My HP wireless Photosmart Printer D110 series shows connected to network, my HP laptop shows offline

HP laptop Pavilion dv6-3210us PC shows my HP Wireless Photosmart Printer D110 series will not recognize each other. Had worked well for past 6 months after I bought printer. I have a new Internet provider - could that give problems? It did work for a while, but now my laptop says the printer is offline and it isn't. The printer says it's connected to the network. (windows 7 operating system. I cannot print anything, why?

If you have a new router you may have to re-install the printer. Is your router new or just your modem?
In the mean time, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

I have a MacBook Pro and can't print pdf files or word documents using my HP Wireless Photosmart Printer. It will print files from the internet. Any suggestions or ideas will be greatly appreciated. Thank you.

I have a MacBook Pro and can't print pdf files or word documents using my HP Wireless Photosmart Printer. It will print files from the internet. Any suggestions or ideas will be greatly appreciated. Thank you.

Hello, SoonerAnesthetist.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
OS X Mavericks: Solve printing problems
http://support.apple.com/kb/PH14142
Cheers,
Jason H.

Photosmart wireless B110 printer has lost its connection with my desktop PC.

My Photosmart wireless B110 printer has lost its connection with my desktop PC. I can still print from my laptop so I know the printer is working fine.
When I check ink levels through 'Printer Proerties' the message I get is 'The computer is unable to establish two-way communication with the device', so I guess this is a clue. I would appreciate any help you can give.
THank you.

Just as a preliminary step, we're going to go through a complete and clean uninstallation and reinstallation. First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Then follow this link to download the full feature software and drivers for the printer (be sure to select your correct OS):
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4022343
Install that and let me know the result!
Have a great day!

IPhone 5 setting shows connected to wifi but screen only shows 4g

Any ideas? Settings shows connected to wifi but phone keeps showing 4g by cell signal strength instead of wifi icon

That's really strange - probably not the answer you want to hear but it might be worth calling Apple Technical Support:
800-694-7466
Let us know what you find out and good luck.

Wireless direct print 3250 series

I am trying to set up the wireless direct print feature on my 3250 series all-in-one printer so that I can print wirelessly without a router. I have followed all of the instructions online. I have turned on wireless direct on the printer and have connected to the wireless direct name on my computer. However, I can't get my computer to actually print anything wirelessly. Please help!!!!

Hi a45,
What device are you using to connect the 3520?
If using a computer or laptop, you have to install the printer drivers in order to use direct print or scan: http://www8.hp.com/us/en/support-search.html?tab=1#/qryterm=3520||&searchtype=s-002
But if using an iPad, tablet, or other mobile device, printer driver install is not required.

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I can connect the laptops to the printer. Any advise?

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I am not able to connect the laptops to the printer. Any advise?

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

Moving printer from direct USB connection to network

I am trying to move my printer from direct USB connection to the network by using my NAS' print server. I see it fine in trying to setup the printer, but the printer model does not show up as an option. How do I get it added? It is an HP photosmart 7350. Thank you in advance for any help. --Jeff
Dual 2 GHz powerPC G5 Mac OS X (10.3.9)

Hi kayc_89_07,
If you still have the printer CD you can re-run and use the USB to wireless setup from there. If not, then you can manually add the printer. What operating system do you have?
You have to make sure first that your printer is connected wirelessly. You can print a Network Configuration Page from the HP product control panel. The page includes the product IP address, and MAC address as well as the product network status. Follow these steps to print the information:
On the HP product control panel, press the Wireless button ( ). The Wireless Menu displays.
On the Wireless Menu, press the button ( ) next to Print Reports .
The product prints a Network Configuration Page
Let me know so I can assist you further...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Cheers!
* If this post has helped you, the White Kudos star on the left is a great way to say thanks!
* Please mark Accept As Solution if it solves your problem so other users can benefit as well.

Photosmart C7180 says it is connected to network, but installer does not find

BACKGROUND:
Primary Computer
I have a mac-mini running both the latest Snow leopard build, as well as Win 7 Pro ver 6.1 build 7600 (64-bit). When I first got the computer, OSX ran through its initial setup. I then downloaded and installed the HP software for the printer for the mac and everything including wireless network scanning worked beautifully.
I then installed Win 7 using a bootcamp partition and went through the same thing, including installing the 64-bit version of the HP software. All worked great as with the OSX partition - for 2-3 weeks.
Network:
Belkin F5D7231-4 v4000 router running WPA2 with AES encryption. I also use MAC address filtering.
PROBLEM:
As mentioned before, all worked great for 2-3 weeks until...
To try and install a blu-ray, I was going to use a spare router as a wireless access point/bridge. I installed new firmware for my Belkin router as advised by belkin tech support. As a result my router lost all original settings. I entered in all MAC addresses for equipment I use and enabled them to have access to the network.
After several unsuccessful attempts to print again. I checked my printer status screen and it indicated that it was successfully connected to my wireless network. Tried restoring the printer to original network settings and reestablishing the network connection. The printer display says it successfully connected after I entered my network password/passkey into the printer, but still no printer shows up on the computer when I tried to install. I removed all drivers and software, using the uninstall utility as well as the driver removal tool on the HP website. I tried reinstalling the printer, but it never showed up as connected by the software for wireless installation. I uninstalled everything again and , based on suggestions, tried installing the printer over a USB connection first, then installing wirelessly. Still no success.
I have checked my router settings (including refreshing DHCP settings) to make sure that the printer shows up on my router. It does indeed show up as connected to the router. However, the HP network diagnostic utility for some reason cannot find my printer. I checked the wireless network summary on the printer display and it shows the same IP address for the printer as shown in my router setup utility (192.168.2.9).
I would like to get it going in the Win 7 partition first, then I can address the OSX side.
Does anyone have any clues or suggestions? Thanks in advance!
EDIT: I should add that I disabled the windows firewall and the antivirus program I run while installing/uninstalling.

Well, I see a few things that can be in the way:
1. MAC address filtering is really not a security measure since the MAC addresses are sent in the clear (unencrypted) and many devices can have their MAC addresses changed easily with software. I'd recommend losing the MAC filtering and just use WPA2 and be even more secure than you are currently.
2. If you disabled the firewalls during the install, that may have been a bad thing. The installer is supposed to create ports through the firewalls during install, so if they are disabled and later enabled, the ports are not there.
3. Does your printer show up if you type its IP into a browser?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Printer suddenly unable to connect to network (invalid password)

I've had this printer for half a year and haven't had any issues with network connection till recently. For some reason my printer will no longer connect to our network. I've typed in the correct password multiple times but it always comes up with an invalid WPA passphrase.
My laptop and other devices have no problems connecting to the internet. The printer recognizes the wireless network but says the passphrase is "invalid". I printed the diagnostic and it says, "The WPA security passphrase configured on your HP printer does not match your wireless router setting". The solution they gave was "Run the wirless Setup Wizard to re-enter your wireless network WPA security passphrase."
The solution does not help.
Some of the results from the printed diagnostic test:
Connectivity> connected = Not Run
Disconnect count total= 70
Network> Network SSID Found= PASS
Settings> Printer settings consistent with wireless router settings, no filtering, channel = Not Run / Security = FAIL
Current Configuration> Authentication Type = WPA- PSK / Encryption= Automatic (AES or TKIP)
We are running on a 802.11 network, channel 11 (I don't really know what this means..but maybe it's helpful information?)
If anyone has some insights that would be greatly appreciated!!

My printer mysteriously started working again as well. Nothing has changed on my equipment. What gives?
As for the "Great" support from HP with the Static IP address, I don't see any replies from HP on this thread helping us out.

Photosmart printer C4400 series

Hi,
Since I got my new computer, Mac Mini, my scanner hasn't worked.
The model # is SNPRB-0721 and the product # is CN95GM41CR

Hello,
You may want to download the drivers for your OS from the link below and try installing again:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3418705&lc=en&cc=us&dlc=en&lang=en&cc=us
I work for HP but my posts and replies are my own.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Printer is connected to network but doesn't show up in Bonjour since a power outage.

Our friends have an HP printer connected wirelessly to an AirPort. They were able to print with no problem until they unplugged it during an electrical storm. Since then, their Windows laptop has been unable to find the printer in the Bonjour list. We tried restarting both the printer and the computer, but no luck.

ok so i got a ipod nano for xmas...and i have
had so many different things go wrong its not even
funny! so here's my question...when i connect
my ipod to my computer it charges just fine..but when
i have itunes open...is it not supposed to show up
under a device list, so u can sync the songs
to your ipod??? well my ipod is not showing up in the
device list...how do i get it to show
up? its registered, and i have unplugged and
replugged in the usb cable!!! HELP ME!!! it
worked before but now its not showing
up!!!
ipod nano
Windows XP
gateway Windows XP
Holy freakin crap the new nano i got was working absolutely perfectly and then one day it decides to stop freakin showin up in my cpu, i looked under hardware and everything, mine charges and i wanna know if a new cable really would help because i just restored my ipod by mistake then i went to put songs on it and it worked but it got more songs and i can't put them on and im mad now and i cant tell my parents theyll flip.... HELLP ME !

Photosmart 6520 e Windows 7 printer says it is connected to network, but will not print.

I've followed all suggestions in troubleshooting both from manual and on line. Shut off firewall, unplugged, plugged waited. Nothing changes. All printouts from the printer say connected, but will not print and computer detection of the printer says cannot be located. Help!!

Glad you were able to find the problem. I am sure that the Print and Scan Doctor would have come to the same conclusion Thanks for sharing what the cause was...I am sure others will benefit from it if they also have this issue.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Printer will not stay connected to network

The printer will no longer stay connected to the network. If we turn the printer off and back on again it will print but shorly after it says "The printer is not connected. Again, turning it off and back on again will allow it to connect. Tried uninstalling it and reinstalling, did not make a difference. The firmware is the latest and all drivers are up to date.
Solution?? I have two kids in college and this is becoming very frustrating.
Thank you,
Joanie

Hi @jraitt , I would very much like to help you with your 6500a plus.
Please use the following document to troubleshoot the issue, and let me know the outcome of your efforts; Printer Does Not Maintain Wireless Connection.
As a work around, if the issue persists, you could connect an Ethernet cable from the printer to the router. This will disable the wireless in the printer and possibly allow a more stable connection. If however you connect an Ethernet cable and the issue persists, we will then know the issue is not the printer at all and is the router.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

IPhone shows connected to network, but no wifi icon, not Router or DNS listed

Hi. Just purchased an iPhone 4g for my daughter. Am trying to connect to our home wifi network. My phone works fine, shows I'm connected, shows IP, Subnet Mask, router, DNS. The new phone shows it's connected in settings / Wifi Networks (check mark) but them there is only the IP address and Subnet Mask listed, no DNS or Router. Have tried rebooting, forgetting network and starting over, turning wifi on and off, turning airplane setting on and off.
What is going on? Husband had similar issues with iPod touch, but can remember how he resolved it. All of our Mac laptops can connect to the home wifi network.
Thanks in advance for any insights!

Same problem here and I can't find a solution either.

How to setting up new (June 2011) TC to do wireless time machine backup but not connected to network?

Hello. Just got new (refurbished June 2011, 2TB) Time Capsule. My building has a shared wifi network, and I'm assuming it's hard to join the network with Time Capsule and still be satisfied with security/privacy/performance. (Of course, if I'm assuming wrong, please let me know!)
My understanding is that I can use Time Capsule wirelessly to do Time Machine backups by switching out of my wireless network to - I assume - a new Time Capsule generated network(?). It's an extra step, but that beats connecting cables to the computer everytime I need to do backup. Basically it's like an external wireless hard drive that I have to join everytime the backup is updated, right? (Again, if there is a better way to go about doing this, please let me know.)
So how do I go about doing this? The setup manual isn't helpful (not at all).
Here's more detail if necessary. I have 10.8 Macbook Air (which I plan to upgrade to 10.9 soon) and my spouse is running 10.9 Macbook Pro. I am also assuming I don't have to partition Time Capsule, and when the Time Machine backs up, it'll figure who's who.
Thanks in advance.

Hello. Just got new (refurbished June 2011, 2TB) Time Capsule. My building has a shared wifi network, and I'm assuming it's hard to join the network with Time Capsule and still be satisfied with security/privacy/performance. (Of course, if I'm assuming wrong, please let me know!)
Security is ok.. but performance is abominable.
The TC unfortunately has some design limitations that Apple imposed that makes it rather poor for anything but ethernet.
There is a couple of ways around the problem of sequential internet or backups.
1. Get a wireless bridge that is suited to your in-building system.. and plug that into the TC so it can take normal router settings .. This will give you double NAT but I doubt your in building system will be handing out public IP anyway. An airport extreme can do this. Although it is pricey for the same results as a $35 standard wireless bridge. All devices in your place will then get both internet and backup direct to the TC.
One flaw here could be the download limits.. if you have two connections do you get double the downloads.. ??
ie how many IP are allocated to you?? And is it divided between all of them or the more IP clients the more download bandwidth?
2. Use a USB wireless stick in the Mac.. these can be tiny little things now.. just buy Mac compatible ones.. use that for internet and use the internal (faster) wireless for local connections. there are some manual setup tricks needed here but nothing hard.

My HP wireless Photosmart Printer D110 series shows connected to network, my HP laptop shows offline

Similar Messages

Maybe you are looking for