My i phone4s network lost while calling on airtel 2g network on 3g working good.

my i phone4s network lost while calling on airtel 2g network on 3g working

Are you just here to tell us that Airtel has lousy 2G coverage in your area or do you have a question?

Similar Messages

I use iPhone 4S .earlier with ios 6 and now ios 6.while I connect the charger for charging my phone network lost while midway in charging.that problem always while 3G connection is active.but this problem not arise while 3G mode off.please help me.

I use iPhone 4S .earlier with ios 6 and now ios 6.while I connect the charger for charging my phone network lost while midway in charging.that problem always while 3G connection is active.but this problem not arise while 3G mode off.please help me.

reset all settings
settings-general-reset-reset all settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
if issue persists back up and restore as new via iTunes
Peace, Clyde

Characters getting lost while calling a remote function

Hi there,
I've got a problem concerning a remote function call.
Situation: System A has a function module ZFM_X with one importing parameter ("text" type string).
System B calls this function module ZFM_X through a remote function call.
It passes a string (containing 521 characters) variable to the importing parameter "text".
Unfortunately, only fragments of the imported text arrive in System A.
The text arriving in System A has the following pattern: The first 256 are correct, following 256 white spaces(blanks) following the last 9 characters of the imported text.
Example:
This is sent by System B to System A through a String variable.
http://xxx.xx.xx.xx:xxxx/servlet/ContentServer?get&pVersion=0046&contRep=PG&docId=4BB4C36F5A0200B9E1008000AC101219&accessMode=r&authId=CN%3DP60&expiration=20100420112054&secKey=MIH3BgkqhkiG9w0BBwKggekwgeYCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGBxjCBwwIBATAZMA4xDDAKBgNVBAMTA1A2MAIHIAgIKARFNDAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMTAwNDIwMDkyMDU0WjAjBgkqhkiG9w0BCQQxFgQUItgHQiYkW9BkScWnoMPkZiuCGSMwCQYHKoZIzjgEAwQuMCwCFGPGseHQSPV2%2F75OVMF2yMFzwfTLAhQgPRMvivyuii4gZ%2BJSKonPRsF1XA%3D%3D
At System A the following text arrives
http://xxx.xx.xx.xx:xxxx/servlet/ContentServer?get&pVersion=0046&contRep=PG&docId=4BB4C36F5A0200B9E1008000AC101219&accessMode=r&authId=CN%3DP60&expiration=20100420112054&secKey=MIH3BgkqhkiG9w0BBwKggekwgeYCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGBxjCBwwIBATA 1XA%3D%3D
It definitely looks like a unicode problem. Oddly, we have another system constellation which is exactly the same as System A/B where we are doing this, and its working perfectly fine.
I hope you are not stunned by this wall of text, but any help is totally appreciated!
Edited by: Erik Nagler on Apr 20, 2010 11:54 AM

Hi,
I tried it with String type and Character type (CHAR1024).
Both dont work.
As far as the unicode test is concerned:
Sysem A is a unicode System whereas System B is a non-unicode system.
I tried to change the Radiobutton to "unicode" in sm59, but I can't.
It is uneditable, even though I am in change mode.
[>>Picture<<|http://img90.imageshack.us/img90/2006/unicode.png]

Lync to Lync calls not working when users outside of network. But calls from Lync to external numbers do work.

Hello,
We are having the following issue: when our lync users are outside of our network, just connected to their home internet or a public WiFi and not on VPN, they cannot place calls to other
Lync users inside our network. They get a poor network connection message on the call window. But they are able to make calls from Lync to external numbers without a problem.
Inside our network, Lync to Lync calls work perfectly fine, the same for calls from Lync to external numbers.
Does anybody know what could be the cause of our issue? Perhaps I'm missing a setting on our Edge server. What should be the first thing I should check on my Lync servers?
Thanks for any help!

Have you opened up ports on your firewall from your internal clients to the edge on UDP/3478 and TCP/443? This sounds like you might have a problem there. Can you internal clients properly route to this subnet and resolve the pool name of your
edge pool?
Ports and protocols poster, check out in A/V section client traffic to edge showing UDP/3478 and TCP/443:
http://www.microsoft.com/en-us/download/details.aspx?id=39968
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

While calling on Facetime , it does not connect , it says connection lost

While i calling on facetime, it does not connect , it says connection lost all the time

After trying everything, here,s what worked to me: go to settings - facetime, and when it asks how you want to be reached on facetime, uncheck the icloud email option. Hope it works!

Speakerphone problem - lost voice from speakerphone while playing music or gaming youtube, while call or voice recording playing - all works fine, so speakerphone is working but not on all apps. hard reset done - no changes

or gaming youtube, while call or voice recording playing - all works fine, so speakerphone is working but not on all apps. hard reset done - no changes.
iphone 4
SOLVED plugin to charger solved it - so problem was with contacts -- no idea why - phone is new - no water - no havy dust - usual using
hope will never return. Thanks

We checked it with an iPhone 5 in house multiple times and could not reproduce this Problem. Must be something specific to your device. Maybe your speakerphone volume is turned down completely?
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Network lost - Can't make phone calls, texts etc

Please help
I have an iphone 4, and over the last week I have had a problem pop up that says "network lost" and how I need to choose another carrier. I have done all suggestions to solve it (reset the network, turn on 3G etc etc) but nothing has helped.
I'm with orange EE and not only was the signal bad before but now I have basically no phone.
To solve the issue I borrowed another iphone 4 off of a friend, and after 4 days or so of having it, on the train back from London today it began to get "No Service" and "Searching..." and now I get the same pop up?
Please can someone help me solve this, before I change my network and switch to Samsung!!!!!!!!

You can try a hard reset by holding down the home button and the lock button at the same time until the apple appears. If that doesn't work I think you should definitely go into an apple store.

My 3GS iphone always go into 'network lost'!

my 3GS iphone is constantly going into network lost and 'no service'. Each time that happens, I have to go through a lengthy process of re-starting the phone which is painful! Additionally, the call drops while i am on conversation. My colleagues always complain that they cant call me the first time because the phone appears to be off but get thru after the subsequent attempts.
I checked with my service provider (Celcom) and they said there is no problem with its setting. I checked with the other service provider that I bought the phone from (Maxis) and they said that there is nothing wrong with the phone as well. I am lost.
I am a heavy user of data (I hv data unlimited package). My Yahoo msg and other online applications are turned on most of the time. I am not sure why I continue to have this problem. Recently, thinking that the service provider coverage could be bad, I changed the phone, but for a week, but I never had such problem.
Anyone faced similar problems and is there a solution for this? Thanks much

Hi newyorker2014,
I apologize, I'm a bit unclear on the exact nature of your issue. If you are no longer seeing the app in question on your iPhone, but it is showing as purchased on the App Store, you should be able to redownload it directly. You may find the following article helpful:
Download past purchases
http://support.apple.com/kb/ht2519
Regards,
- Brenden

Wi-Fi connection lost while using anything but safari

hi everybody. I am using an iPad 4 in my home Wi-Fi environment (amongst iMac & iPhone). When I browse with safari, everything works fine, always. But when I use the youtube app, for example, the iPad looses the WiFi connection after a short while/few minutes. I have to manually re-activate my network choosing it from the list of available networks, which works, again, only for a few minutes. Then it's like Groundhog Day every few minutes and the problem starts over again.
Curious: the connection is never lost while surfing the internet with safari or factime.
And - I don't ever have trouble with the iMac and non-apple laptop using the same Wi-Fi. This leads me to believe the WiFi-environment is stable. Since the iPad works fine while using Safari it seems like the iPad itself disconnects from my WiFi, and reconnects again when opening/using Safari. It feels like the iPad decides it is not neccessary to be connected to WiFi while using youtube-app and disconnects, but reconnects when using safari.I repeat myself.... I am frustrated!!!
Looks like a settings or software issue to me, but I out of solutions?
I tried the obvious:
- iPad software is up to date
- tried turning everything off / on (router, iPad...), restarted.
- went to the apple store, they gave me a new iPad, still the same trouble...
Anyone able to help?
thnx

I suspect that the problem is in your router. Do NOT consider your router to be blameless if some other devices seem to work with it.
Try restarting your WiFi router by removing power for 30 seconds. Don't just turn it Off. On many routers that doesn't really do anything but put the router into standby mode. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
There is a chance that some services turned on in your router could be causing problems. Look for a setting called QoS (Quality of Service). If ON turn it OFF.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured.
See also here: http://www.apple.com/support/ipad/wifi/

An internal error occured while calling 'processDPCommandsEx' API. (Error: ERR_WIS_30270)

Hi ALL,
I am facing a wierd issue while opening/refreshing/broadcasting a webi report.
The error message scrnshot:
This error is not throughout the reports, but for specific reports only, when checked the Bex query definition it works fine, but gives error for Webi reports.
Recently we had upgrade of BO 4.0 SP7 patch 9.
The reports are directly built on Bex queries, Bex queries contains simple Structures and few CKF's.
Would be thankful for any help recieved in resolving the above issue.
Regards,
Jaywant Kulkarni.

Hi jaywant,
Please check the note: 1760827 it may be helpful
( An internal error occurred while calling the 'processDPCommands' API. (ERR_WIS_30270) due to some scenarios.
Scenario 1:
Error occurs when try to refresh a migrated Web Intelligence report in InfoView, after entering a date or dates for prompts.
Suggested Solution:
Modify problematic report in Webi.
Change the prompt definition to be a constant, run the report in Webi, and save it.
Change the prompt definition back to prompt with required date definition. Make sure you are using the correct date format! (The report prompt should tell you what the format is supposed to be.) Re-run the report in Webi, and save it.
Re-open the report in InfoView and refresh.
Scenario 2: Error occurs when trying to edit the properties of a Webi report containing merged dimensions.
Suggested Solution:
Remove the merged dimensions and then re-establish them.
Scenario 3: Error occurs when the InfoView report has been open and idle for a long time.
Suggested Solution:
This error can be an indication of a time-out, based on the server’s settings. Make sure you save your work often. You will need to close and re-open the report when you get this error, and you may have lost any unsaved changes.

WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
but that didn't gain me anything.
I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
PowerShell Error:
Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
winrs Error:
Winrs error:
WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.

Hi Adam,
I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
WSMAN/<NetBIOS name>
WSMAN/<FQDN>
If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
this to learn a bit more about selective trusts and whether or not it's affecting you.
Cheers,
Lain

Error while calling /forms/frmservlet

Hello all,
After a fresh installation of Weblogic/Oracle Fusion Middleware 11g , I get the following error in the java console while calling the forms/frmservlet : http://test.corp:8090/forms/frmservlet
Java Plug-in 1.6.0_18
Verwendung der JRE-Version 1.6.0_18-b07 Java HotSpot(TM) Client VM
Home-Verzeichnis des Benutzers = C:\Documents and Settings\user
c: Konsole löschen
f: Objekte in Finalisierungswarteschlange finalisieren
g: Speicherbereinigung
h: Diese Hilfemeldung anzeigen
l: ClassLoader-Liste ausgeben
m: Speicherbelegung anzeigen
o: Protokollierung auslösen
q: Konsole ausblenden
r: Richtlinien-Konfiguration neu laden
s: System- und Bereitstellungseigenschaften ausgeben
t: Threadliste ausgeben
v: Thread-Stack ausgeben
x: ClassLoader-Cache löschen
0-5: Trace-Stufe auf <n> setzen
basic: Fortschritts-Listener hinzugefügt: sun.plugin.util.GrayBoxPainter$GrayBoxProgressListener@1808199
network: Cache-Eintrag nicht gefunden [url: http://test.corp:8090/forms/java/frmall.jar, Version: null]
network: Verbindung von http://test.corp:8090/forms/java/frmall.jar mit Proxy=DIRECT wird hergestellt
network: Verbindung von http://test.corp:8090/ mit Proxy=DIRECT wird hergestellt
java.io.FileNotFoundException: http://test.corp:8090/forms/java/frmall.jar
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.plugin.PluginURLJarFileCallBack.downloadJAR(Unknown Source)
at sun.plugin.PluginURLJarFileCallBack.access$000(Unknown Source)
at sun.plugin.PluginURLJarFileCallBack$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.plugin.PluginURLJarFileCallBack.retrieve(Unknown Source)
at sun.net.www.protocol.jar.URLJarFile.retrieve(Unknown Source)
at sun.net.www.protocol.jar.URLJarFile.getJarFile(Unknown Source)
at sun.net.www.protocol.jar.JarFileFactory.get(Unknown Source)
at sun.net.www.protocol.jar.JarURLConnection.connect(Unknown Source)
at sun.plugin.net.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
at sun.plugin.net.protocol.jar.CachedJarURLConnection.getJarFileInternal(Unknown Source)
at sun.plugin.net.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.access$600(Unknown Source)
at sun.misc.URLClassPath$JarLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.misc.URLClassPath$JarLoader.ensureOpen(Unknown Source)
at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
at sun.misc.URLClassPath$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getResource(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.plugin2.applet.Plugin2ClassLoader.findClassHelper(Unknown Source)
at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
network: Cache-Eintrag nicht gefunden [url: http://test.corp:8090/forms/java/frmall.jar, Version: null]
network: Verbindung von http://test.corp:8090/forms/java/frmall.jar mit Proxy=DIRECT wird hergestellt
network: Cache-Eintrag nicht gefunden [url: http://test.corp:8090/forms/java/oracle/forms/engine/Main.class, Version: null]
network: Verbindung von http://test.corp:8090/forms/java/oracle/forms/engine/Main.class mit Proxy=DIRECT wird hergestellt
network: Cache-Eintrag nicht gefunden [url: http://test.corp:8090/forms/java/oracle/forms/engine/Main.class, Version: null]
network: Verbindung von http://test.corp:8090/forms/java/oracle/forms/engine/Main.class mit Proxy=DIRECT wird hergestellt
basic: Laden: Klasse oracle.forms.engine.Main nicht gefunden
Laden: Klasse oracle.forms.engine.Main nicht gefunden
java.lang.ClassNotFoundException: oracle.forms.engine.Main
at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed:http://test.corp:8090/forms/java/oracle/forms/engine/Main.class
at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 7 more
Ausnahme: java.lang.ClassNotFoundException: oracle.forms.engine.Main
My configuration is the following :
- HP ProLiant DL360 G7 (64GB)
- RHEL 5.5 64-Bit
- jdk-6u22-linux-x64 (used during the installation)
- Oracle Weblogic 1.0.3.3 64 Bit (wls1033_generic.jar)
- Oracle Fusion Middleware 11.1.1.3 64 Bit
That's really strange I had no trouble during the installation process, my problem is when I call the forms,
then I get the error described before.
Did someone , maybe had this problem ? and where could I start to investigate ?
Best regards
Frane

one more things that I have seen , which is a bit strange.
when I try to access directly the jar like :
http://test.corp:8090/forms/java/frmall.jar
I get the following message in the browser :
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address
Usually on my other installations I can access the jar file directly wihout error.

JMS sender cc error: Error while calling operation 'setChannel' for object

Hi guys,
I'm getting following error in my sender JMS adapter which tries to connect to Websphere MQ:
Error while calling operation 'setChannel' for object '| com.ibm.mq.jms.MQQueueConnectionFactory
it is then followed by connection and system parameters.
Any idea, what could be wrong?
I also doubt about cc's connection parameters:
- transport network protocol: should I use TCP/IP or WebsphereMQ?
- JMS compliant: non-JMS or JMS compliant?
thanks for your help,
olian

Hi Olian,
the configuration of a JMS adapter requires close working with the MQ team. they are best people to tell you what is the correct parameter value.
depending on the "transport protocol" he will be able to help you complete the configuration.
if you have chosen "websphere MQ (non-jms)", the transport/network protocol and Jms-compliance depends on the configuration made on the network and MQ.
Raghu

Lync server call failed due to network issues

hi,
i receive an error while making a lync call to an internal user
"call failed due to network issues"
i have two ip's installed on My NIC but when i remove one ip of the ip's from
my nic, everything seems to work fine.
Kindly help

Hello Matt,
Hope you keeping well..!!
We are communicating with external customers lync server through federation option setup on our corporate lync server. We have received the federation setting from the customer with SIP address which has been setup on our corporate lync servers after
that we were able to browse the customer contact through corporate lync account.
We were also able to chat with external customer but however voice/video functionality are not working through same session. Whenever we try to dial out external customer lync account it ended with error message "call ended due to network issue".
We have checked the setting from corporate lync servers and network point of view but doesn't find any issue which cause the disconnection to voice/video over lync. Could you pl help or guide with the way.
Thanks

How to give network path while creating oracle directory.

I have created
CREATE OR REPLACE DIRECTORY TESTDIR AS '\\168.176.33.117\TESTDIR';
but through this path i m not able to create text file.
create or replace procedure WriteTest is
f utl_file.file_type;
s varchar2(200) := 'this is some info';
begin
f := utl_file.fopen('TEST2DIR','sample2.txt','W');
utl_file.put_line(f,s);
utl_file.fclose(f);
end WriteTest;
Help how to give network path while creating oracle directory.
--when i give local machine path then it will create at local machine where oracle is installed. but not able to create at other machine.
Zakir

Well for starters your directory object is called TESTDIR and in your fopen statement you are referring to TEST2DIR.
On top of that I'm not sure oracle is happy to refer to network locations. I think you have to map it to a regular drive mapping (shared directory) type path. Can't say I've every tried to do it though.

My i phone4s network lost while calling on airtel 2g network on 3g working good.

Similar Messages

Maybe you are looking for