My hplaserjet 3200 printer won't work. Driver disk doesn't work also. help.

I had viruses on my computer, so I cleaned it out and reloaded windows xp3.  But now it's not recognizing my printer, hplaserjet 3200.  The driver disk will not work also.  I tried downloading it online.  I'm getting zip files.  Once i unzip it, it's giving me an error message.  Help.

Hello MimsZ,
Welcome to the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks for your time.
Cheers,  
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

  • Update doesn't work; driver installation doesn't work

    Hello,
    I'm using Windows 7 on a T500, and I have encountered some strange problems, which seem sort of related:
    1. Windows update installation ends with error code 80070670 Windows Update_dt000
    2. My Bluetooth mouse (Logitech V470) required driver installation, but the process ended in failure;
    3. I tried to use Lenovo System Update, but the process took much longer than usual, and didn't finish
    My internet works normally. I scanned the computer for viruses, and there were none. I tried an earlier system restore point, and it didn't make a difference. Does anybody have a suggestion what could be wrong?
    Regards,
    bostjanv

    @JSNL 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Serial number not working, not disk doesn't work (mac copy)

    I've just brought a new Mac Mini installed my Photoshop CS3 onto it. When I opened the application my serial number wouldn't work because I've used it too many times. My last computer crashed, so I can't take Photoshop off it. I followed a tutorial which had two options:
    1. reset the clock on your computer uninstall and re-install.
    2. delete the following folders in /Library/Application Support/Adobe: Adobe PCD, backup and caps. And re-install
    Now when I try to install Photoshop CS3 it doesn't even install! There is a cross instead of a tick next to everything. I've tried repair disk in Disk Utilities, and I was told that there was nothing wrong with the CD.
    Is there a way to fix this?

    Now you are not even able to install the software and gettingthe red cross as soon as enter your serial number.
    hence follow this step:-
    1)  Run the cleaner tool for CS3 , www.adobe.com/support/contact/cscleanertool.html
    2) delete the files ;- /Library/Application Support/Adobe: Adobe PCD, backup and caps
    3) Re-install the software ,
    let us know if the software gets installed ,

  • I need to use an hp 6215 printer with my mac book pro.  the driver installation disk doesn't work.  where can i get a driver that will work?  i use OS X

    i need to use an hp 6215 printer with my mac book pro.  the driver installation disk doesn't work.  where can i get a driver that will work?

    With the Lion it is essentially unnecessary to resort to external driver disks. What's more, most of those disks are incompatible with the OS and should not be used. The system already carries a wide variety of printer description files (aka PPDs, which is what modern printing systems use as "drivers") for a lot of brands. And there was an HP printer update just two days ago.
    Just checked in mine and did indeed find that the HP OfficeJet 6200 Series, with or without Fax, is covered with the latest update.
    So just go thru the motions of creating a proper printer instance:
    Make sure the Mac "sees" the printer on the network.
    System Preferences / Print & Scan
    Click on the + button on the left column
    Select the appropriate type of printer, will use IP for the rest of this
    Select HP Jetdirect - Socket, default for HP network printers
    Type the IP address or look it up
    Name the printer for easy identification on the print dialog
    Let the Mac identify the printer model or manually choose the driver
    Click Add.
    Once the instance pops up in the list, can click on Options & Supplies for further config.

  • Terminal Services - drive redirection doesn't work.

    Hi,
    I have got two Terminal servers on Windows 2012 DataCenter(T1 and T2) + AD on Windows 2012 DataCenter.
    My problem is, that on a terminal T2 drive redirection doesn't work(also printers and clipboard).
    I tried the following things:
    - GPO on AD (Computer Configuration\Policies\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Device and Resource Redirection\Do not allow drive redirection=DISABLE).
    - local GPO on terminal T2 (Computer Configuration\Policies\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Device and Resource Redirection\Do not allow drive redirection=DISABLE).
    - FW is disabled on both terminals.
    - Terminal configuration allows to redirect drives and printers.
    - I tried to login with domain account and local account, on both account redirection doesn't work.
    - System Logs seem to be alright.
    - Of course on the client side I mark redirect local drives.
    Both terminals are the same, both are VM(T2 is a clone of T1).
    Please help...

    Hi,
    Thank you for posting in windows Server Forum.
    Have you check the firewall rules? Please check that ports/ firewall is not blocking the drive to get redirected. For firewall try to disable the firewall and check. You can use below command on the client.
    netsh firewall set opmode mode=disable
    This will eliminate the firewall altogether; assuming you are using Windows firewall. Otherwise, disable any other firewall / blocking software and see how it reacts without firewall. Additionally, go back into RDP and manually "set" those options
    to allows Disk Drive Mapping and Printer pass-through.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • My ipod touch is not syncing, itunes store won't load, and icloud doesn't work!!!!!

    My ipod touch is not syncing, itunes store won't load, and icloud doesn't work!!!!!

    Try the standard fixes:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod

  • I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

    I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

    If you upgraded and were using a version of Acrobat Reader that was legacy, that is PPC compatible, then you will have to upgrade to a version compatible with Lion as Lion no longer has Rosetta to interface with the legacy software.
    I know that Acrobat, full version, 10 works with Lion...use it myself.

  • Why does fcpx suddenly stop reading audio files? ever since i upgraded to Yosemite. Than when I check it on my hard drive it doesn't work as well. Only this file. Am in a trouble of delivering now. Any help?

    why does fcpx suddenly stops reading audio files? ever since i upgraded to Yosemite. Than when I check it on my hard drive it doesn't work as well. Only this file. Am in a trouble of delivering now. Any help?

    Could be systems logs or some other system file growing.
    Use OmniDiskSweeper or DaisyDisk to map what's being used.
    Regards,
    Shawn

  • Nokia Drive + beta "Drive to" doesn't work on Lumi...

    Hi,
    Seems like Nokia Drive + beta doesn't work on my Lumia 920. I'm currently in Macedonia and trying to get directions from one location in Skopje to another always gives me the message: "Sorry , can't find your route. Navigation is not yet available in your country. Please go back."
    I have the Macedonia map downloaded, and I have checked the list of supported countries, where Macedonia does appear. Nokia Maps seems to have no problem finding a route between the same two locations, but Nokia Drive + beta keeps giving me that message.
    http://discussions.nokia.com/t5/Maps-Navigation-an​d-GPS/In-which-countries-can-I-use-navigation-with​... Nokia list here also shows Macedonia is supported.
    Nokia Drive version: 2.1.0.1451, map 8.0.48.113 (info from Nokia Drive + beta about screen)
    Any ideas?

    For me it doesn't work even if the location is only 2.2km away. lol @ fuel company shares
    I wonder if we can get someone in tech support at Nokia to read this. I've tried contacting their support chat but we didn't get far (or anywhere for that matter). I'd like to know whether this issue is known or not, and whether a fix is planned. If it's an isolated case, what can I do to make it right? I'm willing to work with someone in order to get this resolved.

  • My camera is not working. the app doesn't work

    Hi dear, My camera is not working. the app doesn't work: I'can't open the app either. It only works using skype, facing me. On the correct side is frozen. tks, bye, Federica

    Have you tried force quitting the Camera app? http://support.apple.com/kb/ht5137
    If that fails:
    Try doing a hard reset: Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears. If that doesn't solve the issue, you could also try backing up the device and restoring the device as new. If that doesn't solve the issue, the device may need service.
    Follow the steps in: http://support.apple.com/kb/HT4137
    NB: set up as a NEW device because a software issue will be in the backup. If the issue persists after restoring as new, you should offer the device for service.
    If you're not able to restore the device, this one might help: http://support.apple.com/kb/HT1808
    Good luck

  • Upload working fine, download doesn't work

    Upload working fine, download doesn't work on my PC

    Sign in at OVI from a PC or laptop and Reinstall Ovi Store on your device.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • .jar includes jdbc driver but doesn't work

    Hi
    I'm quite new with Java. I've just created my first app in java, it's some kind of CMS. I have to give to my friend who can only install JVM and I can't set up his computer, because he lives in other city. What's the problem then:
    I tried to compile (build) complete file with jdbc driver. And actually I've done it (when I open jar with winrar I see that mysql-connector.jar is there) but it's not working. I still have error:
    SQLException: com.mysql.jdbc.Driver
    No suitable driver
    08001
    It works fine when I'm running it with NetBeans, but built jar doesn't work at all.
    Please help me with this problem. I was searching in many forums for the same problem, but no one had it (I mean EXACTLY the same). I have had many problems already with adding connector to NetBeans project at the beginning, but finally I've done it after 2 days - reinstallation of NB solved the problem. Is it possible that's NB fault again?
    Thx for any clues
    Michael

    Hello,
    Try to include a Class-Path option in the Manifest of your jar and see if that works.
    Hope this helps

  • Keyboard Driver Filter doesn't work in 6.0.2

    We're aware that the NI Keyboard Driver Filter may cause the computer to hang in the middle of shutdown (Windows XP) if a USB keyboard is used, so we substituted a PS-2 keyboard.  This worked fine.
    Then, when we updated Lookout 6.0.1 to 6.0.2, making sure that the Keyboard Driver Filter was installed, we found that the Keyboard Driver Filter did not work.  It was still possible for a user with a lower priority to reach the Task Manager by pressing Ctrl-Alt-Del.
    We need to protect Lookout from being accidentally closed by users "playing" with the keyboard.
    How do we get this function back?

    I got something from R&D. The keyboard filter in Lookout 6.0.2 has some bugs, which cause it not to work and also some other unexpected problems. That means the filter in 6.0.2 doesn't work at all.
    You'd better uninstall the whole Lookout 6.0.2 and then install it again without keyboard filter. After that, you need to install the keyboard filter shipped with DSC 8.0.1, which has fixed those bugs. See the attachment.
    Sorry for inconvenience.
    Ryan Shi
    National Instruments
    Attachments:
    LVDSC.kbFilter.zip ‏307 KB

  • AirPort Disk doesn't work with LaCie Mini Hub & Hard Drive

    I got my new La Cie Mini Hub and Hard Drive yesterday, backed up the PB and did a reinstall...no problems.
    This morning, I hooked my LC into my AEBS went through the setup in AP Utility which saw the drive with no problems. But the AP Drive Utility doesn't see the drive. My AP firmware has been updated, and the software too. I even went through the setup in this posting:
    http://discussions.apple.com/thread.jspa?messageID=4230118&#4230118
    Any ideas that I may have missed?

    I am dealing with the same issue, jeppeo. I have a 320 GB Seagate external HD (with both USB and Firewire). The Airport Disk Utility does not recognize the drive. It does, however, recognize my Kingston 1GB USB stick. Thus, I know the system works, it just doesn't seem to be working with the Seagate. It may be that the Seagate, and the LaCie you are using, are simply incompatible with the AEBSN. If that is the case, the only option might be to purchase a drive that is known to be compatible with the AEBSN, or any other drive and simply try plugging it in. I am considering buying a Western Digital drive (as many of their models seem to be compatible) and then testing it out. If it doesn't work, I will return it.
    Edit: Fixed spelling
    Message was edited by: babyachilles

  • Install disk doesn't work with Windows Vista

    I just bought a new HP Color LaserJet Pro MFP M277dw and the install disk isn't compatible with Windows Vista.  Apparently there's no ful feature option for Windows Vista on an HP laptop.  After several hours of work I downloaded several drivers and got the printer to print, but the scan function doesn't work that well without the HP software which hasn't been created for Windows Vista.

    I am having a very similar problem but do not have an answer either.  I am running an X61 Type 7676A12 with a Lenovo ACP50 port replicator FRU part number 40Y8160.  I am running Windows XP Pro.  The port replicator has never been very great and would not restore the external monitor picture properly when the laptop had been in sleep mode however it was serviceable if not optimal.  After downloading and installing the October MS security updates the machine would get a BSOD when the port replicator was plugged in.  Remove the replicator and reboot and it worked ok.  Plug it in again and BSOD.  I tried upgrading the drivers from 5.1.4a to 7.1.1.03Aug07 and then to 7.1.2.  No go.  Emailing Targus with the problem got no response.  The port replicator is now relegated to my junk heap of useless rubbish.

Maybe you are looking for