My hp photosmart D110 printer won't scan or print since I upgraded to Yosemite.  Any suggestions?

My hp photosmart D110 printer won't scan or print since I upgraded to Yosemite.  Any suggestions?

Hey clutterfromduluth,
Thanks for the question. I understand that you are experiencing issues with your printer/scanner after updating to OS X Yosemite. To troubleshoot this issue check out the following:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Follow these steps until the issue is addressed:
1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
5. Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
1. Reset the printing system, then add the printer again.
2. If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
3. Contact the printer vendor or visit their website for further assistance.
Thanks,
Matt M.

Similar Messages

  • What is a supply memory error 10.1000? How can I fix it? My printer won't scan nor print.

    My Laser Jet M1212nf MFP still copies, but everytime I try to print or scan a document it doesn't work and it shows a supply memory error on the display. I already tried to switchof and uplug the printer, but the problem still persits. Can anybody help me???
    This question was solved.
    View Solution.

    Just fixed this on yet another Laserjet 2600dn....
    Remove the affected cartridge. Look at where the chip on the cartridge hits the reader at the rear of the machine. There are two triangular 'wires' which hit the chip.
    They should both be raised proud of their mount. In all cases of this error which I have dealt with (I'm a reseller) one or both have been pushed into the mount and are failing to spring out when the cartridge is removed.
    This prevents the chip being read.
    The solution? Grab them and gently pull them proud again so that the inserted cartrdige makes firm contact with them.
    Problem solved! Hope this helps at some people experiencing this issue.

  • Hp 7525 Photosmart printer won't scan to my PC but will scan to other PCs on the LAN

    Hp 7525 Photosmart printer won't scan to my PC but will scan to other PCs on the LAN.  I tried to install the printer software but it says it is already installed.  Do I have a security setting wrong?
    Other PC names show up on the printer's touch screen but not mine.  We are all on the same wireless subnet with the printer at a fixed IP address.
    I can print from my PC and scan from my PC but I can't scan from the printer touchscreen to my PC.
    tcliff

    Hi,
    You may have to start from your computer first:
        Double click printer icon on desktop,
        Select Manage Scan to Computer
        Click Enable -
        Restart your printer to see, is your machine in the list ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • New pc running on Windows 8.1 and OfficejetPro L7480 but the printer won't scan.

    Have new pc running on Windows 8.1 and OfficejetPro L7480 but the printer won't scan. It will print via usb and I've downloaded the full drivers Full_win_WW_140_408 but won't install. I've also tried to install the original drivers but they were for windows XP. The printer is approx 7 years old but still works (or did!)

    Hello RevPhil,
    Welcome to the forums!
    I noticed your post about your printer not installing properly for you on your Windows 8.1.
    I would suggest trying to use the HP Print and Scan Doctor to install the printer.
    If that doesn't work, please let me know what exactly happens when you try to install, for example, do you see an error message or code? Does the installation stop?
    Have you tried installing both USB and wireless methods?
    Hope to hear back from you shorly!
    Enjoy your weekend,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • I just installed Mountain Lion on my MacBook Pro and enabled dictation. It won't let me edit Google Docs with it. Any suggestions?

    I just installed Mountain Lion on my MacBook Pro and enabled dictation. It won't let me edit Google Docs with it. Any suggestions?

    It would be easier to just fix whatever is making your machine slow.
    I wrote a little diagnostic program to help show what might be causing these problems. Download EtreCheck from http://www.etresoft.com/download/EtreCheck.zip, run it, and paste the results here.
    Disclaimer: Although EtreCheck is free, there are other links on my site that could give me some form of compensation, financial or otherwise.

  • My ipod nano4th gen will not download the purchased songs in itunes v11.  Just upgraded to mac 10.6.8-won't synch new songs since this upgrade.  The ipod is seen in the itunes as the devise, and the nano screens says synching when plugged into the macmini

    my ipod nano4th gen will not download the purchased songs in itunes v11.  Just upgraded to mac 10.6.8-won't synch new songs since this upgrade.  The ipod is seen in the itunes as the devise, and the nano screens says synching when plugged into the macmini usb port, but the itunes window does not say it is synching like it has before so whats the culprit? Techno virgin in distress! 
    PS - I added an iphone5 which is whay these upgrades happened so this synching to the ipod error is since the iphone began synching.

    I just learn in some post that the most common lapses in syncing is not checking if "sync music" in music section of the ipod is ticked. So double check if it is. Cheers!

  • HT4168 I have written a family history in Pages format that I would like to have printed in hard copy format to give to my family. Any suggestions as to to do that?

    I have written a family history in Pages format that I would like to have printed in hard copy format to give to my family. Any suggestions as to to do that?

    Try a google search on "self publish" to find things like
    http://www.lulu.com/publish/books/

  • So I've downloaded a tv series from iTunes onto my macbook pro, for some reason the episodes on my iTunes won't play at all. no sound and no images. any suggestions and help?

    so I've downloaded a tv series from iTunes onto my macbook pro, for some reason the episodes on my iTunes won't play at all. no sound and no images. any suggestions and help?

    Hi,
    As you have match, I suggest that you create a new library by holding ctrl whist launching iTunes. Select create new library. Sign into iTunes Store and activate match. You will now have access to your music and will be able to stream your music.
    Options : get a new external drive formatted for mac and either download music from match or copy music from old drive to new one. Alternatively you could reformat old drive and download music from match - I would not be comfortable using this option as it means erasing drive before being able to use with mac.
    Jim

  • HP Photosmart C4600 Printer won't scan

    Tried uninstalling & reinstalling printer and also installing updated driver suggested in Forum from someone having same problem & then restarting computer.  Running Mac OS X version 10.6.2.  Tried scanning from printer & also computer & get same message - "unknown error".

    Hi Joyful10,
    Welcome to the HP Forums! I see that your HP Photosmart c4600 printer will not scan, with your Mac OS X 10.6.2. I have a few questions for you:
    What is your printer's Product/Model Number? To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number.
    How is the printer connected? Wireless, Ethernet, or USB?
    Can you make copies with the printer?
    Is the printer's power cable plugged into a surge protector, or directly to the wall outlet?
    Hope to hear from you, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • [win7 64bit ultimate]: HP Officejet Pro 8600 Plus prints won't scan

    Guys I have spent 2 days on reading and trying all of the suggestions in previous posts. My HP Officejet Pro 8600 Plus JUST won't scan. When I click to scan a Document or Photo the HP Scan pops up saying: The HP Officejet Pro 8600 was not found.
    When I do unistall the HP basic software and then install again it works fine. However when pc restarts problem is still there.
    I have completely uninstalled my avast Antivirus and also configured the windows firewall. No luck till now.
    Tried the HP Print and Scan Doctor: It appears that the problem is in the device manager. Edited: Just looked at the device manager and spotted this >  
    If I reinstall it will work only till my next restart.
    Any suggestions?

    @N3CR4, welcome to the forums
    I read about how you cannot scan and have been troubleshooting quite a bit lately, to no avail.
    I have some questions and some ideas for you. If you've tried the steps, just let me know the results. Here are my ideas for you.
    Have you uninstalled the printer by right clicking on them in the Device Manager, as shown in your screen shot, then restarted your PC and reinstalled?
    Have you tried creating another User Account with Admin privileges and tried installing?
    Try a clean boot, and restart the PC and ensure your Firewalls and Anti-Virus scanners are disabled and try running the installation.
    Will the printer install successfully on another PC?
    Remove the printer by using the Microsoft Fix it tool, restart the PC and try installing again.
    Try unregistering and re-registering the Microsoft Windows Installer service:
    1. Click the Start menu and type " cmd " in the search field and press enter.
    2. Type in " msiexec /unregister " and then press enter.
    3. Type in " msiexec /regserver " and then press enter.
    4. Restart your PC and try the installation.
    Run the SFC scan to repair any corupt files. (Run the scan 3 times if there is an issue in the results) then try installing the printer again.
    Using System File Checker to Restore System Files
    I really hope the steps help, let me know the outcome
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Hp 4610 printer won't scan

    Hello, have just installed Asus PC with windows 8 and can print and fax but won't scan, any suggestions please?
    This question was solved.
    View Solution.

    Hello banch64, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are experiencing issues scanning.  I would like to help.
    I would recommend downloading and running the HP Print and Scan Doctor.  Once it has been launched, select the fix scanning option.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Officejet 6500 wireless printer won't scan in Windows 8.1

    My 6500 won't scan.
    I read in my Windows 8.1 for dummies that it may be too old.
    I purchased it in the summer of 2010.
    After I plugged my printer into my new Windows 8.1,  I performed a 'test' through a wizard that claimed 'scan successful' but I have no icin on my desktop (like I did when my printer was hooked up to my old XP computer), and so have no way to access the scanner comtrols.
    Any suggestions?

    Hi eliann77,
    I would recommend that you make sure all of your Windows Updates have been done first. If there is still no change after that, please try installing the printer via the in operating system driver, and see if you're able to scan that way with the Windows software. If that works I would recommend sticking with that method, because I believe your Dummies book may be right that this printer is too old for Windows 8.1.
    I hope this information has been helpful and I hope you have a great weekend
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • All in one printer won't scan

    I just bought my mac and I got an HP photosmart c2480 all in one printer and when I try to scan pictures, it reads "usb not connected" does anyone have any idea what I may need to do. The computer recognizes the printer I am able to print from Word, just can't scan.

    Don't know if you got the answer for this yet or not, but if you've upgraded to Leopard, you need to go to the HP website and install some drivers. Here's the link:
    http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=219&lc=en&cc=us&dlc=en&produc t=3192753&lang=en

  • Hp photosmart d110/DELL INSPIRON 1440 /WINDOWS 7/PRINTS BLANK PAGES/ COPIES BLANK PAGES, i

    PRINTER: HP PHOTOSMART D110 series: Computer: DELL INSPIRON 1440 / WINDOWS 7;
    The printer is online:  pages I try to print come out BLANK;  Ditto  pages I try to copy.
    When attempting to fix problem with HP  support site, I received this error message: 
    lINE: 2
    Char: 21732
    Error: Invalidcharactererror
    code: 0
    URL; WWW.8-HP COM/WW/EN/SCRIPTS/MOOTOOLS JS
    KARAMEHA

    Hi Gillesti,
    I understand you're having an issue with your Photosmart D110 printer not printing properly. I'm sorry to hear this has been happening to you but will certainly do my best to assist you.
    The first thing I would recommend doing is checking the ink levels on your printer. If anything is low or close to low I would recommend changing it.
    If the problem persists after changing the ink or you ink levels are all full (or at least not close to empty) you may need to try some more in depth steps and that involve cleaning and checking print settings.
    Hope this helps, have a great day!!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • HP Officejet 4620 Won't Scan on Printer Itself

    My computer runs on Windows 8, and updated itself last night. Somehow my printer was disconnected from the computer, so I couldn't do anything. I reinstalled the printer, but now I cannot scan using the "scan" button on the printer itself; I now have to scan from the desktop using the printer assistant icon. How can I make it so I'm able to scan directly from the printer to the computer?

    Hello @BrendaBrown , and welcome to the HP Forums!
    I see you're experiencing scanning problems.  I would like to help!
    I would recommend performing a power reset on the printer.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also recommend downloading and running the scan portion of the HP Print and Scan Doctor.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

Maybe you are looking for

  • Getting parameters from a frame (JSP)

    Hi all, I am trying to retrieve the url in the adress bar, from within a frame. Lets say I have three JSP files, FRAME.JSP includes TOP.JSP and MAIN.JSP. if I call the method request.getParameter('toto'); from within MAIN.JSP I am only looking in the

  • Passing an array to a method taking an Object?

    Hi, I need to pass an array of randomly generated numbers to a method that takes an Object. I can't seem to figure out how to do this... Here is my code for creating the array of random numbers: Random generator = new Random(); for (int i = 0; i < si

  • 8.1.7 installation issue

    I'm running Oracle 8.1.7 on Solaris 2.8 2/02 release on x86 platform. My problem is that when it got to the point of creating the database from the CD I got the infamouse ORA-01034 error. So I went to the command Line and peformed the following: SVRM

  • Can ZAM capture local Administrators from client?

    Hi, my first time posting here. My organization uses Zenworks 11 SP1 (ZCM and ZAM). Can ZAM be configured to capture members of the local administrators group off of the client? Our client machines are Windows XP SP3, and local administrators can be

  • Removing user-defined keywords?

    Hi experts... I'm not really happy with the out-of-the-box keywords that are in Aperture, so I went into the Keywords HUD and added some of my own (camera type, etc).  Now, I find that I want to remove one of those user-defined keywords from multiple