My I pad won't pick the wi fi from my apple airport

My I pad won't pick up the airport wi fi

This can happen when you upgrade to iOS6 - I am assuming that you have tested your network with other devices and your Express is set up properly and you know the network name and password - I would go to setttings on the iPad  --> General --> Network --> Wi-Fi and make sure that Wi-Fi is ON and Ask to join other netwroks is on - then wait a while and see if your network shows up in the Choose a Network section and when asked enter your password - if it works then your password will be remembered and the iPad will connect automatically when you are in range of the Express.
But if you can't see your network to start with or you just can't connect, turn off the iPad and restart it - this may allows the radio to re-connect with the network and you can connect using the steps above - if you are still unsuccessful, then I suggest that you re-post this question in the iPad discussion or contact Apple directly - let me know how you make out.
Charlie

Similar Messages

  • How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?

    How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?

    You can only locate, lock or erase your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
    Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

  • My JSP engine won't load the new source from my page

    My JSP engine won't load the new source from my page, even know I saved it, and I restarted apache, and resaved the files again, no dice! It must be running off of cash, it's not in my browser cash I cleared it out too, what else can I do?

    Tomcat checks to see if the JSP has changed since it was last compiled with you request that page... So, if the file is updated, it should recompile it. Are you sure that when you update the page, you're updating the same copy of the page? (the location defined in the server.xml file)

  • Using substring to pick the numeric value from a string failing

    Hi,
    I have a string like fffd_1234.com from this I need to pick the numeric value from which is in between the _ and . , for that I have wriiten the expression as
    Reverse(SUBSTRING( REVERSE( "fgfg_asdd.com" ),
    FINDSTRING(Reverse( "fgfg_asdd.com" ), ".", 1 )+1 ,findstring(
    Reverse( "fgfg_asdd.com" ),"_",1 )-FINDSTRING(Reverse("fgfg_asdd.com"
    ), ".", 1 )-1))
    This is throwing me the error or its giving me with the result with _123.

    Why all the "reverse" calls?  Do you expect underscores or periods to occur more than once in the file name?
    This should work:
    SUBSTRING("fffd_1234.com", FINDSTRING("fffd_1234.com", "_", 1) + 1, FINDSTRING("fffd_1234.com", ".", 1) - FINDSTRING("fffd_1234.com", "_", 1) - 1)
    Talk to me now on

  • Why can't you purchase an audio book on the Itunes store from an Apple TV?

    Apple seems to be moving everything they sell on Itunes to graphics, away from the traditional text based browse function they started with.
    I don't think they've done the most effective job on that move on a PC/Mac, it's sometimes easier just to go through the Apple TV and buy from there and let it just sync and transfer to my Itunes library on my PC.
    However, I've noticed that you can't purchase an audiobook from an Apple TV, though you can purchase everything else that can play on an Ipod from there.
    Audiobooks just don't show up as an option on the Itunes store from an Apple TV, but they do play on your Apple TV if you purchase them from the Itunes store from the PC or Mac you sync or stream from.
    Does anyone know if this is a licensing issue, or yet another oops/oversight on Apple's part? Doesn't seem to make sense, Apple has been pushing tighter and tighter integration between the Itunes store and Apple TV, and it's yet another lost revenue stream on Apple's part that I hope they fix.
    If you can buy it from the store, you ought to be able to buy it using your apple TV. Period. Makes as much (non)sense as restricting what content you can purchase if you are buying it from an Iphone vs. a PC vs. a Mac. If you sell content on your store that plays on your devices, then sell it, regardless of which device (that you also make and sell) that your customers access your Itunes store from. It's why they make us sync everything back to Itunes on a computer in the first place.
    And yes, while it may sound counter-intuitive to listen to an audio book from a device connected to a TV,
    I listen to audiobooks from my Apple TV nightly in my bedroom to go to sleep by, streamed via airtunes to the Aux port on my clock radio by my bed, then turn the TV off and snooze. Works extremely well and has for years now. Beats headphones or futzing with external speakers on an Ipod or trudging upstairs to the room I have my PC in to stream an audiobook to airtunes, then back to bed. With Apple TV, it's pick, click, then turn off the tv and the lights. Sure would be nice to buy an audio book that way also.
    Any thoughts on why they would restrict you from buying audiobooks from an Apple TV? To me, it's yet another lost revenue opportunity for impulse buys courtesy of Apple.

    Send your tv feedback here

  • What HDMI cable do I need for my MacBook (2009) to my SONY HDTV? I thought the HDMI cable from my Apple TV would work, but it doesn't.

    What HDMI cable do I need for my MacBook (2009) to my SONY HDTV? I thought the HDMI cable from my Apple TV would work, but it doesn't.

    The model 7,1 is actually the Mid 2010 MacBook and is the only MacBook with a Mini DisplayPort that sends audio along with the video, Here's some Mini DisplayPort to HDMI with audio adapters from Amazon.
    http://www.amazon.com/s/ref=nb_sb_ss_i_3_35?url=search-alias%3Daps&field-keyword s=mini+displayport+to+hdmi+with+audio+for+macbook+pro&sprefix=mini+displayport+t o+hdmi+with+audio%2Caps%2C252

  • I want to remove the rental movie from my apple tv before its expiring time. Help?

    I want to remove the rental movie from my apple tv before its expiring time. Can someone help me?

    Put it in DFU and do an update. This will not only update it, but it will remove all settings. DFU =  hold menu+play while plugging it in.

  • Issues with signal input adaptive filtering, it won't filter the added noise from the input waveform

    Hello,
    I have an issue with my adaptive noise cancellation program. Essentially I want to input a custom wav add noise to it and then filter the noise away in order to gain the custom wav again.
    While doing so I want to read the learning curve and read the adaptive coefficients. Unfortunately I have an issue when it comes to the filtering of the custom wav+noise. It won't filter the signal at all.
    It would be helpful if someone could have a look at it and possibly help me out.
    Thanks!
    Attachments:
    Testing.vi ‏59 KB

    Hey Jan,
    Thanks for the reply. I am currently using the Adaptive Filter Toolkit in order to obtain those VIs. The VIs which are in use are the LMS Adaptive Filter ones. 
    I figured there might be an error with the input of the array. This VI requires a DBL Array but it seems like it can not process it. 
    The "Get Wavefirn Components" works better now but I still have an issue with a time. I put a 9s wav file in but it only computes it in a very short time and I can not play the file while it is computing.
    I added the modified program to the attachments. 
    This program is ought to read a waveform file add noise to it and then use an adaptive filter in order to get the orginal waveform back again and if possible either store or play the final waveform. 
    Thanks for your help.
    Attachments:
    Testing.vi ‏62 KB

  • I want to Pick the Single file from The source Directory

    Hi,
       My Scenario is File to RFC .. I'm getting the files in the source Directory.. File names  are  SENDER_(TIMESTAP).XML .. but the problem is... When ever  Files  are available in the Source Directory  Immediately  XI was picking  all the files at a time.. But I want to   to Pick a single file at a time..
    for Making  this what we have to do..   After Processing the first file then only my Sender adapter should pick the next file...  (even though Multiple files are available in my Source Directory)
    Regards
    Jain

    Hi,
    the other option was use Adapter specific attributes in the Sender Communication channel..
    or
    while droping the files ask them to drop using time stamp in another directory  and an external validation is required .. and after validation push single file to Source directory using batch file..
    i.e use a batch file using run time operating system or make that batch file to run at OS level ..
    where the batch files needs to validate the time interval of the file and needs to push a single file to the source directory.. where from there we can directly pick a single file and process..
    regards,
    Kishore

  • Use the TV to pick the desired tune from iPod?

    I was wondering if it's possible to connect the iPod to the HiFi- system and at the same time see the library at the TV screen. It would be very easy to pick the right song.

    No, you can't see the iPod menus via the TV screen.
    I think once upon a time there were some 3rd party docks that had a menu of sorts that could be displayed (Marantz had one I think), but it wasn't the menu that you see displayed on the iPod.

  • Pls help. My Camera Raw, CS6 and Lightroom won't read the NEF files from D610.

    I recently upgraded to Nikon D610 and the NEF files were not readable from my old version of Camera Raw, CS6 and Lightroom. So downloaded the recommended upgrades and I now have Camera Raw 8.4.0.199; Lightroom 5.3; CS6 13.01. But still did not read my D610 NEF's. Please help. Thanks.

    oh wait, i got it. Just in case for those who will have the same scenario. I downloaded the NEF files from my D610 using the old ViewNX 2.1 software and that was the cause of incompatibility. So i upgraded my ViewNX to 2.9 and downloaded my images again. And it worked this time.

  • How can I stop the voice over from my apple tv

    I have just connected my Apple TV which appears to be working ok. How do I stop the interactive voice from speaking.

    I have the 2nd Gen Apple TV and it is where I said. Have you updated yours to the latest firmware/software? I can't see why you are unable to find it otherwise. I will take pictures if you want me to.

  • HT201365 how do i change the passcode for using my ipad that i created when installing find my iphone. the is different from my apple id and password

    how do i change the passcode for using my ipad which i created when i set up findmyiphone.  this is different from my apple id and password

    On both your devices go to Settings>iCloud, then scroll down and click "Delete Account". You can then sign back in using your updated details.
    Note: "Delete Account" will not delete data from iCloud, it will simply remove the account from your device.

  • It won't pick the paper in the main tray

    My printer will not pick up the paper in the main tray.  It keeps saying I'm out of paper.

    Hi kappadee,
    I found this video on HP's YouTube channel, HP Printer Support.
    Try following these steps to see if your paper pick up issues are resolved!
    http://youtu.be/YHYLTnslQR0
    Let me know if this works for you.
    Thanks,
    -hjs_19 *I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos Thumbs Up" on the bottom right of this post to say "Thanks" for helping!

  • Iphone 4 randomly came up with a grey screen showing 'ios6' and then said 'connect to iTunes'. However iTunes won't pick the device up and states there is an error with the device?

    My iPhone was working fine yesterday and then showed a grey screen with the message 'ios6'. When I tried to use the phone it came up with the error message 'connect to iTunes'. When I got home from work I did this, at first iTunes could not detect the device and then it suggested a system restore. Once the restore had completed I selected the language, country/region and then came back to the same error message 'connect to iTunes'. When I tried to connect the device iTunes could not detect it and stated that there was a problem with the device.
    I have telephoned my network provider to request a replacement device on my insurance but they have said they cannot authorise until I have had the fault diagnosed my Apple. Only problem is there are no genius appointments free until Friday!
    Any help would be massively appreciated!

    We're not Apple. Se can not magically make a genius appointment available for you.

Maybe you are looking for