My I-Pad has recently started "slipping iut of app" in the I-Book mode, any tips?
My I-Pad has started "slipping out of the app" when in I-Book mode and I-Book store mode. Engages for 5 seconds or so, Then reverts to app sceen. Can anyone share the fix for this?
Try restarting or restoring your device.
Similar Messages
-
My iPhone3GS running iOS5 has recently been reluctant to upgrade Apps. The App store asks for my password and then marks all the Apps as being updated. Often only one or none actually update. Usually I get a message saying "Unable to download application" and "<app> could not be downloaded at this time - Done or Retry".
It's not an iTunes login / password issue because sometimes one or two of the Apps will download and the others stall with the blank progress bar. The internet connection is working fine in all other respects.
Sometimes, many restarts later the downloads will complete. Is this a known bug? Is Apple working on it? Any fixes?My iPhone3GS running iOS5 has recently been reluctant to upgrade Apps. The App store asks for my password and then marks all the Apps as being updated. Often only one or none actually update. Usually I get a message saying "Unable to download application" and "<app> could not be downloaded at this time - Done or Retry".
It's not an iTunes login / password issue because sometimes one or two of the Apps will download and the others stall with the blank progress bar. The internet connection is working fine in all other respects.
Sometimes, many restarts later the downloads will complete. Is this a known bug? Is Apple working on it? Any fixes? -
Question says it all thanks.
- Restore to factory defaults/new iPod if you have not already tried that. If you still have the problem after that then it is very likely you have a hardware problem an an appointment at the Genius Bar of an Apple store is in order.
- Or maybe there is a problem with your cable or USB port/computer. Wehn you get the error again I would see if you have the same problem/error message with another cable and computer. -
My ipod touch 4 has recently started shuffling all the time even though I don't ask it to. Why has this happened and how can I stop it?
Music automatically shuffling This discussion thread may help you.
-
MacBook Pro has recently started to crash.
My MacBook Pro has recently started to crash. It sometimes crashes when watching streamed video (youtube/netflix), and will always crash when using high processor programs (e.g. final cut X, Logic Pro) and cannot run any games without crashing. Usually starts running hot before cutting to a blank screen (and any audio starts to loop), and requires a hard reboot.
Any help would be apreciated.
below are the latest error report, and hardware copied from settings.
- Andrew
Hardware Overview:
Version 10.6.8
Model Name: MacBook Pro
Model Identifier: MacBookPro6,2
Processor Name: Intel Core i5
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 3 MB
Memory: 4 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MBP61.0057.B0C
SMC Version (system): 1.58f16
Sudden Motion Sensor:
State: Enabled
Error report:
Interval Since Last Panic Report: 39772837 sec
Panics Since Last Report: 118
Anonymous UUID: 85CD0A42-38C0-4DC0-8A74-F2CA85EE41FB
Fri Mar 14 09:18:27 2014
panic(cpu 1 caller 0x5d8b4c9b): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0x80a47000 0x0a5480a2, D0, P2/4
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x545f9728 : 0x21b837 (0x5dd7fc 0x545f975c 0x223ce1 0x0)
0x545f9778 : 0x5d8b4c9b (0x5daca28c 0x5db3a800 0x5dad8e60 0x0)
0x545f9818 : 0x5d9cf608 (0xa179804 0xa365004 0x100 0x0)
0x545f9868 : 0x5d9c6601 (0xa365004 0x100 0x545f9898 0x5d8a4778)
0x545f9898 : 0x5e0e99a6 (0xa365004 0x100 0x438004ee 0x2024)
0x545f99d8 : 0x5d9ee2b5 (0xa365004 0xa34b004 0x0 0x0)
0x545f9a18 : 0x5d8bde7c (0xa365004 0xa34b004 0x0 0x0)
0x545f9ab8 : 0x5d8ba55b (0x0 0x9 0x0 0x0)
0x545f9c68 : 0x5d8bbaf9 (0x0 0x600d600d 0x704a 0x545f9c98)
0x545f9d38 : 0x5ceb58ff (0x545f9d58 0x0 0x98 0x2a45c9)
0x545f9df8 : 0x5cebb30f (0xa2f2004 0x0 0x98 0x7df3160)
0x545f9f18 : 0x5cebb7a6 (0xa2f2004 0x15d44204 0x464a5ef0 0x8)
0x545f9f78 : 0x5cebba91 (0xa2f2004 0x15d44204 0x464a5ef0 0x545fa1e0)
0x545fa028 : 0x5cecfd83 (0xa2f2004 0x15cb00e8 0x545fa39c 0x545fa1e0)
0x545fa298 : 0x5ceb13f1 (0x4620b000 0x15cb00e8 0x545fa39c 0x1488e400)
0x545fa3f8 : 0x5ceb162f (0x461c7000 0x15cb0000 0x1 0x0)
0x545fa428 : 0x5ceb40ec (0x461c7000 0x15cb0000 0xd0001 0x7e958080)
0x545fa468 : 0x5ced644a (0x461c7000 0x15cb0000 0x4617c280 0x140)
0x545fa4f8 : 0x5cec7c9b (0xdc9d200 0x15cb0000 0x0 0x1)
0x545fa558 : 0x5cec7f02 (0x4617c000 0x4617c788 0x15cb0000 0x0)
0x545fa5a8 : 0x5cec83d6 (0x4617c000 0x4617c788 0x545fa8cc 0x545fa86c)
0x545fa8e8 : 0x5cec51a1 (0x4617c000 0x4617c788 0x1 0x2209aa)
0x545fa908 : 0x5ce8c88f (0x4617c000 0x4617c788 0x15d69e80 0x507617)
0x545fa938 : 0x5cec6c64 (0x4617c000 0x545faa7c 0x545fa968 0x506ad1)
0x545fa978 : 0x5ce90c93 (0x4617c000 0x545faa7c 0x545faa7c 0x545fa9e0)
0x545faab8 : 0x5ceca5d8 (0x4617c000 0x1 0x545fabcc 0x545fabc8)
0x545fab68 : 0x5ce8cfe1 (0x4617c000 0x1 0x545fabcc 0x545fabc8)
0x545fabe8 : 0x56da06 (0x4617c000 0x0 0x545fae3c 0x545fac74)
0x545fac38 : 0x56e2a5 (0x5cf1b720 0x4617c000 0x9082688 0x1)
0x545fac88 : 0x56eb59 (0x4617c000 0x10 0x545facd0 0x0)
0x545fada8 : 0x286638 (0x4617c000 0x10 0x9082688 0x1)
0x545fbe58 : 0x21dbe5 (0x9082660 0x149085a0 0x1f81e8 0x5003)
0x545fbe98 : 0x210a86 (0x9082600 0x0 0x91453b0 0x12abb150)
0x545fbef8 : 0x216f84 (0x9082600 0x0 0x0 0x0)
0x545fbf78 : 0x295c57 (0x14d23f08 0x0 0x0 0x0)
0x545fbfc8 : 0x2a256d (0x14d23f04 0x1 0x10 0x14d23f04)
Kernel Extensions in backtrace (with dependencies):
com.apple.GeForce(6.4.0)@0x5ce81000->0x5cf37fff
dependency: com.apple.NVDAResman(6.4.0)@0x5d84e000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x5cad5000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x54998000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x5cb31000
com.apple.nvidia.nv50hal(6.4.0)@0x5dfb3000->0x5e3c7fff
dependency: com.apple.NVDAResman(6.4.0)@0x5d84e000
com.apple.NVDAResman(6.4.0)@0x5d84e000->0x5db3bfff
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x54998000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x5cad5000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x5cb31000
BSD process name corresponding to current thread: mcedit
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 35255929235626
unload
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i5, 2.4 GHz, 4 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9320325ASG, 298.09 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0xfa120000 / 5
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 7
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 3http://support.apple.com/kb/TS4088
You probably have the issue addressed by that article.
Take the computer to Apple or an authorised repairer, tell them that you think it may be the problem mentioned, and they should run a simple pass/fail test.
The service is only for three years after initial purchase, but several users here have reported getting free repairs even after that limit, sometimes after contacting Apple customer relations, pr speaking to an Apple store manager. -
My mid 2010 Mac running yosemite has recently started to lock up when I do a swipe on the magic mouse to scroll a web page. Anybody having a similar experience? I believe I've taken the last update to Yosemite within the last several weeks but this behavior did not start in concurrence with any system maintenance events.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
My Macbook Pro has recently started to mute/unmute itself randomly. VERY FRUSTRATING! It doesn't matter whether I have speakers connected or using the onboard speakers. Any suggestions?
I have looked at other forums and the fixes suggested do NOT work.
What would cause this?
How is it corrected?Hello DChrystal
Try paying attention to the Keyboard Viewer to see if any keys are being pressed that could be causing the sound to be muted. If it is, try it in another user to see if it is software that is causing the issue or if it is the actual keyboard that is having the issue.
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Regards,
-Norm G. -
My iPad 4th generation GSM has recently started intermittently freezing up on me. This goes on for up to 30 seconds at a time. I have rebooted it and that doesn't help.
Any ideas?Hi The problem should be solved by updating software to ios 8.1.1 My Wife has got this model IPAD and it works fine after this update Do this over your Wifi Cheers Brian
-
My iPhone 3Gs has started crashing when using apps once the battery gets down to around 80%.
My iPhone 3Gs has started crashing when using apps once the battery gets down to around 80%. Sometimes it will reboot on its own, and other times you have to leave it for an hour or so and then manually turn the phone on again. Any ideas?
Did you try to reset the phone by holding the sleep and home button until the Apple logo comes up again?
If this does not work, try to save as much data as you can and set it up "as new device": How to back up your data and set up as a new device -
I have an iphone 4s and recently it has not let me update my apps eventhought the apps are free!! I dont know why, it says my payment method is being declined, i have a very low balance but its a free app and a free update so that shouldnt matter shud it?
Yep, it does matter. You won't be able to update or get anything until this is fixed. Contact iTunes support to see what's wrong:
http://www.apple.com/support/itunes/ -
I haven't shut it down in over a month. I shut it down yesterday for over 12 hours yet upon starting up again the slowness persists. Removed Google chrome application the speed arose slightly any tips? I contacted a support member but unfortunately my warranty has run out, he suggested that may be a result of putting the mac into sleep constantly, and not shutting down and that there may be files i can clear to remedy the issue. Any suggestions would be greatly appreciated,
Regards.First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
"My ipod is displaying apple logo and wont start up, hard reset leaves it the same, disc mode works but iTunes doesn't "see" it even if the computer does."
It worked two days ago fine, for two years, until I installed this newest iTunes update, then for one day it kept on freezing and going to apple logo screen mode, then today it only goes to that screen and wont start up at all.
I've tried the hold down two buttons hard reset, that doesn't help. I've tried disc mode... but iTunes doesn't "see" it even if the computer does.
This is a pristine ipod, never exposed to adverse conditions, never dropped, never wet, and it worked perfectly two days ago.
Can I factory reset it somehow? (considering itunes can't "see" it)
[Ipod classic 160gb less than two years old.]Looks like I might have found the solution on a youtube comment:
R.O:
"Plug into you laptop first, whichever set up you use that has iTunes, i know it won't read it, don't even open iTunes as of yet. Do the typical reboot "Menu +Center button at the same time" and hold it, DONT LET IT GO like we were told, when the apple pops up.. KEEP HOLDING IT it will make a new ding sound I've never heard before. and since its hooked to you laptop already an error message pops up and says apple will need to download something to repair your iPod. I when u see that that when i let reboot buttons go. hit ok on the laptop something downloads for like 20 seconds then the iTunes icon hops around when you open it it has a screen with an iPod classic on it and says "Software version blah blah, iTunes will check for an update on such n such date" AND FINALLY there's a "Restore" button. click that and you will be back to square one with your iPod. Renaming , adding all the music on it, but it will work again, finally. "
I had to do it twice, because my mac froze the first time, but its recognized it now and is downloading the software as we speak...
Now I've clicked the restore button and it's restoring... I'll post again if its a success, otherwise assume failure. -
my ipod touch is frozen and it has a picture of a usb cable and the itunes icon, can any one help me??, my ipod touch is frozen and it has a picture of a usb cable and the itunes icon, can any one help me?? anything would be helpful!
What exactly happen? If it started and froze, at what stage did it freeze?
Maybe this:
Hang during restore process
Following Troubleshooting security software will frequently resolve this issue. This issue can be caused by the default packet size being set incorrectly. There may be third-party software installed that modifies the default packet size in Windows by inserting a TcpWindowSize or MaxGlobalTcpWindowSize entry into the Registry. Contact the manufacturer of the software that installed the packet-size modification for assistance in adjusting this TcpWindowSize values. Typically the default packet size is modified by 3G cellular network card software, ISP communication software, or Internet speed download optimization software. There are legitimate reasons to change the TCP/IP packet size and not use the Windows default settings (for example, network traffic optimization, home/broadband optimization, enterprise app optimization such as database apps, Exchange, and more). Deleting the "TcpWindowSize" or "GlobalMaxTcpWindowSize" entries in Windows Registry could affect the system's performance with other apps or on their network connections. Deleting the customized TCP/IP settings may require the reinstallation of any third-party applications that had modified the TCP/IP settings from the Windows default settings.
There are two ways to resolve this:
You can follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) , or follow the steps below to manually find and remove TcpWindowSize and MaxGlobalTcpWindowSize entries from the Registry.
For Windows XP, Windows Vista, Windows 7: Go to the C:\Windows folder and launch regedit.
Go to Edit > Find.
Search for "TcpWindowSize" entries. There are typically multiple entries of TcpWindowSize/GlobalMaxTcpWindowSize spread throughout the entire Registry. If "TcpWindowSize" exists, one or more third-party applications have changed the user's default Windows settings for TCP/IP.
Go to File and select Export. This step will export a copy of the Registry that can be used as a backup of the original settings.
Delete the "TcpWindowSize" entry.
Search for the next "TcpWindowSize" entry and delete each one until the Registry no longer has any "TcpWindowSize" entries.
Close Regedit, restart the PC, and test.
If you are uncertain as to why these registry entries exist and the PC is a business computer, contact your network administrator and determine what values TCP/IP can be set in their Windows Registry setting so that the PC can update or restore an iOS device rather than deleting the "TcpWindowSize" entry.
If editing the registry does not resolve the issue, restoring on a different computer that did not install the communication software is the step most likely to resolve this issue.
I would first try restoring on another computer. -
I'm trying to create a new movie. It tells me to name my movie, and the only event choice in the drop down menu is the last movie I made. IMovie Library is greyed out. I'm lost and I'm just starting. Not sure I like the new version. Any help out there?
peggy818 wrote:
… I'm lost and I'm just starting. Not sure I like the new version. …
have a read in the Manual:
http://help.apple.com/imovie/mac/10.0/?lang=en#mov755717b21 -
My MBpro has been running some kind of app in the background upon turning on, heating up for no cause. Is this normal since Snow Lepard? It's been updated and I also have anti-virus software too.
you're welcome....
also check activity monitor - all processes - see what's using up most of your cpu resources under % CPU....
highlight anything that's really high and hit quit process......anything over 10% is considered high - unless it's your browser....
good luck...
Maybe you are looking for
-
hi, when i am using select to_char(sysdate,'dd.mm.yy') from dual* then its giving the right answer 27.09.10. but when i am replacing the sysdate with the particular date format of oracle that is select to_char('27-Sep-10','dd.mm.yy') from dual* then
-
Controlling Document Not Getting Posted
Dear All, We have a peculiar scenario of Controlling Document not getting posted. Any pointers on wat could be the issue will be highly helpful. Scenario: We have an interface which posts an accounting document. Dr. Expense Cr. Balance Sheet. The Cos
-
RAID partitioning with existing data
Hi, I'm planning on resizing my OWC Mercury Elite Qx2 (RAID 5, 8TB( 6TB)) to 1TB partitions each in order to avoid the FW800 issue, which slows the port speed down. Only problem is, there's a fair amount of data on the drives (approx. 65% used space)
-
Specific Excel graph question for Indesign
Hello, I have a question about how to use an image generated on Excel for mac for Adobe Indesign CC. I have browsed the forums here and googled but I'm not finding solutions for my specific question (so please bear with me, thanks). I have a report f
-
i Tried to create a Data object as procedure but i got this error ERROR [NA000] [Microsoft][ODBC driver for Oracle][Oracle]ORA-04044: procedure, function, package, or type is not allowed here Source: "msorcl32.dll" can anyone please tell how can i us