My I message has stopped working after sending a very large iMessage!

I sent a very large message in iMessage and it failed to send and ever since it will not send messages to anyone! I have tried turning off and on the iPod and nothing has worked!!

Have you tried a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Similar Messages

  • My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update.

    My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update. It's not my home sharing or router setting, I have an ipad that I haven't yet updated that works completely fine and my network is run on the newest AirPort Extreme.

    i have same problem but much worst.. i update my iphone4s ios 7.1.1 to 7.1.2 and my iphone CAN'T READ MY SIM, MODEM FIRMWAY GONE, IMEI GONE, and same issue as you guys can't hear sound on my speaker but using earphone works, battery drain much faster than before. Any suggestion guys to Fix my iphone.thanks a lot. APPLE PLEASE FIX. TAKE ACTION.

  • My distributed form has stopped working after Acrobat did an update the form no longer appears in my tracker.

    I had a form that auto collected data through Adobe but it has stopped working after my Acrobat X Pro did an update.
    The form no longer appears in the tracker. How can this be fixed? I am using Windows 7.
    It would appear that since Adobe are going to be closing the Workspace area in January 2015 that when
    Acrobat did an update the ability to connect to files in the Workspace has been removed.
    Is there any way to reconnect the file back to the Tracker?
    Has anyone else had the same problem?
    Adobe don't seem interested in helping as this question has been posted for three days and yet no response.

    First and foremost thing you can do it is that reset your Firefox and after that change it to safe mode.This may be happening due to venerable links getting downloaded.
    enjoy free web..... :)
    regards,
    Gautam sharma.

  • Adobe Acrobat 9.0 has stopped working  (after Start Form Wizard)

    Downloaded Trial for Adobe Acrobat 9.0
    Tried reinstalling
    Latest windows 7 patches
    Adobe Acrobat 9.0 has stopped working
    (after Start Form Wizard)
    Windows can check online for a solution to the problem
    details"
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    Acrobat.exe
      Application Version:    9.0.0.332
      Application Timestamp:    4850eb76
      Fault Module Name:    MakeAccessible.api
      Fault Module Version:    9.0.0.332
      Fault Module Timestamp:    4850e54e
      Exception Code:    c0000005
      Exception Offset:    000e1059
      OS Version:    6.1.7600.2.0.0.256.1
      Locale ID:    1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    ===============================
    ===============================
    SYSTEM INFORMATION
    =========================
    System Parameters
    Available Physical Memory: 1429660 KB
    Available Virtual Memory: 1912212 KB
    BIOS Version: DELL   - 42302e31
    Default Browser: C:\Program Files\Internet Explorer\iexplore.exe
        Version: 8.00.7600.16385 (win7_rtm.090713-1255)
        Creation Date: 2009/07/13
        Creation Time: 4:43:32 PM
    Default Mail: Microsoft Office Outlook
        mapi32.dll
        Version: 1.0.2536.0 (win7_rtm.090713-1255)
    Graphics Card: Intel(R) G33/G31 Express Chipset Family
        Version: 8.14.10.1930
        Check: Not Supported
    Installed Acrobat: C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrobat.exe
        Version: 9.0.0.2008061200
        Creation Date: 2008/06/12
        Creation Time: 2:25:18 AM
    Installed Acrobat: C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe
        Version: 9.3.2.163
        Creation Date: 2010/04/03
        Creation Time: 10:57:52 PM
    Locale: English (United States)
    Monitor:
        Name: Intel(R) G33/G31 Express Chipset Family
        Resolution: 1024 x 768 x 75
        Bits per pixel: 32
    OS Manufacturer: Microsoft Corporation
    OS Name: Microsoft Windows Vista
    OS Version: 6.1.7600 
    Page File Space: 4194303 KB
    Processor: x86 Family 6 Model 23 Stepping 7  GenuineIntel  ~2493  Mhz
    System Name: DELLINSPIRON
    Temporary Directory: C:\Users\alan\AppData\Local\Temp\
    Time Zone: Pacific Standard Time
    Total Physical Memory: 2097151 KB
    Total Virtual Memory: 2097024 KB
    User Name: alan
    Windows Directory: C:\Windows
    Installed Plugins
    =================
    C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\Annots.api
        Version: 9.0.0.2008061200
        Creation Date: 2008/06/12
        Creation Time: 1:59:50 AM
    C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\EScript.api
        Version: 9.0.0.2008061200
        Creation Date: 2008/06/12
        Creation Time: 2:05:18 AM
    C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\PPKLite.api
        Version: 9.0.0.0
        Creation Date: 2008/06/12
        Creation Time: 2:08:24 AM
    C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\SendMail.api
        Version: 9.0.0.2008061200
        Creation Date: 2008/06/12
        Creation Time: 2:17:10 AM
    C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\Updater.api
        Version: 9.0.0.2008061200
        Creation Date: 2008/06/12
        Creation Time: 2:00:30 AM

    To go along with Michael's suggestion, something like AA9.2 is needed for X64 systems I think. Also, be careful. Acrobat is not licensed for use on a server. Using it as a user is fine, but not as a server application. Read the license carefully.

  • My iPad 1 has stopped working after trying to instal iOS 5. Can you help restore?

    My iPad has stopped working after trying unsuccessfully to instal iOS5. All that's currently showing on the iPad screen is a white USB cable with a thick arrow pointing towards the iTunes logo (black double note within a white rimmed circle and a blue background).I cannot switch it off and have seemingly lost everything that was on it.
    Please help!

    That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
    iTunes: Restoring iOS software

  • 'Attach photo' to emails and messages has stopped working. Help?

    'Attach photo' to emails and messages has stopped working.
    The function is grayed out. Help?
    — Relatively new iPhone 6+ with latest system ...
    If on a mac, I'd be running a disk utility or looking to overwrite an app, or re-install the system.
    Although over 25 years on Macs, this is my first iPhone... and I'm missing a few (probably) subtle things to do to resurrect this function.
    Help?
    Thanks

    Hi CartoonBob,
    If you are having issues with being unable to attach a photo from Mail on your iPhone, you may want to try some things to troubleshoot.
    First, quit all running applications and test again -
    Force an app to close in iOS
    Next, I would try restarting and if needed resetting the iPhone -
    Restart or reset your iPhone, iPad, or iPod touch
    If the issue is still present, you may want to restore the iPhone as a new device -
    How to erase your iOS device and then set it up as a new device or restore it from backups
    Thanks for using Apple Support Communities.
    Best,
    Brett L  

  • TS3048 My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.

    My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.What can I do?

    Hello:
    Try resetting the SMC and PRAM.
    Barry

  • Satellite U300-130 - TosBtMng has stopped working after Nokia PC Suite installation

    I've got the same problem too... with Toshiba Satellite U300-130.
    Bluetooth had worked pretty well before I installed Nokia PC Suite for my mobile on my PC (the newest version 7.1.26.0 from website).
    To be correct, at first I even managed to maintain a Bluetooth connection between PC and Nokia and ran syncronisation of contacts. I made several attempts but each time syncronisation run ended with message "PC coudn't get answer from your Nokia".
    After rebooting, my PC went crazy and started issuing message "TosBtMng has stopped working" and it restarted every time I ask it to close.
    Installation of new version of BT Stack (6.40) didn't fix this error.
    Please help

    Hi there
    I answered an existing thread with the same problem, but no-one can help apparently.
    Anyway,,, I can at least help you with getting rid of the looping setup. You need to rename the directory with the Toshiba bluetooth stack.
    I also have Nokia syncing and it worked fine until recently. - I have to say I think the problem relates to a Windows auto upgrade.
    How to solve this is a different matter. At this moment I have given up. The Toshiba bluetooth stack disabled.

  • "itunes has stopped working" after downloading album artwork??

    For years I've avoided ipod and itunes like the plague...but about 2 weeks ago I gave in. I got an ipod touch and installed itunes. Everything was fine - until this afternoon when I clicked on find album artwork in itunes. After itunes finished going through the process of finding the artwork ( 1400 of 1600 files found, 1450 of 1600 found, etc...or something like that ), i got the error message that *itunes has stopped working*. I've been searching forums all night and tried uninstalling eveything "apple" and reinstalling. Apparently this error comes up for A LOT of people ( problems like this are why I never wanted an ipod... ). None of the recommended fixes are working. I'm assuming something went wrong during artwork downloading????? Or not? I don't really care why actually, but, if itunes crashes every time i hook up my ipod, what good is it ( or the ipod )...and i don't know what to do with the ipod ( how to download apps, or add music, photos and videos ) w/o the itunes. My previous media players were all drag and drop ease.
    I'm a newbie - and i'm rally frustrated - so please be kind. Can anyone tell me - in plain terms - how to get my itunes to not "stop working" every time i hook up my ipod?? Please?
    THANKS.

    OK, so after looking everywhere for an answer - with no luck - I figured it out on my own ( don't ask me how... ). I'll tell you what I did. I bet you have the same problem. Honestly, I thought I'd be returning the **** thing, but it's fine now.
    I'd plug in my ipod ( 32gtouch, like yours ), and itunes would open. Everything was fine until it started to sync my music. Then it would freeze, give me the error message, and then shut down. I did this probably 10 times throughout the day, and always the same. Then I noticed it always froze at the same place during the sync. Soooo, I finally realized I must have a corrupt file.
    Step 1: Do as I did, but when it starts to freeze, take note of the name of the song it freezes on. That's probably the culprit .Remember it. Let the error message come up and close as always...
    Step 2: Open itunes again! Click on your ipod, and then on the music tab. Immediately un-check "Sync music" ( top of the page ) and then click "apply" ( bottom right ). DO THAT FAST...before it has a chance to sync, or it will just freeze again!
    Step 3: Go into your music library on itunes, and DLETE/REMOVE that song.
    Step 4: Close itunes.
    Step 5: Open itunes, and go again to your ipod, and click on music tab. This time, check the "sync music" box ( and apply ).
    That should fix it. If it doesn't you have more than one corrupt file. In that case, close itunes and then open it again. Follow step 1 and 2 again. Remove any songs from your library that aren't that important to you ( especially those that were from questionable sources... ). Basically, you need to figure out which song ( or songs ) are causing the problem. If you just delete them all, you'd have to add them again one at a time to avoid the problem again, and that would be a pain. So, just remove as many as you feel like ( out of 1500 songs or so, I removed a couple hundred ). I left mainly the ones that were from my actual CDs or that I had bought through Amazon ( or other legit source ). I removed most of my Limewire downloads. Most of them are probably fine, but I'll add them later one at a time to be sure...
    I still have plenty of Limewire songs on there, and they are fine, but, as you know, you do get bad files sometimes.
    Anyways, once I did this, everything is fine and works great. I even started adding album art manually, and at one point it froze again. So, I did steps 1 and 2 again, and removed the album art I last added, and then synced again, and it was fine. Usually, the album art I add is OK, but I had that one pesky photo I guess ). So, I guess the thing is after you get the majority of your music on, just add and adjust things a little at a time, and you'll always know which file is causing you problems ( hopefully no files will!! ).
    I hope this works for you. Let me know if you have any questions, and let me know if it solves your issue too!
    Peace.
    -***

  • "Mobile Device helper has stopped working" after installing most recent

    OK. Like a thousand other threads that have been posted over the past week or so on this topic and having tried most of the suggestions, I find myself at a loss.
    After most recent update (which I installed on Monday) from 3.1.2 to 3.1.3 all **** has broken loose between my *iPhone, iTunes & Outlook*. This all came to light just hours after the install. . . . I noticed that my phone wasn't syncing - at all, it just "hung" there then I went into my contacts in Outlook - gone. . . UGH, EEK, OK, so they're still on my iPhone BUT I can't get to them in Outlook. After loosing most of yesterday and all of today I am at the mercy of someone who might know how to resolve this issue.
    _*Steps I have taken :*_
    I have un-installed and reinstalled iTunes 5 times, no luck, I've restarted, yada yada yada. I've hidden my Norton's Internet Security, allowed iTunes, etc. *Still no luck*. Take in mind, all was great after months of perfect syncing, etc. no problems whatsoever . . .
    *The two messages that I continue to get when I open iTunes and connect my phone:*
    1) "Mobile Device helper has stopped working"
    2) " Unable to load data-class information from Sync Services. Reconnect or try again later".
    The most recent error message under "Problems Reports & Solutions" on my start menu read:
    Product: MobileDeviceHelper
    Problem: Stopped working
    Date: 4/7/2010 3:42 PM
    Status: Not Reported
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: AppleMobileDeviceHelper.exe
    Application Version: 16.691.14.1
    Application Timestamp: 4ba3b8fe
    Fault Module Name: CoreFoundation.dll
    Fault Module Version: 1.550.17.21
    Fault Module Timestamp: 4b8cb530
    Exception Code: c0000005
    Exception Offset: 0000db6b
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    This is the same message that I have received the last 10 times under Mobile Device Helper.
    *Please PLEASE please*, does anyone know how to resolve this problem?
    *Thank you SO MUCH for any insight.*
    -signed, UGH!!!

    Hi,
    I have had the same experience... uninstalled and reinstalled iTunes and all Apple components only to now be in a position where I can't sync my iphone at all (before I started trying various solutions I could still sync music... now nothing!) and I continually get the messages "mobile device helper has stopped working" and then "iTunes was unable to load dataclass information from Sync Services. Reconnect or try again later".
    I even tried reinstalling iTunes 9.0 but somehow I don't have the old library saved - means I lose all the ratings, playlists etc.
    Really frustrating and disappointing.

  • Adobe reader X has stopped working after autoupdate to 10.1.2 in windows 7 sp1 64 bits

    Hi! My PC is Windows 7 sp1 64 bits and installed adobe reader x 10.1.0 traditional chinese. Several days ago,it had been changed to new version -- 10.1.2 after autoupdate. From then on it couldn't work and clicked "adobe reader" icon in desktop then gave me a message saying "Adobe reader has stopped working",how can I do? Can every one solve it? Thanks!
    The Contents of Windows Event Viewer is under:
    System
    Provider
    [ Name]
    Application Error
    EventID
    1000
    [ Qualifiers]
    0
    Level
    2
    Task
    100
    Keywords
    0x80000000000000
    TimeCreated
    [ SystemTime]
    2012-01-16T15:48:26.000000000Z
    EventRecordID
    98171
    Channel
    Application
    Computer
    leekm-PC
    Security
    EventData
    iexplore.exe
    9.0.8112.16421
    4d76255d
    AcroRd32.dll
    10.1.2.45
    4f02f76f
    c0000005
    0011292c
    1fb8
    01ccd46646ec790b
    C:\Program Files (x86)\Internet Explorer\iexplore.exe
    C:\Program Files (x86)\Adobe\Reader 10.0\Reader\AcroRd32.dll
    86ba9536-4059-11e1-ba94-005056c00008

    Hi,
    It could be a case of a corrupt installation which could be causing the crash.
    Could you please follow, ʇɐb ɹəuəllıʍ suggestion, and uninstall the current installation of Adobe Reader 10.1.2 and restart if prompted for.
    Try and install Reader 10.1.0 again (from ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.0/zh_CN/AdbeRdr1010_zh_CN.msi).
    Now update the same to 10.1.2 using the installer from http://ardownload.adobe.com/pub/adobe/reader/win/10.x/10.1.2/misc/AdbeRdr1012.msp
    Try and launch Adobe Reader post the successful installation.
    Do ensure not to launch the application during the updating process.
    Hopefully this should fix things.
    Thanks
    Ankit

  • Receiving "iTunes has stopped working" after backup

    I just now updated to IOS4 and iTunes 10 on my 3G. I had been trying to do this for a week now after I got a new laptop, but it would never work, it would stay in backup limbo for hours and hours. I would even set it to update while I was sleeping and I would wake up with it still lagging.
    So I finally decided to just restore it to factory settings and get IOS4 that way. When trying to backup before the restore it kept shutting my iTunes down saying "iTunes has stopped working" and then tell me to close the program. So I just performed the reset without the backup.
    But now when I go to sync my apps and songs to the phone, it goes through the automatic backup step and as soon as it reaches the end it gives me the same "iTunes has stopped working" error message. I have tried everything I can think of.
    I reset my sync history, I uninstalled and reinstalled iTunes, I did a soft reset on my phone, I restarted my computer, and I cannot think of anything else to do.
    If anyone out there has any more suggestions, please help.

    Hi and welcome to Apple Discussions...
    now after I got a new laptop.
    On that computer launch iTunes. From the menu bar click Store / Authorize This Computer.
    Restart your computer and try to sync your apps.
    Carolyn

  • ITunes has stopped working after upgrading to latest version.......

    I recently upgraded my iTunes software but ever since I did that, I keep getting an error message that says, "iTunes has stopped working". I have included the info from the error. I am using Windows 7 64-Bit. I hope someone can help me with this. I miss my iTunes.
    Problem signature:
    Problem Event Name: BEX
    Application Name: iTunes.exe
    Application Version: 10.2.0.34
    Application Timestamp: 4d6dd34e
    Fault Module Name: icuuc40.dll
    Fault Module Version: 4.0.0.3207
    Fault Module Timestamp: 4d3b6a8e
    Exception Offset: 00073335
    Exception Code: c0000409
    Exception Data: 00000000
    OS Version: 6.1.7600.2.0.0.768.3
    Locale ID: 1033
    Additional Information 1: e043
    Additional Information 2: e0436f8e95924b8cc03f3b6e8fbccbe6
    Additional Information 3: 3521
    Additional Information 4: 352153d1c7a000354229557e718745c3
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt

    Hi and welcome to Apple Discussions, KLH.
    There are a few threads discussing this issue, including this one -> http://discussions.apple.com/thread.jspa?threadID=2771714
    That thread and a few others mention downloading the DLL from another site. Heres a direct link to the workaround/fix -> http://discussions.apple.com/messageview.jspa?messageID=13162938&stqc=true
    Also, there was a few posts asking what time zone people are in. What timezone are you in and is the computer updated?
    WTH.

  • "itunes has stopped working" after connecting ipad mini to computer Windows 7

    itunes can play 2 out of 10 movies already on my computer. Otherwise, when I start to play the other movies, I get the notice itunes has stopped working etc.
    Quicktime Player VERSION 7.7.4 can get to the Apple Store and order a movie.  But when I insert my Ipad mini, itunes IMMEDIATELY "itunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."  
    I reinstalled lastest itunes 11.1.3  after uninstalling it, and placed it not on the C Drive, which is pretty full but on another drive. I use ImTooiTransferPlatinum to put muisc onto my ipad mini, not itunes.

    also when I open itunes in safemode (using shift+ctrl), it works normally...

  • Illustrator CC has stopped working (after latest update)...

    Hi, 
    I get the following message "Illustrator CC has stopped working..." when I now attempt to launch the program. This is only following the new update of Illustrator. I have uninstalled Wacom Cintiq HD 13 from the PC. Has no change.
    Any help please? Thanks.
    Windows 8, Version 6.3 (Build 9600)
    Faulting application name: Illustrator.exe, version: 18.1.0.430, time stamp: 0x54247b91
    Faulting module name: Illustrator.exe, version: 18.1.0.430, time stamp: 0x54247b91
    Exception code: 0xc0000005
    Fault offset: 0x000000000013920a
    Faulting process ID: 0x3d8
    Faulting application start time: 0x01cfe32da5a29313
    Faulting application path: C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\Illustrator.exe
    Faulting module path: C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\Illustrator.exe
    Report ID: e519a0fe-4f20-11e4-82a4-74d435809d3b
    Faulting package full name:

    Hi Burninghammer,
    Are you using the Suitcase Fusion 5 software ? If yes than please update the plug-in from the Extensis web-site.
    There was a known issue with AI CC 2014 latest update & Suitcase Fusion 5. The latest update of the Suitcase Fusion fixes this issue.
    Please go through this KB article:
    http://helpx.adobe.com/illustrator/kb/illustrator-cc-20141-crash-launch.html
    If still you face the issue, than please let me know.
    With Best Regards,
    Sumit Singh

Maybe you are looking for

  • Screen

    I would like to ask you how can i clean my iMac screen. Can you tell me a couple of products that i could buy?  Thank you

  • Hierchical wth null and holes

    I am trying to mine the DBA_HIST_ACTIVE_SESS_HISTORY. The column that interrest me are 'sample_time','session_sid','session_serial#', 'blocking_session' and blocking_Session_serial#'. The purpose is to list per sample time the blocking session tree (

  • How to Send mail in oracle 10g

    I am new in oracle developer.....we are using oracle 10g developer...how to send mail through oracle 10g on a button click.pease help me. Thanks in advance

  • Launching AIR in middle of screen

    My AIR app can launch anywhere on the desktop. Is there a way to cause it to launch in the middle of the screen? Thanks

  • Adobe Reader X doesn't even try to validate expired user certificate used in digital signature

    Verifying a file signed with an expired certificate (timestamped or not) causes Adobe Reader to raise strange CRL parsing error: Note: the CRL is currently valid the errors "propagates" also on the OCSP responses the file is timestamped before the ce