My HP Pavilion p7-1439 with Windows 8 will not add Bluetooth Devices.

My HP Pavilion p7-1439 with Windows 8 will not add Bluetooth Devices.  I ran all available updates using HP Assistant. The BT devices work with Laptop, iPhone, Surface and Ipad but not the HP Desktop.  I can access the Add Device button and the system searches but never finds any BT devices.  Any thoughts?

Hi NumberTumbler,
I would like to help you with your Bluetooth issue. 
In this document Understanding Bluethooth Wireless Technology go to the section "Setting up a Bluetooth Device" for detailed information about setting up  Bluetooth devices on your computer.
Let me know if this helps or if you need any further assistance.
Thank you,
I worked on behalf of HP.

Similar Messages

  • I was prompted for an Itunes update 11.?.? and my laptop (with windows) will not open i tunes now the itunes app

    I was prompted to update my Itunes with version 11.?.? and now I can't open Itunes.  When I tried to download the itunes app off the internet I quit after asking for me to verify Iapple devices.  What am I doing wrong?

    Hello Capt1961,
    Thank you for the details of the issue you are experiencing with installing the latest iTunes update.  I recommend following the steps below:
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
    You can find the full article here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT201205 iPhone 5 is stuck in searching mode. Will not recognize bluetooth device.

    How do I get my iPhone 5 to recognize my Jabar bluetooth? It just gets stuck in searching mode.

    Turn the phone off and take the SIM out and put it back in. The other possibility is that your SIM is defective.

  • I have a Pavilion dv7-1050ea with windows vista home premium 32bit.Windows will not start

    Windows will not start in safe mode just back to blue screen error. HP recovory disks not working even in external drive. no access to command prompt. unable to install or run programs or copy any files to the hard drive. ran start up tests Memorypassed Primery hard disc passed Hard disk passed smart hard disc passed.

    I would recommend performing a system recovery.
    Here is a link with the information that is needed to perform this: http://goo.gl/bbxlv
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Pavilion dv5 - 1217AX with Windows 8 - multiple booting and crashing issues

    I have a Pavilion dv5 - 1217AX with Windows 8 operating system. It was upgraded from Vista to windows 8 last year and it worked really very well for about 1 year. Here are the issues I am facing these days
    1. When powered on - Caps lock and Num lock LEDs keep flashing twice and the sequence keeps repeating - I checked the error code on some forums and it sounded like BIOS issue so I flashed the BIOS F38 again (SP46501) but it didn't help. I also thought it could be a memory issue so I removed the memory module and cleaned the slots and fixed the modules again but no luck. I also tried running the laptop using only one module, tried both the modules one by but no changes in error code. Then I thought it could be a toy bettery issue so replaced the toy batter that fits on the motherboard but no luck. I have also tried booting up removing the laptop battery pack but no luck.
    So how does it boot now? - Once powered on I keep getting Caps lock Num lock LED flashing issues every time. Then I power off using power on/off button on laptop around 15 times or more then the laptop somehow boots up. There is no fixed pattern, sometimes it boots after 15 attempts, sometimes 50 attempts.
    Whats happenes after booting? - Sometimes the screen goes completely blank without any error message on the screen. Sometimes Windows 8 crashes and laptop restarts, when it restarts I never see LED flashing issues (surprising). It crashes when I am watching some videos or playing some games, so looks like ATI Radeon driver issue (driver is 8.970.100.7000 for HD 3400 display card).
    Let me know if there are any suggestion to fix the botting and crashing issues faced.

    Hi Expertit ,
    At first sight ,seems to be a boot issiu.Did you thry this?
    Booting into the Windows 8 setup, select “Repair your computer” in the bottom part of the window, then “Troubleshoot” and “Advanced options”. Here I was given a good reminder of another cool Windows 8 feature. If you have a restore point created you can go back to that working copy of the OS without losing your data.
    So the first thing you will want to try is the Automatic Repair.
    If that fixes your boot problem, you had it easy and go on to create a restore point for another time you are out of luck. If Windows is unable to fix your issue, read on.
    Go back to the Advanced options and choose the Command Prompt. Going for the next easiest way to fix the problem, enter the following four commands into the prompt:
    bootrec /fixmbr
    bootrec /fixboot
    bootrec /scanos
    bootrec /rebuildbcd
    After receiving a success confirmation. Close the CMD window and restart your PC.
    If you are booted into Windows, excellent! If not, let us know , so we can try some more solutions.
    2.If your video crashes , it is probably wrong Catalyst settings.Right click on screen , open Catalyst control settings , set it to high (Radeon) performance.
    Expecting your next post.
    <<<-------***
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Help! my windows PC with Vista will not dowload itunes 10.7.  It gives me an error message: Your system has not been modified

    Help! my windows PC with Vista will not dowload itunes 10.7.  It gives me an error message: Your system has not been modified.I
    I have tried unistalling the current version I had which was 10.6.3, defragging and running a security scan. Now, the highest version I can get is 10.4.1. for some reason I cannot dowload itunes 10.5 or higher as it gives me the same message which is what I need to connect and update my iphone.  Anyone facing the same issue or can point me in the right direction?

    You may get better information on that error message by reposting in the iPhone forums:
    iPhone
    It's also possible that newer iPhone updates want an OS higher than Tiger. Post the specs of your computer and we can see if an OS upgrade is possible. There are a large number of G4 variants with different capabilities, so giving us something more than  just "G4" will get you help faster.

  • Windows will not load on a Satellite A350 with 500GB Seagate external HDD

    There is an issue with this A350-043 Laptop running Windows Vista Home Premium 64Bits, part number : PSAL6C-04S015
    Simply put: when connected to a SEAGATE 9NK2AL-510 500GB SATA DRIVE EXTERNAL USB (s/n: 5QG1YH1E) Windows will not load, it goes upto and freeze just prior to the green moving bars. If the USB cord is pulled out and put back in for a second, Windows continues to load normally and all is well.
    Otherwise, the OS will take up to 15 minutes to load. Looking in the BIOS features, there is no option to boot from USB available, so it cannot be disabled. I have upgraded the BIOS of the Toshiba to the latest version with no change in that issue.
    I have tested and confirmed that the issue persist no matter which USB port is used.
    The external drive is fully fonctional and there is no errors or issues with it when Windows is loaded. I am reported this issue to Seagate as well as Toshiba in the hopes that a solution can be offered on that, but did not hear back on anything as yet.

    You mean the notebook needs 15min to load the Windows OS even if the external HDD is not connected?
    This sounds weird and I doubt this can be related to any software issue
    First of all you should check the booting order in the BIOS the USB should be set at last or second last position.
    Secondly you should check if the same issue would still persist after an new OS installation in some cases the booting procedure could be affected due to installed software and background processes.
    But if the new OS installation does not help and if the issue will still persists then I assume that an hardware problem (motherboard????) could be the reason for that and therefore an notebook technician should be contacted!!!
    Thats my opinion

  • The addons window will not close, and comes up with firefox

    I recently re-installed java, and when i opened firefox the add-ons window opened with it. the Add-ons window will not close without closing firefox, and turning the pc off, using ctr+alt+del wont work. any assistant will be greatly appreciated

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    See also "Corrupt extension files":
    * http://kb.mozillazine.org/Unable_to_install_themes_or_extensions

  • Safari for Windows will not log into IIS sites with Windows Authentication

    Safari for Windows will not log into IIS sites with Windows Authentication enabled. The IIS log has thousands of login attempts from Safari that result in 401 errors.
    I disable Windows Authentication on IIS and it works fine. The problem with that is that my Windows clients stop working properly with seemless logins when I disable this.
    The expected behavior is that Safari will work with basic authentication when NTLM does not work. That would result in a password prompt followed by a successful login instead of Safari stopping at "Loading" while hammering the IIS logs.
    It does this on all machines that I have tried.
    Any ideas or is this a bug?

    I noticed that as well. I have to wonder if it's due to not making note of the the different end of line characters between Mac OS X and Windows in code.

  • Autoplay window will not open when I connect Iphone 6 plus with Ver 8.1 and running windows 8.1 on pc.

    Autoplay window will not open when I connect Iphone 6 plus with Ver 8.1 and running windows 8.1 on pc.

    Hi, sstroec,
    How about your problem now? Is arnavsharma's suggestion helpful? If you need any further assistance, please feel free let us know.
    Roger Lu
    TechNet Community Support

  • Touch pad light doesn't respond to fn spacebar on Pavilion dv7-7012nr with Windows 7 Home premium 64

    Touch pad light doesn't respond to fn spacebar on Pavilion dv7-7012nr with Windows 7 Home premium 64.  Bought it new from HP.com in October and it has never worked.

    Hi,
    I belive that action OR f5 is for the backlit keyboard, not the touchpad. For the touchpad (my machine is also a dv7-70xx) you need to touch the switch (rapidly twice) which is on the left corner of the touchpad. The following image shows where is the light (yellow circle) and where is the swich (red rectangular):
    Hope this helps.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I right click on link, click, open in new window, then nothing happens. Or, windows within a page will not open, for example, on gmail, when I click "details" the window will not open.

    When I right click on a hot link, then click, open in a new window, a window will not open. Alternatively, I can click, open in a new tab, and a new tab will open. Additionally, if I'm at a website with a chat feature, the chat window will not open, or, as another example, if I'm at gmail, and I click "details", the window that opens giving the summary of when your account has been opened and the IP addresses it's been accessed from, will not open.
    I have on the computer, Aurora too. I doubt that it's a source of the problem, but I had to throw that into the mix. For clarification, this problem is happening while using the Firefox browser.

    You can middle-click a link to open the link in a new tab.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Open link in new window will not work

    I am running Firefox 3.6.12 on Windows XP and have never had a problem until just recently. If I right click and select "open link in new window", a new window will open, but it is blank. This started about a week ago while playing Pogo...the game rooms will not load because they open in a new window. Now I am noticing that it is with everything, not just Pogo.
    I have tried checking and unchecking the "block pop-ups" option and the new windows will not load either way.
    Any help would be appreciated!!!
    Thanks!

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Facetime window will not close. (iPhone 6 iOS 8.1.3)

    Recently and quite frequently, after a FaceTime call has ended the window will not close out to the normal FaceTime call history screen. Even when I double tap the home button to close out apps, the FaceTime window, still showing my live face and "call with whomever as ended or ending" (it switches between ended and ending when clicking back on the window) will not swipe closed; it just moves up and right back down. I can't even swipe it closed during a live FaceTime as I could before. The only way I've been able to close out the FaceTime app is to power down the phone then turn it back on.
    Anyone else experience this? Any suggestions?

    Hello nelly_eastside,
    Welcome to the Apple Support Communities!
    I understand that your FaceTime application is not fully closing after a call. In this situation, I would recommend forcing the application to close and then resetting your iPhone. To complete these steps, please follow the instructions in the attached articles. Please let me know if the issue continues.
    Force an app to close in iOS - Apple Support
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Have a great day,
    Joe

  • Firefox will not open. Process runs, but browser window will not open.

    I am unable to get the Firefox browser window to launch. The application will attempt to open, but the browser window will not appear. Task manager indicates that the process is running, it just will not launch the window. No amount of restarts or reboots will make a difference. The strange thing about this is that Firefox has never run. This is a new computer and this issue has been a problem since it was first plugged in.
    Troubleshooting steps attempted thus far:
    1) Attempted to open in safe mode - will not open
    2) Attempted to run in administrator mode- will not open
    3) Completely uninstalled application, including profile info and reinstalled
    4) Uninstalled known conflicts - Skype 4 (do not have Norton)
    5) Even though issues since new, I ran a virus scan just in case-nothing
    6) Uninstalled Chrome which I installed after originally being unsuccesful at getting FF to install (I uninstalled it before I began all of these troubleshooting steps as I have heard of conflicts)
    I am now at a loss and willing to try any other steps that you guys can suggest.
    Computer is running Windows 7 pro 64 bit. Running McAffee virus software. There are three identical computers in my office, purchased at exactly the same time with the same configuration. Mine is the only one that will not run firefox. Sadness. Please help, pleeeease...

    Win 7 with iTunes installed - I was also having problems with that.
    "netsh winsock reset" at the command prompt resolved all issues and Firefox launched normally.
    Check to see if Winsock is corrupted. May prevent FF from communicating with the web and consequently fails to launch properly - for my situation was not a firewall or antivirus block!
    http://support.microsoft.com/kb/936211#LetMeFixItMyselfAlways
    Click Start, and in Start Search, type cmd.
    Right-click the cmd entry that appears in the search results, and then click Run as administrator. If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
    At the command prompt, type the following, and then press ENTER:
    netsh winsock reset
    Then, you should see the following message:
    Successfully reset the Winsock Catalog. You must restart the computer in order to complete the reset.
    Restart the computer.
    Note If you receive an “Access Denied” error message instead of the message that is mentioned in step 3, the command prompt was not correctly elevated. In this case, close the Command Prompt window, and repeat steps 1 through 3. Make sure that you correctly implement step 2.

Maybe you are looking for