My html table is not showing on the 2nd tab panel (muse widget)

The same table works just fine on the first tab however when I try to click on the second table in browser mode or preview page on browser, my table does not show up. Any tips for fixing this issue?

If I get this right, you're using the Tabbed panel widget to display a HTML table in each of the tabs. If that is the case, please make sure you insert the HTML content on each the tab's content area respectively. In order to verify this, switch between the tabs in Design mode to check your content.
Thanks,
Vinayak

Similar Messages

My html code is only working on the 1st tab panel (muse widget)

I have some html code with javascript which calculates total marks. I inserted this in the first tab and my code works fine, but when i insert it in the second, third and so on it stops working completely(including the 1st tab). Is there something i am doing wrong or is this not possible?

Hi
If the custom code you are using is in conflict with Muse code or if its breaking page workflow then it can be an issue as the page elements will not work.
Please verify the code used and modify accordingly.
Thanks,
Sanjit

Why tables do not show on the tree?

Why do, though not regularly but often enough, tables branch is missing on newly opened connection? 2nd version of SQL Developer never had that “feature”. Sometimes close/start helps, sometimes not. Often closing, launching and closing SQL Developer 2, and restarting 3rd may help too.
All databases I connect to are either 10.2.0.3+ or 11.2.0.2 EE, or 10XE.
The problem, if appeared, is there for any connection in list, so it is rather a general thing not depending on the other end.
I even haven't been able to figure out on what conditions that happens, it seems to be random - although if it have happened once then there's high enough probability it'd be still here on next launch - unless 2nd version is started and closed before 3rd one's restart, however even this not always helps.
Oracle SQL Developer 3.0.04
Version 3.0.04
Build MAIN-04.34
Copyright © 2005, 2011 Oracle. All Rights Reserved.
IDE Version: 11.1.1.4.37.59.31
Product ID: oracle.sqldeveloper
Product Version: 11.1.2.04.34
Version
Component     Version
=========     =======
CVS Version     Internal to Oracle SQL Developer (client-only)
Java(TM) Platform     1.6.0_11
Oracle IDE     3.0.04.34
Versioning Support     3.0.04.34
TIA

Thanks for all who responded.
I check for updates frequently and apply as soon as they are offered. That does not help, however. Disappearance of tales on the object class selection tree happens now and then, no matter what I try to do.
It's Windows (XP) where there's the problem. I haven't noticed that on Linux. However, I have to use it on Windows because of several reasons anybody could guess, and it's not only me. I have to help and to support a number of customers needing the tool although not having Oracle knowledge as their primary skill (and still being programmers or testers). I often advise them to roll back to SQL Developer 2, altogether that actually isn’t a solution, moreover since they aren’t fixed in the project – somebody goes and somebody comes, that sort of things.
Edited by: Uldis Pavuls on Nov 9, 2011 5:51 PM

HT201272 I have purchased some apps but they are not showing in the purchase tab, have updated it as well. Have receipt for these purchase, will I be recharged if I try & download from app store again

I have purchased apps recently which are not showing against my purchases. If I went into app again & downloaded them will I be recharged. I have a receipt for the purchases?

iTunes Store: Hiding and unhiding purchases
http://support.apple.com/kb/HT4919

RowInconsistentException does not show for the 2nd time

Hi,
I have a simple page with a few input fields and a save button.
The input fields are derived from a ViewObject based on a single Entity Object.
I open the page in two browsers. I follow the below steps:
1) make changes in first browser
2) make change in second browser
3) save changes in first browser - it is successful
4) click on save on second browser - a RowInconsistentException is thrown
5) click on save again in the second browser - the changes gets saved, I was expecting the exception to be thrown again, but it is not thrown.
I tried debugging it by printing the posted attributes (Entitiy.getPosetdAttribute()) before saving.
On step-4 the posted attributes are different then the ones in DB, so the exception is thrown, that is fine.
But on step-5 the posted attributes are same as the ones in the DB, (it looks like they are updated from the DB again on step-4) and the exception is not thrown.
But in my page I want the save in step-5 to fail so that the user has to requery the page. How can I do that?
Any Idea!!
Thanks,
Anil

If you want to keep getting the JBO-25014 and not refresh the values from the database:
boolean[] attributeChanges;int numberOfAttributes;
public void lock() {
Object[] currValues = saveCurrentValues();
try {        super.lock();    }
catch (RowInconsistentException e) {        revert();        resetCurrentValues(currValues);        throw(e);    }}
private Object[] saveCurrentValues() {
attributeChanges = new boolean[getAttributeCount()];    numberOfAttributes = getAttributeCount();    // Save the current values of the attributes (so that we can restore them later)
Object[] currValues = new Object[numberOfAttributes];
for (int i=0; i<numberOfAttributes; i++) {
currValues[i] = getAttribute(i);        attributeChanges[i] = isAttributeChanged(i);    }    return currValues;}
private void resetCurrentValues(Object[] currValues) {
for (int i=0; i<numberOfAttributes; i++) {         // Set the EO instance with the saved values                   System.out.println("Attr["+ i + "] :" +currValues[i]);
if (attributeChanges[i]) {
populateAttributeAsChanged(i, currValues[i]);         }
else {
populateAttribute(i, currValues[i]);         }    }}
Sorry about the formatting. The new forum mess everything up
Timo

HT203167 My purchase music from iTunes is missing tracks. missing tracks are not showing in the purchased tab in iTunes

I cannot recover My itnes purchased music from the recovery section. more than half the tracks are missing in the Camilo sesto 20 exitos.

I have the same problem - they AREN'T hidden. They aren't visible on computer, iPad or iPhone with match on. Obviously something screwed in the purchase history. Even if I have backups they will count against the 25,000 track limit for iTunes in the cloud - which is a bit of an issue as I have 24,997 non-purchased track already.
A bit of an issue for someone who's bought a lot from iTunes over the years - and not helped by being unable to get an answer from support. Oddly if I switch match off a few of them become available.
Any suggestions - apart from contact support (I'm still waiting) - appreciated

Why pictures are not showing in the develope tab

I get a big blue box w a white X

Hi Sherrie,
This is a GPU related issue. Please update your GPU drivers from the manufacturers website.
In the mean while, disabling "Use Graphics Processor" (Preferences > Performance), should help load the Develop module.
For more details, Adobe Photoshop Lightroom Help | Lightroom GPU FAQ
Similar post, Lightroom CC - blue box in develop module
~ Arpit

ALV not showing all the rows! Please help!

Hi Experts,
     I have webdynpro ALV report and I am using SALV_WD_TABLE as the reusable component. In component controller's WDDOINIT I have written the code for pulling teh data from R/3 table and binding it to ALV table.
In the view's WDDOMODIFYVIEW event I have written the following code to get subtotal and grand total of Qty column based on product column.
      I have coded like this:
      lr_field_settings ?= l_value.
lr_field = lr_field_settings->get_field( 'PRODUCT' ).
lr_field->if_salv_wd_sort~set_group_aggregation_allowed( ABAP_TRUE ).
lr_field->if_salv_wd_sort~create_sort_rule( ).
l_sortrule = lr_field->if_salv_wd_sort~GET_SORT_RULE( ).
l_sortrule->set_sort_order( if_salv_wd_c_sort=>sort_order_ascending ).
l_sortrule->set_group_aggregation( ABAP_TRUE ).
*...Aggregate Field PRODUCT
lr_field = lr_field_settings->get_field( 'QTY' ).
lr_field->if_salv_wd_aggr~create_aggr_rule( ).
lr_aggr_rule = lr_field->if_salv_wd_aggr~get_aggr_rule( ).
lr_aggr_rule->set_aggregation_type( if_salv_wd_c_aggregation=>aggrtype_total ).
It is working now but my ALV table is not showing all the rows. I have 6 products and it is showing from product 2. But it is calculating grand total and subtotal correctly. I am not able to see the first product row and subtotal for that. Even if I click on the ^ icon in the ALV table below it is not showing all the rows.
What could be the problem?
Please help
Thanks
Gopal

did you somehow manage to set the "first visible row" property on table object
to 2.   Only thing I can think of that could cause this effect.
Cheers
Phil

Af:table is not showing records until doing refresh of the view object iter

Hi Experts,
I am using JDeveloper 11.1.1.4 and i have a page whhich shows records of a particular read only view object as an af:table. When i run the page at first it is not showing any data at all . But there are 2 records when i run the query of that read only view object.In my page there is a link called "Refresh" which calls the "Execute" operation of the view iterator of my view object. When i click this link the table shows two records.Why the table does not show records once wehn the page is rendered?
Please help me.

The following is the code that shows the panel collection in my page.
<af:panelCollection id="pc1" featuresOff="freeze, wrap"styleClass="NewStyle">
<f:facet name="secondaryToolbar">
<af:toolbar id="t1" styleClass="Secondary">
*<af:query id="qryId1" headerText="Search" disclosed="false"*
*value="#{bindings.salesInvoiceAuthorisationCriteriaWaitOnlyQuery.queryDescriptor}"*
*model="#{bindings.salesInvoiceAuthorisationCriteriaWaitOnlyQuery.queryModel}"*
*queryListener="#{criteria.processQueryForSalesInvoice}"*
*queryOperationListener="#{bindings.salesInvoiceAuthorisationCriteriaWaitOnlyQuery.processQueryOperation}"*
*displayMode="compact"*
*saveQueryMode="readOnly" maxColumns="2"*
*modeChangeVisible="false" styleClass="Minimal"*
*conjunctionReadOnly="true"*
*resultComponentId="::t2"/>*
</af:toolbar>
</f:facet>
<af:table value="#{bindings.salesInvoiceAuthorisation1.collectionModel}"
var="row"
rows="#{bindings.salesInvoiceAuthorisation1.rangeSize}"
emptyText="#{bindings.salesInvoiceAuthorisation1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.salesInvoiceAuthorisation1.rangeSize}"
rowBandingInterval="0"
filterModel="#{bindings.salesInvoiceAuthorisation1Query.queryDescriptor}"
queryListener="#{bindings.salesInvoiceAuthorisation1Query.processQuery}"
filterVisible="true" varStatus="vs"
selectedRowKeys="#{bindings.salesInvoiceAuthorisation1.collectionModel.selectedRow}"
selectionListener="#{bindings.salesInvoiceAuthorisation1.collectionModel.makeCurrent}"
rowSelection="none" id="t2"
columnStretching="column:accountNameColumn"
binding="#{processDocuments.invoiceTable}"
contentDelivery="immediate"
partialTriggers="::c111 selectToPost ::qryId1"
styleClass="newTableStyle" autoHeightRows="9">
<af:column filterable="false" sortable="false"
headerText="#{bindings.DocumentAuthorisationView1.hints.ToPost.label}"
id="c18" align="center"
styleClass="#{row.bindings.ToPost.inputValue ? 'RowSelected' : ''}"
width="103">
<af:selectBooleanCheckbox id="selectToPost"
value="#{row.bindings.ToPost.inputValue}"
autoSubmit="true"/>
</af:column>
<af:column sortProperty="DocumentName" filterable="true"
sortable="true"
headerText="#{bindings.salesInvoiceAuthorisation1.hints.DocumentName.label}"
id="c11"
styleClass="#{row.bindings.ToPost.inputValue ? 'RowSelected' : ''}"
width="107" filterFeatures="caseInsensitive">
<af:outputText value="#{row.DocumentName}" id="ot1"/>
</af:column>
<af:column sortProperty="ExternalReference" filterable="true"
sortable="true"
headerText="#{bindings.salesInvoiceAuthorisation1.hints.ExternalReference.label}"
id="c10"
styleClass="#{row.bindings.ToPost.inputValue ? 'RowSelected' : ''}"
width="105" filterFeatures="caseInsensitive">
<af:outputText value="#{row.ExternalReference}" id="ot8"/>
</af:column>
<af:column sortProperty="DocumentCategory" filterable="true"
sortable="true"
headerText="#{bindings.salesInvoiceAuthorisation1.hints.DocumentCategory.label}"
id="c9"
styleClass="#{row.bindings.ToPost.inputValue ? 'RowSelected' : ''}"
width="105" filterFeatures="caseInsensitive">
<af:outputText value="#{row.DocumentCategory}" id="ot11"/>
</af:column>
<af:column sortProperty="CrDr" filterable="true"
sortable="true"
headerText="#{bindings.salesInvoiceAuthorisation1.hints.CrDr.label}"
id="c4"
styleClass="#{row.bindings.ToPost.inputValue ? 'RowSelected' : ''}"
width="52" align="right">
<af:outputText value="#{row.CrDr}" id="ot9">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.salesInvoiceAuthorisation1.hints.CrDr.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="BaseDate" filterable="true"
sortable="true"
headerText="#{bindings.salesInvoiceAuthorisation1.hints.BaseDate.label}"
id="c8"
styleClass="#{row.bindings.ToPost.inputValue ? 'RowSelected' : ''}">
<f:facet name="filter">
<af:inputDate value="#{vs.filterCriteria.BaseDate}"
id="id1" contentStyle="text-transform:uppercase;">
<af:convertDateTime pattern="#{bindings.salesInvoiceAuthorisation1.hints.BaseDate.format}"/>
</af:inputDate>
</f:facet>
<af:inputDate value="#{row.BaseDate}" id="ot6" contentStyle="text-transform:uppercase;">
<af:convertDateTime pattern="#{bindings.salesInvoiceAuthorisation1.hints.BaseDate.format}"/>
</af:inputDate>
</af:column>
<af:column sortProperty="ExternalAccountCode"
filterable="true" sortable="true"
headerText="#{bindings.salesInvoiceAuthorisation1.hints.ExternalAccountCode.label}"
id="c6"
styleClass="#{row.bindings.ToPost.inputValue ? 'RowSelected' : ''}"
filterFeatures="caseInsensitive" visible="false">
<af:outputText value="#{row.ExternalAccountCode}" id="ot3"/>
</af:column>
<af:column sortProperty="AccountName" filterable="true"
sortable="true"
headerText="#{bindings.salesInvoiceAuthorisation1.hints.AccountName.label}"
id="accountNameColumn"
styleClass="#{row.bindings.ToPost.inputValue ? 'RowSelected' : ''}"
filterFeatures="caseInsensitive">
<af:outputText value="#{row.AccountName}" id="ot4"/>
</af:column>
</af:table>
</af:panelCollection>
Edited by: Priya on Nov 22, 2011 12:22 AM

Itunes it's not showing me the last date/time the iPhone/iPad was backed up.

I just backed up my iPhone and iPad but iTunes it's not showing me the last date/time my device was backed up. I had just done a backup about 3 hours ago. And when I go to check the backup location I see a folder there with the time it was last backed up. But it's not showing me the backup date in iTunes. I don't know what to do.
I already tried to remove the folder in App. Support-Mobile Sync and start a brand new backup. But no date.
Tried to delete and start a new iTunes folder in Music but nothing has changed
Any solution is welcome!

iCloud requires OS X Lion (10.7.2) or higher. You will need to upgrade to either Lion higher in order to set up iCloud on your Mac. First check to see if your system meets the system requirements to upgrade.
Lion system requirements are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Mountain Lion requirements are shown here: http://support.apple.com/kb/HT5444.
Mavericks requirements are shown here: http://support.apple.com/kb/HT5842.
If you can run Mavericks, you can purchase an upgrade from the Mac App Store. If you can only run Lion or Mountain Lion, contact the online store in your country and purchase a redemption code to download it from the Mac App Store.
After upgrading, you will find iCloud in System Preferences>iCloud on your Mac, and can set it up as explained here: http://www.apple.com/icloud/setup/mac.html.
Before upgrading, you may want to check the compatibility of your existing programs by checking here: http://roaringapps.com/apps:table.

SE14 Status-UPGRADE-Table does not exist in the database

Folks,
I have created a ztable with SPRAS and few Char fields and generated a table maintenance generator.In the Dev it is working fine but when I moved the TR to Q TR ended up with errrors "Generation of Programs and Screens".When I check in Q in SE11 I am able to see the table but with an error message "Table doesn't exist in the database".
SE14 Status for this table is getting shown as UPGRADE in Q.
Can anyone here throw some light on what exactly this status UPGRADE means and how it gets set in SE14.
In DEV,I had checked the DATABASE OBJECT>>CHECK>DISPLAY and RUNTIME OBJECT>>CHECK>>DISPLAY and it is showing Database object is consistent but where as the same in Q is showing "Table is not created in the Database".
K.Kiran.

Hi.
Is Q system is newly copied? Also please check the transport order of the table creation request. Also check whether pwd of the DB user is locked?
Regards,
Vimal

All value not showing at the time of J1INCHLC - Create Remittance Challan

Hi,
I am facing following problem in TCS
I am trying to process TCS Remittance Challan with T.code J1INCHLC, but all document No. not showing at the time of challan process, I checked entry in TCS GL, Table BSEG & WITH_ITEM all document showing properly. Section code also showing in line item.
I checked some document process with same material & same customer. But only few entries showing at the time of TCS Remittance Challan process. I also compare both entries which is showing & un-showing but no difference found.
Kindly suggest solution to resolve the issue.
Sunil

Hi Sunil
If the entires are there in WITH_ITEM and with Section codes, then it should appear in J1INCHLC. Please check other things like the date ranges you are entering in J1INCHLC. Also try by putting the document number which is missing instead of posting date range and fine out whether is it appearing. If you are able to get it, then you would be in a position to find out why it is not appearing.
Regards
Prasanna

Payroll cheques posted to GL in PCP0 but not showing on the cheque register (FCHN)

Our Finance is trying to find out what happened with a few Payroll cheques from early 2013. We can see that they were posted to GL 100300 in PCP0, but the cheques are not showing on the cheque register (FCHN).
Does anybody have any ideas to help mefind out where they went or what happened? Would appreciate any advice.

Hi Tatiana,
Possibly that print check program was never run for the employees using transaction PC00_M10_FFOC.
Please note that you will need a check lot and banking configuration set-up done for this transaction to run successfully.
Table REGUH stores information about your pre-dme for each of employee for run number and run identification.
You will need to check table PAYR and see if the employees have entry in it and if they have then if they have check number or not.
Table PAYR is read by check register to find employees' check numbers.
Hope this helps.
If you see check numbers in table PAYR for employee, please verify if you have entered correct selection on selection screen for check register importantly the check box for Payroll Checks is checked.
Also, if possible please send across screenshot of your selection screen.
Thanks,
Ameet

The approver does not show in the approval preview after saving sh. cart

Hi ,
I would appreciate if anyone can reply me for fixing the problem.
Problem: The approver does not show in the approval preview after the shopping cart is saved, however before saving the shopping cart it shows the approver in the approval preview. We are using two workflows: WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
Details of the problem:
The following steps specify the problem in detail , it is applicable for both the workflows WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
1.     Shopping created
2.     The approval preview shows the approver ( please see #1 in the attached document) before saving the shopping cart.
3.     Shopping cart is saved.
4.     After saving , Check status transaction shows the shopping cart in status awaiting approval
5.     The section approval shows No workflow started , application error occurred
6.     T.Code SWI1 shows the workitem created for the shopping cart but in error.
7.     The work item container does not show any agents
I would appreciate it anyone can reply as to how to fix it ASAP.
Best Regards
Pawan

Hi Disha,
I have synchronised through SWU_OBUF several times since yesterday , but still at the same place.
In the workflow customising - The only red entry which I have is for check entries from HR control tables under Mainiatin definition env. and Mainiatin guded procedure for gateway under guided procedure (new in SRM 5.0) .The verification workflow works fine . Also I think these entries will not impact the workflow functionalhese were red even in my earlier system .
SLG1 shows all green entries and there are no entries in RZ20.
I have specified task TS10008126 as general task as I want anyone who is identified by SLAapprover should be able to process the workitem and as per documentation I can specify this task as standard task.
What should I do.. , anything am I missing .
Thanks and Best Regards
Pawan

JTable Problem (table does not show rows and columns)

Hi All,
What the table is suppose to do.
- Load information from a database
- put all the values in the first column
- in the second column put combobox (cell editor with numbers 1-12)
- the 3rd column put another combobox for something else
- the 4th column uses checkbox as an edit
The number of rows of the table should be equal to the number of
record from
the database. If not given it default to 20 (poor but ok for this)
The number of columns is 4.
But the table does not show any rows or
column when I put it inside a
JScrollPane (Otherwise it works).
Please help,
thanks in advance.
public class SubjectTable extends JTable {
* Comment for <code>serialVersionUID</code>
private static final long serialVersionUID = 1L;
/** combo for the list of classes */
protected JComboBox classCombo;
/** combo for the list of subjects */
protected JComboBox subjectsCombo;
/** combo for the list of grade */
protected JComboBox gradeCombo;
boolean canResize = false;
boolean canReorder = false;
boolean canSelectRow = false;
boolean canSelectCell = true;
boolean canSelectColumn = true;
// the row height of the table
int rowHeight = 22;
// the height of the table
int height = 200;
// the width of the table
int width = 300;
// the size of the table
Dimension size;
* Parameterless constructor. Class the one of the other constructors
to
* create a table with the a new <code>SubjectTableModel</code>.
public SubjectTable() {
this(new SubjectTableModel());
* Copy constructor to create the table with the given
* <code>SubjectTableModel</code>
* @param tableModel -
* the <code>SubjectTableModel</code> with which to
initialise
* the table.
SubjectTable(SubjectTableModel tableModel) {
setModel(tableModel);
setupTable();
* Function to setup the table's functionality
private void setupTable() {
clear();
// set the row hieght
this.setRowHeight(this.rowHeight);
// set the font size to 12
//TODO this.setFont(Settings.getDefaultFont());
// disble reordering of columns
this.getTableHeader().setReorderingAllowed(this.canReorder);
// disble resing of columns
this.getTableHeader().setResizingAllowed(this.canResize);
// enable the horizontal scrollbar
this.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
// disable row selection
setRowSelectionAllowed(this.canSelectRow);
// disable column selection
setColumnSelectionAllowed(this.canSelectColumn);
// enable cell selection
setCellSelectionEnabled(this.canSelectCell);
setPreferredScrollableViewportSize(getSize());
TableColumn columns = null;
int cols = getColumnCount();
for (int col = 0; col < cols; col++) {
columns = getColumnModel().getColumn(col);
switch (col) {
case 0:// subject name column
columns.setPreferredWidth(130);
break;
case 1:// grade column
columns.setPreferredWidth(60);
break;
case 2:// class room column
columns.setPreferredWidth(120);
break;
case 3:// select column
columns.setPreferredWidth(65);
break;
} // end switch
}// end for
// set up the cell editors
doGradeColumn();
doClassColumn();
//doSubjectColumn();
* Function to clear the table selection. This selection is different
to
* <code>javax.swing.JTable#clearSelection()</code>. It clears the
user
* input
public void clear() {
for (int row = 0; row < getRowCount(); row++) {
for (int col = 0; col < getColumnCount(); col++) {
if (getColumnName(getColumnCount() - 1).equals("Select")) {
setValueAt(new Boolean(false), row, getColumnCount() - 1);
}// if
}// for col
}// for row
* Function to set the cell renderer for the subjects column. It uses
a
* combobox as a cell editor in the teacher's subjects table.
public void doSubjectColumn() {
TableColumn nameColumn = getColumnModel().getColumn(0);
nameColumn.setCellEditor(new DefaultCellEditor(getSubjectsCombo()));
// set up the celll renderer
DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
renderer.setToolTipText("Click for drop down list");
nameColumn.setCellRenderer(renderer);
// Set up tool tip for the sport column header.
TableCellRenderer headerRenderer = nameColumn.getHeaderRenderer();
if (headerRenderer instanceof DefaultTableCellRenderer) {
((DefaultTableCellRenderer) headerRenderer)
.setToolTipText("Click the Name to see a list of choices");
}// end doSubjectsColumn----------------------------------------------
/** Function to set up the grade combo box. */
public void doGradeColumn() {
TableColumn gradeColumn = getColumnModel().getColumn(1);
gradeColumn.setCellEditor(new DefaultCellEditor(getGradeCombo()));
DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
renderer.setToolTipText("Click for drop down list");
gradeColumn.setCellRenderer(renderer);
// Set up tool tip for the sport column header.
TableCellRenderer headerRenderer = gradeColumn.getHeaderRenderer();
if (headerRenderer instanceof DefaultTableCellRenderer) {
((DefaultTableCellRenderer) headerRenderer)
.setToolTipText("Click the Grade to see a list of choices");
}// end doGradeColumn-------------------------------------------------
* Function to setup the Class room Column of the subjects
public void doClassColumn() {
// set the column for the classroom
TableColumn classColumn = getColumnModel().getColumn(2);
classColumn.setCellEditor(new DefaultCellEditor(getClassCombo()));
DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
renderer.setToolTipText("Click for drop down list");
classColumn.setCellRenderer(renderer);
// Set up tool tip for the sport column header.
TableCellRenderer headerRenderer = classColumn.getHeaderRenderer();
if (headerRenderer instanceof DefaultTableCellRenderer) {
((DefaultTableCellRenderer) headerRenderer)
.setToolTipText("Click the Class to see a list of choices");
}// end doClassColumn--------------------------------------------------
* Function to get the size of the table
* @return Returns the size.
public Dimension getSize() {
if (this.size == null) {
this.size = new Dimension(this.height, this.width);
return this.size;
* Function to set the size of the table
* @param dim
* The size to set.
public void setSize(Dimension dim) {
if (dim != null) {
this.size = dim;
return;
* Function to create/setup the class room comboBox. If the comboBox
is
* <code>null</code> a nwew one is created else the functon returns
the
* function that was returned initially.
* @return Returns the classCombo.
private JComboBox getClassCombo() {
if (this.classCombo == null) {
this.classCombo = new JComboBox();
// fill up the class name combo
ArrayList classRooms = new ArrayList();
try {
//TODO classRooms = Settings.getDatabase().getClassRooms();
for (int i = 0; i < 10; i++) {
String string = new String("Class");
string += i;
if (!classRooms.isEmpty()) {
classRooms.trimToSize();
for (int i = 0; i < classRooms.size(); i++) {
this.classCombo.addItem(classRooms.get(i));
} catch (Exception e) {
e.printStackTrace();
return this.classCombo;
* Function to create/setup the subjects comboBox. If the comboBox is
* <code>null</code> a nwew one is created else the functon returns
the
* function that was returned initially.
* @return Returns the subjectsCombo.
private JComboBox getSubjectsCombo() {
if (this.subjectsCombo == null) {
this.subjectsCombo = new JComboBox();
try {
ArrayList subjects = loadSubjectsFromDatabase();
if (!subjects.isEmpty()) {
Iterator iterator = subjects.iterator();
while (iterator.hasNext()) {
// create a new subject instance
//TODO Subject subct = new Subject();
// typecast to subject
//TODO subct = (Subject) iterator.next();
String name = (String) iterator.next();
// add this subject to the comboBox
//TODO this.subjectsCombo.addItem(subct.getName());
subjectsCombo.addItem(name);
}// end while
}// end if
else {
JOptionPane.showMessageDialog(SubjectTable.this,
"Subjects List Could Not Be Filled");
System.out.println("Subjects List Could Not Be Filled");
} catch (Exception e) {
e.printStackTrace();
return this.subjectsCombo;
* Function to load subjects from the <code>Database</code>
* @return Returns the subjects.
private ArrayList loadSubjectsFromDatabase() {
// list of all the subject that the school does
ArrayList subjects = new ArrayList();
try {
//TODO to be removed later on
for (int i = 0; i < 10; i++) {
String string = new String("Subject");
string += i;
subjects.add(i, string);
// set the school subjects
//TODO subjects = Settings.getDatabase().loadAllSubjects();
} catch (Exception e1) {
e1.printStackTrace();
return subjects;
* Function to create/setup the grade comboBox. If the comboBox is
* <code>null</code> a nwew one is created else the functon returns
the
* function that was returned initially.
* @return Returns the gradeCombo.
private JComboBox getGradeCombo() {
if (this.gradeCombo == null) {
this.gradeCombo = new JComboBox();
// fill with grade 1 to 12
for (int i = 12; i > 0; i--) {
this.gradeCombo.addItem(new Integer(i).toString());
return this.gradeCombo;
public static void main(String[] args) {
try {
UIManager.setLookAndFeel(new Plastic3DLookAndFeel());
System.out.println("Look and Feel has been set");
} catch (UnsupportedLookAndFeelException e) {
// TODO Auto-generated catch block
e.printStackTrace();
SubjectTableModel model = new SubjectTableModel();
int cols = model.getColumnCount();
int rows = model.getRowCount();
Object[][] subjects = new Object[rows][cols];
for (int row = 0; row < rows; row++) {
subjects[row][0] = new String("Subjectv ") + row;
}//for
model.setSubjectsList(subjects);
SubjectTable ttest = new SubjectTable(model);
JFrame frame = new JFrame("::Table Example");
JScrollPane scrollPane = new JScrollPane();
scrollPane.setViewportView(ttest);
frame.getContentPane().add(scrollPane);
frame.pack();
frame.setVisible(true);
**************************************END
TABLE******************************
----------------------------THE TABLE
MODEL----------------------------------
* Created on 2005/03/21
* SubjectTableModel
package com.school.academic.ui;
import javax.swing.table.AbstractTableModel;
* Class extending the <code>AbstractTableModel</code> for use in
creating the
* <code>Subject</code>s table. In addition to the implemented methods
of
* <code>AbstractTableModel</code> The class creates a model that has
initial
* values - the values have their own <code>getter</code> and
* <code>setter</code> methods - but can still be used for values that
a user
* chooses.
* <p>
* @author Khusta
public class SubjectTableModel extends AbstractTableModel {
* Comment for <code>serialVersionUID</code>
private static final long serialVersionUID = 3257850978324461113L;
/** Column names for the subjects table */
String[] columnNames = { "Subject", "Grade", "Class Room",
"Select" };
/** Array of objects for the subjects table */
Object[][] subjectsList;
private int totalRows = 20;
protected int notEditable = 0;
* Parameterless constructor.
public SubjectTableModel() {
// TODO initialise the list
// add column to the default table model
this.subjectsList = new
Object[getTotalRows()][getColumnNames().length];
* Copy constructor with the <code>subjectList</code> to set
* @param subjects
public SubjectTableModel(Object[][] subjects) {
this(0, null, subjects, 0);
* Copy constructor with the initial number of row for the model
* @param rows -
* the initial rows of the model
* @param cols -
* the initial columns of the model
* @param subjects -
* the initial subjects for the model
* @param edit - the minimum number of columns that must be
uneditable
public SubjectTableModel(int rows, String[] cols, Object[][]
subjects, int edit) {
// set the initial rows
setTotalRows(rows);
// set the column names
setColumnNames(cols);
// set the subjectlist
setSubjectsList(subjects);
//set not editable index
setNotEditable(edit);
* Function to get the total number of columns in the table
* @return int -- the columns in the table
public int getColumnCount() {
if (this.subjectsList == null) {
return 0;
return getColumnNames().length;
* Function to get the total number of rows in the table
* @return int -- the rows in the table
public int getRowCount() {
if (this.subjectsList == null) {
return 0;
return this.subjectsList.length;
* Function to get the name of a column in the table.
* @param col --
* the column to be named
* @return String -- the column in the table
public String getColumnName(int col) {
if (getColumnNames()[col] != null) {
return getColumnNames()[col];
return new String("...");
* Function to get the value of the given row.
* @param row --
* the row of the object.
* @param col --
* the col of the object.
* @return Object -- the value at row, col.
public Object getValueAt(int row, int col) {
return getSubjectsList()[row][col];
* Function to return the data type of the given column.
* @param c --
* the column whose type must be determined.
* @return Class -- the type of the object in this col.
public Class getColumnClass(int c) {
if (getValueAt(0, c) != null) {
return getValueAt(0, c).getClass();
return new String().getClass();
* Function to put a value into a table cell.
* @param value --
* the object that will be put.
* @param row --
* the row that the object will be put.
* @param col --
* the col that the object will be put.
public void setValueAt(Object value, int row, int col) {
* TODO: Have a boolean value to determine whether to clear or
to set.
* if true clear else set.
if (value != null) {
if (getSubjectsList()[0][col] instanceof Integer
&& !(value instanceof Integer)) {
try {
getSubjectsList()[row][col] = new
Integer(value.toString());
fireTableCellUpdated(row, col);
} catch (NumberFormatException e) {
* JOptionPane .showMessageDialog( this., "The \""
+
* getColumnName(col) + "\" column accepts only
values
* between 1 - 12");
return;
System.out.println("Value = " + value.toString());
System.out.println("Column = " + col + " Row = " + row);
// column = Grade or column = Select
switch (col) {
case 2:
try {
// TODO
if (Boolean.getBoolean(value.toString()) == false
&& getValueAt(row, 0) != null
&& getValueAt(row, 1) != null
&& getValueAt(row, 2) != null) {
// subjectsList[row][col + 1] = new
Boolean(true);
System.out.println("2. false - Updated...");
* this.subjectListModel.add(row,
* this.subjectsList[row][0] + new String(" -
") +
* this.subjectsList[row][2]);
} catch (ArrayIndexOutOfBoundsException exception) {
exception.printStackTrace();
break;
case 3:
if (Boolean.getBoolean(value.toString()) == false
&& getValueAt(row, 0) != null
&& getValueAt(row, 1) != null
&& getValueAt(row, 2) != null) {
System.out.println("3. If - Added...");
getSubjectsList()[row][3] = new Boolean(true);
this.subjectListModel.addElement(this.subjectsList[row][0] +
* new String(" - ") + this.subjectsList[row][2]);
// subjectListModel.remove(row);
fireTableCellUpdated(row, col);
fireTableDataChanged();
// this.doDeleteSubject();
} else if (Boolean.getBoolean(value.toString()) ==
true
&& getValueAt(row, 0) != null
&& getValueAt(row, 1) != null
&& getValueAt(row, 2) != null) {
setValueAt("", row, col - 1);
setValueAt("", row, col - 2);
setValueAt("", row, col - 3);
System.out.println("3. Else - Cleared...");
// this.subjectListModel.remove(row);
break;
default:
break;
}// end switch
getSubjectsList()[row][col] = value;
fireTableCellUpdated(row, col);
fireTableDataChanged();
}// end if
}// end
* Function to enable edition for all the columns in the table
* @param row --
* the row that must be enabled.
* @param col --
* the col that must be enabled.
* @return boolean -- indicate whether this cell is editble or
not.
public boolean isCellEditable(int row, int col) {
if (row >= 0
&& (col >= 0 && col <= getNotEditable())) {
return false;
return true;
* Function to get the column names for the model
* @return Returns the columnNames.
public String[] getColumnNames() {
return this.columnNames;
* Function to set the column names for the model
* @param cols
* The columnNames to set.
public void setColumnNames(String[] cols) {
// if the column names are null the default columns are used
if (cols != null) {
this.columnNames = cols;
* Function to get the rows of subjects for the model
* @return Returns the subjectsList.
public Object[][] getSubjectsList() {
if (this.subjectsList == null) {
this.subjectsList = new
Object[getTotalRows()][getColumnNames().length];
return this.subjectsList;
* Function to set the subjects list for the model
* @param subjects
* The subjectsList to set.
public void setSubjectsList(Object[][] subjects) {
// if the subject list is null create a new one
// using default values
if (subjects == null) {
this.subjectsList = new
Object[getTotalRows()][getColumnNames().length];
return;
this.subjectsList = subjects;
* Function to get the total number of rows for the model. <b>NB:
</b> This
* is different to <code>
getRowCount()</code>.<code>totalRows</code>
* is the initial amount of rows that the model must have before
data can be
* added.
* @return Returns the totalRows.
* @see #setTotalRows(int)
public int getTotalRows() {
return this.totalRows;
* Function to set the total rows for the model.
* @param rows
* The totalRows to set.
* @see #getTotalRows()
public void setTotalRows(int rows) {
// if the rows are less than 0 the defaultRows are used
// set getTotalRows
if (rows > 0) {
this.totalRows = rows;
* Function to get the number of columns that is not editble
* @return Returns the notEditable.
public int getNotEditable() {
return this.notEditable;
* Function to set the number of columns that is not editable
* @param notEdit The notEditable to set.
public void setNotEditable(int notEdit) {
if (notEdit < 0) {
notEdit = 0;
this.notEditable = notEdit;
----------------------------END TABLE MODEL----------------------------------

I hope you don't expect us to read hundreds of lines of unformatted code? Use the "formatting tags" when you post.
Why are you creating your own TableModel? It looks to me like the DefaultTableModel will store you data. Learn how to use JTable with its DefaultTableModel first. Then if you determine that DefaultTableModel doesn't provide the required functionality you can write your own model.

My html table is not showing on the 2nd tab panel (muse widget)

Similar Messages

Maybe you are looking for