My I pad only turns on for a second then runs out of battery again

So my ipad ran out of battery so I connected it to a wall charger. It re-boot but the lock screen flashes for about a second then runs out of battery again. I have tried well over 20 times to fix it but nothing worked. Any suggestions?

Not charging
1. Reset iPad; hold the Sleep/Wake and Home button down until you see the Apple Logo
2. Try another wall socket
3. Try another cable (make sure it's an original Apple cable)
4. Try another charger (make sure it's an original Apple charger)
5. Clean Lightning port with compress air or new paint brush

Similar Messages

  • Why does my macbook pro turn on for two seconds then off?

    my mcabook pro only turns on for couple seconds then off. How do I get it to work ? i have important files on there.

    Boot to Recovery and try repairing the startup disk via disk utility
    OS X: About OS X Recovery
    an you start in Safe Mode?
    OS X: What is Safe Boot, Safe Mode? - Apple Support
    Try reinstalling the OS. This will not delete anything. The following works for Yosemite too
    OS X Mavericks: Reinstall OS X
    Also,
    This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

  • HT201295 My isight built in camera is only turning on for few second on my MacBook Pro (13-inch, Late 2011 ) when I use any camera needed app. Please help me.

    My isight built in camera is only turning on for few second on my MacBook Pro (13-inch, Late 2011 with osx Yosemite) when I use any camera needed app. Please help me. Its getting a little annoying.

    If restarting Mac or reinstalling OS X does not correct this symptom, you likely have a hardware problem.  Contact Apple Support or an Apple Authorized Service Provider for service.
    Message was edited by: EZ Jim
    Mac OSX 10.10.1

  • I'm trying to play this new movie i bought with my macbook but every time i put the movie in it makes a noise and only stays there for 6 seconds then ejects itself how can i fix this problem?

    I'm trying to play this new movie i bought with my macbook but every time i put the movie in it makes a noise and only stays there for 6 seconds then ejects itself how can i fix this problem?

    Restart your phone,hold the home button and the off button down till the apple symbol comes up. If that doesnt fix it , you need to do a restore in itunes by connecting to itunes , click on your phones name to the left, then click restore in the center of the screen and restore from backup.

  • When I open my newsstand, it only stay open for a second then shuts down.  It started after I updated my software to 6.0. Any suggestions for how to fix this?

    When I open newsstand it only stays open for 1 second then shuts down.  This started happening after I upgraded to 6.0. Any suggestions for how to fix this?

    Try quitting Newsstand completely - double tap home button, delete it from the multitasking shelf - then launch it again.

  • My iphone 4s gets stuck on "searching" for network after it runs out of battery

    My iphone 4s gets stuck on "searching" for network after it runs out of battery , i have to restart my handset repeatedly till it gets network why is this ? 

    Hello Andres.J,
    Thanks for using Apple Support Communities.
    Take a look at the following article, specifically steps 3-7 since you have already restarted the iPhone.
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/TS4429
    Take care,
    Alex H.

  • Mac Book only turns on for 15 seconds after SMC reset

    I've had this Macbook for a couple years now. The charger has already gone on me once. A while ago, the charger stopped working (no light), so I got it replaced under warranty. They sent me just the power block and the cord that goes into the computer.
    With the new charger, the light still doesn't come on, but I know it's charging because the battery would be long dead by now.
    However, the computer won't fully turn on. The power button does nothing. However, if I do an SMC reset, I can get it to turn on but after 15 seconds, it turns back off.
    Previously, it turned on, then I could enter my login details, but the screen would turn off before anything would load. I could hit the power button, and it would awake the computer again. It seemed to be in sleep mode then. I never got to anything other than the login screen.
    As I said before, right now if I do a SMC reset, it will turn on, but not before. And it only stays on for 15 seconds or so. I never get past the Apple logo.
    Any ideas? Thanks so much! Let me know if I need to clarify anything.

    Here are the options:
    http://support.apple.com/kb/he57
    https://www.apple.com/contact/
    Ciao.

  • HT203163 Hi, why is it that when I want to sample a song it only stays on for 7 seconds then dispapears when I should be able to listen to a full minute?

    Hi, hopefully someone can help me. When I want to sample a song to see if I like it, it only stays on for 7 seconds and not the full minute like it used to.  I have not changed any settings and am not sure on how to fix this. Can someone please help me out?
    thanks

    Hello npatel1207,
    You may need to increase the duration of the project.
    GarageBand '11: Set the project length
    http://support.apple.com/kb/PH1832
    Cheers,
    Allen

  • My iPhones turn back to 6.0 after running out of battery

    It was on 6.0.1 from the first day of 6.0.1
    I was restarting and reseting iphone this period and nothing changed. All normal.
    Tonight it's running out of battery and when i plug it in and turn on it was on 6.0 and ask for update.
    I notice that is back on 6.0 after syncing with iTunes 11 but i don't think it's related.
    Any idea?

    I just updated to iTunes 11, I'm going to sync right now and see what happens, will report back.
    holy crap the interface is totally different.
    Just finish syncing didn't change my IOS.

  • My computer will turn on for a second then shut off.

    I had just shut down the computer 30 min before so when i go back to turn it on i press the on button sounds like its starting up then shuts off it has a full charge took out the battery and tried it again. still doesn't work i kept try to turn it on and on but itll just act like its starting up then shut off. sometimes if i let go of the on button too early the light will just come on then immediately shut off. what do i do everything i own thats apple has been breaking this week.

    - If it is only one app try deleting the app and then redownload/install the app.
    - Reset your iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore your iPod.  First from backup and if problem persists restore to factory defaults/new iPod.

  • My camera only stays on for a second then shuts off. I have the new iPad  with retina display

    My new iPads camera shuts off a second after I turn it on, what can I do ?

    Try closing the Camera app:
    1. Double-click the Home button to reveal the Task Bar
    2. Hold down the Camera app for a second or two until you see the minus sign
    3. Tap the minus sign to close app
    4. Tap area above Task Bar to return to Home screen
    If the above doesn't solve the problem, do a reset:
    Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider

  • K7N2 Delta. Turns on for a second, then shuts down

    It just stays on for a second and then shuts off

    i wish i could read minds on distance.
    post amps on the 3.3v 5v and 12v rails on the psu.
    is written on a label on the psu.
    then post ALL your hardware.
    cpu memory harddrive cd and so on and also what you have tried so far

  • Everytime i try to acces my music or the app store it goes for a second then flashes out. what do i do?

    i've been having my ipod for 3 months and it has always worked well, but for the past 3 days, i have been trying to go on my music, internet, youtube, and the app store, but everytimei go into it, it goes for a second and then it just flashes out. i am not able to access any of those things. I have already restore it and still NOTHING! what do i do? what is happenning with my ipod?

    its an ipod touch 4g.
    PLEASE HELP!

  • PS4 turns on for split second then turns off (Not BLOD)

    My PS4 was purchased via preorder on launch day here in South Africa - Friday 13th December. After working for 2 days,it now fails to turn on. I've read about the blue light of death that just pulsates continuously but what I'm getting is a beep and blue light for less than a second before it turns off completely with no light.
    If I then press or hold the power button again, I get nothing. I have to unplug it from the wall and replug it in and then if I press the power button again, it does the same as before - beep and split second blue light before going dead. Here is a video I took of it:http://t.co/VIrDS9KI1G I can't get into safe mode. If I try to hold the power button down, it just does the same as above. It doesn't stay powered long enough to reach 7 seconds. I've also tried removing the HDD and booting without the HDD in to try and force safe mode but again, it does exactly the same as above. I've tried using different plug points and adapters that I know work and I've done so with no other devices plugged into these points or adapters. In my highly amateur opinion, it feels like a power supply issue where power is cutting practically immediately.

    It's a power issue, I've noticed this because I was moving my PS4 from downstairs where I tested it, to my gaming room where it'll live FOREVER! lol... and the power was unplugged, but I touched the button as I lifted the console. It beeped as if it was going to come on, then because it had no power it just went off again. Just like you describe. So the console is acting like it does when it has SOME power, but not enough in my opinion.
    Once I got it upstairs and plugged in the power, it came on and all was ok.
    I recommend:
    Giving the PS4 ITS OWN PLUG SOCKET, don't plug it on a multi-adapter where it's power might be shared/weakened.
    Give the PS4 a moment of being plugged in so it can store enough power to turn on.
    Make sure your cables are all good,

  • Hi, today I was making a FaceTime call when a friend of mine knocked my iPhone 4s onto the ground. The screen turned blue for ten seconds then the phone rebooted. What happened?

    I haven't noticed anything wrong with the phone, I just want to know what happened and if I should do something about this.

    After some troubleshooting, I decided to order a new battery.  I replaced the battery and was then able to get it to restore, however--after I restore it and it comes time to restart the phone, it gets stuck and doesn't turn on.
    Sorry, your repair ruined the iPhone.
    She does not have apple care and even though she loved this device, she isn't going to buy another iPhone because of all the problems shes had with this one (it's just over a year old).
    After you ruined the iPhone with DIY, Apple won't touch it anymore. You should have asked before all these had happened.
    I'm an android user myself and I love rooting/flashing new ROMS, so if jailbreaking her phone or doing some kind of super-restore with 3rd party programs might help, I'm all for it-
    Yeah, all Android user can think of is Jailbreaking, read this: http://support.apple.com/kb/HT3743

Maybe you are looking for

  • Integrating flex with webdynpro java

    hi, iam new bie in webdynpro java.please tell is there possibility of integrating flex in webdynpro java,if so what are the prerequisites for it.

  • Lost Wireless Connection Again

    Out of the blue in the middle of loading a web site, I lost wirless connection and nothing would make it reconnect. (turning ariport card off and on, sleep, diagnostics, etc) Connetion status went grey as well. However, I was able to plug an eitherne

  • Logging web stats in Oracle 8i

    Hi, Not sure if I'm in the right forum, but here goes: We have developped a ColdFusion-based application that serves up URLs compiled in an Oracle 8i DB via our website (http://www.workinfonet.ca). I was wondering how we can incorporate web access st

  • Logic Pro missing a portion of additional content

    Logic pro X says it has installed all additional contents in the download additional content window , but they are not all showing up in the library and when I load an older project (created on my old mac) there will be missing contents. I have recen

  • Receiver RFC

    My scenarios is async SOAP->PI 7.0 SP15->(async RFC) SAP 4.6C , I need to ensure messages are sent to SAP system in order also If message fails in R/3 during RFC processing, I need to stop sending next message to R/3.  If RFC call is processed succes