My HP Pavilion dv6-3060sa is not starting up on power plugging. Removed Battery Tried Hard boot.help

HP Pavilion dv6-3060SA is not starting up, tried hard boot but still no solution. The charger is OK. The problem is no LED blink on power connect as well no starting up of Laptop. Please help.

If you have another Mac, use Target Disk Mode. Connect your Mac to the other Mac using a Thunderbolt or FireWire cable, and hold down the T key while booting up on the problematic Mac. If you go into Finder on the other Mac, the first one's hard drive should show up as a disk.

Similar Messages

  • HP Pavilion DV6-6182NR Sound Not Working...Feel Like I Have Tried Everything

    I have a HP Pavilion DV6-6182NR, and my sound has stopped working. I've tried uninstalling then reinstalling the driver. I've updated everything. Rolled it back. Updated again. Nothing has worked. When I test the audio, it shows the sound working, but no sound can be heard...even through headphones.
    I have tried going through HP Support Assistant, but it shows everything is working.
    Could it be the sound chip? Any ideas would be welcome. Thanks in advance.

    Hi
    Please find the link given below might help you to fix your issue.
    Resolving No Sound or Audio Problems in Windows 7
    Tips for fixing common sound problems Microsoft
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • HP Pavilion dv6-6c29wm will not restore from disc that was made with HP recovery Manager

    My HP Pavilion dv6-6c29wm will not restore from disc that was made with HP recovery Manager
    Running Windows 7 64-bit on 650gb drive.
    Error: "The system media does not support this computer. You are not able to restore this system with the media."
    I'm about to order the recovery discs from HP and with any luck be able to bring this laptop back to factory conditionn with all the correct partitions and sizes after I format the hard drive.
    This question was solved.
    View Solution.

    Yes our recovery disks will return your unit to the factory state. All the software that came with the unit will be reinstalled. Whatever you added you will have to reinstall.
    I work for HP.
    Please click the White Kudos star on the left to say thanks.
    Please mark Accept As Solution if this resolves your issue.

  • ITunes does not start automatically when I plug in my iPHONE.  When I start it manually it does not recognize my phone although the phone is visible in My Computer.

    Itunes does not start automatically when I plug in my iPhone.  When I start it manually, it never recognizes the phone although it does ask if I want to download pictures etc.  Many albums have no art work that use to.  iTunes completely unresponsive to the mouse.

    Hi billm1013,
    I'm sorry to hear you are having these issues with your iPhone. If your iPhone isn't being recognized in iTunes, and/or iTunes isn't responding to your mouse when the iPhone is connected, you may find the troubleshooting steps outlined in the following article helpful:
    If you don't see your connected device in iTunes for Mac - Apple Support
    Regards,
    - Brenden

  • HT1414 My iPad Air, 32 gb will not start up. It had 97% battery charge, last time I used it. I tried connecting to my iMac but iTunes said I needed to add my password to my iPad Air, which I can't do since the iPad Air won't start up. The iPad air is one

    My iPad Air, 32 gb will not start up. It had 97% battery charge,last time I used it. I tried connecting to my iMac but iTunes said I needed to add my password to my iPad Air, which I can't do since the iPad. Air won't start up. The iPad air is one week old. Bummer, eh?

    Auld Dave wrote:
    . I tried connecting to my iMac but iTunes said I needed to add my password to my iPad Air, which I can't do since the iPad. Air won't start up.
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Hi, My iPhone will not start up . I plugged it into my iMac and it cannot find it .

    Hi , My Iphone will not start up. when I plug it into my Imac , it cannot find my phone ?

    Suggestions:  1. make sure you have the lates version of iTunes; 2. try resetting your iPhone before syncing (
    Hold the Sleep/Wake button and the Home button together for at least ten seconds until the Apple logo appears;  when you see the Apple logo let go of both buttons and your iPhone will reboot); 3. try using a different cable.

  • Hello...I´ve just updated my Iphone 4 with 5.1.1. and my Iphone does not start at all....Nothing... Help pls

    Hello...I´ve just updated my Iphone 4 with 5.1.1. and my Iphone does not start at all....Nothing... Help pls

    Have you tried a reset by pressing and holding the sleep/wake button and the home button for 10-15 seconds until the Apple logo appears, ignore the red slider.  Then turn back on. You won't lose any data doing the reset.

  • My iPod Touch is frozen on the iTunes music note logo and the USB plug picture.  Tried resetting - didn't work.  Tried restoring - didn't work.  Any ideas besides throwing it out my window?

    My iPod Touch is frozen on the iTunes music note logo and the USB plug picture.  Tried resetting - didn't work.  Tried restoring - didn't work.  Any ideas besides throwing it out my window?

    Does the iPod/iTunes go through all the steps of restoring the iPod? If yes then:
    Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
    Above from:
    http://support.apple.com/kb/TS3694

  • HP Pavilion dv6 1334us won't start after windows update, stuck in Error Recovery

    My computer is an HP Pavilion dv6 1334us with 32bit-windows 7. The computer did automatic updates and when it started up said there was another one avaliable through WIndows Updater. I installed the update and it said the computer needed to restart for the update to take effect. I choose to restart and the computer wouldn't boot back up, it boots to the 'Windows Error Recovery' screen where my options are 'Launch Startup Repair (recommended)' and 'Start Windows Normally'. When I select the repair, it says it loads windows files, then goes back to the error recovery screen. When I choose to start normally, it freezes the second it trys to start, flashes a blue screen and then returns to the Error Recovery page again.

    Please follow the steps in the following document to troubleshoot and fix the boot issue that you are facing.
    Overview of Troubleshooting Startup Problems (Windows 7, Vista, XP): http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443371&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
    Please let me know the results so that I can try helping you further. Thank you.
    !-------------------Please click the white star in the blue box to give KUDOS if this answer was helpful or clarified your question or issue.
    If my answer solved the issue, then please click on the Accept as solution button. Thank you-----------------------------------------------------------------!
    I am an HP Employee but I am not speaking on behalf of HP. The opinions and views that I express here are my own.

  • Pavilion dv6 6169sl does not restart after installing video driver

    Hi, I reinstalled windows 7 (64 bit) on my Pavilion dv6 6169sl.Then, I downloaded the video driver from the hp website and, when I restart the pc in order to complete the installation, it doesn't start, but the system stops showing the windows logo.Can you suggest me a possible solution to this problem? Thanks a lot.

    , Hello and thanks for posting on the HP support site.  The first thing you will want to do is boot into safe mode.  Here is a link to help you with this. HP Notebook PCs - Entering Safe Mode (Windows 7) While in safe mode you will want to do a system restore back to before you tried updating the driver. HP PCs - Performing an HP system restore (Windows 7) Please let me know how this goes.  Thanks again for posting and have a great day.

  • Pavilion dv6-6c35dx - Sound not working after a HP Support update

    Pavilion dv6-6c35dx with windows 7
    I recently did a factory reset, and with the reset had to do all the updates. One of those updates from the HP Support assist was IDT High Definition Audio CODEC version 6.10.6381.0 on driver stwrt64.sys. And with that update i no longer have sound. When i put the cursor over the sound icon on the toolbar it says no headphones or speakers are plugged in. I already tried disabling and re-enableing the AMD HDMI output audio device through the control panel menus, didnt work, also it says its not plugged in. When i go into the hp supprt assist, to troubleshoot, to audio and sound, the status on the IDT says Error(52).
    How do i fix this?

    Hello everyone,
    Thanks for posting on the HP Forums!
    It would appear that you two are experiencing different issues. I will definitely address both of you!
    First, I feel it would be wise to perform a System Restore. You can return the computer to a point before the issue existed. Here's how to do it: Using Microsoft System Restore (Windows 7)
    If that doesn't work, then look at the below suggestions:
    *Before any real troubleshooting, please put your computer in a clean boot state. This should prevent third-party programs from interfering. This document provides information on how to do it: How to perform a clean boot in Windows*
    *Next, unlock a new Administrator account, so we can troubleshoot on a clean account. Open Command Prompt as Administrator, and hit Enter after typing the following: net user administrator /active:yes
    You will be able to log out of your current user account, and log into the Administrator one.
    *Finally, make sure all of your Windows updates are complete:
    1. Open "Windows Update" in Control Panel.
    2. Click "Settings", and then click "Install optional updates".
    3. Next, click "Check for updates".
    If that step doesn't work, then look below for the appropriate troubleshooting:
    @epicness50 , you need to perform all of the steps in this document: No Sound from the Speakers (Windows 7)
    Also, since there is a Device Manager Error 52 issue, you may want to look here for additional information and suggestions: Code 52: Windows cannot verify the digital signature for the drivers required for this device
    *The above Microsoft document is for Windows Vista and Server 2008, but the troubleshooting can be done in Windows 7.
    @LENNY12 , you mentioned you uninstalled and reinstalled Support Assistant. However, I'm going to ask you to do it again, but with a little more troubleshooting to address what could be causing the issue.
    Source of the troubleshooting is my own post: HP Support Assistant Windows 8.1
    Uninstall your version of Support Assistant in Control Panel, Programs and Features, then restart the computer.
    Solution: Download Support Assistant from its own special home
    1. Click on the following link: HP Support Assistant. It will bring you to the following page:
    2. Click on "Notebooks, laptops, netbooks " under "Download HP Support Assistant". It will prompt you to download it. So save it, then run it AS ADMINISTRATOR.
    If either of you are still experiencing issues,  I would perform a System Recovery to reinstall Windows. This will rule out which of the above options are to blame.
    First, you should backup your data. I will provide information on how to do that: Backing Up Your Files (Windows 7)
    Once this is done, it is safe to do the System Recovery. Here is some information on how to do this: Performing an HP System Recovery (Windows 7)
    Thanks and have a great day!
    Mario
    I worked on behalf of HP.

  • Hp pavilion dv6 hardware switch not working

    i have migrated from win 7 to win 8.1 and i had issues with my wireless and sound switches:
    wireless radio button isn't controlling wifi, it turns red and blue but wifi is always on, till i disable it using windows switch.
    The mute button works but the light is always off, usually it turns red when i mute the sound
    and finally, i can't lock the mouse touchpad
    Product name: HP Pavilion dv6 Notebook PC
    Product number: QA977EA#ABF

    Hi Bida,
    Welcome to the HP forum!
    Great job on supplying you product number and Operating System!
    HP has not tested Windows 8.1 on your notebook, therefore does not supply recommended drivers.  Therefore it is unknown how it will perform.
    Downloading or Updating Software and Drivers for HP Computers  Please note the section on "Getting updates from the maker of the software or hardware"
    When I checked the HP Pavilion dv6-6156ef Entertainment Notebook PC Drivers, I do not see a wireless button driver.
    Windows 8.1 does have a built in troubleshooter you could try.
    Press the Windows  key + C to open charms
    Type  Control Panel in the search bar and press enter
    Open the Control Panel
    Open troubleshooting  and follow the on screen options.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • HP Pavilion DV6 external mic not working

    hi, i have a hp pavilion dv6 and my external microphone is not working.
    my laptop can detect it but it doesnt work. i tried all the ports and none of them work so i dont know what to do.
    i hope someone knows how i can fix this
    thanks

    Hi RutmerDV, and welcome to the HP Support Forums! 
    I see that you are having an issue with your external microphone working on your HP Pavilion DV6 notebook. To better assist you, could you please tell me the full model number or product number and what operating system is running on it. Here are some guides for How Do I Find My Model Number or Product Number?  and Which Windows operating system am I running?
    I am also including this document for Resolving Microphone and Line-in Problems (Windows 7) in hopes that the steps will resolve your issue.
    I hope this helps, please let me know how it goes.
    Thank you and have a great day!
    I worked on behalf of HP.

  • Pavilion dv6-3227cl sound not working

    Hello, I booted up my computer today to no sound. The last time I used it, which was two days ago, the sound worked perfectly, but now the sound is not working at all. I have tried headphones and speakers, nothing works. I have tried to do a system restore to when it last worked, tried installing a new driver, and I am still getting no sound. It could be that I installed the incorrect driver or didn't install it correctly. Thanks in advance for any help, I will put my system info below.
    HP Pavilion DV6- 3227cl Entertainment Notebook
    Serial Number-{Private Information Removed}
    Product Number-  XG867UA 

    Hi
    Please find the link given below for the driver & also update the Bios.
    Audio Driver
    Bios Driver
    Incase this does not resolve your issue kindly run a recovery before this kindly back up your data as it will lost.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Can someone tel me why my Hp pavilion dv6 bluetooth can not dictect others device?

    can someone please tel me why my Hp pavilon dv6 bleutooth can not dictect any device and no device can see my laptop and i have on everything about the bluetooth

    Hi Allover,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion g6  notebook and using Bluetooth Devices. Here is a document on troubleshooting Bluetooth Devices.
    Hope this helps.
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Maybe you are looking for