My hp4530 will not print after installing Yosemite
After installing Yosemite my printer will not connect because it is not "found" by my macbook pro. I re-installed the driver, but that hasn't worked. What else can I do? I've restarted, unplugged . . . all the obvious things haven't been successful.
Hi Bella,
This video helped me Printer/Scanner Fix With Yosemite No Matter What Brand. another thing you might want to do if that doesn't work is to add your printer by IP adress
-crazy
Similar Messages
-
Photoshop CS4 will not launch after installing Yosemite.
Photoshop CS4 will not launch after installing Yosemite. All the other CS4 apps open. I upgraded Java. Genius Bar could not get it to launch.
Here's the fix I found, by way of an explanation...
Snow Leopard prompted me on my first startup with the following error:
"There is a conflict with the _______ font file. This font file contains a font name that conflicts with a system font required by Mac OS X to display onscreen text. You should move this font file to the Trash."
The fonts it said were conflicting: Helvetica, HelveticaNeue.dfont, Lucida Grande, and Monaco. I figured Snow Leopard probably wanted to replace these fonts with newer versions, and so I clicked "Move to Trash" on all four.
Apparently 10.6 trashed these fonts but didn't replace them. This was causing Photoshop to crash on load.
So I restored my ~/Library/Fonts folder from a backup made just before upgrading and this time after a reboot I said "Allow Conflict" on all four dialog boxes and launched Photoshop... everything is back to normal!
Not sure what kind of "conflict" it's referring to, but apparently moving these font files to the trash as OS X prompted me to do broke a number of apps. Should I report this as a bug?
Thanks for the ideas! -
Itunes will not open after installing yosemite
I installed Yosemite and have tried to repeatedly. Get my new Itunes 12 to open but it refuses. It will not make any indication that it is attempting to open. I have tried to reinstall it a number of times and it still will not open.
any help is appreciated.
davidHi,
I've encountered the exact same problem.
iTunes wouldn't start up at all, even tough it had the correct version.
By browsing to the applications contents and running the itunes exec it would work.
Also running it through Terminal would work. But simply not by clicking the iTunes.app
However i've fixed it! by manually setting read and write so that you can delete the iTunes.app. (for a tut see http://www.tekrevue.com/tip/uninstall-itunes/)
Then manually Install iTunes again by downloading it at http://www.apple.com/nl/itunes/download/
Then it worked fine with me! Hope it helps. -
How do I get pages, numbers, keynote, iPhoto and iMovie to update after installing OS X 10.10? I have the original disk.
Cancel the updates. Delete the apps. Redownload them from the Purchases tab in the App Store.
-
My mac book will not start after installing yosemite
CCan somebody help me with this problem?
Hi karenfromherne,
If your MacBook will not power on I would suggest that you troubleshoot using the steps in this article -
Troubleshooting: My computer won't turn on
Thanks for using Apple Support Communities.
Best,
Brett L -
is there an an Apple approved procedure to fix Safari from crashing? From posts that I've read, this was an issue in the Beta version, so I wonder why it was not fixed before it was released. I work all day and don't have a lot of time in the evening to troubleshoot something that should have been tested and approved before releasing. Apple, It just doesn't work.
is there an an Apple approved procedure to fix Safari from crashing? From posts that I've read, this was an issue in the Beta version, so I wonder why it was not fixed before it was released. I work all day and don't have a lot of time in the evening to troubleshoot something that should have been tested and approved before releasing. Apple, It just doesn't work.
-
Telephone will not work after installing fax wizard
I have a new HP Office Pro 8615. After I installed the fax wizard, my telephone quit receiving or sending calls. The only incoming call will ring on the fax. Can I uninstall the fax, as I do not need it?
Hi , Welcome to the HP Forums! I see that your telephone will not work after installing fax wizard, for your HP Officejet Pro 8615. I am happy to help! What is the Operating System you are using? Windows or Mac? What version? If you do not know the Operating System you are using, please visit this website. Whatsmyos. If you do not need the fax, all you should have to do is unplug the phone cable from the back of the printer. That will prevent the printer from using the fax function. If your phone continues not to work, I would consider contacting your phone provider. Thank you for posting! “Please click the Thumbs up icon below to thank me for responding.”
-
Premiere Elements 12 will not run after installing on my HP laptop with Windows 7.
Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12! -
PE 9 will not load after installing Elements 10
Installed Elements 10 on Vista 64-bit. Did not uninstall Elements 9. Now PE 9 will not load; get window Adobe Premiere Elements.exe - No Disk. There is no disk in the drive. Please insert a disk into drive\Harddisk2\DR2. Tried disk 2 of 3 from package, nothing happens.
Tried twice, PE9 still locked up both times - I think the intent is to have me try PE10, because that did work!!!
From: Steve Grisetti
Sent: Monday, January 02, 2012 7:09 PM
To: cptiger
Subject: PE 9 will not load after installing Elements 10
Re: PE 9 will not load after installing Elements 10
created by Steve Grisetti in Premiere Elements - View the full discussion -
B210a will not print after changing router\modem
b210a will not print after changing router\modem. Says it is connected to network, but will not print and says unavailable
Good morning,
Please use the second section of the following article to fix:
http://www8.hp.com/au/en/campaigns/wireless-printing-center/reconfiguring-system-help3.html?jumpid=r...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Have a Canon MX860 and the magenta will not print after several deep cleanings
Have a Canon MX860 and the magenta will not print after several deep cleanings
Hello allenaeifert.
Unfortunately, if the issue persists after deep cleanings have been performed, we would have to advise that you contact our support group at 1-800-OKCANON for additional assistance with this issue.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
My (2) I5 phones ios 8.0.2 firmware 7.03.00 will not rotate after installing IOS 8. I have lock portrait orientation turned off. It won't even after turning the phone to the portrait landscape position it will not even turn TURN ON!!
It shows I5c... the phones are I5 not I5c's
-
Hi there,
Can anyone out there help, after a recent Apple software update my Epson Stylus Photo RX640 will no longer print, every other aspect of the printer works fine including the scanner but it just will not print, I sent an email to apple but all i got was an automated reply directing me to their support page, the email i sent is below this explains in full what the problem is & what i have done to try & fix this problem.
Dear Apple,
I'm pulling my hair out after a recent software update from apple, since this update my Epson Stylus Photo RX640 will not print, every other function of the printer including the scanner works fine,
Please see attached file of the error message coming up in the print queue.
I have spent days trying to fix this, i have been onto Epsons website & followed their resolution for this error message to no avail, after contacting them again with the results i got an email back saying : In response to your email, the RX640 will use an inbox or gutenprint driver on Mac OS X 10.6.8, it is not compatible with an Epson driver.
I have also tried re-installing drivers from original Discs for the printer but it still will not print, obviously this error has been caused by Apple's latest software update, when are Apple going to fix this problem? i need my printer working ASAP.
Regards
Brian
PS i obviously can't attach the error message so here it is: Error:/Library/Printer/Epson/inkjetprinter 2/filter/rastertoescpll.app/contents/mac os/rastertoescpll/failed
Thank You all in advance
Regards
BrianIt is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398 -
ICal Availability Panel Not Working After Installing Yosemite
The availability panel for my corporate calendar no longer works after installing Yosemite. I get a message that says "This calendar does not support availability." This was working before I installed Yosemite. Is there a configuration I need to change?
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer -
Epson rx680 will not print after apple update print driver
I have an Epson RX680 which worked perfectly until I allowed the latest apple update to be installed with newest epson printer driver. It now will not print but comes back with a rasce blah blah error. Tried restoring to the previous software but to no avail.
https://discussions.apple.com/thread/5233149
Maybe you are looking for
-
Relationship user / Business Services
How to associate a business service to a user in Service Manager
-
HT202276 Importing recorded videos of iMovie from iPad mini to mac
I have recorded a whole lot of videos on my iPad mini using the recording feature of iMovie and the problem is these videos are not visible in iPhoto, so my question is, how can i import these videos from my iPad mini to macbook?
-
Cant't find 32-bit option for Mac OSx
I'm running PSD 5 on OSx 10.7. I'm trying to edit a photo and when I try to find the 32-bit option, it's not there. I went to the finder in the Photoshop application for the box to check off 32-bit and it wasn't there. Do I need a specific plugin for
-
Security: showing me online when I am not
Hello, I have a question about security. My husband could see me coming on and offline yesterday but I was not using skype and all my devices I was signed out. I changed the password in case I was logged in somewhere else but this has not solved the
-
Wifi connection freeze after updated to 10.9.1
I have already upgraded my MBPr 15 inches mid 2912 to Mavericks 10.9.1 successfully. And it seems that everything is running fine. However, without known reason, WiFI connection just hang and when I click on the WiFi icon on the Menu bar, it freeze a