My HP Split x2 cannot go to sleep or shutdown, keep waking up by itself

My HP Split x2 recently cannot go to sleep or shutdown. It will sleep / shutdown for a few second and wake up by itself until battery died.
Anyone having the same issue?
Seems that HP is not reliable because beside this I also have pointer freeze and SD Card slot that cannot read SD Card (can't even spring out the SD card out properly).
I will not buy HP device anymore !!!

Hey @Rayzng ,
Welcome to the HP forums.
I understand you're experiencing issues with your Split x2 notebook not going to sleep, freezing, and the SD card reader not working.
The sleep issue should be pretty easy to figure out. On your PC, open an elevated command prompt window and type the following command: powercfg -requests
Press enter and it should show you any display, system, awaymode, execution, or perfboost settings/drivers/programs that are affecting sleep settings.
Let me know what shows up in the results and we can go from there.
For the SD slot, I need to know your exact model. For information on finding your product or model number click here: Finding Your HP Product Model Number.
For the freezing, the general steps to take include updating drivers and BIOS. Main drivers to focus on should be the display adapter, wireless adapter, and chipset. Drivers can be downloaded by entering your product info here: HP - Drivers & Downloads.
This should get us started. I look forward to hearing back from you.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Similar Messages

  • HT1338 My Mac Pro won't stay in sleep mode.  keeps waking itself up. Anyone else have this problem?

    My Mac Pro won't stay in sleep mode.  keeps waking itself up. Anyone Suggestions to solve this problem?

    If you can't solve this through other means, get PleaseSleep.
    http://www.dragonone.com/products/macosx/pleasesleep/

  • HT2448 the button restart sleep cancel shutdown keeps appearing every 30 seconds, if I don't cancel, it shuts down, any suggestions out there?

    How do I make the retast sleep cancel shutdown option stop appearing every 30 seconds.  If I am working on safari it doesn't happen but does in mail, when idle etc/ thanks in advacne for any suggetions, EireCowboy

    A number of sleep-related issues can appear after incremental Mac OSX updates, including the inability to properly go to sleep, problems waking from sleep, and having your display go to sleep without your Mac going to sleep. The most common culprit is Bluetooth. Try these tips to fix your sleep problems.
    WAKE UP
    In System Preferences>Bluetooth, uncheck Allow Bluetooth Devices To Wake This Computer. If you are using a Bluetooth mouse and keyboard, you'll have to wake your Mac by pressing the power button.
    FILE CORRUPTION
    Your Bluetooth preference file may be corrupt-you'll need to delete it. Turn Bluetooth off, then go to the /Users/user name/Library/Preferences folder. Look for a file called com.apple.Bluetooth.plist and trash it.The OS will create a new preference file when you enable Bluetooth again.
    ENERGY SAVER
    If you have issues with a Mac or display that goes to sleep at inappropriate times, you may have a problem with Energy Saver. Delete the following .plist files and restart:
    -/Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
    -/Users/username/Library/Preferences/com.apple.systemuiserver.plist--
    (username is your name or System Administrators name)
    -/Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist
    A restart is very important after deleting these plists. After a reboot your Mac will then generate new ones.
    Some, in these forums, have had luck fixing sleep issues downloading the Combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try.
    Yours would be the 10.4.7 Combo update. Others reading, download the combo update that applies to you!
    Cheers!
    DALE

  • Imac keeps waking up immediately after being put to sleep

    hi
    firstly, apologies if this question has already been answered elsewhere in the community
    i bought an imac in june of this year (running most up-to-date version of mountain lion), and normally when i leave it, i put it to sleep instead of shutting down
    have had no issues in doing this until last night.. now, as soon as i put it to sleep, it goes into sleep mode and then instantly wakes itself up again
    i have checked the battery on the mouse and the keyboard (98% and 100% respectively)
    i have nothing plugged into any usb ports
    any ideas on why it keeps waking up by itself and how to resolve this issue?
    thanks

    hello
    thanks for your reply
    i am new to apple products and to the community, and having read the community etiquette i apologise for not referring to the 'more like this' section before i posted - lesson learned
    in respect of your advice, i checked the energy saver options as you suggested and the 'wake for network access' option was unchecked
    interestingly, i have never had this issue until last night and i have made no system changes, downloaded or updated anything?
    still a bit confused, will read through the 'more like this' posts and see if my answer lurks there somewhere
    thanks again

  • I think I finished installing Mountain Lion, and am at the "log in" page with my name and the Lion icon, but I cannot do any of the functions on screen. That is, I cannot log in, sleep, restart, or shut down. I am running it on an Early 2009 Macbook Pro

    I think I finished installing Mountain Lion, and am at the "log in" page with the Mountain Lion icon, but I cannot do any of the functions on screen. That is, I cannot log in, sleep, restart, or shut down. I am running it on an Early 2009 Macbook Pro, which is said to have the capabilities of running Mountain Lion.

    BrettGoudy wrote:
    ...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
    As the last post suggests, call Apple and order a replacement original disc for about $17.  They will ask you the model and serial numbers.
    Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
    Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.

  • Satellite Pro A200GE-1F9 cannot resume from Sleep or Hibernate with SP1

    Hi,
    Laptop Details: [My Laptop|http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie=yes&PRODUCT_ID=131911]
    I've recently used Windows Update to install vista SP1 on my laptop, however since this install I cannot resume from Sleep or Hibernate. (The service pack had installed successfully - according to Windows anyway).
    When resuming from Sleep, I get a blank screen.
    When resuming from Hibernation, I get a STOP error: +Stop 0x0000008E (0xC0000005, 0x82F11020, 0x9A9D9714, 0x00000000)+ caused by *Classpnp.sys*.
    After checking these forums, I've seen that Toshiba does not currently support SP1 +is that correct?+
    +*If so, when/how will we be notified when Toshiba release a "patch" for Vista SP1 compatibility? I'm guessing via the TEMPO service?*.+
    Prior to installing SP1, I installed all updates (from both Microsoft and Toshiba) and had no problems; all drivers remain up to date.
    Thanks for any replies in advance.

    I presume this happens due to a compatibility issue between some drivers and SP1
    > After checking these forums, I've seen that Toshiba does not currently support SP1 is that correct?
    Yes this is right.
    > If so, when/how will we be notified when Toshiba release a "patch" for Vista SP1 compatibility? I'm guessing via the TEMPO service?
    I think there should be information on the Toshiba driver page, support page or we will receive some information from Toshiba via Tempo applications.
    We will see

  • MacBook Pro keeps waking from sleep on its own

    My MacBook Pro keeps waking itself from sleep for no reason.
    I had the battery changed for free by Apple (apparently it's one symptom of a problem with the original battery) but it hasn't abated. (Occasionally it won't wake up from sleep too, but that's rare and so not much of a problem). The main issue is its inability to stay asleep.
    Anyone else had this? I can't find any advice anywhere else and the Genius Bar at the only store I can get to is always fully-booked.
    Any help much appreciated.
    Message was edited by: craigie b

    Hi craigie, and welcome to Apple Discussions.
    In addition to Michael's ideas, there have been some weird sleep issues caused by a System Preference, and although your issue doesn't sound the same, if you run on AirPort (and not Ethernet) I'd check it out anyway:
    -Open System Preferences.
    -Open Network.
    -Click on Built-in Ethernet (note what it says underneath it: Not Connected or Inactive; Inactive is what seems to have caused the majority of other issues).
    -Click the - button at the bottom of the window to delete the original Ethernet pref.
    -Click Apply.
    -Click the + button.
    -For Interface, select Ethernet.
    -For Service Name, enter Built-in Ethernet.
    -Click on Create.
    -Make sure your Location is set to Automatic or AirPort (or whatever you normally have it set to).
    -Click on Apply and close Preferences.

  • G4 MacMini won't sleep or shutdown after update to 10.4.8

    Since updating using software update to 10.4.8 on the logout screen I mostly used the "Sleep" option after logging out from my account. To begin with things seemed fine, but now, it won't go to sleep. If I click on the button to sleep the computer, the controls get greyed out for about 30 seconds to a minute, then return to their normal state - but the computer does not enter sleep mode.
    Shutdown doesn't work either! I had to hold the power switch on the back down for a few seconds to force it to switch off. Interestingly, the internet connection light on the router was flashing irregularly while I was waiting for it to switch off.
    I have reset the permissions (only after the install, not before), reset the PRAM, and searched the system preferences to see if something is glaringly obvious as being wrong but have found nothing and no have no further clue what I can do...
    Is it related to my not wanting iTunes to provide Album Artwork at all? For some time, every time I opened iTunes it demanded I update my Album Artwork, but I don't want to and don't have an iTunes account. I had put off downloading both 10.4.8 and iTunes 7.0 for almost a week - until software update failed to provide a Cancel button for me to refuse again!
    How can I get sleep and shutdown to work properly?
    MacMini, PowerBook, PowerMac G5 DC   Mac OS X (10.4.8)   Mac OS X Server 10.4.8

    Problem Solved!
    I copied the combo update over the existing system but this alone changed nothing. Because I was unsure of which of my seemingly many OS X disks to load I rang Applecare (thank God I signed up for the three years of extra phone support - a real bargain) and they suggested I do a PMU reset - after which everything worked fine - so far.
    They warned me about not doing a PMU reset very often (I guess the PMU can only stand a certain number of these events before breaking). In order to do one follow these steps:
    1) Switch off computer;
    2) Unplug ALL leads and power cables to the computer;
    3) Wait ten seconds;
    4) Simultaneously hold the power on button down while plugging the power cable in to your Mac;
    5) Connect your other cables.
    6) Switch on and go.
    For me, this fixed all my other problems - Sleep, Restart, Shutdown, Printing, iSight, Internet connection speed, Quick Time performance, and so far I haven't seen anything else wrong to fix. Hopefully there won't be anything else to fix!
    If anything does go wrong after this, I will do the Archive and Install, which was the next suggestion from Apple which I did not need to do. So far.
    Thanks to all those who gave suggestions, I appreciate your help.
    Thanks,
    Mac

  • Which is better... Sleep or shutdown?

    Which is better for your computer... sleep or shutdown?
    Thanks

    Technically, it doesn´t matter much if you shut your computer down or just put it to sleep., i.e. nothing is more detrimental to your computer´s "well-being" than the other, respectively.
    I´m not sure about the Sleep Mode with the iMac, but I believe it´s a suspend-to-ram, right?
    That would mean any unsaved data isn´t saved and could get lost if the computer fails to wake up from sleep.
    That could be a point against making the computer sleep.
    When it´s sleeping, the computer will also consume a steady, albeit very low quantity of electrical power. From an energy-saving standpoint, that could also be counted as a negative aspect.
    MacBooks and MBPs use suspend-to-disk as sleep mode, which means the contents of the ram is saved onto the hard drive and then the computer is fully turned off. Takes a bit longer than suspend-to-ram.
    I always put my computers to sleep... both my iBook G3 and my Win laptop.
    My win laptop will automatically enter suspend-to-disk after 2 hours if it isn´t used again by then.
    hth
    ibook g3, acer travelmate w/ pentium m 725   Mac OS X (10.3.9)  

  • I cannot sync my iPod.  I keep getting the following messagei:  AppleSyncNotifier.exe. entry point not fond. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll

    I cannot sync my iPod.  I keep getting the following messagei:  AppleSyncNotifier.exe. entry point not fond. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll  Help!

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • Sleep, Restart, Shutdown loop - how do I get out of this loop?

    I installed os X Panther on mom's older iMac.
    Tonight, when it's booted it comes up with "sleep, restart, shutdown" options.
    We've selected each of these 3 items, waited, then either woke it up, waited for it to restart, or restarted it from shutdown; however, again it will eventually show a screen that only allows her to select "sleep, restart, shutdown"
    How does she get out of this loop?
    Note: There is not option to cancel the screen that has "sleep, restart, shutdown."

    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    It shouldn't be necessary to reboot the computer to complete an update.<br />
    Download a fresh copy of Firefox ([http://www.mozilla.com/firefox/all.html]) and do a reinstall of Firefox on top of the current version.<br />
    You may need to do a clean install:
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data if you uninstall the current version.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • HT203200 Cannot get into itunes via Mac keep getting error −50 ?  help

    Cannot get into itunes via Mac keep getting error −50 ?  help please

    Make sure your Mac's software is up to date.
    Open system Preferences > Software Update > Check Now.
    Restart your Mac after all updates are installed.
    Then try iTunes.
    Which OS X is installed on your Mac ?
    Click the Apple () menu top left in your screen. From the drop down menu click About This Mac. The version is noted there.
    Troubleshooting advice can depend on that information.

  • Cannot add apps to my C150 keep getting error message "Connectio​n Problem"

    I cannot add apps to my C150 keep getting error message "Connection Problem. There was a problem connecting to the Internet. Please try again." I keep trying but keep getting the same message. Web Services is enabled and I can browse the Internet using the Internet icon, any suggestions?

    Hi cdc58,
    I assume you mean C510 not C150.  For those who are experiencing ongoing issues with their web services, you can attempt to try the following steps that may help resolve your problems.
    1.) Completely shut down your printer and restart it
    2.) If you have prints that have not printed, log into ePrint Center (or create an account if you do not have one) and then look for your printer status. If printer status is green but you still have pending jobs, delete the pending jobs one at a time (Starting with the oldest first). There may be a print job stuck in the queue that further restricts other jobs from completing.
    a. If option 1 or 2 above still doesn’t work, removing web services and re-adding web services will cause the printer to reattach to the cloud.
    b. Please note that if you attempt option 3, you will get a new eprint email address (and lose your custom one with no ability to get it back) furthermore, you will need to re-add your printer back to your ePC account.
    I am an HP employee

  • I cannot restore my Iphone 4, I keep getting the error code 1611, please help and the Iphone keeps displaying the "Plug-In Itunes Symbol!??

    I cannot restore my Iphone 4, I keep getting the error code 1611, please help and the Iphone keeps displaying the "Plug-In Itunes Symbol!??

    http://tinyurl.com/nyj36v

  • I'm trying to connect to my work's VPN.  I am connected to the VPN, but I cannot access the server. I keep getting a message that says the server may not exist or is unavailable.  I know that's not the case because my coworkers are connected. Can someone

    I'm trying to connect to my work's VPN.  I am connected to the VPN, but I cannot access the server. I keep getting a message that says the server may not exist or is unavailable.  I know that’s not the case because my coworkers are connected. Can someone please help me? 

    I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
    Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
    No answers here, but you are definitely not alone with this issue.

Maybe you are looking for