My i phone wont do anything only says connect to itunes what do i do
yes only saying connect to itunes doesnt do nothing what should i do
Connect it to iTunes on your computer and follow the prompts
Similar Messages
-
My phone keeps shutting off and saying "connect to iTunes." So I did and nothing happened. it says to restore it but I want to keep all my messages and photos etc i just want it to turn on so i can sync it and then ill restore it. sometimes the screen stays black but the light will come on or it will just keep restarting. please help
Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H. -
Attempted to download new ios 8.2 software, I can't use my phone now as it is saying connect to iTunes?! So I connected to iTunes and it isn't doing ANYTHING.
THIS IS CRAZY!!! Apple - GET YOUR CRAP TOGETHER!! Don't release an update if it isn't ready!!!!I just had my phone 5c screen replaced and it was working fine until I tried updating it 30 mins later, I was getting error messages and couldn't move past the Apple logo. so when I tried a factory restore I get a message saying It cannot restore or update my phone. Now my phone is stuck on restore mode screen and cannot load anything. I've tried restore on multiple computers and updating to latest itunes versions. Anyone know whats going on?
-
I have locked my iPhone 5 and forgot my password . Phone is disabled and is saying connect to iTunes ! I have tried but never did I synced my phone to any computer but when installed used iCloud how do I get it back on???
See here
http://support.apple.com/kb/HT1212 -
HT201210 my phone a pic of a usb cord and it say connect to itunes what do i do
my phone keep showinga usb cord and saying connect to itunes what do that mean
It means you should connect the phone to iTunes on your computer. The phone has detected data corruption on the phone, so you need to restore it using iTunes.
-
My iphone 3g is stuck on the apple logo and wont even turn off, or connect to itunes. what do i do?
My iphone 3g is stuck on the apple logo and wont even turn off, or connect to itunes. what do i do?
I've got the same problem.
I wanted to download the new itunes version for iphone but it got stuck. I had no choice but disconnecting my iphone. Then I couldn't sync it anymore.
I switched off my phone by holding down the sleep button but it has never successfully switched off. The round thing still turns.
I've tried to connect it back to the itunes. This is the error message I get: itunes can't connect to the iphone. Code 0xE8000065. I tried to find out what error message this is but the apple support site I saw didn't mention this error code.
Can anyone help? Thaaanks! -
HT1430 i erase my device it says connect to itunes what do i do next
i erase my ipad and it keeps saying connect to itunes what do i do next
Connect it to your computer with the cable and launch iTunes - do exactly what it is telling you to do. You must set the device up again using iTunes since you erased it.
-
Ineed help fixing my iphone it is disabled and says connect to itunes..i downloaded itunes on my labtop to do so but dont know the steps to take after i down load itunes and connect to itunes from my labtop
Did you connect it to iTunes? What happened?
-
I reset my phone now no service and says connect to itunes and nothing happens
i reset my iphone4s and now it says connect to itunes and nothing happens have no service either
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
my phone 4s is locked and I cant unlock it unless I connect to ITunes but when I connect it, it doesn't work.
what do I do ?Have you tried any troubleshooting?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
Restore: Connect your iPhone to iTunes on your computer, backup, and then select Restore to Factory -
this iphone has been connected to this computer. i really need help can anyone help me out.
i am signed in with my apple id to the itunes account on this computer.See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4
Note: All content will be Erased -
i have error when i connect to itunes
C Mawle wrote:
Thanks. I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
Yes it would, possibly even brick it.
Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
Can I use my ipod nano USB connector to check?
It is not much help to you, since the device that you need still not recognized.
Anyway looks like I may have to swallow the loss of data. Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
Good luck, but if you expect miracle from that call good luck again. -
what can I do to enable my ipod touch?
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
My iPhone4 will not come on. When i plug it into the charger, it only says connect to iTunes. When I tried restoring it, it said my iPhone4 could not be restored.
Try this
http://support.apple.com/kb/HT1808 -
What to do if it says connect to itunes to configure?
I removed the battery, and my phone went dead,,,now it says "connect to itunes to configure" what should i do?
Does the iPod connect to other networks?
Do other devices now connect?
Did the iPod connect before?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
No signal from my computer to TV or Projector through HDMI
When I tried to connect VGA cable to the HDMI Cable that came along with my notebook, I am not getting the display either on TV or on projector
-
Throw exception in Java mapping and handle this in BPM
Hi, I'll use a Java mapping in a BPM transform step. Is it possible to throw an exception inside this Java mapping and handle this in a BPM exception handler? thanks and regards Verena
-
I have CCX 5.0.2 with CUCM 6.1.3. I find some strange problem. 20% of all calls are disconnected after 1 second. Client call to CCX, listen IVR and then become connected with agent. And after 1 second call is disconnected. In log I see that reason of
-
Is there way to auto-center layers? I type "auto" , but it does nothing? please advise...
-
6300 download saved messages to Outlook for iphone...
We are about to start to use iphones, and I need to download all contacts to Outlook. My question is that does the software also allow you to download messages as well? thanks in advance. PS - if anyone has any suggestions on how to do this easily,