. If so how to a download some of the songs I have on my account onto her ipod. Thank you.

  • 571 Server IP is blocked HELP!

    Good Afternoon, We recently have updated our IP address which was provided to us through SoftLayer and it appears as though in 2013 the IP had been listed as a spam account; which was two years before we were using the IP. We have gone through the ap

  • Non-transactional cursor writes block reads

    I'm opening a cursor without using a transaction like so: CursorConfig conf = new CursorConfig(); Cursor cursor = db.openCursor(null, conf); I then iterate over the items, sometimes replacing a value. I want to be able to read (and maybe write) to an

  • ***** in Full Text Search : Exception

    Hi Everybody, I have enabled the Full Text Search option in Oracle UCM but when I try to enter '*****' the system gives me an exception with full query generated and a failed message. Could I get rid of the Lenghy error message by catching the except

  • Import EDL problem

    Hi, If anyone can help me understand why this edl reads wrong? (the problem is that when the EDL is loaded it will read wrong the out timecode) TITLE: TEST FCM: NON-DROP FRAME 001 STL V C 00:01:00:01 00:01:01:03 10:01:59:15 10:02:00:17 * FROM CLIP NA