My HP series 3310 won't print wirelessly after upgrading from windows XP to windows 7 32

My HP Photosmart won't print wirelessly since I upgraded from Widows XP to Windows 7 32

Yup, here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76971-1&cc=us&dlc=en&lc=en&...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Printer won't re-install after upgrading from 8.1 to Windows 10

The printer worked fine using Windows 8.1 on my netbook PC (no CD-ROM player).When I upgraded to Windows 10 the printer dialog box said I had to install the printer (again!)I use the printer wirelessly and the installer found the printer on my network. However, it was unable to install it after I had selected it. I tried again, as suggested, but still without success.Do I need to attempt to use a cable to install it, or would that be a waste of time too?

Try this Intel Graphics driver:
http://ftp.hp.com/pub/softpaq/sp65001-65500/sp65232.exe
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

HP Officejet Pro L7590 won't print correctly after it sits a few days Windows Vista USB connection

I have a HP Officejet Pro L7590 All In One. It all of a sudden will not print correctly after it sits a few days. I purchased a new black/yellow printhead recently and it did print well for about a week. If it sits a few days, it acts up again. All I have to do to fix it is take out the yellow/black printhead clean with sterile water on a q tip the printhead, put it back in, and walla it prints again until the next time I want to use the printer, and the same thing again. Today I printed out some pictures after not using the printer for 5 days, the pics had large vertical stripes in them, the stripes have colors in them. I cleaned the printhead and it worked perfectly. Any ideas. I have replaced the black cartride, and the yellow recently.
Thanks for any help

Rocky8,
This is a little outside our area of printing, but I'll try and help you the best I can. My question for you is the printer showing up under the USB menu in Parallels. If it's not showing up then you need to determine why the USB connection isn't showing up in your Parallels USB menu. This could be a couple of issues, but the one that I think might be happening is the version of the USB port your using. Can you verify that you're not connecting the printer via a USB 3.0 port. Try plugging into one of your other USB ports to see if the printer will show up in the parallels USB menu.
BT
Working for HP and here to help!

Printing issue after upgrade from 11.5.10.2 to 12.1.3

Hi
I am trying to print the seed reports after upgrade. Text format reports are printing well, the problem is with the XML and RTF format reports, not yet tested the PDF format.
Thanks
Reddy

Hi Hussein,
Application release : 12.1.3
Database Version : 11.2.0.2
OS Version : RHEL 5.5
The problem with the seeded reports only, not yet started testing the custom reports, for the XML/RTF its printing, but the output has lot of junk. If I view the output in the Concurrent request, it looks nice. When I view the file from $APPLCSF/$APPLOUT it has lots of junk, the same way it is printing.
Thanks
Reddy

Report printing issue after upgrading from LV 8.2 to LV 2009

Hello,
I am upgrading an application from LabView 8.2 to LabView 2009. It uses the Report Generation Toolkit to create reports based on Word templates. The reports are pretty complicated, with a lot of bookmarks, tables, and graphs, but only one page long.
The reports are generated correctly. However when sent to printing (using Print report.vi), the printer goes into spooling status and if you are patient enough you may get the report after at least 7 minutes. I tried changing the printer setting to "Print directly to the printer", as per an old KnowledgeBase article. No luck. I have installed a local printer. No luck again.
If I close the LabView application while the printer is shown in spooling status, the report prints right away, every time.
Never had this issue in LabView 8.2. On that machine I had Office XP. Now I have Office 2007...
I do not get any error whatsoever, and I cannot figure out where the solution may be.
I have one single report that prints right away every time I try. Coincidence or not, this is the only one that has no tables to print. It has graph though and plenty of bookmarks.
I have exhausted all the ideas on how to deal with this situation, and I must find a solution ASAP. Any suggestion would be greatly appreciated.
Thanks.

Brandon,
Thanks for your input.
Not sure how I can use it to narrow down the problem though. I ran it, and I see that the printers are correctly identified, the default one is correctly found, however absolutely nothing is being printed out (I typed a text in the string control, and the Print control was on).
Everything runs with no errors. I would prefer to see a bunch of errors ...

Firefox 12 won't start after upgrade from 3.6 in Windows XP with SP3

When I start up firefox after an upgrade to 12 on my Windows XP with SP3 I see the firefox.exe process in Window's Task Manager but it never starts i.e. I never see a browser page. If I try to start it again I get an error message that it is already running.
I have rebooted and even uninstalled/reinstalled Firefox but no browser appears.
Is it possible for my to download the version I had (3.6) and I can just live with that or is there a work-around to get Firefox 12 to work on my desktop?
Thanks

Well I was able to run the profile creator one time (firefox.exe -p) and I created a profile with it but still not able to start firefox. So I tried to start it again after rebooting. It starts a process which I can see in Task Manager but now I don't get either the Profile Manager dialog box or FF.
I also tried to start the profile manager with this command: "C:\Program Files\Mozilla Firefox\firefox.exe" -p.
I terminated the firefox process and tried again but get the same results.
BTW, this command: %APPDATA%\MOZILLA\FIREFOX\PROFILES shows a profile called m6woxz30.default, which is not the name I choice for my profile the one time I got the Profile Manager to run.
BTW, thanks for your help and ideas.

My HP dv4-2045dx won't print wirelessly with my HP Officejet 6500 E709n

My HP Pavillion laptop won't print wirelessly with my HP All In One printer. It will print if it is hooked up, and the printer works wirelessly with my other computer. I've uninstalled the printer and updated the drivers. The print wizard goes through all of the steps to configure wirelessly, finds my printer, tries to connect, and fails at the last minute each time. I believe it may have something to do with the fact that I also can't scan to my laptop.
P.S. It used to print wirelessly. I have no idea what changed.

Yup, here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76971-1&cc=us&dlc=en&lc=en&...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

CP1025nw won't print wirelessly; two copies of printer appear in the network!

My two Macs running Mountain Lion (10.8) won't print wirelessly to the HP CP1025nw. HP Setup Assistant can't find the printer after it's set up wirelessly. The computers see the printer wirelessly when I try to add it, but there are TWO copies of the printer, and they won't print. Sometimes they seem to think the printer is already in use, possibly because there are two copies.
The printer prints fine through USB, though.

Same issue here, the CP1025nw can't print multiple copies UNLESS the user is a local administrator; which in this domain environment is not allowed. So another solution must be found.
The common answer is to adjust the "mopier mode" however this driver does NOT allow for that to be changed. The universal drivers typically do have the mopier setting but I could not find any compatible colour universal 64bit drivers that would work with the CP1025nw.
Even tried finding something in group policy and/or printer permissions, still no luck.
Please help!
We're all in it together.

My MG8120 won't print wirelessly from my MacBook running OS 10.9.5. Works fine with HP printers.

My MG8120 won't print wirelessly from my MacBook running OS 10.9.5 (Mavericks). It works fine with all of the other HP printers in the office. Another user has the same problem with her PC running Windows 7. And she, too, has no problems printing on the other HPs. I or she cannot print to any of three Canon printers in the office.

Hi,
Please try the following steps,
Download every updates from Apple and HP
Reset or Delete the printer from your mac (it may work trhough USB)
Reset all settings into default settings on your printer
Turn off or unplug mac, printer, modem, router
Plug everything and reboot all
Reconnect the printer to home wifi network and mac also reconnect to the correct network
I work for HP. I am speaking for myself and not for HP.
Say thanks by clicking the Kudos Thumbs Up in the post.
If my post resolved your problem, please mark it as an Accepted Solution

Printer won't print wireless

I have a OfficeJet Pro 8600 Plus that won't print wirelessly. I am using Mac OS 10.6.8
To date, I have followed suggestions on the support forum and have tried
1) deleting and reinstalling printer,
2) rebooting all (printer, computer, wireless router),
3) Print test page (worked),
4) reset printer,
5) print network config page (all looked good),
6) checked the printer connection to computer and all was well. I am out of ideas. Please help.
My printer is only 8 months old. Worked fine 2 days ago. I called HP support and they want me to download software to "take over" my computer - I don't feel comfortable with this. They refuse to begin any troubleshooting without that method and refuse a manager. I'm about ready to throw this printer out the window.

It sounds like the printer and your Mac are connected to the network. If the Mac cannot find the printer, it may be the router's inability to properly supprt Bonjour.
What kind of router is it?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My mx882 suddenly won't print wirelessly from my computer after 2 years of doing sowi

my mx882 will not print wirelessly after doing so for 2years. it will print if you lift the lid, put in something to copy, and hit the print button. that of course does me no good for printing documents off my computer. all it says is error when the box pops up showing the inki supply. what's going on. why is this doing this and how it be fixed short of getting a new printer?

Hi musicdude53211,
So we can better assist you, please reply with the following information:
1. What operating system you have on your computer (Windows XP, Vista, 7, 8 or version of Mac OS).
2. Any error codes/messages that are displaying on the printer when trying to print.
3. Whether the printer is currently low or out of ink.
We look forward to hearing from you!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

C6150 won't print after upgrade from Vista to Win 7

Hello.
I have a C6150 AIO that worked fine under Vista. Since I've upgraded to Win 7, I cannot get a printout from any application or the Windows test print. The HP Solution Center test print works fine.
- Printer is hooked up wirelessly
- I've installed the latest driver from HP that is supposed to be Win 7 ready
- I've also installed the patch they recommend after upgrading from Vista
There is no error. Print job shows up briefly in the print manager window, then disappears as though it printed. I'm at a loss, any help would be appreciated.
Paul
This question was solved.
View Solution.

I hope I have now sorted this problem.....
After numerous atems to install HP Windows 7 drivers & apps and failing I decided to restore the PCs to the day before I first installed the Drivers etc.
Then I unistall HP software and reinstalled the new drivers etc. This I had to do a couple of times on the Laptop (restore 3 days back).
After installing the HP software you can print a test page, print OK. Then goto printer properties and ty to print a test page from there, if this is unsuccessful restore system and start again. Most it took me was three attemps.
Now allI have to do is hope that the windows updates dont mess it all up again!
Hope this helps you......... Good luck

HT1338 Do I have to reinstall my print drivers after upgrading to 10.8? I seem to have lost both my printers and my ability to download from my camera. Never had problems with 10.7. I'm a little scared.

Do I have to reinstall my printer drivers after upgrading to 10.8? I seem to have lost the ability to communicate with either of 2 wireless printers and to download pictures from my camera. (Photoshop keeps telling me it can't find the device.) Any suggestions?

Have you repaired permissions and restarted your computer after installing ML? Checked your printer settings in System Preferences?
If Software Update does not list any updated drivers for your model printer, you should go to the printer's manufacturer website and download the drivers from there and/or contact their tech support to determine if your printer is compatible w/ML.
Read the various Knowledge Base ML printing articles. Here are a few to get you started:
OS X Mountain Lion: If the software for your printer can’t be found
OS X Mountain Lion: Troubleshoot a USB printer
OS X Mountain Lion: Troubleshoot an AirPort printer
If none of the above work, post back w/the model of your printer and how it's connected to your computer. USB? Wireless?

Lost Deskjet 5740 printer driver after upgrade.

Lost Deskjet 5740 printer driver after upgrade. HP site has a download but it does not appear in the driver list after downloading it. Ideas?

Okay, as of last night, both the printers are working fine. I uninstalled the 5740 and then tried several different rearrangements of the two printers. First I tried hooking the 5150 to the AEBS and it printed fine. Then I tried hooking the 5740 to the AE and it printed fine. Finally, I tried my original configuration with the 5740 hooked to the AEBS and it printed fine! Very frustrating.... I'm not sure if Apple sent an update I downloaded in the meantime that fixed the problem or what. I can't think of any other possible explanation.
So to recap, I can vouch that I have an HP Deskjet 5740 connected to an AEBS and an HP Deskjet 5150 connected to an AE, all set up on a WDS (wireless distribution system) with Leopard and everything works as expected. Hopefully your printer magically started working again as well Bibycat.

Can't print from IE 8 after upgrading from Vista to Windows 7

My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
Any ideas? Thanks for any help.
Jeff
This question was solved.
View Solution.

(same poster)
If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
Specifically, the following steps solved the problem:
1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
2. From a command prompt, issue this command: ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
Jeff

My HP series 3310 won't print wirelessly after upgrading from windows XP to windows 7 32

Similar Messages

Maybe you are looking for