My I book G4 keeps freezing after 2 minutes everytime!

Im having trouble with my Ibook G4. Every time I turn it on. after 2 minutes to three minutes, it freezes on me. I cant move the mouse or anything. When I close the laptop, it is still on. Next I power it down and when I try to put it back on, I get the blue screen. Is there anyone that can help me with this problem? Help me please.

I have exactly the same problem - It totally freezes - no message or anything, just drop-dead nothing works any more.
If I let the computer "rest" for awhile, it starts up and runs for a bit, then eventually freezes. I had installed some (third-party) RAM (a Gig), but took that out (ran the diagnostics before and after with no problem either time).
The longer I let it sit, the longer it would run without a crash. If I started it up, but didn't actually do anything (after turning off the sleep function), it wouldn't freeze at all, but after running some apps, it would eventually freeze.
I hadn't thought of the over heating as being the problem, although it makes the most sense since I did everything else I could possible do, including running disk utility, zeroing the drive and re-installing, running Disk Warrior - nothing worked.
The computer was less than 3 months old when I started having this problem, and it was one of a few - the hinge was apparently too tight, which created stress on the monitor, so the seam where the monitor meets the plastic came apart, I had a few issues with synching with my acct., and various other minor issues.
I just sent it back to be looked at... I'll post when I get some feedback. I'm actually hoping that they just send me a new computer instead of sending this one back, as it shouldn't have had so many problems so early on.
One final note: When I bought the computer, it had Tiger installed, but the system discs in the box were Panther.9
I had to borrow a Tiger disc from a friend in order to run the Utilities and re install the software. Nobody at the Apple store or online could figure out why that would happen, but it did. Strange.

Similar Messages

  • I own a late 2009 Macbook Pro, and it keeps freezing after OSX Lion installation.

    I own a late 2009 Macbook Pro, and it keeps freezing after OSX Lion installation.  I will post my computer's 'specs' below.  I installed Lion, from Snow Leopard, through the App store.  The first week, it worked like a dream, and was loving my brand new computer, or so it seemed.  I then began to run into problems, and I can't confirm this 100%, but I believe it was after I updated from 10.7.1, to 10.7.2. 
    The freezes are sporatic at best, and cannot be narrowed down to one app.  I googled the issue about two weeks ago, and found a fix involving a temporary log-in, verifying the disk, restarting the computer holding CMD+R, and repairing the disk from there.  That fixed the problem.  For about three or four days.  From there I brought my laptop to Best Buy, where I purchased the computer (start the groans, my dad wanted the accidental damage, and he was paying, there was no argument).  My warranty there was still good, but all they were offering was to check my hard-drive, and possibly ship it out.  That would not be good for me, as I am a High School student, who works online. 
    So I then decided to go to the Apple store, see what they said.  They said a bunch of people had this problem, it would cost a lot to fix, as I would need a new Logic Board.  This did not make any sense to me, as I knew it was Lion's fault, so why would they not make the L-2009MBP Logic Board compatible, and why are only a few people having this problem, well a lot more than a few, but I mean not everyone. 
    So I asked a friend about it, and we decided to run a back up, and erase the computer, and re-install Lion.  Figuring maybe my data was corrupted during install.  This helped for a day or two, and happened again.  So this time, we backed up only files (music, pics, documents, etc.,) and did a fresh install.  I got my computer back last night.  Now, I am not saying that didn't help.  Previously I would have frozen about 18 times well writing this, but I have not frozen once (hopefully I didn't just jinx myself).  I have gone from about one freeze every 10-15 minutes (sometimes worse), to about one every 1-3 hours.  Which, let's be honest is still a lot. 
    So, before I just decide to go and revert to Snow Leopard on my merry way, I ask, do any of you have any other ideas?  Or guarenteed fixes?  I know a guarentee is a hard thing to ask for, but I am desperate, my teachers are getting angry with me for not sending work, and I know this would help a lot of people.  Thank you to those who read through my whole spiel, and thank you to those who will help me!
    [Ps, while I am somewhat of a noob, I know my way around a computer, so any help, or knowledge you could bestow upon me is awesome.  Especially DIY fixes.  (if your only advice is, don't buy a mac at Best Buy, don't bother commenting)]
    Macbook Pro
    15-inch, 2.53GHz, Mid 2009
    Processor:  2.53 GHz Intel Core 2 Duo
    Memory:  4 GB 1067 MHz DDR3
    Graphics:  NVIDIA GeForce 9400M 256 MB
    Software:  Mac OS X Lion 10.7.2 (11C74)

    Once it is downloaded you need to restart the computer if it does not restart automatically. When it next starts up you should note a progress bar appearing below the Apple logo. When done the computer will restart once more. The new firmware should now be installed.

  • Macbook pro keeps freezing after updating to Maverick

    my 1 year old macbook pro keeps freezing after i updated from mountain lion to maverick.
    all the time i had mountain lion i can remember maybe once where my mac froze. now, it froze probably 5 times in the last 5 days.
    how can i fix this, or better still - how can i revert back to mountain lion? no, i never used time machine and i have 90gb left on my disc.
    annoying.

    See ds store's user tip -> https://discussions.apple.com/docs/DOC-6162.
    Good luck,
    Clinton

  • Leopard keeps freezing after 15 minutes

    After clean installing with Leopard, my computer keeps freezing up about every 10 or 15 minutes. I thought it was dashboard or spotlight but I'm not so sure. I disabled spotlight but there seems to be something else running in the background. It sounds like something is processing in the background like something is installing or updating because I can hear my hardrive and cpu working. Everything freezes except for my mouse. Any thoughts?

    Run Applications / Utilities / Activity Monitor and select "All Processes" from the pull down menu at the top. Click on the CPU column to sort by CPU activity. See if you can determine what process is using up too much processor time.
    At the same time, run Applications / Utilities / Console and select "All Messages" in the column at the left. See if any error messages are being thrown when the system gets stuck.
    As basic maintenance, reset your Parameter memory (PRAM). PRAM holds copies of certain system settings for rapid access and if it gets out of whack odd things can happen. To reset PRAM, Shut Down the computer. Then reboot while holding down the 4 keys Apple-Option-P-R until you hear the SECOND startup chime, then release them. Your computer will continue to boot up normally.
    Also run Applications / Utilities / Disk Utility. Select the line in the column on the left showing the name of your main hard drive. Then click on Verify Disk in the panel on the right (if problems are found you will need to boot from your Leopard install DVD and run Disk Utility from there to repair them). If no problems are found, then also click on Repair Disk Permissions in the panel on the right. It may put out some notifications, but if it finishes with "Permissions Repair Complete" you are fine. Then Restart the computer and see if the problem persists. Be patient with both of these. They will take a long time and the progress bar may not advance until the very end.
    --Bob

  • My MacBook Pro is extremly slow and keep freezing after upgrading to Yosmite, please advise

    My MacBook Pro is slow after updating to Yosmite it keep freezing and Safari most of the time not responding, generally speaking the performance is way worse than Mavericks when it was installed and here is my config:
    EtreCheck version: 2.0.11 (98)
    Report generated December 1, 2014 at 12:53:23 PM GMT+2
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Mid 2012) (Verified)
        MacBook Pro - model: MacBookPro9,1
        1 2.6 GHz Intel Core i7 CPU: 4-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        Intel HD Graphics 4000 -
            Color LCD 1440 x 900
        NVIDIA GeForce GT 650M - VRAM: 1024 MB
    System Software: ℹ️
        OS X 10.10.1 (14B25) - Uptime: one day 16:9:57
    Disk Information: ℹ️
        APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
        S.M.A.R.T. Status: Verified
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) /  [Startup]: 748.93 GB (80.35 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 749.30 GB Online
        MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
        /etc/hosts - Count: 60
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.ZTE.driver.ZTEUSBCDCACMData (1.3.0) Support
        [not loaded]    com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.0) Support
        [not loaded]    com.nike.sportwatch (1.0.0) Support
        [not loaded]    com.novatelwireless.driver.3G (3.0.7) Support
        [not loaded]    com.novatelwireless.driver.DisableAutoInstall (2.0.6) Support
        [not loaded]    com.option.driver.Option72 (2.15.0) Support
        [not loaded]    com.option.driver.OptionHS (3.26.0) Support
        [not loaded]    com.option.driver.OptionMSD (1.21.0) Support
        [not loaded]    com.option.driver.OptionQC (1.11.0) Support
        [loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.74) Support
        [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) Support
        [not loaded]    com.vodafone.driver (3.0.5) Support
        [not loaded]    de.novamedia.driver.NMLGEDriver (3.2.10) Support
        [not loaded]    de.novamedia.driver.NMSamsung (0.0.2) Support
        [not loaded]    de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1) Support
        [not loaded]    de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) Support
        [loaded]    net.telestream.driver.TelestreamAudio (1.0.5 - SDK 10.6) Support
            /System/Library/Extensions/NMHuaweiPhonesVTPCDC.kext/Contents/Resources
        [not loaded]    de.novamedia.driver.NMUSBCDCACMData.VTP (3.2.6) Support
            /System/Library/Extensions/NMLGEDriver.kext/Contents/PlugIns
        [not loaded]    de.novamedia.driver.NMLGEUSBCDCACMControl (3.1.9) Support
        [not loaded]    de.novamedia.driver.NMLGEUSBCDCACMData (3.1.9) Support
            /System/Library/Extensions/NMSamsungDriver_106.kext/Contents/PlugIns
        [not loaded]    de.novamedia.driver.NMUSBCDCACMControl (3.2.12) Support
        [not loaded]    de.novamedia.driver.NMUSBCDCACMData (3.2.12) Support
            /System/Library/Extensions/NovatelWireless3G.kext/Contents/Plugins
        [not loaded]    com.novatelwireless.driver.3GData (3.0.7) Support
            /System/Library/Extensions/Vodafone.kext/Contents/Plugins
        [not loaded]    com.vodafone.driver.Data (3.0.5) Support
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
        [loaded]    com.adobe.CS5ServiceManager.plist Support
        [running]    com.nike.nikeplusconnect.plist Support
        [loaded]    com.oracle.java.Java-Updater.plist Support
        [running]    com.rim.BBAlbumArtCacher.plist Support
        [running]    com.rim.BBLaunchAgent.plist Support
        [running]    com.vsearch.agent.plist Support
        [failed]    de.novamedia.VodafoneDeviceObserver.plist Support
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist Support
        [invalid?]    com.adobe.SwitchBoard.plist Support
        [running]    com.autodesk.backburner_manager.plist Support
        [running]    com.autodesk.backburner_server.plist Support
        [loaded]    com.autodesk.backburner_start.plist Support
        [loaded]    com.microsoft.office.licensing.helper.plist Support
        [loaded]    com.oracle.java.Helper-Tool.plist Support
        [loaded]    com.oracle.java.JavaUpdateHelper.plist Support
        [running]    com.rim.BBDaemon.plist Support
        [not loaded]    com.vsearch.daemon.plist Support
        [running]    com.vsearch.helper.plist Support
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist Support
        [loaded]    com.adobe.ARM.[...].plist Support
        [loaded]    com.BlueStacks.AppPlayer.LogRotator.plist Support
        [loaded]    com.BlueStacks.AppPlayer.Service.plist Support
        [loaded]    com.BlueStacks.AppPlayer.UninstallAgent.plist Support
        [loaded]    com.BlueStacks.AppPlayer.UpdaterAgent.plist Support
        [loaded]    com.facebook.videochat.[redacted].plist Support
        [invalid?]    com.jdibackup.JustCloud.autostart.plist Support
        [invalid?]    com.jdibackup.JustCloud.signup.plist Support
        [running]    com.nero.HSMMonitor.plist Support
    User Login Items: ℹ️
        uHD-Agent    Application (/Applications/BlueStacks.app/Contents/Runtime/uHD-Agent.app)
        iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Dropbox    Application (/Applications/Dropbox.app)
        SpeechSynthesisServer    Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
        uTorrent    Application (/Applications/uTorrent.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
        Default Browser: Version: 600 - SDK 10.10
        AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
        AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
        Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
        net.juniper.DSSafariExtensions: Version: (null) Support
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
        Silverlight: Version: 4.1.10329.0 Support
        MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
        JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User Internet Plug-ins: ℹ️
        BlueStacks Install Detector: Version: 0.3.6 - SDK 10.7 Support
    Safari Extensions: ℹ️
        Awesome Screenshot
    3rd Party Preference Panes: ℹ️
        Flash Player  Support
        FUSE for OS X (OSXFUSE)  Support
        GoPro  Support
        Growl  Support
        Java  Support
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
            42%    firefox
             9%    WindowServer
             4%    system_profiler
             2%    hidd
             1%    plugin-container
    Top Processes by Memory: ℹ️
        1.44 GB    firefox
        215 MB    Viber
        155 MB    softwareupdated
        146 MB    mds_stores
        146 MB    WindowServer
    Virtual Memory Information: ℹ️
        206 MB    Free RAM
        3.39 GB    Active RAM
        3.14 GB    Inactive RAM
        1.16 GB    Wired RAM
        21.12 GB    Page-ins
        790 MB    Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Safari keeps freezing after the 5.1.4 update

    Safari keeps freezing up after the 5.1.4 update. I have no extensions. I also tried using firefox and it too freezes so it might not just be a safari problem.

    I'm convinced that something is possibly broken in Safari 5.1.4.  It's the first Safari update that has actually forced me back into using Google Chrome.  I've had intermittent beach balls and system wide stalls since moving to 10.7.3 (including Safari 5.1.4).  Removed every extension in Safari without avail.  Activity Monitor and Console never conclusively pinned down the culprit.  I finally moved back to Chrome, and my system is working again as intended.

  • Droid RazR keeps freezing after ICS upgrade

    After the ICS upgrade my Droid RazR keeps freezing & I have to reset it by holding down the on-off & volume down buttons...I did a factory reset as well which seemed to help but it still sporadically freezes up especially when texting...Is anyone else having this issue & know of a solution..? My battery drains a lot faster now too I've noticed.

    In another discussion thread, regor3 did the FR but did not allow the reset to restore the apps. Instead they reinstalled the apps one at a time on their own and things improved dramatically. There are apparently some old GB apps that don't play well with ICS.

  • Why does my iphone 4s keep freezing after downloading ios7?, why does my iphone 4s keep freezing after downloading ios7?

    my iphone4s keeps freezing immediately after downloading the ios7 update.
    has anyone else encountered this?
    will there be an update to fix this?
    what are people doing to solve this problem?
    thanks

    Sounds like hardware failure, called boot loop. Call Apple and or go on apple.com and make Genius Bar appointment to have your iphone reviewed by a Tech. Provided you iphone shows no physical or liquid damage they will take care of you, or if you have Apple Care Plus
    Genius Bar Rerservation :  http://www.apple.com/retail/geniusbar/

  • New tab keeping freezing after upgrade to v35 on Ubuntu 14.10

    After upgrading to Firefox 35 on Ubuntu 14.10, I keep experiencing browser freeze every time when I open a new tab. The browser freezes about 30 seconds when a new tab is launched.
    Is there anyone encountering the same problem? and How can this problem be fixed?

    Thanks for the reply. Tried, but didn't work. The freezing is actually trigged when I type in the address bar. I have tried different trouble shooting methods, but none of them works. The browser keeps freezing. There was no problem before upgrading to version 35. Maybe there is a bug. How can I submit a bug report?

  • Apple TV keeps freezing after update and snow picture

    Hi Guys
    I wonder if anyone else experienced this. After last upgrade my Apple TV main screen has some white dots all over it even when it plays the content. The picture is snowy all the time. Whats worse it keeps freezing while plying and I have to keep restart the whole thing.
    Any ideas and suggestions before I throw it through the window?

    its connected via hdmi cable, it has been for last 13 months and it was fine
    tv and cable work fine
    only apple tv crashes

  • Illustrator keeps freezing after plugging in a new Dell U2715H monitor?

    I just bought a new Dell U2715H monitor and ever since plugging it in Illustrator keeps freezing. It works for roughly 5-10 minutes then freezes. I just removed Illustrator CC and reinstalled so let's hope that works. Anybody else have this issue? What can I do to fix this problem?
    I'm running a MacBook Pro Retina 15", Mid 2014
    2.2 GHz Intel Core i7
    16 GB 1600 MHz DDR3

    A fresh copy of Illustrator has seemed to fix this freeze.

  • The Sims3 keeps freezing after lion update

    I have the Sims3 and ever since i updated  to lion it freezes exactly when i close a room or make a coupple of pools. it worked perfectly on snow leapord no complaints there. anyone know what to do i even bought a new game same problem. i realy want to play

    OMG !!!! I'm not alone!!! I tried thousand times reintall sims 3 and SP. And it keeps freezing, making me boot my mac pro. After that my disk utility found a damage part while verify my HD. I ance again, had to use the recovery Lion system. After that, I verifeid, and it was ok. So, I tried again reintall the Sims 3 EP and SP. And the problem of freezing is still there.
    My MACBOOK PRO  15 inch
    mid 2009
    Processor  2.53 GHz Intel Core 2 Duo
    Memory  4 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce 9400M 256 MB
    I need a solution, or after that, maybe a anti-stress therapy!

  • My macbook pro keeps freezing after i downloaded a file off of safari. how do i stop it from freezing?

    i downloaded some file and now my macbook keeps freezing everytime i go to delete it. now Finder won't even open anymore. what should i do to fix this?

    What was the file - file name, type, etc.?
    Clinton

  • How restore macbook pro v10.6.4 keeps freezing after complete

    It says install complete the restart. computer starts up to enter you info name password then keeps freezing. not sure what to do. I am using factory disk that came with computer. I bought it between 2009 - 2010. 

    It says install complete the restart. computer starts up to enter you info name password then keeps freezing. not sure what to do. I am using factory disk that came with computer. I bought it between 2009 - 2010. 

  • Mac keep freezing after every second.

    Hello everyone  this problem started happening yesterday.  Every time when I type a few seconds it freezes.  I have applications like Abelton live and using other game applications and they are freezing after every second i move the mouse or something.  Cant tell if this a hard drive related or the software any help thanks

    Remove "Kaspersky Security," if it's installed, by following the instructions on this page. If you have a different version of the product, the procedure may be different. The product includes a Safari extension that may not be removed by the uninstaller.
    Back up all data before making any changes.

Maybe you are looking for

  • Adding page headers and footers to Numbers 3.0 document

    I have not found any way to add page headers or footers to a Numbers 3.0 spreadsheet document.  Searching online help file did not yield solution.  Anyone have any ideas?

  • How to upload Images in Forms 6i

    Dear all, How to upload images in Forms 6i and save it in database. Please anyone help me with example. Thanking you Shekhar

  • Software Restriction Policy batch vs vbs

    Hi there, I have recently implemented a Software Restriction Policy on a Computer level with Disallowed level as default. I whitelisted the \\mydomain\SysVol so that my Group Policies could run. I have a few batch files that run upon user logon. The

  • .exe is not a valid Win32 application

    Hi All Reckon this is a common problem as it appears on the help topics but still can't sort it....When I try to download iTunes I get the following message: C:\Documents & settings\Ewan\Local settings\temporary internet files\content.IE5\OXABC5UN\iT

  • Fail to contact HTTPS/SSL p2 repositories

    I'm trying to add a custom HTTPS/SSL url repository to install from it an get. The repo is fine and can be installed otherwise. [You can only use links to eclipse.org sites while you have fewer than 5 messages. Therefore the link lacks the protocol h