My i phone is Disabled how doI fix this my sun has been playin with it and lost the code to get in to it

My sun has locked my ph and itsays it s disabled how do I gett the codes to un lock it

If you restore the phone, from backup, on the last computer the phone synced with, this will remove the passcode.

Similar Messages

HT4623 The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back to the main iPad screen. Any suggestions on how to fix this - all software has been updated to iOS 5.1.1 and no other updates are

The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back tot he main iPad screen. Any suggestions on to hoe to fix this? The software has been updated to iOS 5.1.1, and no furthe updates are available.

This is my boilerplate response when app downloads are stalled or in the "waiting" mode. There are a bunch of things here to try.
Tap on the "installing" icon and see if you can pause the install, then tap on it again in order to resume the install.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download and install at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and see if the install resumes.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

How to fix "Your Apple ID has been disabled

Cannot download any app due to "Your Apple ID has been disable"

Apple ID is Disabled - Apple Club
Apple ID- "This Apple ID has been disabled for security reasons" alert appears

Don't know how to fix this - status says no internet connection, yet I'm on the internet.

So this is a weird one.
I got this new MacBook Air and the WiFi started up without a hitch. I had finished migrating from my old computer to my new one and all of a sudden the status bar signal went from full bars to an exclamation point. The info says Alert: No Internet Connection, yet I am on the internet at full speed. Even though I have restarted several times, the status in the status bar remains the same. Since internet is running smoothly, part of me says to forget about it, but it bothers me.
Does anyone have an idea on how to fix this issue without ruining my internet connectivity on this computer?
Thanks!

Migration may have corrupted the network preferences ..
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
/Library/Preferences/SystemConfiguration
Click Go then move all the files in the SystemConfiguration folder to the Trash.
See if that makes a difference.
Your Mac will generate a new SystemConfiguration folder for you.

I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It quits when the Twain portion of the program starts loading. Does anyone know how to fix this so my printer will work with Photoshop??

I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It closes every time it gets to the point where it is loading the Twain portion. Does anyone know how to fix this so my printer and Photoshop will work together? Thanks for any help I can get!

You're welcome.
But, no, don't look to Epson for fixes to their driver in newer versions, and Adobe has deprecated the TWAIN plug-in. Hoping for a solution there is futile. That has not happened and it's never going to happen. The consensus is that it's pretty foolish to tie up Photoshop to scan. Honestly.
Any improvement in the behavior of newer versions of the Epson drivers in that regard would be pure coincidence.
You need to understand that you never, ever scan "within" Photoshop, as Photoshop has no scanning capabilities whatsoever. When you use the Import > Twain plug-in all you are doing is blocking Photoshop while you call up the stand-alone Epson scanning software. If you think about it, its most inefficient.
VueScan has a pretty powerful scanning plug-in that can be called from the Impost menu—if you insist. VueScan is not free, but it's a pretty good value, IMO.
As for the Epson CD printing software, I have no clue. Sorry.

I have Windows XP,Firefox does not recognize my Adobe flash player.How doI fix this.

I have the latest version of Adobe flash player,It works with IE,it will not work with Firefox.It will not download flash player,because it is already installed,How do I get to work with Firefox?Thank you for your time.

There are 2 versions of Adobe Flash:
*an '''ActiveX version''' for IE only
*a '''Plugin version''' for most other browsers including Firefox
*On a Windows system, you should always update both individually.
'''''You do not appear to have the Plugin version for Firefox installed. ''''' If you did, in Add-ons > Plugins you would see "Shockwave Flash ''(version)''". If "Shockwave Flash" is there and is disabled, click the "Enable" button.
Check your Plugins often --> http://www.mozilla.org/en-US/plugincheck/
*only the most popular/used Plugins are known by this page
*page will detect only installed, '''''enabled''''' Plugins
'''Install or update Adobe Flash''' 
#'''Using Firefox''', go to the following link and SAVE the download to your desktop so you can find it later. Un-check any items on that page that you do not want to download (i.e., "McAfee Security Scan Plus":
#*http://get.adobe.com/flashplayer
#When the download is finished, close Firefox (File > Exit '''''OR''''' Firefox button > Exit)
#Click or double-click on the file you just saved to your desktop
#*In the installation window that appears, click the box to the left of "I have read and...." to place a check mark in the box
#*The "Install" button in the lower right corner will now be highlighted, click it.
#*The installation is quick.
#Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
#To update/install the ActiveX version for IE '''''only''''', repeat the process, '''but use IE to go to the above website'''.
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]'

How to fix window boot manager has been blocked by the current security policy on acerv5window 8.1

Hi.. When do you xactly get this error message?Are you trying to boot your computer using a cd?Are you trying to load another operating system? Secure Boot is a feature designed to prevent malicious software and unauthorized media from loading during the boot process. This option is enabled by default, but can be turned off in UEFI / BIOS. Select your Windows 8 device and use the following steps to change the Secure Boot setting:Completely shut down the computer.Power on the system. As soon as the first logo screen appears, immediately press F2 to enter the BIOS.Use the right arrow key to select Security.Use the down arrow key to highlight Set Supervisor Password and press Enter.Create a password and press Enter. Retype the password to confirm and press Enter again.Use the right arrow key to select Boot.Press the down arrow key to select Secure Boot and press Enter.With the arrow key, highlight Disabled and press Enter.Press the F10 key and select Yes to save the changes and exit the BIOSWe suggest removing the supervisor password immediately after enabling Secure Boot. If you choose not to remove your supervisor password, make sure you write it down for future use.

I fixed this issue when I realised I had set a passoword many months ago when I was in Windows 8.1 If you found that your BIOS is locked, use a password you've used for other 'important' things. Cheers, Dave I have an Acer Aspire E1-571 I'm having the same problem - however when I press F2 it goes to a blue security box saying: Enter Current Password: I don't have a password. It was set by the factory, I bought it new. How do I get around this. The last hard drive is trapped - I can't fix it, even with Microsoft's chat help when they accessed my computer remotely.I bought a new hard drive, and have the Windows 7 Professional DVD in the drive - but it can't access it under the current Security Settings - only to find it has a Password - thus my visit to this forum today. Any help you can offer would be gratefully accepted.

Help I cannot get on to itunes. It comes up with the message that msvcr80.dll is missing. But i need very straight forward instruction s how to fix this as I am not good with computers.

Help I can no longer access my I tunes from my computer. It comes up with the message MSVCR80.dll is missing. Can anyone give me very simple instructions as to how i can fix this. I am not very computer literate.

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?

TS1702 how to manage this. apple ID has been disabled.

my apple ID has been disabled and i can not install an application.

Go to "Manage Your Apple ID" here:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

I can't view photos on the HGTV site. How doI fix this so I can?

I have always been able to view photos and video on my browser; however, for the last several months i cannot view photos on some websites. HGTV for one.

Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

After downloading the update ios7 my moms phone has been locked with a four digit security code that she didn't have before the update. So she is locked out of her phone. How do I get rid of the four digit code

HOw do I unlock the phone if there was never a lock code on there before the update?

Yep. Same here. There's a NEW feature in iOS7 for Find my iPhone. It requires a passcode. My wife never had a passcode and doesn't have her computer to restore the backup.
Spent an hour on the phone with customer service last night trying to restore the phone to factory settings but it didn't allow us access.
Right now we have a 9-month old brick sitting on the table.
Who in their right mind decided to release this feature that requires a passcode without checking first to see if the user has a passcode?
I was not really polite to the support staff last night on the call but the person was very professional. Kudos to how he handled my call but this is just stupid. So Microsoft-like, so un-Apple-like.
This feature with this iOS rollout is a big failure and my wife, who didn't want an iPhone until she got (and loved it) but is now out looking for an Android device. Apple has lost a customer that they had only recently won over.
#epicfail

How to separate a letter when has been cut with the scissors tool?

I have a project where I need to cut a letter to make a new letter . I used the scissors tool to cut the letter that I wanted and I used the direct selection to try to separate the letter from the other part and it wouldn't separate. What should tool should I use to separate the letter?

Screen shot would be helpful here...

I delete an individual message but the time I received the message is still showing next to the persons name in my inbox instead of going back into the correct date/time order. Anyone know how to fix this?

I delete an individual message but the time I received the message is still showing next to the persons name in my inbox instead of going back into the correct date/time order. Anyone know how to fix this?

SOLUTION
Open "terminal" on your mac and type the following:
defaults write com.apple.mail IgnoreSortOrderWhenSelectingAfterDelete 1
(copy and past the whole line)
This will stop that behaviour in mail.
It works on most opperating systems.
mine is.
Mac OSx 10.7.2 Lion
Cheers

While syncing my I phone it gets to step six "optimizing " and gets almost to the end and I get a message that itunes has stopped working and has to close. it get to like 1074 of 1138 items to optimize when iTunes quits. Any suggestions on how to fix this

While syncing my I phone it gets to step six "optimizing " and gets almost to the end and I get a message that itunes has stopped working and has to close. It get to like 1074 of 1138 items to optimize when iTunes quits. Any suggestions on how to fix this?

Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

Slide to unlock doesn't work happend more than 8 time every time i had to restart my phone, Please can you tell me how to fix this bug . iPhone 5, iOS 7.0.4

Slide to unlock doesn't work happend more than 8 time every time i had to restart my phone, Please can you tell me how to fix this bug .
iPhone 5, iOS 7.0.4

Backup and restore your software via iTunes. If the problem continues, restore as a NEW device. If this solves it, that means there is some corruption in your backup file. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.

My i phone is Disabled how doI fix this my sun has been playin with it and lost the code to get in to it

Similar Messages

Maybe you are looking for