My i phone 4s ios 7 doesn't join the network
my i phone 4s ios 7 doesn't join the network
Well, for the time being (I mean, if Apple does not go back to the bolt/plug icons) if the device shows 100% then it's fully charged.
But feel free to let Apple know that you want it in http://www.apple.com/feedback
Similar Messages
-
when i update my software to 6.1.3(10B329)to I phone 4s the wifi is not working and not auto join the network that i have already connected to
First, grow up. Just because YOUR phone isn't working, doesn't mean Apple put out bad software. I've not had any difficulty, nor has anyone else I know. And just how is Apple risking lives with Bluetooth kits not working? It's YOUR decision to talk on the phone or text and drive. Not Apple's.
We're users here, volunteering our time to help others. Posts like yours, which are whiny and ranting, simply means we're likely to ignore you and not provide you with any help. Not to mention, it makes you look absolutely foolish.
Further making you look foolish is the fact that you haven't even asked a technical support question, nor have you provided anyone here with any troubleshooting steps you might have taken, including those recommended in the user guide.
Good luck getting help.
GDG -
Hi! I have the Iphone 4 IMEI 012337006686812, I live in Russia, can not activate, then the Russian SIM card, but he doesn't catch the network!
never write your IMEI online people can abuse it then
contact the place to got the phone about it being sim locked to anothe network then the one you are trying to connect to apple can not unlock phones only the carrier it's locked to can -
IOS 7.1. Unable to join the network (Cisco Router)
I have an iPhone 5s (iOS 7.1. GM - Public). My phone and wifi connections worked fine until last week.
Now when I have tried connecting to my home wifi network (using CISCO router; other wifi connections are working normally), my phone is giving me the message "enter the password" and there is an username too. So, it is impossible to connect to wifi network - "unable to join the network".
I tried to Reset Network Settings on iPhone, and Restore an iPhone (over iTunes), reset cisco router to factory settings etc. without success.. any idea what could be wrong?Hi kopacev!
You may need to make sure that your router settings conform to the suggested settings in the following article for best performance:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
My i-phone cannot connect to my wi fi-all of a suddon. My wife's i-phone 4 is connected to the wi-fi network.
I just tried to connect my daughter's i-phone 5, and could not connect message came up "unable to join the network "Sunday".
My I-pad is connected to Sunday also.
I tried the reset routine, and when I try to get on line, it asks for my password. I put it in and it stll says unable to hoin message.
Can someone help?Reset your network settings. Settings>General>Reset>Reset Network Settings
-
My iphone 4 is runing on ios 7.1.2 and the network appers not to be working....any help
my iphone 4 is runing on ios 7.1.2 and the network appers not to be working....any help
Did you already try the tips mentioned in this article?
iOS: Wi-Fi settings grayed out or dim -
When trying to access my wireless network, get a message "unable to join the network". I tried turning everything off and back on, reset phone, etc. (all of the suggestions under troubleshooting guide). It was working until last night - it suddenly wasn't on anymore and then I couldn't get back on. Any suggestions?
1- try updating your phone (If you can)
2- try reebooting
3- (I know this sounds crazy but) put it in the freezer for a few hours. -
I´m having problems with my wifi an my new Macbook pro. It doesn´t remember the network so every time I log on - I have to "join a network". I have "ticked" the "remember password" box. I´m connecting to a wireless network on an regular Speedtouch router at home. I´m new to Mackintosh.
Try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
In the windows on the left side: Select login for Keychains and "All Items" for Category.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.) -
The WiFi button is not greyed out or dimmed but the phone won't pick up or connect toany of the networks I have previously been connected to. I have updated to iOS 7, reset the network settings but no luck. Any suggestions?
If it's grayed out:
Reset Network Settings - if that doesn't fix it, then Backup and Restore AS A NEW DEVICE.
If it's still grayed out, unfortunately that means your Wi-Fi antenna quit, and it needs service. -
I Have just bought an iPhone 6 and want to restore my iPhone 4s via iCloud backup to the new iPhone 6. The setup of the iPhone 6 halted because according to the new phone it has iOS 8.1.2 whereas the backups were stored using iOS 8.2 following my updating of the iPhone 4S recently. How do I jump through this hoop? How do I update the new phone to iOS 8.2 without serring it up first? Anyone, please help?
Update the new phone to the same version that has been used to create the backup. In your case, the new device has to run 8.2 to be able to use the backup made with the other device.
Setting it back to factory settings will install the newest version and after that you can use the backup made under 8.2
Use iTunes to restore your iOS device to factory settings - Apple Support -
My iOS 7 doesn't include the iTunes Store or App Store
I download iOS 7 & it had the iTunes Store and App Store the. They disappeared when I updated to iOS 7.2. How do I get them back?
Hi there legerhardt,
You may find the troubleshooting steps in the article below helpful.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
-Griff W. -
I received a replacement phone from the Apple Store and since I brought my phone home I can not get it to connect to my network. I've reset the iPhone and reset my home network. Any suggestions?
Hello AriJR,
Thanks for the question, that definitely sounds frustrating. Are you able to isolate the issue further (i.e. does the iPhone connect to other good-known Wi-Fi networks?)
I would recommend following the Wi-Fi troubleshooting assistant here:
Apple - Support - iPhone - Join a network Assistant
http://www.apple.com/support/iphone/assistant/wifi/
For more detailed information/troubleshooting steps, see this resource:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thanks,
Matt M. -
My AX is working but my Windows 7 laptop doesn't recognize the network
My network is through a Verizon DSL modem and a LinkSys wireless router on the top floor of a 3-story house, where there is a Mac in use. Coverage extends to the 2nd story, but not to the first, so wanted an extender. The AX was recommended as better than others at the same price. I downoaded the AX Utility on my Windows 7 laptop, plugged in the AX near the stairwell on the 2nd floor, and configured to join the existing network. Light is green, utility says all is well, but there is only the pre-existing network on my wireless network list, and again it doesn't extend to the 1st floor, so the existing network goes dead as I descend the stairs and there is no other network showing up. Should there be a new network appearing as broadcast from the AX? Did I not configure it correctly? Do I need to configure the utility from the Mac? Any help would be appreciated.
I have Airport Express Model no. A1264, firmware version 7.6, everything looks good, but no internet through the AX
-
IOS 7 doesn't change the lighting bolt icon when iPhone 4s is fully charged
When I connect my iPhone 4s to a plug and it starts charging, I can see a lightning bolt on iOS7 next to the battery, but when it is fully charged it doesn't change to a plug icon as it used to change on iOS 6. Any suggestions? Does it damage my battery?
Well, for the time being (I mean, if Apple does not go back to the bolt/plug icons) if the device shows 100% then it's fully charged.
But feel free to let Apple know that you want it in http://www.apple.com/feedback -
Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.
Hi there,
Thanks for reaching out to the community.
Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.
It appears like you may have a hardware issue with your ringer button and internal speaker that came to light after the update. If you have already restored your iPhone back to factory settings using iTunes, you may need to have your phone serviced.
Some potential good news... Check your headphone jack for lint. There may be enough to cause a muffled connection. You can try to blow it out with compressed air or very carefully pulling out any solid objects that may affect the connection.
Best of luck!
Maybe you are looking for
-
Can I get my Macbook Pro just checked out and tuned up at the genius bar?
I'm having a hard time getting my questions answered. Basically I've had my Macbook Pro for four and a half years, but it's still doing mostly fine. It's just showing it's age slightly I think, with more spinning wheels than usual and odd things like
-
My printer HP Officejet pro 8600 plus makes a lot of noise while printing
My HP officejet pro 8600 plus, makes a lot of noise while printing, ink levels are ok, and printing is ok. it was makiing lines before but not anymore
-
How do you add/change your recovery email to change your security questions?
I literally just want to buy one song and I can't because I don't remember the security questions I made when I was 9...
-
Returning iPhone 4; new SIM card
I returned my phone today and it was simple and quick. Painless, aside from returning the parts of the phone that weren't reception-related, because it is awesome in every other way. Though I was told ahead of time, and I accept it, I will have to bu
-
Hi, When i try to use the AGO function in time sieries i am getting below error. State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 22040] To use AGO function, the storage level of the qu