My hp photosmart c4795

hello there ,  Im christopher .
    I have a hp photosmart c4795 and i download 3 years ago the softward the hp Solution Center  know its not in my computer. I can't find my cd for it . so i would like to know if you guys have one or where do i get one.
      thank you so much for listing to me.

Hi christophe62,
Welcome to the HP Forums!
I see that you are looking for the software for your HP Photosmart c4795.
Please take a look at this web site. HP Photosmart C4795 All-in-One Printer Drivers.
These links will help you find the right software:
Which Windows operating system am I running?
OS X: Finding your OS version and build information.
Hope this information helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

  • Saving scanned doc error message when using Mac Maverick with HP Photosmart C4795

    When I use HP Scan to scan documents with my HP Photosmart C4795 it scans fine.  The problems comes when I try to save the scanned document. I get one of two things, an error message or black document.  I get an error that states "An error has occurred saving the file because it could not be written to.  Check the properties for the file to make sure it is not read-only.  I know that's the location is not read only because I save documents there all the time from other programs.    When I get the black document, I open the file and its a black page with white lines going across.  
    This started happening when I upgraded to Maverick.  When I had snow leopard I didn't have this problem.  I looked for update drivers and there aren't any available on the HP software & drivers webpage.  HP help! Any suggestions please help.

    Hi,
    That happens due to lack of compatibility of the HP Scan application for your device with Mavericks, it is not intended for the operating system and will cause issues while saving a file.
    Be sure to run Software Update, then scan using Image Capture or Preview as listed below.. those are the scan solutions provided for Mavericks:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03550518&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    Once you launch Image Capture, I would suggest keeping it on the dock for easier access.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Photosmart C4795 won't print (most of the time)

    I have a Photosmart C4795 installed on two computers, one with XP, the other Vista. The installation(with the Vista computer) went smoothly, along with all tests and some documents of my own, and on the XP one. After a few months it started giving me a "paper not found issue". I discovered I needed to push hard enough to get the paper in far enough, but not too far. Now (on the XP computer) it says its printing, pulls in the paper and then sits until I get an error message on my computer. I went through all the guided solutions and none worked. The XP computer is an HP Mini 1000, and updating HP doesn't change anything.
    This question was solved.
    View Solution.

    I managed to get it working by sending the document a second time, then cancelling the errored print job on my computer, and after it was cancelled on the computer cancelling on the printer. The moment the paper ejected I placed it on the paper tray at a point an inch away from where I was told to in the animations. Then it started on the second print job and worked (it stopped because I only had one page, but resumed when I placed the paper at the same spot and pushed OK.) If the whole problem was in fact where I was placing the paper I wish the animations would show proper positioning.
    If anyone needs assistance or clarification on how I made it work again please reply.

  • Resetting SSID on Photosmart C4795 in Apple Environment

    Hi all -
    Our old wireless router kicked the bucket so we bought a new one, which has a different SSID and password than the old.  Now my Photosmart C4795 won't connect to the network.
    I've looked all over for a place to reset the settings, but I can't find it.  I've unplugged the printer forever and still nothing.  It saves the old SSID and there's no wizard.
    I have two Macs - an iMac and a MacBook Air - and I can't get anything to register for adding a new printer.
    Please help!

    First, on the printer control panel go to Setup [Scan] > Network > Reset Network Defaults.
    Now, if your new router has WPS (look in its manual), you can start the WPS process in the same network area of the printer control panel.  Then, within two minutes, press the WPS button on the router and the two will connect!
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP Photosmart C4795 Wireless Setup (Error Messege: Device Not Connected) Help?!?

    I've had my HP Photosmart C4795 since 2009. I've haven't had any major issues with the printer until recently (probably time to get a new one).
    This is my issue; the printer can't connect to my network. I'm able to print via USB from my Mac or PC. But I'd like to be able to print from any computer on my home network. In the past I've setup the printer to network with minor issue. I've had issues ever since the Mountain Lion Update (running version 10.8.3).
    I've attempted to try once again to connect the printer to the network and I get an error message from my the HP Installer software (Device Not Connected). I've tried to troubleshoot the printer with no luck. These are solutions I've tried
    1) Uninstalled HP Installer Software/Setup via Mac  - I added the printer using the latested instructions provide from HP Supports section. I set up the printer but I can't it isn't showing up on any other computer.
    2) WPS - My router (supplied by Comcast) couldn't find the printer. I used routers login website to connect the printer but it didn't work.
    3) I've printed out the HP Network Configuration Page and manually add the printer's MAC Address to list on my router's devices list. I still can't connect wirelessly to the printer.
    I've connected this printer wirelessly in the past before the Mountain Lion Update. Can anyone help?

    First, on the printer go to Setup [Scan] > Wireless > Restore Defaults.
    Then, set the printer up using WPS (pushbutton) - start it in the printer (Wireless menu) first, then the router within 2 minutes of starting it on the printer.
    There is no HP software for 10.8, so you need to uninstall it.   Uninstall the software using the 'scrubber' option:
    Go to Applications/Hewlett Packard/ click on HP Uninstaller
    Click on Continue
    Highlight your device on the left pane
    Press and hold Control + Alt + Cmd keys on the keyboard simultaneously while you click on Uninstall This IS the Scrubber Option, there is no button labeled "Scrubber"
    There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
    Click Continue and let it finish
    Download and install this: http://support.apple.com/kb/DL907
    Restart your Mac.
    Now reset the printing system:
    - Sys Prefs, Print & Fax
    - Right (control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I have a hp photosmart c4795 all in one printer and i need the driver and software for vista os.

    install is for a gateway laptop NV5214U. I did asearch on hp website but it responded the it could not find any drivers for the hp photosmart C4795 series all-in one printer.HELP

    Ok from here: http://support.hp.com/us-en/product/HP-Photosmart-​C4700-All-in-One-Printer-series/3794613/model/3940​...
    First, select your operating system Microsoft Windows Vista (64-bit).
    Click Submit.
    Click the blue Download button.
    Click Next, then follow the prompts for the HP Download and Install Assistant.
    Let me know if you need any more help or if this solves your problem!
    Thanks,
    -hjs_19 *I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos Thumbs Up" on the bottom right of this post to say "Thanks" for helping!

  • Trying to print photos from iPad using iPrint to to my Photosmart c4795.

    I have been trying to print photos from iPad using iPrint to Photosmart c4795. keed getting error message "not enough memory to complete operation".

    If you power your ipad down then turn it back on that should fix the issue
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

  • Unable to connect Photosmart C4795 to secure wireless home network

    I recently purchased a Photosmart C4795 for use on a secure home wireless network that only has two laptops on it.  I am using a Belkin G Wireless Router and Windows XP as an operating system.  The network uses WEP privacy, and I have I know I have to do something with the passphrase and the printer...but I just can't figure out where or how.  This is how my problem goes:
    I followed the setup wizard, and press the WPS button on the router when prompted.  The printer's blue light turns on, and I proceed to  choose the "Wireless network connection (802.11)" option to connect the device.  I then select "No (or not sure), my printer is connected to my network.  Help me to setup the wireless network connection for my printer"
    From there, I connect my laptop to the printer via USB as prompted, and the wizard begins installing several components (x/9) but always gets stuck on step 6 for a few minutes, and then says "Printer Setup has failed to complete."  After retrying this a couple times, my only choice is to check "Continue the installation without connecting to the printer now, I will connect later" and click Next.  The wizard ends, saying I'll have to add the device later, so when I go that option I once again choose "Wireless network connection"  From there, it gives me a blank printer list.  No printers, let alone the one I want, show up after Refreshing.  So when I click "my printer is not listed" I'm then back at square one where I am prompted to USB connect the printer and it just loops over the same errors. 
    Does anyone please have some advice or opinions?  I've tried calling customer support and I've browsed the forums, but I haven't found the solution and I'm just pretty confused.  Any help at all would be greatly appreciated.

    Let's add the printer manually. 
    Verify that you can browse to the printer's internal web page by its IP address into a browser.  (The IP address is on the Network Config Page that you can print from the printer's front panel).
    1. Click "Start" button --> Printers and Faxes.
    2. Under Printer Tasks, click "Add Printer".
    3. Click "Next" button on the Add Printer Wizard window.
    4. Select "Local printer attached to this computer". Deselect "Automatically detect and install My Plug and play printer". Click "Next".
    5. Under Select a Printer Port option, select "Create a new port" and select "Standard TCP/IP Port" and click "Next" button.
    6. In the "Welcome to the Add Standard TCP/IP printer port wizard" make sure that the printer is turned on and connected to same network that your computer is connected to. Click "Next" button.
    7. Under "Add Standard TCP/IP Printer Port" enter the printer's IP address. Click "Next" then click "Finish".
    8. Now, select HP from the list of manufacturers, select your printer from the list of Printer models and click 'Next' button.
    9. If you can't find your printer, you'll need to find the install CD and use the "Have Disk" option to select one of the hp*.ini files. Alternatively, you can select another HP printer model that is a similar type (series).
    10. Add the print spooler name and click "Next".
    11. Click "Next"
    12. Click "Next" and then "Finish"
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP Photosmart C4795 USB to Acer laptop with Vista turns itself on every hour.

    HELP - during the last week my printer (HP Photosmart C4795 All-in-one has been starting up and sounds as if it printing something, but never takes paper in and then goes back to sleep.  Right before this happens, my computer makes a device connected and device disconnected sounds.  I have not downloaded any programs in the last month, nor have I made any changes to my printer.  It is very annoying when I am running a program and all of a sudded it ties my computer up to "do it's thing".  Help???????
    Oh - I guess I'm supposed to give my computer savvy status.  I'm not a beginner, but not an expert.  I can usually follow directions really well but do not know how to trouble shoot things on my own.
    Thanks in advance,
    Micki

    Hi there mickirom,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using? In the mean time try moving the USB to a different port to see if the problem persists.
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Mac 10.9.4 : hp photosmart c4795. scan error. try scan from computer or see documentation. press ok

    I have a Mac running Mavricks which the wireless printing works with my HP Photoshmart C4795 Printer but the wireless scanning to my Mac is not working. I am getting the error: "hp photosmart c4795. scan error. try scan from computer or see documentation. press ok" 
    It used to work. I've downloaded and installed the patch for Mavericks.
    I have searched for other solutions but none are for a Mac to do a diagnostic test on the HP page. 
    Any solutions to make this feature work again?
    Thanks!

    Hi,
    Scanning from the front panel is no longer available on Mavericks as there is no Full Feature Software for the operating system.
    Using the provided solution, you may scan using Image Capture. preview or Printers & Scanners.
    Below you may find the steps to scan on 10.9:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03550518&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Photosmart C4795 - power screen issues

    HP Photosmart C4795 - Windows 7 - My printer menu screen is frozen in a set-up mode.  I can still print from my computer when plugged in, but anything else is telling me my printer isn't ready.  I think it might have resulted from a power surge but I've since changed the surge protector, reset the power cord, swapped out the power cord and plugged directly into a different outlet and nothing seems to fix it.  Any help is appreciated.

    Hey @apaggs ,
    Thank you for joining us on the HP Forums today, hope you enjoy your time with us!
    I gather from your post that you have a frozen screen on your printer after a power surge and you are wondering if you are going to be able to recover the printer from that issue.
    Unfortunately the printer display is permanently broken. The printer will no longer be able to perform its screen functions.
    If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
    I hope this helps.
    I worked for HP.

  • HP Photosmart C4795 Failed to find device driver

    Hi all,
    I am stumped! I have a HP 2000 Notebook PC with Windows 7 64 bit and I am trying to install my HP Photosmart C4795 all in one printer.  Before I was able to use my laptop with the HP Photosmart C4795 printer, but don't know why recently I cannot use it anymore.  I thought it was a virus issue so I installed an antivirus software and ran a few sweeps, removing all the malwares and threats.  Note: My laptop is up to date with all the Windows Update.  I tried deleting and downloading the most recent driver for the printer and re-install the software but no luck.  It will install the software, but at the end it just says fail to install device driver.  I tried all the troubleshoots and still nothing.  I don't know why but I use to be able to use it, but all of a sudden it wouldn't anymore.  I have another laptop (Compaq) and it will connect to the printer, just not my HP laptop. 
    Please, any help is appreciated. Thanks

    Hi rheu83,
    I understand that you are having a problem getting the Photosmart C4795 printer connected to your HP Windows 7 NoteBook. I will try my best to help you resolve this issue.
    Download and run the HP Print and Scan Doctor to see if it is reading your printer as being installed and working.
    If not, then I recommend using the HP Officejet Pro Software and Driver Removal Utility to remove all the software and drivers from your NoteBook. DO NOT run the Level 4 as it will remove software that needs to be on your HP NoteBook.
    Then use the HP Printer Install Wizard for Windows to find and download the software and drivers for your printer.
    I hope this information helps. Please let me know how it goes.
    Thank you,
    I worked on behalf of HP.

  • Photosmart C4795 Scanning Problem

    When I try to scan with my C4795 I get an error message. I am sure the problem is with the all-in-one device. I have tried reinstalling the driver and still get the error. Before I return the all-in-one I want to make sure I am uninstalling the old driver properly. I have removed the USB & dragged the driver from the applications folder & then reattaching USB & install new driver. Is this the proper method? By the way, print & copy work fine.

    jamschwab,
    . . . I get an error message.
    What is the text of the error message?
    Before I return the all-in-one I want to make sure I am uninstalling the old driver properly.
    If you installed HP software from the printer's CD, PrintDoc provides instructions for removing it in this thread:
    http://h30434.www3.hp.com/t5/Mac-printing-and-scanning/Photosmart-C4795-quot-Dev ice-Not-Reachable-quot-When-Configuring/m-p/137425
    As an aside, the HP Photosmart C4700 Series is listed in Mac OS X v10.6: Printer and scanner software for both Print and Scan:
    http://support.apple.com/kb/ht3669
    As the item in that article includes an asterisk, you might run Software Update and see if anything from the vendor has been updated.
    Imac Mac OS X (10.4.11)
    Is your operating system listed correctly?

  • Photosmart C4795 installation error on Windows 7 64 bits

    Dear experts,
    I have been facing an annoying issue while installing HP Photosmart C4700 All-in-One Printer series Full Feature Software and Driver I recently donwloaded from HP website.
    During the installation process, the window suddenly closes when "applying updates". No error message is shown or anything that could tell us what went wrong, it just disappears from my screen.
    I've found the following post with the exact issue as mine but different product. I tried that solution but it did not work at all for me: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/hp-photosmart-plus-b209a-m-driver-inst...
    I hope someone can give me a tip because I am really out of options here.
    I appreciate any help.
    Thanks,
    Ricardo
    This question was solved.
    View Solution.

    Hello Ricardo,
    lease try following these steps and let me know the results:
    Launch the installation and follow the steps till the EULA (License Agreement) screen.
    Click the 2nd link - Internet Connection Usage Settings and select No, Thanks for both of the listed questions.
    Confirm the selection, accept the EULA and continue the installation which should no\w proceed further.
    Plese let me know if that helps,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Problem with HP Photosmart C4795 Printer

    I'm having difficulties with getting my C4795 to print.  The feed rollers are operating more than usual.  Whenever I turn the printer on it feeds the paper without any job being initiated.  When I try to start a print job oftentimes the printer will feed the paper either halfway or completely without printing at all.  The only one I've been print at all is to individually feed a single paper at the right moment when the feed rollers are operating.
    My HP software is up-to-date and I've no new Windows updates.  I've unstalled and reinstalled my HP printer software.  I've ran the HP diagnostic printer utility and it reported no problems.  I have this problem no matter whether I connect to the printer via USB cable or wireless.  
    Does anyone have suggestions or solutions for fixing to this problem?

    Here is a link with some troubleshooting steps that may help to solve the issue you are having with your printer:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02065582&cc=us&dlc=en&lc=en&product=3940574&tmp​...
    Paper feed problems are a hardware issue, if none of these steps help I would recommend contacting HP for upgrade options. I have included a link with directions for contacting HP:
    http://www8.hp.com/us/en/hp-information/summary/ww​-contact-us.html
    I am an HP employee.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

Maybe you are looking for