My husband saved a load of photos and video clips to icloud, please help.

my husband saved a load of photos and video clips to icloud, my phone has been taken so i no longer have it but didnt know how i can get up my photos without my phone please help.

Hi shaza31,
If your iPhone was set to save photos to Photo Stream, you may be able to access them by turning on Photo Stream on your other devices. The following article may be helpful:
iCloud: Photo Stream FAQ
http://support.apple.com/kb/ht4486
Regards,
- Brenden

Similar Messages

  • How do I get my wife's photos and video from her iCloud to my iPad?

    How do I get my wife's photos and video from her iCloud to my iPad. She no longer has an iDevice and I want to retrieve some really sentimental photos and videos of my grandson. I've logged on to her iCloud account on my iPad, but don't know what to do next.
    Thanks
    Tony

    Her camera roll photos and videos would be included in her backup.  Restoring her backup to the iPad should recover them.
    Start by creating a current backup of your iPad that you can restore your data from later.  It's faster if you do this on your computer using iTunes; if you can't, create a backup in your iCloud account.  If you can back up to your computer, do this by connecting the iPad to your computer, opening iTunes and going to File>Devices>Back Up.  Then go to File>Devices>Transfer Purchases.
    Then erase the iPad and restore her iCloud backup as explained here: https://support.apple.com/kb/ph12521.  When it's done, import the recovered photos and videos to your computer as explained here: http://support.apple.com/kb/HT4083.
    Then erase the iPad again and restore the backup you made earlier, either from iTunes or from iCloud depending on where you backed it up.
    If you want the photos back on the iPad, put them in a folder and sync them to your iPad by selecting the folder on the Photos tab of your iTunes sync settings and syncing.  If you want to videos back on your iPad, import them to your iTunes library (File>Add to Library), then sync them to your iPad from the Movies tab of your iTunes sync settings.  You will then find them in the Home Movies section of the Videos app on your iPad.  Just so you are aware, photos that you sync to your iPad can only be removed later by syncing them off your iPad (by deselecting the folder on the Photos tab and syncing again).  They can't be deleted on the iPad itself.

  • IMovie11 - MARKING PHOTOS AND VIDEO CLIPS USED IN PROJECTS

    After endless research, I have finally figured out how to mark the photos and video clips I have in my project so that I don't duplicate them in my project. It's actually easy once you know how to do it.
    1. Create your new project (Movie)
    2. Create your event with the photos and videos you want to use from iPhoto. Name your event same as your Project to make it easier to find the event for that project. The work flow will be > Event > iPhoto Library  > Albums > Select the entire Album or individual items.
    iMovie will not mark any photo or video that is not stored in iPhoto, so make sure you have your Photos and Video stored there. You can always delete any media later you don't want to keep. I found it easiest to organize the media I will be using in a project into an Album, and give it a name relating  to your Project so you know where they're at, and you don't have to sort through your entire iPhoto collection to find them.
    3. Now you have your Photos / Video in your event.
    * As you ad the media to your project, an ORANGE line will appear on the media indicating you used it in the project you currently have open.
    * If you see a PURPLE line on any of them, that indicates they are used in a different project you have created. >>> See Attachment ...
    Remember that you will only see these mark lines in events.

    If you don't want iDVD to show its theme or menu then go into the Map mode in iDVD and drqg the slideshow containing the photos and video clips into the blue Auto Play bin at the left.
    Click to view full size
    When inserted into a DVD player it will begin playing immediatey.  However, when findished it will fall back to the menu so use the menu which would look best for the situation.  They can be modified by droppiing image files into the menu settings bin to give it a different background.
    Make sure your photos and video clips end up  in the slideshow together:
    Click to view full size
    OT

  • I wrongly erased photos and video clips, can I retrieve them?

    I wrongly erased photos and video clips, can I retrieve them?

    Depends on how do you want to do it. If you store your backups with iCloud - try in your iPad's preferences. If you keep your stuff on your computer - plug your iPad in and launch iTunes, the photos should be there.

  • I've been using iMovie for a while now to make movies out of mostly travel photos and video clips.  I try to vary the time for the photos from 1-4 sec.  Any ideas out there?

    I've been using iMovie for a while now to make movies out of mostly travel photos and video clips.  I try to vary the time for the photos from 1-4 sec., although most of them are 1-2 seconds so as to keep it short.  A friend of mine who saw my most recent product said that this is too short.  Any ideas out there?

    I apologize for my confusion on your question.  I find that depending on the principal of each photo and my target audience to determine the time frame for each photo.  It seems most people get impatient with viewing one photo for more than 1-2 seconds if the photo is not complex.
    If there are several things that interests the viewers in any one image, they want to look at it a second or two longer.  If the movie of images is a training aid, the images may need to be more than 3 seconds.  For intro's, or a trailer for a training movie, no longer than 1-2 seconds.
    That was a long answer to say, generally speaking, I find 3 seconds to be an average time length.

  • HT4906 how do i access my photos and videos on my icloud from my wife's imac?

    how do i access my photos and videos on my icloud from my wife's imac?

    Do you mean your photos in the Photo Stream? 
    First her system and iPhoto version should support iCloud and Photo Stream:  OS X 10.7. 5 and iPhoto 9.4 or later.
    Next, she would have to log into the your iCloud account in her System/iCloud preference pane and enable Photo Stream:
    She would also have to enable Photo Stream in here iPhoto Photo Stream preferences:
    If she enables all of the iCloud features in the System/iCloud preference pane she'll be syncing your Contact list with hers, bookmards, etc.  If you want to have her only get the photos do not enable any of the other items.  If she has her own iCloud account she'll won't be able to use it.
    If you want to create a Shared Photo Stream
    so she could view the phtotos you put in it without using your iCloud account the system requiremets are:  OS X 10. 8.2 or later.  This Apple document describes what is needed: iCloud: System requirements
    OT

  • Load/download photos and videos from iMessage

    Hi! Is it possible to load/download all sent and received photos and videos from iMessage during the time, from for example one person? Thank you.

    I hope someone understands my question. In for example the app Viber, you can get up all the pictures and movies who has been sent betweet to persons. In iMessage or MMS on Apple you have to scroll back in the time to get it in the same way.

  • I am trying to transfer my old photos and videos from 3gs to pc help!

    ive got my old iphone 3gs that i am trying to get the photos and videos transferred to my laptop but i have attached it to my laptop using the usb cable but it just wont show anything in any folders to allow me to import them to my pc. I dont have icloud as yet i need to upgrade to windows 7 or 8 as i dont use my laptop much but ive got a iphone 5 now which i use i want to keep my old photos and videos from my old 3gs so i can sell it.
    Any options please. cheers.

    http://support.apple.com/kb/HT4083?viewlocale=en_US&locale=en_US

  • Deleting photos and videos from my iCloud

    I updated to IOS 8.1 today. I turned on iCloud photo library. Before I did that I had 9.5g free of 20g. After I turned it on I have 15g free?!  It's taking forever to upload my photos and videos. But I also want to see what's in my cloud so I could delete things if I no longer want them in my cloud. Any help would be great thanks

    Connect your phone to your computer and backup the camera roll to it. Use iPhoto on your Mac to move the files off the device so you can then remove them from the phone.
    iCloud doesn't backup anything unless you tell it to and it may require you purchase extra storage space for your data.

  • Moving Photos And Videos Solely To ICloud

    I have an ipad air 2, and as it is only a 16gb model I am running low on space, one of the things I am trying to do to save space is move all my photos and vides to solely my icloud (in full resolution), and not my iPads storage, is there any way I can do this? Thank you for your communication-Will  

    II'm sorry, but I really am not that familiar with the iCloud Photo Library, but after a closer look, you are correct. I don't use the feature anyway, because I do not want to give up iPhoto on my Mac nor do I want to pay for more storage than I already pay for.
    IF that wasn't a solution, there is no other way to store photos in iCloud and totally remove them from your device without overwriting them at some point tin the future. What I mean is - technically you could backup with iCloud - remove the photos from the iPad and the photos will be in that backup. However once you backup again, you may overwrite that backup and erase all the photos that were in the backup. I would never recommend doing this.
    No cloud storage in the world is as good as storage on a device that you can control and keep in your possession. What I do is import them to my Mac and then store them on another external drive. After they are imported, they can be safely deleted the from the iPad.
    My most important photos stored are on my Mac in iPhoto and on an external drive as well.
    Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

  • Assembling still photos and video clips into one video presentation.

    This is partly a Photoshop Elements and Premiere Elements (both version 7) question, so hopefully not posting to the wrong group (there doesn't seem to be a Premiere Elements forum anyway)!
    I am currently putting together a video/slideshow presentation, initially for display directly from a computer (to data projector) and then ultimately to end up on a DVD.  The presentation  consists of digital and scanned photographs (prints and transparencies) and video clips.  I successfully put together a slideshow of all the stills with Photoshop Elements, inlcuding music etc.  I then output the slideshow to Premiere Elements, so that I could merge it with my already edited video clips.
    The output process works smoothly enough, but as soon as I run the completed presentation, the quality of the imported slideshow is nothing short of woeful!  Each image is badly pixellated and all the transition effects are mangled - in short, it is unwatchable.  As it turns out, simply adding a single, still image to Premiere Elements results in a very poor final image.  Drop the exact same video clips and still images into Windows Movie Maker and the quality is spot on (as is playing the slideshow after outputting it as a WMV file and playing via any player capable of playing WMVs).
    Trying to go the other way, ie importing video clips into Photoshop Elements, pretty much always results in it crashing!
    The two products are marketed to "work together", but they are an abject failure in this regard!
    OS is 64 bit Vista Ultimate.
    I've tried searching the manuals and online help, but could find nothing of any help.  I've sent an e-mail to Adobe support, but have received no response from them (after three weeks).
    I'm hoping that someone may be able to point out something that I may have missed, or offer some tips and tricks.
    Thanks.

    There is a separate forum for Premiere Elements at
    http://forums.adobe.com/community/premiere/premiere_elements
    Also, my favorite place for Premiere Elements questions (including slideshows) is a site started by some Adobe Premiere Elements forum regulars at http://muvipix.com/phpBB3/index.php   Forum signup is free. There are multiple subforums at that site and because most of your questions are Premiere elements, I suggest that you post under the "PE version 7" subforum.
    Wherever you decide to post, I suggest that you include in your post my comments and the answers to the questions that I asked here.
    1 -- It has FAQs over to the right of the thread listing on the Adobe Premiere Elements forum. One of those FAQs that is relevant to your current workflow is
    What resolution should my photos be in Premiere Elements?
    http://forums.adobe.com/thread/431851?tstart=0
    2 -- Also, I suspect that you used Pan and/or Zoom on some of your photos when creating the Slide Show withinn Photoshop Elements.
    For those photos, you want the Premiere Elements setting of Scale to Framesize set OFF.
    3- There are also other considerations such as
    -- which Project Setting you are using in Premiere Elements?
    -- what dimensions are you using when you export from Premiere Elements to the WMV file?
    -- what is the resolution for the projector on which this video will initially be displayed?
    4 -- I do agree with your approach of adding the video in Premiere Elements.
    5 -- The mangled transitions needs more detailed info in order to discuss.
    Tthe timing of transitions is definitely different between the Photoshop Elements slideshow editor playback and the Premiere Elements output: this gives some people serious problems and for others it is not significant.  I don't know yet if that is your problem.

  • Music splits when adding photo and video clip

    Every time I add a new photo or video clip it makes the music split, so there is a gap in music from the beginning of the clip to the end. I can pull the music back, but that is getting aggravating. Is it the setting I have it on?

    There's a grey horizontal line near the middle of each track. When you drag a new item from the browser into the timeline, it appears with a black arrow. As you drag, when the cursor is above the grey horizontal line, the black arrow points right, meaning you're performing an "insert" edit, which moves everything else to the right in the timeline. If the cursor is below the grey line, the black arrow points down, meaning you're performing an "overwrite" edit, which should leave your audio tracks in place.

  • On old macbook photos would just go into iPhoto my hitting iPhoto button.  On the Mac Pro when I hit iPhoto button they "swish" into some document file on dock and I can't get them into my photos and events. Can anyone please help.  Gabrielle

    I am having major trouble trying to get photos into IPhoto.  On my old macbook, I just had to hit the IPhoto button - I have hundreds of photos and events but now I have this MacPro when I hit the Iphoto button the photos just "disappear" into a document file on the dock and the photos are all contained in some kind of arcs....I'm not computer literate and spent 2 years in one on one just learning IPhoto  Could some one out there please help me.?

    What version of iPhoto are you using?  Where are the photos coming from that go into the document on the Dock?  What iPhoto button are you referring to?
    OT

  • Displaying File Name for Photo and Video Clips in Premiere Elements 10

    I am using Premier Elements 10 on a Windows 7 Pro desktop computer to create
    a project consisting of 128 jpg photo and mp4 video clips.  Before creating
    the project I created a short file name for each clip describing its
    content.  I've added menu tags at locations which separate the project into
    discrete segments.  I've selected a disc menu which utilizes the menu tags I
    created.  I previewed the project and I'm satisfied that the DVD disc I
    intend to create will display everything I want except for one thing.  I
    have spent several hours trying to find out how to have each displayed clip
    include the file name (without extension) somewhere near the edge of each
    window as it is opened in the finished production.  I sure would appreciate
    some help with the steps needed to accomplish this.

    Welcome to the forum.
    This can most easily be accomplished by adding a Title (maybe from a Lower-Thirds Title Template), above each Clip/Still Image.
    I would create one such Title, and manually add the "File Name" in the location desired. Then, place that on a higher Video Track, above the Clip/Still. Then, just use the Duplicate Title function, to create a new Title, with the Text and Style, per the first - edit the Text for each, as required.
    I know of no automated method to grab the Clip's/Still's File Name, and add that to a Title, as PrE does not support any scripting.
    Good luck,
    Hunt

  • Upgrading to 11.1.1 has wiped my ipad1 of all music and videos when synching. Please help

    I am running Windows XP, have an ipad1 running IOS 5.1.1 and an ipod 5th gen 80gb video.
    I have 6,000 songs in iTunes, podcasts, books, apps and numerous movies and videos both purchased from Apple Store and some home converted mp4s.
    I upgraded to 11.1.1 5 days ago and since then, every time I have tried to sync my ipad as I add more videos, it has gone mad and on step 4 out of 5 of the synch process it hangs and then gives me a unknown error code -69 and not only does it not add any new video files, it removes existing ones that have always been there and I just get the grey dotted circle next to them now when I look at the ipad films directory.  Podcasts are fine.
    I have fully restored the ipad, I have experimented with manually managing music and videos, I have tried to add the old 'always worked before' videos back, one by one but absolutely nothing works and since I did the restore, it now won't add ANY of my music files...I just get the error -69.
    I connected my old faithful ipod instead to see what happened and exactly the same story.
    Can I roll back a version of iTunes? What can I do? It's been maddening and I have spent 2 days trying to fix it.
    Please let me know if you have any suggestions I can try. I see that many people here have had similar problems and turning wifi on the device off seemed to have helped - but I don't even have wifi on my ipod and it screwed that up.

    Hi there,
    That's a point for a huge discussion... "EPMA may already be on its way out the door"
    I thought that it is the other way round? That Oracle aims to stop using classic application and move everything to EPMA...
    Regards,
    Thanos

Maybe you are looking for