My i phone just stopped working

help my iphone just stopped working when i tried to move from vibrate to ring......can anyone help?

Reset, hold both the Home and Power buttons for about 15 seconds, until the iPhone restarts.

Similar Messages

  • Phone just stopped working...

    The earpiece stopped working. I've never dropped it. It's been in my pocket all day...I used it this morning fine...then tonight it stopped working. People can hear me but I can't hear them unless I put it on speakerphone. I can't even hear the ringing but the call does actually go thru. I can't explain how frustrated I am that a $600+ phone...would just stop working as a phone. Should I take it to ATT or Apple? Can they do anything about it/they better do something about it.

    I am having the same problem too
    1. Have no plastic thingy on the ear piece
    2. Did a factory reset from i-tunes and from the phone
    3. Have had the phone for about a week...
    4. Pulled out the thingy to the headphone jack 3 times
    5. Still nothing.
    6. Called AT&T to get a credit for the 50 calls I made that didn't go through
    7. My Apple i-phone is a Lemon
    8. What the #$%^&@
    Its a software glitch could even be hardware (but) when I did the reset from the settings/general/reset/reset all settings it worked for two calls... After that it went back to the above....Could be SIM AT&T said...Time will tell...will have to go to the Genius Bar and bring in my lemon for my smart serving....
    The apple team must be working on a solution that will fix it....

  • My i-phone just stopped working. It has coloured vertical bars on the screen. I can't even shut it down

    My i phone stopped working . There are vertical bars on the screen . I can't do anything with it and it isn't even possible to shut it down

    Hi christinehedden,
    If you are having an issue with your iPhone being unresponsive and showing vertical bars on the display, I would suggest that you troubleshoot using the steps in this article - 
    Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
    Specifically -
    If you see lines, missing sections, discoloration, or poor image quality
    Try to restart your device. If you can't restart, reset your device.
    If restarting or resetting doesn’t fix the issue, restore your device.
    If you still see the issue after you restore, contact Apple Support.
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • HT201263 What can I do when my phone just stopped working?

    My iPhone decided mid-message to turn off (even though on 100%) and came back on to the Apple start-up screen.
    It continues to light up, then fade out, then light up again etc. I cannot get on my phone, so I cannot restore it. What can I do?

    Plug it in to power.  If it doesn't automatically come on within 15 minutes, try a Reset... press the home and sleep/lock buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    If this doesn't work, you likely have a hardware issue.

  • Phone just stopped

    My phone just stopped working. It has a charge, I just finished using it, put it down for a few minutes and picked it up to check email and screen was black/blank. I plugged it in, nothing buttons won't work, it's just dead?! Any suggestions

        Hi Patipt2000!
    I know how important it is to have a working device, so let's get that phone up and running! Please try this and let me know how it goes:
    http://vz.to/1a8wZta
    Keep me posted, thanks!
    ChristinaB_VZW
    VZW Support
    Follow us on Twitter @VZWSupport

  • My charger just stopped working. The cord has no visible damage and the plug box works fine with other phone cords. I've had my phone

    My charger just stopped working. The cord has no visible damage and the plug box works fine with other phone cords. I've had my phone for less than four months now. Will Apple provide a new charger if theirs is faulty? I have not dropped it in water or anything. It was a normal day and I had 20% battery and I tried to charge my phone and it wouldn't charge. The charging pug box works fine with other phone USB cords so I know its something to do with the charging cord.

    Eklms wrote:
    My charger just stopped working. The cord has no visible damage and the plug box works fine with other phone cords. I've had my phone for less than four months now. Will Apple provide a new charger if theirs is faulty?
    Yes.
    Everything is included in the warranty.

  • My home button just stopped working, the white mark isn't red so it isn't water damaged. could i replace the phone for free? i just got this phone a week ago

    my home button just stopped working, the white mark isn't red so it isn't water damaged. i did get it wet but i put it in rice as soon as i could and dryed it off as much as i could but it still hasn't turned red and the button still isnt working. could i replace the phone for free? i just got this phone a week ago

    No water damage will show up to Apple you have voided any warranty you may have

  • My imessage has just stopped working with one of my contacts, on both of our phones imessage still works with other contacts. Why can we imessage others but not each other?

    My imessage has just stopped working with one of my contacts, on both of our phones imessage still works with other contacts. Why can we imessage others but not each other?

    Yes... to no avail

  • My iphone 5 speakerphone just stopped working today while on the phone?  whats going on?, My iphone 5 speakerphone just stopped working today while on the phone?  whats going on?

    My iphone 5 speakerphone just stopped working today as i was on the phone.  i have tried to use it, and it doesnt work.  THis really stinks because now im completly unable to video chat and do other things.. please help!!!

    Booked into the Genius Bar at the Apple store in the Manchester Arnedale shopping centre and arrived on time today.
    The staff asked if I had backed it up, which I responded that I had. I also explained that I had been on the forums and followed some of the advice.
    My iphone 5 was only 7 months old and still under warranty, so I should have expected excellent service, and I got it. The phone was repaired by the store and returned to me approximately 30 minutes earlier.
    Happy days.

  • Why am I facing so many problem after upgrading to ios7, my phone hangs/stuck many times, applications just stop working and close themselves, battery drainage,Facebook and all applications don't work properly. What should I do? They punished me for upgra

    I'm using iPhone 5
    Why am I facing so many problem after upgrading to ios7, my phone hangs/stuck many times, applications just stop working and close themselves, battery drainage,Facebook and all applications don't work properly. What should I do? They punished me for upgrading to ios7. I now hate apple and I'm thing of getting samsung.

    Basic troubleshooting
    Reset
    Restore with backup
    Restore as new ( better )

  • HT201365 i forgot my pass code my home button doesnt work i cant restore because find my phone is on im frustrated and out of solutions my home button just stopped working today and it has just been one issue after another this morning help help help

    i forgot my pass code my home button doesnt work i cant restore because find my phone is on im frustrated and out of solutions my home button just stopped working today and it has just been one issue after another this morning help help help

    If you are unable to restore your iPhone with iTunes without having to enter the passcode, you will not be able to update your iPhone's backup. You will need to place the iPhone into recovery mode in order to restore the iPhone with iTunes and you can restore from the most recent backup available.
    http://support.apple.com/kb/ht1808

  • Can't open a dng or raw file in cs5, just stops working. So many problems in cs5!

    I totally feel for you. Just upgraded from cs4 to cs5 and it was the  biggest mistake i ever made. It will probably end my livelihood as a  photographer since EVERY time i open a raw file it crashes photoshop,  makes it freeze up after i have adjuted the file in camera raw then I  hit open; i get a few bars then it just stops working.
    Even got  tech help, which helped when i was on the phone with them. The next day  the problem came back even when I danced the same jig that I did when I  had the guy on the phone - he had me move a raw file on to the desktop  rather than take open from my hard drive, then I was able to open it, so  we came to the conclusion that my drive was corrupt. I had the same  information backed up on a brand new hard drive so we compared files  from the each drive against the other. The files from the new drive  opened successfully. Yesterday. Now Photoshop cs5 doesn't open any raw  or dng files at all from anywhere so it can only be a problem with  photoshop. We thought we had the problem solved but we did not. This  never happened on CS4 unless i was trying to open 30 or more raw files,  and even then it gave me a warning that it had no more ram, it didn't  just lock up and do nothing. I'm at my wit's end. Even though there are a  lot of great new things in cs5, they aren't very useful if you can't  use the product to do the simplest thing.

    1) Install the Photoshop 12.0.1 update
    2) Install the latest ACR update.
    If problems continue after that, then there probably is something wrong with your system.

  • My lock button doesn't work. It didn't break, it just stopped working

    Ok. So apparently during a workout outside, my brand new, month old iPhone 4S decides it wants to workout too. So I brought it to my workout, put it in a backpack, and set the bag down as I normally do. The dew on the grass that morning apparently casused enough condensation to trigger my litmus paper, and now my brnad new iPhone has no warranty, hence my question here. I have been searching for a week or 2 now on information for this, and can find nothing. Apple will do nothing but tellme they can replace the phone for $200 but then won't wanswer questions about the issue itself, and I seem to be the only iPhone owner in the world with this problem, so it's nowhere on the intarwebz.
    So my lock button, up top, on the shoulder, stopped working. It didn't break, it didn't get stuck down, it just stopped working. Like, the screen flashed (go to wake the phone up, it didn't wake up, so I pressed the button again, and it flashed on and then off again real quick, like normally would). Hit it again, nothing. Hit the Home button, woke up. Played with phone, etc, went to put to sleep...... nothing. Hit the button multiple times, nothing. Button still clicks down and functions as the button itself should, but no sleep or wake. The button only actually does what it's supposed to do when I hard reset, or the phone is off and I'm turning it on. I can't take a screenshoot of the phone, and every now and then my phone will be just sitting on the table or wherever, and it will wake up, the "Slide to Close" bar pops up, and then 15 seconds later, goes back to bed.
    Has anyone else experienced this issue, and what should I look at fixing inside? I have not taken this one apart yet as I don't have the tools anymore, waiting on them to get here, but I figure Apple has screwed me on my warranty, so I'm just going to fix it myself. Never had this specific issue before, so I'm not really sure what the **** is messed up until I can take a look inside. Any help until then would be wonderful. Sorry for the long back story, and thanks for looking.

    Your problem is rare from the symptoms you describe. Most lose the click function, yours still has it. Yours functions sporadically or only for certain functions. Maybe it is liquid damage causing this. Maybe it will dry and be OK.
    While waiting for your Pentalobe Screwdriver, try a Firmware Restore with iTunes. See if this helps. If you still decide to procede, the first step inside should be to carefully disconnect the battery at its connector. Also all the screws inside are different sizes, except for some of the Screen screws, so keep them well sorted.

  • CS6 just stopped working last night.

    PS CS6 Extended  just stopped working over night and so has my version of CS5.1. I have a trial of CS6 Master Suite going and they are all dead too, and no the trial isn't over.I don't even get a flash screen.  Actually I got bridge to open and it asked me to install ACR6.7??? I have  LR 3&4, Element/Premiere 10 and they are fine. I have wiped my MAC twice with the CS cleaner and have spent the entire day on chat help and the phone. Nothing is working, any ideas?
    Oh and NONE of them will recognise my camera, it's just plain bizarre
    Message was edited by: weatherfreak
    Oh I have a MacbookPro Early 2011, 8GB Ram 1333Mhz DDR3 , i7 intel core 2.3Ghz, 750MB HD and 4TB external HD. I had noticed how slow it's been running lately too

    I suggest you try a factory reset of the hub
    http://bt.custhelp.com/app/answers/detail/a_id/113​86/~/how-do-i-reset-my-bt-home-hub-to-its-factory-​...
    If you found this post helpful, please click on the star on the left
    If not, I'll try again

  • Anyone having issues syncing iPhone with Microsoft Outlook 2007?  iTunes says it is syncing but it will not update calendar or contacts.  It just stopped working a few weeks ago.

    Anyone having issues syncing iPhone 3GS with Microsoft Outlook 2007?  iTunes says it is syncing but it will not update calendar or contacts.  It just stopped working a few weeks ago.

    I'm glad to hear that I'm not the only person struggling with exact issue.  I've rebooted, upgraded, re-installed, pulled all my hair out as nothing works.
    The biggest dissapointment with this thread is that nobody seems to have responded with a solution.
    And yes I've managed to pull together enough intellegence to tick the box "sync to outlook" in iTunes - still nothing man.
    Definately does not sync from phone to PC and is very hit and miss on PC to Phone.  In other words now running 2 seperate calendars - Not helpful Jan.

Maybe you are looking for

  • Problem with display of images in applets

    Hi all, When I run this program, the appletviewer window is showing no output (i.e. no image). I'm using the netbeans IDE 5.0. Blue hills.jpg is present in both the src folder and build folder. * <applet code="image" width =800 height=600> * <param n

  • Workflow - Not able to stop at the breakpoint, how to debug?

    Hi, I am working on solving a workflow problem, but i am not able to stop at the breakpoint put on the function module called through the program. I am sure that the function module is called through the workflow. please tell me why is it not stoppin

  • Rotating mask not working

    Hi, getting very frustrated as i cant see what the problem is I have two layers, the bottom layer is a graphic, above it i have a group which consists of an outline of a circle and then a segment of the circle. I've set a motion tween and set it to r

  • Reports being blocked

    Is there any way to get the default filename for iTunes U reports modified?  The extra period is causing my security software to kill my ability to get the report.  I'm seeing this: Attachmentfile : aug.edu-2011-04-10.xls\1.OLE ScannerDetected: Suspi

  • What are Siebel Bars?

    Hi there, I was hoping someone could explain what Bars are, in the context of Siebel? I'm just doing some reading around Siebel for a project, and came across the term. Haven't been able to find out what it means. I assume it just refers to a single