My HP1610 all in one prints top of page, unable to read faint printing on majority of page.New cartr

I have installed a new black cartridge in my 1610 All in One, Previous cartridge was low on ink when it stopped printing the majority of the page. Print test on new cartridge is fine. Top of page and all of line border is fine. From 1 1/2 inch from top printing is too faint to read. Line border prints completely. Bottom of page prints faintly but enough to read. What now?

Welcome to the HP Community , I read through your post about the printing issues you have been having, and I hope to help you! Seeing how the printer will make copies and test print tells us that the printer itself is fine and there is no hardware issues. However, seeing how printing from two different computers will not work, flags a software problem on the computers. Please try out the steps below and get back to me with the results and we will go from there. If you did not install the Full Driver, run the HP Printer Install Wizard for Windows to search and install the complete driver and software. This will need to run on both computers individually. Manually restart the print spoolers on the computers:1. Click Start
2. Type "Services" in the search field.
3. Open SERVICES
4. At the bottom, click "Extended View"
5. Search for Print Spooler
6. Right-click it and choose Properties
7. Select as Automatic in the drop down box, close the Window
8. Right click on Print Spooler and choose "Stop", wait until it stops and then right click again and "Start".
9. Close out of Services and try printing from Notepad.10. Try printing from a web browser now, if there is a problem with the print, try a different web browser. Show thanks for my reply to help you today by hitting the "thumbs up" icon below!I hope to hear from you, good luck!

Similar Messages

Hi, I have a HP f380 all in one printer. I have installed new black ink cartridge and get error.

Hi, I have a HP f380 all in one printer. I have installed new black ink cartridge and get error stating please insert black ink cartridge.
Please Help

Make sure it is a genuine HP cartridge. Take it out and clean the contact on the cartridge and in the printer. Try again.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP Photosmart C7280 All In One printer not campatible with windows 8.1

I have an old Photosmart c7280 all in one printer. I bought a new computer that has windows 8.1. HP doesn't
have software or drivers that can make this printer compatible with my new computer. What can I do besides buy a new prfnter?

Hi,
Please download the following Software and Derivers and install on your new Windows 8.1 machine:
http://ftp.hp.com/pub/softlib/software12/COL30662/mp-110038-1/PS_AIO_02_Net_Full_Win_WW_140_408.exe
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I Have a Mac 10.2 and a HP 6700 all-in-one printer,when I set-up to print the top line of the image is cut off

I Have a Mac 10.2 and a HP 6700 all-in-one printer,when I set-up to print the top line of the image is cut off

If there isn't a Page Setup in the Print Dialog, open Text Edit>Edit>Page Setup, check borders there or use Custom Page setup & save.

Installed a new harddrive in my macbook pro. cannot connect to hp photosmart all in one printer!!

I, recently, installed a new hard drive on my MacBook Pro Laptop Computer (2007 model).
Now, I cannot print out anything on my HP Photosmart C7180 All-In-One Printer! They don't
seem to be connected, as the printer icon shows up on my computer, and then, immediately, evaporates
into thin air.
How do I connect my HP Printer to my laptop, now that I have a new harddrive installed?

Hello Lady22:
When you received your printer you should have received two insulation disks one is for Windows computers and the other one is for Mac ( Apple Computer) If you have the disks please install Mac disk. Apple computers do search and down load the parcel software so you can do basic printing commands. You need to find the program that is some where in your computer that allows you to hook up Pinters and Devices. Ounce you find this open it up then connect the printer cable to the lap top. The computer program will list HP's printers yuo need to select your printers model number. Then it will down load the drivers for it to run basic commands. Ounce they are download run a test to make sure it is working right. Contact HP's store and asked them to send you a new set of insulation disk. Your old disk may have fine dust film on them. Clean them off pior to inserting them If you use glass cleaner and fine cloth make sure they are dry off before you insert them. If you used them before maybe a speck of dirt blocked out parcel program that caused it not to install correctly . frrw

HP Deskjet F2120 all in one printer driver not installing after upgrading to Windows 7

I have a HP Deskjet F2120 all in one printer. I was working fine in Windows Vista Home Premium 32 bit.
Once I upgraded to Windows 7 Home Premium 32 bit the driver is failing to install.
I have tried all the solutions provided on the HP website but none of them worked.
I also wrote a mail to HP support but they replied that its out of warranty hence they will not be able to help.
If some genius can help me I will pray for him/her that all his/her wishes come true.
Thanks you in advance.
Imroz Baig

I just got my HP Deskjet F2120 working in Windows 7. Here's how:
Insert the setup disk in your CD/DVD drive. Choose to view the files in Explorer. Scroll down to the file "Setup," which is identified as an application.
Right-click the file and select "Properties." Click the "Compatibility" tab at the top of the resulting window.
Check off "Run this program in compatability mode for:" and choose "Windows Vista" from the pop-up menu.
ALSO check "Run this program as administrator" at the bottom of the window.
Press "Apply," then "OK."
Now you can double-click the "Setup" file and run the software installer.
It will 100% work inshallah...

HP Officejet 4630 all-in-one printer Cancels Print in Middle of Job

Hi,
I recently bought an HP Officejet 4630 all-in-one printer, and it automatically cancels jobs in the middle of printing. The computer I am using is an HP Envy dv7 with 64-bit Windows 8, and I am printing over a wireless network connection. My computer receives an error that HP Officejet 4630 series couldn't complete print and the printer simply says canceling. I have tried all the steps in the troubleshooting sections, both for printing issues and network connections. I've uninstalled and reinstalled the software multiple times, I've established a manual IP, and everything else, but nothing seems to work. It also seems to have the issue when using HP ePrint. It happens in all sorts of programs and formats such as word, pdf, and html. Unfortunately, I did not receive a USB cord, so I can't see if that will fix the problem at all. Hopefully somebody can help me with this, otherwise it's obvious that there's a problem with the actual printer I got and I'm going to have to get something else.
Thanks
This question was solved.
View Solution.

This is how I fixed it:
Find out what the IP address is that your printer is using.
Then go to control panel and click on "View Devices and Printers".
Look for your printer an right click.
Click "Printer Properties" and a new screen will open.
Along the top you will see some tabs. Click the one that says "Ports"
Click "Add Port"
Highlight "Standard TCP/IP Port" by clicking on it, then click "New Port". A new screen will open.
Click "Next"
Type in the IP Address of your printer and click "Next"
Your computer should find your printer.
Click "Apply" and your printer should work correctly.

How can i print between my galaxy s4 and hp officejet 150 mobile all in one printer

i have connected my hp officejet 150 mobile all-in-one printer to my lap top. Now I want to connect my printer to my smartphone galaxy s4 via bluetooth but the phone is new and I am not sure next steps. Help.
This question was solved.
View Solution.

Printershare worked out great. I have tried so many apps, glad to find one that worked for my mobile officejet printer and android s4. Now the true test, take it on the road. Thanks all.

Paper Jam for HP PSC 1610 All-in-One Printer

Paper Jam for HP PSC 1610 All-in-One Printer:
I had a paper jam and cleared the paper from the printer. Now every time I turn the printer "on" it picks up the top piece of paper from the tray and runs it about ½ to ¾ of the way thru the paper feed, stops, and then displays message "paper jam clear paper and then press OK". When I do that it simply picks up the next piece of paper off the tray and does the message again. If I push the OK button on the printer it will simply finish the ejection and then pick up the next paper from the tray, and do the same thing. I have examined the interior (and exterior) of the printer for paper scraps and any other obvious sign of trouble (dirty drive wheels, missing rollers, broken springs, etc...) and can not see anything unusual. I can not print a test print because of the paper jam message. I am running Windows XP and the printer has been working fine for months (until this recent jam). I did all the steps from the HP fix it site including clean rollers, plug and unplugged, carriage travel OK and more. Don't know what to do now........Any help would be great!!!! Thank you!

Hi my printer psc 1610 hp not picking paper

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper. I would like to have a custom size to work with a card making program.

Can you help me out?
I have an HP Officejet Pro 8600 N911a
When I try to print to a custom print size (2.75" x 6" in my case), I get the same error everyone else is reporting: "Paper detected does not match paper size or type selected. Make sure the paper size or type is correct to continue the job."
I am currently trying to print using Microsoft Word for Mac 2011 version 14.4.5, but I have the same problem with printing from Adobe Reader 9.8.5 or Preview 8.0.
I am running OS X Yosemite 10.10.
My printer's firmware is "up to date" as of 28-Aug-2014.
This is what I did:
1. Open System Preferences from the Apple menu.
2. Click on the Printers & Scanners icon.
3. Click on the + sign under the list of printers to add a printer
4. Click on IP
5. Enter my IP address in the Address field (verified as "valid and complete host name or address")
6. Ignore Protocol field (default is Line Printer Daemon - LPD)
7. Ignore Queue field (default is blank for default queue)
8. Ignore Name field (default is IP address)
9. Ignore Location field (default is blank)
10. Under the Use dropdown menu, I select "Select Software"
11. HP Deskjet 9800 is not an option.
I searched for 9800, but there is no HP printer with that number in the options.
I tried selecting "HP DeskJet 980C - Gutenprint v5.2.3" to see if that would work, but I received the same error message as above. I tried selecting other random HP printers, but so far I've had no luck.
I've been googling about for a way to manually add a printer driver to this "Select Software" list, but I've found nothing (apparently, no one else wants to do this). I did not find a driver download for the HP DeskJet 9800 for OS X Yosemite 10.10 on the Drivers & Software section of the hp.com website.
Additional details on settings for Microsoft Word for Mac 2011 version 14.4.5:
Selected File > Page Setup from menu
Under the Paper Size drop down menu, I selected manage custom size.
- Click + to add a paper size
- Enter "2.75" in width and "6 in" height in the paper size fields.
- Enter "0 in" as the User Defined Non-Printable Area for top, left, right and bottom.
- Double-clicked Untiled in the custom size list and rename the size as Receipt
- Click OK to return to the Page Setup dialog box
Under Settings: Page Attributes:
- Format for "HP Officejet Pro 8600"
- Paper size: Receipt
- Orientation: "tall/portrait"
- Scale: 100%
- Click OK
Select Format > Document and set all page margins to 0.25"
Thank you.

Printer: Driver Update Problem with HP 6700 All In One Printer

My HP 6700 All in One Printer is not set up correctly on my laptop (16 months old),. I need to update the Driver but the auo system says the driver can not be found, when I try to do in manually it loads onto my lap top but does not update the printer. Any suggestions?

Hi,
I request you to try the following:
For network connection:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03086294&tmp_task=useCategory&cc=us&dlc=en&lc=e...
For USB:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03521864&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Although I am an HP employee, I am speaking for myself and not for HP.
Say thanks by clicking the "
Kudos! Thumps Up" which is on the right
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue
Regards,
Ray

Cleaning print head HP Officejet 4315 All-in-One Printer support

Hi,
I'm having a problem with my
HP Officejet 4315 All-in-One Printer.
I'm using Windows 8 and have topped up the ink levels. The printer is printing with white lines which I understand indicates that the print heads need cleaning.
All the advice I can find online says that to run a print head clean from your computer you need to go the printer in control panel > select printer properties > then click on the 'maintenance' tab.
Using Windows 8 it appears there is no "maintenance" tab and I cant find any option to clean print heads elsewhere on the properties tab!
Not sure where to go from here?
Many thanks for your help in advance.

That is the only way you can clean the ink cartridges. I would recommend contacting HP technical support for further assistance. Click here to find out: HP Worldwide Contact.
Good luck.
I worked on behalf of HP.

I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?

I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?

Hi,
It won't work with airplay, here is how I got it to work with OSX 10.9.4 fully patched;
you will need to use the serial cable to start the process:
In-brief Version:
0) Go grab the firmware update tool, the driver, and the scanner software
1) Turn off the firewall and antivirus (if you use it ??)
2) Update the firmware using the serial line
3) Reserve a static IP outside the DHCP range (using the MAC address of the printer) on your WAP server
4) Configure the printer to use a static IP through the front panel
5) Configure the printer WIFI with your SSID and net key through the front panel
6) Install the CUPS driver on your computer through the printer settings by specifying the static IP
7) Install the Scanner driver then go into the Control Center and add you computer and printer configuration
I generally use this kind of set up so that the printer comes back at the same place after a power failure in
the event that it has a crappy driver.
For those of you who need a little more help:
0) Turn off anti-virus and firewall software (it did seem to matter)
1) Go to the Brother Center and download 1) The firmware update tool, 2) the driver, 3) the scanner software
2) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; find the MAC address and write it down
3) Plug the printer in using the serial cable, it will auto detect and you will be able to talk to it.
4) Install the firmware update tool by double clicking on the dmg you downloaded
5) Update the firmware and the subfirmware (NOTE: this is a bit finicky -- you may have to unplug and replug it in a couple of times before it starts to talk with the device, after it starts the update process it frequently gives up in the middle, DO NOT unplug the device at this point, just select "retry" from the dialog and it will continue -- it will take about 15 mins or so.
6) Once the firmware is installed, go to your WAP server and look at the DHCP IP range; typically something like 10.0.1.2 to 10.0.1.200
7) If there is a capability to reserve an IP on your WAP server pick an IP outside the range in 6 (e.g. 10.0.1.201) and use the MAC address (from step 2) for the reservation... its fine if you don't reserve it -- this is an extra precaution -- just make sure you pick an IP outside the DHCP range
8) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; then set the IP address:
     boot method: static
     IP address: the address you chose in 7)
     mask: 255.255.255.0
     gateway: the IP of your router -- typically 10.0.1.1
8) Go to the front panel on the printer: tools -> wireless -> setup wizard -> let it find your network, select it, and enter your key.
9) Reboot the printer and check it connects to your wireless network
10) Go to the front panel on the printer, tools -> all settings -> print reports -> network configuration ; print the report and check the IP and MAC
are what you think they should be.
11) Go to your computer, bring up a terminal (applications->utilities->terminal)
12) Ping your printer to make sure its up and accessible -- type: "ping 10.0.1.201" (or whatever IP you used in step 7) and check you get a response -- not a timeout -- if it works disconnect the serial line and delete the (serial line) printer from the list of printers -- you won't need it anymore -- if not you screwed up somewhere along the line
13) Now the printer is on the wireless network, install the driver by double clicking the dmg. Then go to system preferences->printers & scanners
     click +
     in the add menu click IP
     enter your IP (from step 7)
     make sure the Protocol is IPP
     Name the printer and set its location
     Go to Use field, in the pull down menu select "Select Software"
     Go through the list and find the Brother MFC-9340CDW CUPS driver -- if its not there you screwed up installing it so go do it again.
14) Go back to the printer page -- select the printer, select Open Print Queue, then select Settings -- check the Driver Version is 4.1.0 -- if
it says 2 you are using the airplay version which seems to be buggered -- so you need to try again.
15) Go open a word document and print it -- smile you are nearly there
16) Install the scanner software by double clicking the dmg
17) Open the Control Center, under the Model: select Other
     Click +
     Select your printer
     Enter your computer name in the display name and click ok
18) Go into adobe Acrobat File->Create->PDF from Scanner (or whatever software you are scanning with)
19) Select "Brother TWAIN" from the scanner list -- if its not there you screwed up the scanner software installation -- go do it again
20) Put a document in the top of the printer and press scan -- wammo !
21) Turn back on your firewall (and antivirus if you have it -- why I can't imagine but what the ****)
22) Go ping the printer and make sure its still reachable (see step 12) -- if not you need to figure out what your antivirus is screwing up because the firewall is no problem
23) try printing and scanning again...
24) rejoice... your done.

How do I uninstall my Canon all-in-one printer software?

How do I uninstall my Canon all-in-one printer software? I followed the online HELP instructions of moving the apps to TRASH. But I still had lots of files, and one app, that I could not get rid of.

Huh! How simple can it be?
Thank you, very much. I still have a few Canon files and one app remaining. I'll send them to the trash. But, the really annoying scanner icon on the bar at the top of the screen is gone.
Thanks, again.
Dave

I have 1 HP Officejet J6480 All-in-one printer, when I print a page off of the net, it only prints o

I have 1 HP Officejet J6480 All-in-one printer, when I print a page off of the net, it only prints one top line (ex: Page 1 of 1) and it only prints the footer. It does the same with my HP Deskjet F4100 series printer.

Call and/or check HP Support website for updated drivers. You can also check KB Articles: http://support.apple.com/kb/HT3669 Printer and scanner software available for download
and http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
What to do when you can't print

My HP1610 all in one prints top of page, unable to read faint printing on majority of page.New cartr

Similar Messages

Maybe you are looking for