My HP5610 office jet no longer scans since upgrading to Mavericks. Help! Any ideas?

Check and see if there is an updated driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=4 41125&

Similar Messages

My Mac has gone really slow since upgrading to Mavericks. Any suggestions as to how to speed things up again?

My Mac has gone really slow since upgrading to Mavericks. Any suggestions as to how to speed things up again?

First, back up all data immediately unless you already have a current backup. If you can't back up, stop here. Do not take any of the steps below.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail | awk '/:/{$4=""; print}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Reset the System Management Controller.
Run Software Update. If there's a firmware update, install it.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Fails to scan since upgrading to Mavericks

early 2008 iMac upgraded to 10.9.4 from Snow Leopard 10.6.8 (20 hrs download time + 1.0 hr installation)
Canon Pixma210 all in one, MP Navigator 1.0
"MP Navigator EX quit unexpectedly" is the Problem Report title that crops up when I attempt to scan now.
I cannot determine if I need to update the drivers or if there is some other software/hardware incompatibility.
Attempts to Reopen from the report dialogue box all fail.
The report has been sent to Apple but I don't know how they handle these issues.
The Canon site says OS 10.9 drivers may be included in OS software or no drivers are available - quite vague.
I attempted a workaround by starting with Leopard (option while restarting to select external drive with Leopard) but I don't have the Canon software installed there and my CD/DVD drive no longer accepts CDs so I can't do an installation now.
From the problem report (I copied the entire report):
Application Specific Information:
" *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[NSImageCell loadingState]: unrecognized selector sent to instance 0xd6c900' "
A translation of what this means and how to fix the problem would be appreciated. Thanks.

You are welcome.
How much RAM do you have installed? I have an early 2008 iMac and Other World Computing has tested the computer so that you can upgrade to 6 GB RAM, which I have done. Made it better than the 4 GB I had.
Other World Computing
Activity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy

My video call icon on facebook chat has disappeared since upgrading to mavericks, any ideas anyone?

Since upgrading to Mavericks about a month ago, my video chat icon has disappeared from Facebook chat - I can't think of any other reason for this problem other than the upgrade to Mavericks. Any ideas anyone?

I'm also dealing with some slowness since moving to Mavericks — but mainly with regard to long lag times with the Finder when I go to rename files, move files, or delete files.
Could it be any of the following? (which came up red)
Startup Items:
          CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
          AltirisAgent: Path: /Library/StartupItems/AltirisAgent
          Jaksta: Path: /Library/StartupItems/Jaksta
          NortonMissedTasks: Path: /Library/StartupItems/NortonMissedTasks
          SymAutoProtect: Path: /Library/StartupItems/SymAutoProtect
          SymProtector: Path: /Library/StartupItems/SymProtector
Kernel Extensions:
          com.Cycling74.driver.Soundflower          (1.6.6)
          com.splashtop.driver.SRXDisplayCard          (1.6 - OS X 10.7.6)
          net.telestream.driver.TelestreamAudio          (1.0.5 - OS X 10.6.10)
          com.splashtop.driver.SRXFrameBufferConnector          (1.6 - OS X 10.7.6)
Problem System Launch Daemons:
          [failed] com.apple.wdhelper.plist

My HP Office Jet Pro L7555 scans but will not save it to a flash drive. Is there a fix for that?

I have a some issues:
1. My HP Office Jet Pro L7555 scans but will not save to a flash drive. (I get error messaqges when I try to download it to my computer) What is the fix for that?
2. Sometimes when I turn it on it will indicate that one of the ink cartridges is empty and upon restartin it all the cartidges show full. What is the fix for that?
3. We have a small network. I can not find the disks that came with the printer. How do I set it up so it saves to one of the computers connected to the network?
Thanks,
PF1

Hi,
Heres a patch for missing scanned images
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-81532-2&cc=us&dlc=en&lc=en&...
Heres the link for the full feature software download
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-79356-3&cc=us&dlc=en&lc=en&...
and use this document for ink related issues
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01628836&tmp_task=solveCategory&cc=us&dlc=en&ju...
Hope this helps..
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display. There is only a blank space that after about 1 minute, has a small box with a question mark. How can I go back to attached images?

Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display. There is only a blank space that after about 1 minute, has a small box with a question mark. Double clicking on the box will open the image in a separate window. It's very slow and tedious for multiple images. How can I go back to attached and displayed images? If I click on "Forward", the images appear instantly in the email to be forwarded.

Scott,
My problem seemed to fix itself. Or, by shutting down the computer one night, instead of putting it to sleep, may have reset something. Since updating to Mavericks, I always (or usually) let the computer sleep overnight or anytime I'm walking away from it. A few days ago, I was updating notes for my kids about how to find all my stuff and how to turn on my computer, so I wanted to rewrite the start-up procedures for the iMac, just in case they ever need to. Well, I shut it down one night so the following morning, I could write down each step. Lo and behold, the images, etc. are all there again! Solved, but I'm not sure why.
Tom

Can no longer print since upgrading modem.

can no longer print since upgrading modem. none of our apple devices see the HP printer anymore. they used to. says no airprint printers found. any thoughts on how to fix?

If you upgraded the modem......but you have not reset the printer back to its original default settings and then set it up again......now would be a good time to do this.
The printer still has the programmed settings to connect to your old modem, and it cannot find it, because it is no longer there. The printer is lost, and does not know how to find its way. It needs to be set up again with new settings to match your new modem.

HT1338 I can no longer AirPrint to my Dell AIO Printer since I upgraded to Mavericks. Any suggestions?

I can no longer AirPrint to my Dell AIO Printer since I upgraded to Mavericks. Any suggestions??

Okay. That is a good result. It proves you have a working network connection between the Mac and the Dell.
So with the printer not showing using Bonjour, you could try adding the printer manually. With Printers & Scanners open, click the plus button to add and then select the IP icon. You can then enter the IP address of the Dell. Set the protocol to HP Jetdirect-Socket. Leave the queue name blank. Change the Name from the IP address to Dell Wireless. Leave the Location blank and in the Use menu, select the model of Dell you have. Then click Add to complete the queue creation and then see if you can print.

I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

Check the Epson web site for updates to drivers and Epson scan software.

Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. the process ends with my mac saying the software is not currently available from the software update server.

Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. I've downloaded the driver software from Canon. My Mac dropbox tells me "the selected printer software is available from Apple", but when I click to download it, the process ends with my mac saying the software is not currently available from the software update server.

Open Finder and click on Go > Go to Folder. Then type
/Library/Printers/Canon
and press Enter. This will show the BJPrinter and iJScanner folders. You could try moving or trashing this folder and then installing the driver that you downloaded from Canon again.

Since upgrading to Mavericks my iMac no longer recognizes my digital camera. iPhoto will open, but my camera never appears in the source list or goes into import mode. Help!

Since upgrading to Mavericks my iMac no longer recognizes my digital camera. iPhoto will open, but my camera never appears in the source list or goes into import mode. Help!

I found that if you open iMage Capture App that seems to trigger iPhoto to open and thew camera is connected. At least that happens with my camera. Good luck.

HT3669 I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

Check the Epson web site for updates to drivers and Epson scan software.

Since upgrading to Mavericks, some spelling errors are no longer corrected

I almost always transpose the word "the" to hte and teh when I type. Spell checker in Pages picks it up and corrects it but not in Mail, only since upgrading to Mavericks a couple weeks ago. I went in to my Library folder and found a Custom dictionary, an "en" dictionary, and a LocalDictionary, all text files with words that I had added over the years. I thought if Mail's spell checker wasn't finding hte and teh, that I must have somehow added them to one of the dictionaries. But neither word appeared any of the three dictionaries. If it did, I would have deleted them. Is there another dictionary in Mavericks that I am missing?
This seems odd since it started only after upgrading to Mavericks. And I have both misspellings included in "Correct spelling automatically" in Language & Region Preferences > Keyboard Preferences > Text > Replace __ With __. I even tried to remove them and then add them back in but it made no difference.

Hello. I too have a Mail spelling issue since Mavericks. My mail has never made any automatic corrections - only suggestions - and I am not sure how to get that going. Anyhow, these days when the speller doesn't recognise a word and I go in and add an accent to that word (alt+e+e), it infuriatingly sends the message immediately without continuing the spellceheck. Any ideas gratefully received.

Cannot Access Disks on Time Capsule Since Upgrading to Mavericks

Hey folks...
So I've had this set up for several years, and it's worked out well. I have a time capsule with an external (self-powered) harddrive connected to it via USB. I usually access it via ethernet as the connection is more speedy than wifi, and my laptop generally remains stationary. For what it's worth, I'm using a Macbook Pro (mid-2010), with the original time capsule (500gb) as well as a connected Western Digital (1tb) external harddrive.
Since upgrading to Mavericks, however, I have not been able to consistently access the remote disks, either by wifi or ethernet connection. The time capsule shows up under my "shared" section of the finder window, but the drives (which are usually visible and accessible from within the time capsule) are not there. Strange enough, when I go into my Airport Utility for Time Capsule preferences, the disks are visible under the "disks" section.
The time capsules' firmware is up to date, as well as the laptop's. I have tried reseting the time capsule as well as my computer in addition to simply unplugging/plugging it back in. I was able to access the disks on a fluke once in the last few days, but after moving the computer away from it's standard spot, the disks are once again no longer accessible.
I had Server 2.0 but am unable to use it since upgrading the OS and haven't purchased Server 3.0. Any suggestions for solutions? Could residule configurations having to do with the Server functionality be affecting it? I'm guessing it is something to do with Mavericks. Thanks for any help or feedback.
Mitchel

I don't have a guaranteed solution to your problem, just some suggestions:
1) Try powering down the Time Capsule for at least 15 minutes, then plug it in again and see if it works better.
2) If you suspect that heat might be a problem, try raising the Time Capsule to give better air flow below it. I have mine on an inverted plastic-coated-wire basket of the type used to organize kitchen drawers.
3) If AirPort Utility can "see" the Time Capsule, you should be able to use the "archive" function (in the Disks panel, Disks tab) to write the disk's contents to a drive connected to the Time Capsule's USB port.
4) In the worst case, you should be able to access the files on the Time Capsule's disk by opening up the Time Capsule, removing the disk drive, mounting the drive in an external enclosure, and attaching the enclosure to your Mac.

Since upgrading to Yosemite on my iMac, My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad... Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..

Since upgrading to Yosemite on my iMac: My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad...
Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..
Thanks

29/11/2014 20:17:01.315 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:17:37.013 com.apple.backupd[616]: Finished scan
29/11/2014 20:17:43.108 com.apple.backupd[616]: Saved event cache at
/Volumes/Time Machine Backups/Backups.backupdb/Geoff Lambrechts’s iMac
(2)/2014-11-29-200648.inProgress/9B453663-603F-40B8-AC21-24F05C724E15/.6162AD34- 38F8-30AB-98E0-4A22FB9D311F.eventdb
29/11/2014 20:17:43.207 com.apple.backupd[616]: Not using file event
preflight for Macintosh HD
29/11/2014 20:18:01.561 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:18:16.288 com.apple.xpc.launchd[1]:
(com.apple.quicklook[715]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.quicklook
29/11/2014 20:18:23.705 com.apple.SecurityServer[56]: Session 100013 created
29/11/2014 20:18:32.046 mdworker[718]: code validation failed in the
process of getting signing information: Error Domain=NSOSStatusErrorDomain
Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
29/11/2014 20:19:01.662 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
29/11/2014 20:19:45.458 com.apple.xpc.launchd[1]:
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The
_DirtyJetsamMemoryLimit key is not available on this platform.
29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
(com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.pubsub.ipc
29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
(com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
launch(3) APIs. Please switch to XPC or bootstrap_check_in():
com.apple.pubsub.notification
29/11/2014 20:20:01.138 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:21:01.484 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:21:13.430 com.apple.backupd[616]: Found 4529 files (1.1 GB)
needing backup
29/11/2014 20:21:18.786 com.apple.backupd[616]: 2.82 GB required (including
padding), 1.24 TB available
29/11/2014 20:21:31.775 Console[734]: Failed to connect (_consoleX) outlet
from (NSApplication) to (ConsoleX): missing setter or instance variable
29/11/2014 20:21:34.230 WindowServer[162]: disable_update_timeout: UI
updates were forcibly disabled by application "Console" for over 1.00
seconds. Server has re-enabled them.
29/11/2014 20:21:36.898 WindowServer[162]: common_reenable_update: UI
updates were finally reenabled by application "Console" after 3.67 seconds
(server forcibly re-enabled them after 1.00 seconds)
29/11/2014 20:21:36.971 coreservicesd[83]: SFLEntryBase::ListHasChanged
mach_msg returned 10000004d
29/11/2014 20:22:01.817 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:23:02.170 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:24:02.547 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:25:02.168 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.233 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.236 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:02.284 CalendarAgent[218]:
[Refusing to parse response
to PROPPATCH because of content-type: .]
29/11/2014 20:25:03.059 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:25:12.674 com.apple.xpc.launchd[1]:
(com.apple.imfoundation.IMRemoteURLConnectionAgent) The
_DirtyJetsamMemoryLimit key is not available on this platform.
29/11/2014 20:26:03.464 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
29/11/2014 20:27:03.841 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
On 29 November 2014 at 19:29, Apple Support Communities Updates <

My HP5610 office jet no longer scans since upgrading to Mavericks. Help! Any ideas?

Similar Messages

Maybe you are looking for