My HP PSC 1315 Cartridge Error Does Not Respond To Troubleshooting

My printer HP PSC 1315 has never given me problems. About a month ago I replaced the black ink cartridge (it was all I could afford). It was working fine and then out of the blue it came up with an error saying to check my cartridges. I did. Nothing obvious, so I ran the trouble shooter.... NO HELP! I REALLY need my printer in working condition ASAP!
I tried removing the cartridge and put it back in. Then, did a reset by turning the printer off by pressing the "On/Resume" button Then I removed the power cable and plugged it back in. I turned the printer back on using the "On/Resume" button that was used to turn it off.
DIDN'T HELP!

I've completed ALL of the following:
HP SOLUTIONS
I've even reset it and tried removing the black cartridge. I CANNOT afford a new one.... PLEASE HELP!!!!

Similar Messages

My Ipad backup error does not respond to "cancel" and it won't go beyond the error message.

My Ipad is frozen and won't start because the backup to the i-cloud has not succeeded in 5 weeks. I was traveling and didn't have wireless access. Now I have access but it doesn't respond to the "cancel" and it won't go beyond the error message. I am in a new location so a new WiFi information needs to be entered in order for the iCloud to work. Need to know how to bypass the message and log-on.
The exact message is:
iCloud Backup
This iPad hasn't been backed up in 5 weeks. Backups happen when this iPad is plugged in, locked, and connected to WiFi. "OK"

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

ITunes installation error: does not have program associated with it for performing this action

Repeated tries to install iTunes continues to fail. Installing on Acer laptop using Windows 7.
Error: does not have program associated with it for performing this action
We have done the following: open Default programs, clicked associate a file type, clicked on change program button and selected a program to open with and clicked OK/enter.
The installation continues. we get to the finish window; click finish.
Next error: iTunes has been installed incorrectly.
So, what do we do to get iTunes working?
Thank you.

Hi normeagle,
Welcome to Apple Support Communities.
You may find this article helpful for troubleshooting your iTunes installation:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Best,
Jeremy

My suddenly no longer works and dosn't show any sign and when i try to make restore for it iTunes shows me error 4005 and my iPhone does not respond to iTunes

my suddenly no longer works and dosn't show any sign and when i try to make restore for it, iTunes shows me error 4005 and my iPhone does not respond to iTunes

OK, and when you searched for information on iPhone error 4005 what did you find?

HT201412 My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

While doing migo gertting error does not support serial management

while doing migo 101mvt type getting error does not suppoert serial no management .
Moderator: Please, avoid asking basic one-sentence questions. Your other threads were locked for the same reason

Hi,
Can you please check SAP Note 1262966 - MIGO and MIRO: Missing entries in T169P. This might be of some help to you. It states that
You use transaction SM31 to delete an entry in the views V_169P_A, V_169P_B, V_169P_DC, V_169P_IRTAX, V_169P_K, V_169P_LOGO, V_169P_MB, V_169P_PA, V_169P_PR, V_169P_S, V_169P_SA or V_169P_SV. The entry from the table T169P is deleted when you delete the entry from one of the views.
Different follow-on errors can occur in the transactions for inventory management or the Logistics Invoice Verification.
Error M7 001 "Check table 169P: entry & & & does not exist" occurs in the transactions for inventory management. The system does not propose any data for order-related items in the transactions for the Logistics Invoice Verification.
The entry in the table T169P is required for each company code for the function from Note 980420.
Thnx,
SG.

On certain sites, some lines have the lower half missing. Changing the font or its size does not help. The error does not appear with Iceape or Chromium.

On some sites certain lines appear with the bottom half missing, as if obliterated. Changing the font or its size does not help. The error does not appear with Iceape or Chromium.

I looks that the whole line doesn't fit in the container, so the bottom part is cut off. The usual cause is that a font is used that takes more vertical space, so any increase or changes from the font in what the website prescribes can cause this issue. I've seen web pages that were even affected by changing the minimum font size from none to 1 (!). If you do not have the font installed that the website specifies then Firefox will fallback to another (default) font that may have different dimensions.

ITunes does not respond when I try to play a movie

I just installed the latest iTunes update onto my Windows 64-bit computer and now, whenever I try to watch a movie on iTunes it freezes and does not respond. I have to start the task manager and end the program manually. I have unistalled iTunes and reinstalled it but I still face the problem of iTunes freezing and not responding. I have a pretty good collection of movies and would love to watch them cause well I paid for them but i cant because it keeps FREEZING. Also, it wont let me view trailers on the iTunes store so I'm thinking something is wrong with the 'video' part of my iTunes. Please help.

Although it's not such a good bet with a freeze as with the "iTunes has stopped working" messages, it would do no harm to try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

DAQCard-AI-16XE-50 Device does not respond to 1st IRQ level in Windows XP

DAQCards AI-16XE-50 and 6024E give the error "Device not responding to first IRQ level. Do you want to continue?" under TestPanel in Max 2.2, NI-DAQ 6.9.3, on a Dell GX620 with a Ricoh RL/5C476 PCMCIA to PCI adapter. If I click yes, I see input on the graph, as if the card is working. The DAQCards work fine with the same adapter under XP on a no-name machine. The DAQCards get assigned the IRQ 19, which is the same as the IRQ which gets assigned to the CardBus Controller. There does not seem to be a way to change the IRQ assignments.

Please view the KB:
http://digital.ni.com/public.nsf/websearch/066CAE594C0B44E886256A530058F06A?OpenDocument
Certain cardbus controllers no longer support ISA based interrupts. The only Dell that we know currently does not work is the Infinium, which uses a generic Microsoft Cardbus Controller. Do you know what Controller is used in the Dell you have?

My Adobe acrobat X Pro does not respond after a minute I open up a pdf file

I recently have installed Adobe Master Suite CS6 Collection. My Adobe acrobat X Pro does not respond after a minute I open up a pdf file. This happens every time when open a new pdf file. My operating system is Windows 7 pro ( Lenovo-64 bits). Any suggestions would be appreciated !!

Mylenium
Thank you for the suggestions.
I checked the WIndows log files. It reported the following error:
The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 4770
Start Time: 01d0079a09bba381
Termination Time: 13
Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
Thank you.

WLS 10.3 Does not respond to GET requests (HTTP/1.0)

Hi All,
I have 2 WLS servers running on separate physical hosts behind a cisco CSS load balancer. The keep-alive method the Cisco CSS uses is HTTP GET messages. This keep-alive method does not appear to work, because my WLS servers are not responding to the GET requests with HTTP 200 OKs (as would be expected). These GET messaged appear in the access logs, as follows, but from traces taken on the host, there are no HTTP 200 messages ever transmitted. I see no exceptions or errors related to this in the server or access logs.
WLS access log:
192.168.1.1 - - [14/Dec/2011:18:23:35 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
192.168.1.1 - - [14/Dec/2011:18:23:45 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
192.168.1.1 - - [14/Dec/2011:18:23:55 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
Interestingly, If i use a http-ping tool to send HEAD messages, the server correctly responds with the 200. A major difference between the CSS and the ping-tool, is that the CSS is using HTTP/1.0 where the ping tool uses HTTP/1.1. The GET requests are formatted a bit differently too. Below is how the different GET messages are formatted. Is it possible that WLS 11g does not support HTTP/1.0? Is there any method of debugging that I can employ to troubleshoot this further? As mentioned I do not see any errors or exceptions in the server logs or access logs....
Many thanks, in advance.
HTTP-PING TOOL HEAD MESSAGE - weblogic responds to this message
HEAD /APPDIR/index.jsp HTTP/1.1
Host: myhost.domain.com:7005
Accept: */*
LOAD BALANCER HEAD MESSAGE -weblogic does not respond to this message
HEAD /APPDIR/index.jsp HTTP/1.0
Connection: Keep-Alive
User-Agent: Mozilla/4.06 [en] (WinNT; I)
Accept: image/gif, image/x-bitmap, image/jpeg, image/pjpeg, image/png, */*
Accept-Language: en
Accept-Charset: iso-8859-1,*,utf-8
Host: 192.168.1.66

Other than failing the base address test, does the device seem to work in the test panels? One quick test would be to open the digital I/O panel, change some of the lines to output, toggle the logic levels, and see if the line states track the logic levels. Also, you can switch to the Counter I/O panel, change the mode to simple event counting, set the event source to the internal 100KHz clock, and start the counter. If the counter is working properly, you should see the counter value increase at a rate of 100000/second.
If the test panels seem to work OK, you may still be able to use the board, despite the resource test failing. I still can't explain why the test fails, though.
Joe

Perl Flip 8230 & XP 64-bit - Desktop manager does not respond

Greetings.
I am using a brand new Perl Flip 8230 (black), along with the new software (the CD has a timestamp of 2008.12.18, well after the last update of 2008.11.17).
When I install the software, it claims to be the 4.7 version, but I am having quite a few issues with it. First of all, while all the drivers install nicely, and the phone is recognized by the connection software, I am unable to *properly* launch the Desktop Manager.
An inital launch (click on icon) of the Desktop Manager causes it to appear in the Task Manager, but it never ends up showing up on the screen. I even tried waiting for 1/2 hr, no dice. A second attempt at launching (without shutting down the process first) does cause it to appear, but it ends up completely unresponsive. There is still only one executable in the Task Manager (the second attempt did not launch a second copy), but what exists on the screen does not respond to any actions.
The window that appears is almost completely blank - the dark grey background-image is visible, but pretty well no other text or icons of any kind exist aside from a large "Menu" at the upper left, which is also nonresponsive. As well, trying to close the window by using the red X at the upper right is completely unsuccessful. In order to close the program, I need to go to the task manager, find the process, and "End Process Tree". Nothing else works.
Finally, the window that does appear also has a version number at the bottom in tiny text - version 4.5 of the desktop manager. HUH?!
I tried to install a downloaded version of 4.7 (in case there was a mix-up at the factory), but it claimed that a newer copy of the software was installed. Somehow "4.7" is older than "4.5". Strange, that. Selecting the "desktopmgr.exe" file to run in compatibility mode as plain old "XP" also does not work.
I tried to repair the installation, no dice. I have now uninstalled the software in preparation of using the 4.7 version straight from the Blackberry website. I will report back on how well that works.
As a final note, I am running Windows XP 64-bit, with the latest service pack (SP2) and all the latest patches and updates (SP3 does not exist for XP 64-bit). I cannot install the software on a 32-bit version of XP because I do not have XP 32-bit on any of my computers. Nor do I have Vista (either 32-bit or 64-bit). I have Linux (5 computers), OpenBSD (3 computers), OpenSolaris (1 computer), Windows 2003 64-bit (2 servers), Windows 2008 64-bit (1 test machine) and several other experimental platforms (HaikuOS, BeOS, etc.), but no XP 32-bit. Sorry.
My other half's computer is an older 1Ghz PowerPC4 iMac (2nd gen iMac - "lampshade" model) running 10.4 (most recent update), but that computer is not one I want to use. I am also unsure if the Blackberry software is capable of running on PowerPC Macs, as it may be Intel-only (I haven't had a chance to check yet).
If someone has any idea why my Desktop Manager is completely unresponsive, please help.
And yes, I did reboot after installation. I seriously doubt that this is an ID-ten-T error. PEBKAC does not apply!!

An installation of the downloaded 4.7 software did not function; all symptoms were idential to the version supplied on CD.
I am shutting this thread down in favour of a post in a more appropriate category. Please provide any replies in that thread.

" device does not respond to is base address, do you want to continue ?" OR " Le périphérique ne répond pas à l'adresse de base"

Environment :
NI-DAQ 6.9.3
PCI-6025 E Card
LabPC1200 Card
PCI serial interface card
AGP video Card
Measurement & Automation explorer 2.0
After using the PCI-6025 E during an hour with the Measurement & Automation explorer 2.0 software, the message :�Le périphérique ne repond pas à l�adresse de base, voulez vous continuer?� or « the device does not respond to is base address, do you want to continue ? »
All the informations , even in the System Configuration Panel, seem to be in order. It seems that the problem occurs after I have tried to use also the Lab PC 1200 by the way of the Measurement & Automation explorer 2.0.
I have tried to:
� restart the software,
� stop the PC and restart it after a while,
� uninstall NI-DAQ 6.9.3 and all NI softwares
� Install NI-DAQ 7
The same problem was always here.
� stop the PC remove all the Cards except the video card
� restart the PC
� stop the PC and put only the PCI-6025E Card
The same problem was always here.
� uninstall NI-DAQ 7 and all the NI softwares
� stop the PC and remove the PCI-6025E Card
� Install NI-DAQ 6.9.3
� Stop the PC and install the PCI-6025E Card in another PCI Slot.
The same problem was always here.
I have each time try to change the number of the card by the use of Measurement and automation explorer 2.0 but with no success.
How can I do to use again this card?
I really thank you for any response.
NICOLAS Gabriel.

Hey Nicolas,
Try opening up the Reset Device.vi inside of LabVIEW and execute the VI. All you have to do is set the correct device number and check that the error returned is 0 and not another error number. In many cases a crashed program can cause the devices to enter into an unsafe state that they need to be reset from.
It is possible that you damaged the device and that it will need to be sent in for repair, but in most cases a reset will fix the issue. Also, try opening up MAX and right-click on Traditional NI-DAQ Devices under Devices and Interfaces and click on reset Traditional NI-DAQ. If that doesn't work try the Device reset under DAQmx as well.
I hope this helps out.
Joshua P.
National Instruments

What do I do if wen I go to download an app it comes up with three security questions .wen I press on the third question it does not respond just turned blue n stays blue n won't let me go any further therefor not lettin me download any apps

What do I do if wen I go to download an app it comes up with three security questions .wen I press on the third question it does not respond just turned blue n stays blue n won't let me go any further therefor not lettin me download any apps. Thanks

I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan.

Photosmart C6180 on wireless network does not respond when attempting to print

Photosmart C6180 successfully installed on wireless network does not respond when attempting to print. All in one is successfully installed on wireless network and SW successfully installed on Windows XP computer yet printer does not print. Get no error message other than document failed to print. HELP!

So gald I'm not the only one. I have been fighting this crappy HP printer for MONTHS also. Everything says a OK goody goody but printer fails to print every two to three weeks.

My HP PSC 1315 Cartridge Error Does Not Respond To Troubleshooting

Similar Messages

Maybe you are looking for