My I pad has stopped working it Sayers not enough I cloud storage but won't let me do anything

Please help

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

  • Pro L10: After using a wireless mouse, the touch pad has stopped working

    Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. On start up the touch pad icon shows and the touch pad operates intermittently, after a few minuets the icon disappears and the touch pad stops functioning. In the control panel/mouse & or device drive I can the program operating and then disappears.
    I have removed the software and reinstalled to no avail. On occasions I get a message to say that another pointer is in operation.
    Can you help?

    Hi
    It seems that the wireless mouse or the wireless mouse drivers/software has a bad influence on the touchpad.
    I dont have a proper solution for this issue. Well, you can check the Toshiba driver page for newest driver updates. If the updates doesnt solve this issue so I suggest to use either the wireless mouse and disable the touchpad with the key combination FN+F9 or to use a common USB mouse.
    I assume that you dont have any problems with a common USB mouse.

  • In Photoshop Elements 11, the editor workspace has stopped working and will not open.

    In Photoshop Elements 11, the editor workspace has stopped working and will not open.

    Operating system? and how are you opening it? From a shortcut, from the welcome screen, from the organizer, from the program/application file itself?

  • Since downloading iOS 8 on my iPad 2 it has stopped working and will not connect to iTunes

    Since downloading iOS 8 on my iPad 2 it has stopped working and will not connect to iTunes to do a restore.  I have tried to do a reset using the sleep button and home key and all I get is a white band across the screen and then it boots into the main system but it is just a series of white lines going across the screen, how can I do a restore on this?

    Hey dbwithers,
    Thanks for the question. I understand that you are experiencing issues with your iPad after attempting to update to iOS 8. To isolate these issues, let’s try placing your iPad in recovery mode and attempting a restore with iTunes:
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • My one day old nano 6 has stopped working and will not restart can you help?

    my one day old nano 6 has stopped working and will not restart can you help?

    try this........ http://www.apple.com/support/ipodnano/assistant/itunes/

  • I have a WiFi home connection. It works on my laptop but has stopped working on my iPad, which I tried resetting but it didn't help. It recognises the SSID but then asks for IP Address, Subnet Mask, Router etc. Any ideas on what to do?.

    I have a WiFi home connection. It works on my laptop but has stopped working on my iPad, which I tried resetting but it didn't help. It recognises the SSID but then asks for IP Address, Subnet Mask, Router etc. Any ideas on what to do?.

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • When i Put my Ipod Touch 2nd gen in my computer it says Apple Mobile Device Service has stopped working and does not show up in itunes Help?

    well yh Apple Mobile Device Service has stopped working and won't show up the error message keeps on poping up?
    ipod touch 2nd gen
    http://gyazo.com/57a6260ece61212ba210bfe5659e399b.png

    Try this:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • Itunes has stopped working - quicktime will not open missing rundll32.exe

    I have a Gateway computer with windows vista. When I try to open itunes I get the message that itunes has stopped working and windows will close. When I try to open quicktime in the control panel I get the message the windows host process (Rundll32) has stopped working. I can not uninstall quicktime. I have downloaded and installed itunes and quicktime many times but this does not help. Please someone help me. I am at wits end. How do other people have itunes working with windows vista?

    Hey MrsBeth, it looks like your PC is on a network or something. I am uncomfortable giving advice since I don't know what's going on there.
    What I am comfortable with is these directions below. Give yourself full control and ownership the the entire C: drive and all its subfolders. And temporarily turn off UAC for good measure - you can turn it back on after you've installed iTunes.
    Let's cross our fingers that the install goes through!
    How to Take Ownership and Grant Permissions in Windows Vista
    How to Disable UAC

  • TS1702 I purchased Martha Stewart Magazine in Newsstand and it has stopped working ie does not even stay open if I click on it. Any suggestions?

    Martha Stewart Magazine on line edition in Newstand has stopped working. Any suggestions?

    So, OK, what did you do to **** Martha off? She is all powerful, you know
    Try a reset: simultaneously hold down the on and home buttons until the iPD shuts down, then turn it back on.

  • TS3274 My apps sound has stopped working.  Music and Internet sound is fine but all games have no sound

    My sound has stopped working only on games
    Works fine for Internet and music
    How do I fix this?

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • Cannot connect ipod to PC- uddenly has stopped working.PC will not recognis

    I have an ipod classic 30gb. I have previously had no problems connecting to my PC and synching with itunes. All of a sudden, my PC has stopped recognising my ipod when i connect using the firewire USB cable. Itunes still recognises my husbands ipod no problem. my laptop recognises my ipod no problem also. Please help!

    I had the same problem with my 80G. Turned out to be a Windows problem, not an iPod problem. Search a solution at Windows website. Its something to do with registries starting with $ sign. I had to remove all those registries and the the iPod worked fine. You may try RegCure software to cure registry problems.

  • Itunes has stopped working and will not open

    itunes stopped working for unknown reason and would not open. after several tries I used system restore taking it back to an earlier date.  when that failed to work, I uninstalled and downloaded new version, several times. still would not open and I am pretty sure I lost my library which is frustrating because I use it for work. completely confused about what to do next. I am running windows 7.

    Not completely sure. But if you think it is an iTunes issue...... follow through this: Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    ALSO, if you feel like all your music will be gone as well follow through these 2:
    > Downloading past purchases from App Store, iBookstore, and iTunes Store
    > How to use your iPod to move your music to a new computer
    IF YOU THINK ITS A COMPUTER ISSUE, RESTART YOUR COMPUTER BEFORE DOING ALL THIS.

  • Why can't i get my ipod to go to itunes store? everytime i do a message comes up....itunes has stopped working. windows 7 is looking for a solution. but a solution is never sent my way :( please help.

    any help woukld be great

    now i remember it the 5th gen has also had an error message saying it was corrupt, which i find ridiculous, as it has been working fine till now and has not until today been hooked up to my laptop for a while.
    Hmmmm. It might be worth checking to see if you're getting a Windows drive letter confusion on that laptop. See the following document:
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear

  • PSE 12 has stopped working and will not open.

    PSE 12 suddenly stopped working while editing.  I tried restarting the Organizer which opens but does not finish loading after a few seconds, and gives an error message ... "A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available."  I've received no notifications.  Any suggestions?  Do I download another copy?  How do I locate and retain my Catalog which is really important?  Thanks in advance.

    Operating system? and how are you opening it? From a shortcut, from the welcome screen, from the organizer, from the program/application file itself?

  • Equium M40X-189 - Touch Pad has stopped working

    The touch pad froze. I restarted the computer and the touch pad worked. This happened several times, and then restarting did not clear the problem. I checked under Device Manager several times and sometimes the mouse was listed and sometimes it wasn't! I Restored the computer to an earlier time when the touch pad was working but this didn't fix it. A Toshiba Agent suggested the soft ware was corrupt and I should back up every thing and use the recovery disc to reload the software for the touch pad. I'm not ready to do this yet. Currently an ALPS Pointing Device and an HID Compliant Mouse are listed under Device Manager and both are erroneously reported as working. Any other ideas on how to fix the touch pad?

    Hello
    In my opinion you should try to use external mouse to see if this occur again and again. Believe me on this way it is not easy to say why this happen.
    Maybe there is some hardware problem but it must be tested. If you preinstall the unit with recovery CD the unit will be clean and on this way it is not possible to say that some additional software has any kind of influence on this.

Maybe you are looking for

  • Importing Mail (12,5GB) from SL to ML won't work

    I want to import my mail folder like the title said. I used this tutorial:http://macs.about.com/od/usingyourmac/ss/moving-apple-mail.htm Searched for answers in the discussions board, but found no help regarding my issue. Everytime I copied the mail

  • Adobe flash player 11.5.5

    why ie-10/window 8/msn search is not upatable to adobe flash player 11.5.5?

  • My phone won't get 4G

    I used to get 4G but recently my phone only get 3G. I've turn off and back on, restart, changed to LTE/CDMA, start on safe mode... I've tried it all and nothing works. Can you please help me with this or please replace my phone. This is a new phone a

  • HT5312 i forgot set a rescue email address.before , how can i get it now?

    i forgot my security questions ,then i reset it by my email but i dont have any thing in my email. and when i set up my account , i forgot set a secue email address. can i set it now ??? i cant speak english =____= 

  • How to Change background colour in the Arrange page

    I find the LPX arrange page is generally rather too dark, is there a way of changing the background colour? I am sure L9 had this facility but cannot find it on LPX.