My HP printer all of a suden stop printing.
Yesterday the printer worked fine. today without my permission it sends all my print requests to either one note or to Hp print but that line says error not on line. Ihave checked all the cords they look fine. I turned off the printer and re-set it by turning it back on. Still it doesnot work.
What happened and how can I fix it?
Brenda Underwood.
Hello Brenda,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand your printer is not functioning correctly for you and seems to be "offline". I would need some more information to research the correct guides for troubleshooting. Please respond with some more information.
Please respond with which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Please respond with your printers Model Number:
How Do I Find My Model Number?
How is your printer connected? Wireless, USB or Wired (Ethernet)?
Thank you,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!
Similar Messages
-
Deskjet F2235 All-In-One has stopped working
Hi,
My all-in-one has stopped working. I purchased it new at Christmas 2008 and have only printed 2 test pages, but now when I turn it on all the lights on the front panel light-up & my PC says the printer is off-line. I cannot even get it to turn off by the on/off switch... I have to pull the mains plug from the back.
- I have un-installed & re-installed the software twice without improvement.
- I have replaced the USB cable without improvement.
My PC is a 2.4GHz Celeron 2 with 512 Mb RAM, XP Home SP3, 80Gb hard drive with 7Gb free.
Any ideas ?
Thanks in advance.seems like a hardware issue. can you please follow THIS document and see which lights are blinking, and do the corresponding troubleshooting and see what happens?
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee. -
All ZCM Policies Have Stopped Applying
Hey Guys,
We're having some serious problems over here.
Issue:
All ZCM policies have stopped applying.
This includes group policy settings, ZENworks Explorer Configuration Policies, and iPrint Printer Policies.
We've got a single primary server, 1300+ devices, and are currently using the built-in sybase database.
The first thing on our plate is to address the database. We're migrating to Oracle very soon, since we have out-grown the 1000-device limit of the built-in database, however do you feel that the limitations of the built-in database could be causing the policy issues? This all started perhaps a few weeks ago, and before that point everything was just fine.
Server OS:
SLES 11, 64-bit
ZCM Version 10.3.0.0
Clients are Windows 7 32-bit and 64-bit
pitcherjShaun,
I've not changed the way they're associated.
The iPrint policies are (and have been) associated to folders full of workstations.
The group policy setting(s) are (and have been) associated at the root of "Workstations" since it's a campus-wide policy.
Prior to our email discussion, I did create a test policy which was pointed at a different iPrint server with no success.
I also cycled enable/disable enforcement of the policy, incremented the version several times, performed a zac cc and a zac ref on the client, as well as attempted to associate the policy to a user which I logged into the workstation with no success. -
We have a problem with one of our deployments of Windows Server 2012 Hyper-V with a 2 node cluster connected to a iSCSI SAN.
Our setup:
Hosts - Both run Windows Server 2012 Standard and are clustered.
HP ProLiant G7, 24 GB RAM, 2 teamed NIC dedicated to Virtual Machines and Management, 2 teamed NIC dedicated to iSCSI storage. - This is the primary host and normaly all VMs run on this host.
HP ProLiant G5, 20 GB RAM, 1 NIC dedicated to Virtual Machines and Management, 2 teamed NIC dedicated to iSCSI storage. - This is the secondary host that and is intended to be used in case of failure of the primary host.
We have no antivirus on the hosts and the scheduled ShadowCopy (previous version of files) is switched of.
iSCSI SAN:
QNAP NAS TS-869 Pro, 8 INTEL SSDSA2CW160G3 160 GB i a RAID 5 with a Host Spare. 2 Teamed NIC.
Switch:
DLINK DGS-1210-16 - Both the network cards of the Hosts that are dedicated to the Storage and the Storage itself are connected to the same switch and nothing else is connected to this switch.
Virtual Machines:
3 Windows Server 2012 Standard - 1 DC, 1 FileServer, 1 Application Server.
1 Windows Server 2008 Standard Exchange Server.
All VMs are using dynamic disks (as recommended by Microsoft).
Updates
We have applied the most resent updates to the Hosts, WMs and iSCSI SAN about 3 weeks ago with no change in our problem and we continually update the setup.
Normal operation
Normally this setup works just fine and we see no real difference in speed in startup, file copy and processing speed in LoB applications of this setup compared to a single host with 2 10000 RPM Disks. Normal network speed is 10-200 Mbit, but occasionally
we see speeds up to 400 Mbit/s of combined read/write for instance during file repair
Our Problem
Our problem is that for some reason all of the VMs stops responding or responds very slowly and you can for instance not send CTRL-ALT-DEL to a VM in the Hyper-V console, or for instance start task manager when already logged in.
Symptoms (i.e. this happens, or does not happen, at the same time)
I we look at resource monitor on the host then we see that there is often an extensive read from a VHDX of one of the VMs (40-60 Mbyte/s) and a combined write speed to many files in \HarddiskVolume5\System Volume Information\{<someguid and no file extension>}.
See iamge below.
The combined network speed to the iSCSI SAN is about 500-600 Mbit/s.
When this happens it is usually during and after a VSS ShadowCopy backup, but has also happens during hours where no backup should be running (i.e. during daytime when the backup has finished hours ago according to the log files). There is however
not that extensive writes to the backup file that is created on an external hard drive and this does not seem to happen during all backups (we have manually checked a few times, but it is hard to say since this error does not seem leave any traces in event
viewer).
We cannot find any indication that the VMs themself detect any problem and we see no increase of errors (for example storage related errors) in the eventlog inside the VMs.
The QNAP uses about 50% processing Power on all cores.
We see no dropped packets on the switch.
(I have split the image to save horizontal space).
Unable to recreate the problem / find definitive trigger
We have not succeeded in recreating the problem manually by, for instance, running chkdsk or defrag in VM and Hosts, copy and remove large files to VMs, running CPU and Disk intensive operations inside a VM (for instance scan and repair a database file).
Questions
Why does all VMs stop responding and why is there such intensive Read/Writes to the iSCSI SAN?
Could it be anything in our setup that cannot handle all the read/write requests? For instance the iSCSI SAN, the hosts, etc?
What can we do about this? Should we use MultiPath IO instead of NIC teaming to the SAN, limit bandwith to the SAN, etc?Hi,
> All VMs are using dynamic disks (as recommended by Microsoft).
If this is a testing environment, it’s okay, but if this a production environment, it’s not recommended. Fixed VHDs are recommended for production instead of dynamically expanding or differencing VHDs.
Hyper-V: Dynamic virtual hard disks are not recommended for virtual machines that run server workloads in a production environment
http://technet.microsoft.com/en-us/library/ee941151(v=WS.10).aspx
> This is the primary host and normaly all VMs run on this host.
According to your posting, we know that you have Cluster Shared Volumes in the Hyper-V cluster, but why not distribute your VMs into two Hyper-V hosts.
Use Cluster Shared Volumes in a Windows Server 2012 Failover Cluster
http://technet.microsoft.com/en-us/library/jj612868.aspx
> 2 teamed NIC dedicated to iSCSI storage.
Use Microsoft MultiPath IO (MPIO) to manage multiple paths to iSCSI storage. Microsoft does not support teaming on network adapters that are used to connect to iSCSI-based storage devices. (At least it’s not supported until Windows Server 2008 R2. Although
Windows Server 2012 has built-in network teaming feature, I don’t article which declare that Windows Server 2012 network teaming support iSCSI connection)
Understanding Requirements for Failover Clusters
http://technet.microsoft.com/en-us/library/cc771404.aspx
> I have seen using MPIO suggests using different subnets, is this a requirement for using MPIO
> or is this just a way to make sure that you do not run out of IP adressess?
What I found is: if it is possible, isolate the iSCSI and data networks that reside on the same switch infrastructure through the use of VLANs and separate subnets. Redundant network paths from the server to the storage system via MPIO will maximize availability
and performance. Of course you can set these two NICs in separate subnets, but I don’t think it is necessary.
> Why should it be better to not have dedicated wireing for iSCSI and Management?
It is recommended that the iSCSI SAN network be separated (logically or physically) from the data network workloads. This ‘best practice’ network configuration optimizes performance and reliability.
Check that and modify cluster configuration, monitor it and give us feedback for further troubleshooting.
For more information please refer to following MS articles:
Volume Shadow Copy Service
http://technet.microsoft.com/en-us/library/ee923636(WS.10).aspx
Support for Multipath I/O (MPIO)
http://technet.microsoft.com/en-us/library/cc770294.aspx
Deployments and Tests in an iSCSI SAN
http://technet.microsoft.com/en-US/library/bb649502(v=SQL.90).aspx
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support -
After upgrade my MBP from snow leopard to mountain lion all my smb connections stop to work.
After upgrade my MBP from snow leopard to mountain lion all my smb connections stop to work.
Now iám using mac os 10.8.2
I can see the server, I can choose the drive, but when try to open a folder the message on Finder is: You don't have permissions to see the content.
I already delete the key and try to connect again, but the problem persist. Already try change the ip from file server. Already try differents users. (admin, guest, etc...)
I have a windows server 2008 and a NAS working with SMB protocol. Both with the same problem.
That problem occurs only on Finder, if I try see the folder by Terminal, is possible to see my files.
Any Solution ?
Any Tip ?
Any Question ?Not knowing how much RAM is installed in your iMac, your iMac can take a total of 8 GBs of RAM.
Before upgrading to Mountain Lion, I would strongly suggest installing the maximum 8 GBs of RAM.
Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
Here is OWC's link to your model iMac and the RAM modules you will need.macsales
http://eshop.macsales.com/item/Other%20World%20Computing/8566DDR3S8GP/
You can purchase and download OS X 10.8 Mountain Lion from the Mac App Store in the OS X dock.
Before installing, it would be prudent to make a backup copy of all of your important data or your entire current system. Either using, optical discs, USB flash drives or external hard drives.
This is too insure protection of your data in case something goes wrong with the install of OS X Mountain Lion.
Good Luck! -
I have an optical mouse that came with my Mac Pro, the only thing plugged into the USB port on the keyboard. After a year of working normally, the trackball all of a sudden stopped scrolling down. It scrolls up just fine, but not down. Any thoughts?
Well
I tried all of the suggestions, sort of. I did not have alcohol wipes, but I did take alcohol and pour some ona white paper towel and then rolled the mouse touch ball aroound and that finally cleared up the problem. Just inverting it on paper did not do the reick, it needed some help with the alcohol. Of course the probelm is the debris that gets inside and it really needs to come out.
This is a huge problem for RIM devices users too. -
On my itouch 4th gen, I use imessage and message many people, but sometimes when i send a message the send bar on top will go almost all the way and stop. This will happen for some time and then work later. is there anything to avoid the freezing problem while it sends
See:
iOS: Troubleshooting Messages
However, I suspect it is just a tempery network problem beyond your control -
My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!
try this.
get back into your router's settings and start deleting devices that are not connected to your router.
you can also delete the ones that are connected - they'll connect again.
on the DHCP side of it, increase the amount of users that can connect/log in to your router.
see if that sorts it out for you.
good luck. -
My imovie all of a sudden stopped working when I was in the middle of making a project and then all of a sudden when I tried to click on something my computer just beeped at me. I cant even exit out of the program! Or shut down my computer unless I quit imovie. Help?!?!
What version of OS X and iMovie are you using?
-
HT201401 Hi my 4s has all of a sudden stopped playing sound.
Hi my 4s has all of a sudden stopped playing sound. I have a ringtone but no sound for music/movies etc. tried turning on and of and letting bat go flat then recharging. Sound came back for a while then went again. I noticed this started soon after I upgraded to 5.1.1 . Ive also looked at the error reports the phone generates for apple and there are a few memory low notes. Any help would be appreciated.
We have a WHOLE discussion about the issue over here:
Re: IOS 5.1.1. update bug (Volume Control)
So far Apple is not doing anything to fix the bug with 5.1.1 It's really annoying! -
i have recently formated my ipod classic 160gb to nfts and now it only shows in divices an printers, and whenever i connect it to my pc all my apple software stop responding
The Apple launch issues article suggests pulling 3rd-party plug-ins if the problem doesn't happen in Safe Mode.
Here's the article that will walk you through the process -> iTunes: Troubleshooting issues with third-party iTunes plug-ins -
How do I play All my videos non stop?
if anybody can tell me how do i play all my videos non stop, and also how do I separet my music videos from the movies, i got and answer of how put your own dvds movies into you Ipot ;o)
"also how do I separet my music videos from the movies"
Right click on them, select "get info" then "video", then select a category from the "video kind" box.
Click ok. Sync your iPod to reflect the changes. -
My camera all of the sudden stopped working. What is going on?
My camera all of the sudden stopped working. What is going on?
if by camera you are referring to iSight, here is how to troubleshoot:
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
Standalone iSight cameras
The instructions in this section apply if you have an iSight camera that is not built into your computer but attaches to the computer via a FireWire cable.
Make sure the cable is completely plugged in.
Incomplete cable connections are the most common cause of hardware problems. Follow these quick instructions to make sure your iSight cable is completely plugged in.If your iSight camera continues to function improperly, continue on to the steps below.
Turn the computer and the camera off.
Unplug the FireWire cable from your computer and the camera.
Wait a few seconds.
Firmly, without forcing, plug the cable back in to the camera and the computer.
Caution: FireWire ports are keyed so the FireWire cable can only be inserted one way. Make sure you are inserting the FireWire cable into the FireWire port in the correct orientation.
Restart your computer.
If the green light on top of the iSight is not lit, turn on the camera by gently twisting the lens.
Launch iChat AV.
See if a different FireWire port works.
Some Macs have more than one FireWire port. If your computer has another FireWire port, disconnect the iSight camera from the current port and plug it into the other one. Restart your computer and test the camera before continuing to step three.
Check to see if other FireWire devices work.
If you have another FireWire device, such as a video camera or an external hard drive, try plugging it into your computer to see if it works. If your other FireWire devices work, this means that your computer's FireWire port is working correctly. If your other FireWire devices don't work, there may be an issue with your computer. Contact an Apple Authorized Service Provider for assistance.
Determine if there is an incompatibility with another FireWire device.
If more than one FireWire device is connected to your computer, there may be an incompatibility between two of the devices. To rule this out, disconnect all other FireWire devices from the computer, including external hard drives, CD/DVD drives, other cameras, and FireWire-based networking equipment, such as hubs and repeaters. If your iSight camera works normally when you remove other FireWire devices, plug them back in one at a time to isolate the cause of the issue.
Make sure the FireWire cable is good.
Follow these steps to test the FireWire cable:Information about your iSight camera should appear in the FireWire Information field. If you see the iSight camera in this field, your cable is good. Once you've confirmed the cable you are using is good, use it to plug your iSight into your computer. If the green light on the top of the camera does not light up immediately (within a second), there may be an issue with your camera. Fill out an iSight Service Request to have your camera repaired.
Important: Do not send your iSight camera for repair until you have tried each troubleshooting step.If the FireWire cable that came with your iSight camera didn't work, try another FireWire cable that you know works. If this cable works, there is an issue with your iSight's FireWire cable. If your camera is in the limited warranty period, fill out an iSight Service Request to receive a replacement cable.
Choose About This Mac from the Apple menu.
Click More Info. System Profiler opens.
In the System Profiler window, click on the Devices and Volumes option.
Click the disclosure triangle, if necessary, in the FireWire Information area.
Check to see if there is an issue with your camera.
If information about your iSight appears in System Profiler but the camera still does not work, follow these steps:Video from your iSight camera should appear on screen. If the screen is blue or black, there may be an issue with the camera. Fill out an iSight Service Request to have your camera repaired.
Open iChat AV.
Choose Preferences from the iChat menu.
Click the Video button.
Twist the front of the iSight camera lens to open the iris barrier. The green light on the camera turns on when the iris barrier is open. -
i have an ipod touch 4th gen and it has all of a sudden stopped playing music. i click on the song and it goes onto it then all of a sudden goes onto the song then goes to the music menu without playing the song. please help
- Reset the iPod. Nothing will be lost:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup
- Restore the iPod to factory defaults/new iPod. -
I usually have iCloud backup but I got a notification that my phone has not backed up for the last two weeks, and It wont let me do it manually.There is also still enough storage space. Why did it all of a sudden stop backing up?
The HT1766 article you attached lists the prerequisites for an iCloud backup:
iCloud automatically backs up the most important data on your device using iOS 5 or later. After you have enabled Backup on your iPhone, iPad, or iPod touch in Settings > iCloud > Backup & Storage, it will run on a daily basis as long as your device is:
Connected to the Internet over Wi-Fi
Connected to a power source
Screen locked
You can also back up manually whenever your device is connected to the Internet over Wi-Fi by choosing Back Up Now from Settings > iCloud > Storage & Backup.
Maybe you are looking for
-
Opening Premiere Elements 10 files from PC on a Mac
I am using Premiere elements 10 files from PC on Mac OS Mtn Lion saved as .prel and get message "this project is not compatible with current version of Premiere Elements". Please help. thank you.
-
Duplication of music and bookmarks
I installed iCloud. After setting up my computer, iPhone and iPad I noticed that I had many duplications of my favorites and music. I don't know what the cause and solutions are?
-
I currently use Chrome as my web browser and am not able to access the Ancestry.com website using it. Every attempt to sync my records fails and the manual suggests use of Internet Explorer or Firefox 3.6 However, the current download available is no
-
We unable to connect to livecache database
Hi All, We have restored SCM along with Live cache successfully. After restore we are unable to connect live cache to R3.... our source system versions are NW 2004s R2 and live cache version is 7.6.04.09 We didn't find the same version software in th
-
Single Edition Licence with CC
I plan to subscribe to a single app licence for Creative Cloud (for InDesign CS6). Will I still be able to publish single edition apps through DPS with this Creative Cloud model, or do I have to have the full membership (all apps)? Thanks