My i phone5 is not powering up even if the charger is attached.. please help
my iphone5 doesn't power up even if the charger is attached to it please help....
Hi generosa1972,
Thanks for using Apple Support Communities. This article has steps you can take if your iPhone will not turn on:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Cheers,
- Ari
Similar Messages
-
I have iMovie application open, but the iMovie application keeps disappearing off the right hand side of the screen and and I can not see it, even though the application is open..help, please!
Thanks. I don't know why it wouldn't just go back there when I tried putting it back? I didn't change anything, so I assumed the new "default" was over on the left. Glad it was a simple solution after all.
-
I ordered an iphone 6 plus 64 gig space gray on 9/19/14. I still have not gotten any information on the ship date. Please help verizon!!!
urdea123,
You called and help has arrived. Congrats on the new phone. The iPhone 6 Plus 64GB space gray device is shipping on 11/7. You can always check your order here http://vz.to/1qKj0Rx
RobinD_VZW
Follow us on twitter @VZWSupport -
I have upgraded to the iPhone 5s and I have transferred all information over but I do not know how to transfer the phone service. Please help
The phone should have activated when you set the device up. If it didnt, contact your carrier
-
My phone turned off and will not turn on even on the charger
My phone turned off and will not turn back on. It doesn't react when charger is plugged in, no sign of life at all. What do I do?
Hold the HOME and SLEEP buttons at the same time until an Apple logo appears, about 10 seconds.
-
Code not working cant figue out the problem...please help
please find below a code for a dealer network which for some reason is giving the following error
Internal Servlet Error: Unable to compile class for JSP/usr/local/jakarta-tomcat/work/www.nerolac.com_8080/_0002fdealer_00032_00031 _0002ejspdealer21_jsp_5.java:28: Class TreeSet not found in type declaration. TreeSet tcity; ^ /usr/local/jakarta-tomcat/work/www.nerolac.com_8080/_0002fdealer_00032_00031_00 02ejspdealer21_jsp_5.java:243: Class TreeSet not found in type declaration. tcity=new TreeSet(); ^ 2 errors
The code
<%@ page language="java" isErrorPage="false" errorPage="error.jsp" import="java.sql.*,java.util.*"%>
<jsp:useBean id="conb" class="nerolac.ConnOdbc" />
<%!
String sql_state,form_state,sql_city,flag,city,sql_details,address;
ResultSet rs_state;
String id,stateid;
ResultSet rs_city;
ResultSet rs_details;
TreeSet = tcity;
%>
<SCRIPT ID=clientEventHandlersJS LANGUAGE=javascript>
<!--
function state_onchange()
if (document.testa.state.selectedIndex!=0)
if(document.testa.city == document.undefined)
else
document.testa.city .value="";
document.testa.submit();
function city_onchange()
if (document.testa.city.selectedIndex!=0)
document.testa.submit();
//-->
</SCRIPT>
<html>
<head>
<title>New Page 1</title>
<script language="JavaScript">
image1a = new Image()
image1b = new Image()
image2a = new Image()
image2b = new Image()
image3a = new Image()
image3b = new Image()
image4a = new Image()
image4b = new Image()
image5a = new Image()
image5b = new Image()
image7a = new Image()
image7b = new Image()
image8a = new Image()
image8b = new Image()
image9a = new Image()
image9b = new Image()
image10a = new Image()
image10b = new Image()
image1a.src = "images/s8.gif"
image1b.src = "images/s8_pop.gif"
image2a.src = "images/s9.gif"
image2b.src = "images/s9_pop.gif"
image3a.src = "images/s10.gif"
image3b.src = "images/s10_pop.gif"
image4a.src = "images/nav_whypaint.gif"
image4b.src = "images/whypaint_pop.gif"
image5a.src = "images/s3.gif"
image5b.src = "images/s3_pop.gif"
image7a.src = "images/dn3.gif"
image7b.src = "images/dn3_pop.gif"
image8a.src = "images/top.gif"
image8b.src = "images/top_pop.gif"
image9a.src = "images/i24.gif"
image9b.src = "images/i24_pop.gif"
image10a.src = "images/i25.gif"
image10b.src = "images/i25_pop.gif"
</script>
<link rel="stylesheet" href="scripts/style.css" type="text/css">
<style>
.a1{cursor:hand}
</style>
</head>
<body topmargin="0" leftmargin="0" marginheight="0" marginwidth="0" background="images/s12.gif">
<table border="0" cellpadding="0" cellspacing="0" width="637">
<tr>
<td colspan="5" width="667"><img border="0" src="images/c1.gif" width="68" height="56"><img border="0" src="images/dn1.gif" width="115" height="56"><img border="0" src="images/dn2.gif" width="105" height="56"><a href="index.jsp target="_top"></a><img border="0" src="images/s3.gif" width="38" height="56" name="ix"><a href="index.jsp target="_top"></a><img border="0" src="images/dn3.gif" name="pa"><img border="0" src="images/dn4.gif" width="59" height="56"><img border="0" src="images/n5.gif" width="96" height="56"><img border="0" src="images/n6.gif" width="73" height="56"></td>
</tr>
<tr>
<td colspan="4" width="667"><img border="0" src="images/dealernetwork_h.gif" ></td>
</tr>
<tr>
<td colspan="4" width="667"><img border="0" src="images/s12.gif" width="635" height="26"></td>
</tr>
<tr>
<td width="26"> </td>
<td>
<%
conb.OpenConn();
sql_state = "select * from statenetwork";
rs_state=conb.getResult(sql_state);
%>
<table><tr><td> </td></ tr></table>
<form name="testa" action="dealer2.jsp" method="get">
<div align="center">
<center>
<table border="0" cellpadding="2" width="600" bordercolor="#000000" bordercolorlight="#000000" bordercolordark="#000000" height="61">
<tr><td height="23"></td>
<td width="15%" bgcolor="#B5D2CA" height="23" align="Center"><b><font face="Arial" size="2">Select
State</font></b></td>
<%
if (request.getParameter("state") !=null)
if (!request.getParameter("state").equals(""))
%>
<td width="5%" bgcolor="#B5D2CA" height="23" align="Center"><b><font face="Arial" size="2">Select
City</font></b></td>
<td width="15%" height="23" align="Center"><b><font face="Arial" size="2"></font></b></td>
<%}
%>
</tr>
<tr>
<td width="313">
</td>
<%
form_state = request.getParameter("state");
if(!form_state.equals(""))
try{
sql_city = "select ID,city,STATEID from dealernetwork where state = '"+ form_state+"'";
rs_city=conb.getResult(sql_city);
flag = "true";
catch(Exception e)
System.out.println("IN EXCEPTINO-----"+e.getMessage());
%>
<td width="192" height="26" bordercolordark="#00FFFF" align="center">
<font face="Arial" size="2"><select name="state" onchange="return state_onchange()">
<%if(form_state.equals("")){%>
<font face="Arial" size="2"><option selected> -- Select State -- </option></font>
<%}else{%>
<font face="Arial" size="2"><option> -- Select State -- </option></font>
<%}%>
<%while(rs_state.next()){%>
<%if((request.getParameter("state")).equals(rs_state.getString("state"))){%& #38; gt;
<option selected><%= rs_state.getString("state")%></option>
<%}else{%>
<option><%= rs_state.getString("state")%></option>
<%
%>
</select>
</font>
</td>
<td width="167" height="26" align="center">
<%if (!request.getParameter("state").equals(""))
%>
<font face="Arial" size="2">
<select name="city" onchange="return city_onchange()">
<%
if(request.getParameter("city") != null)
%>
<font><option selected><%=request.getParameter("city")%></option></font>
<%}
else{%>
<font><option selected >Select City</option></font>
<%}%>
<%
tcity=new TreeSet();
while(rs_city.next())
String s1 = rs_city.getString("CITY");
id = rs_city.getString("ID");
stateid = rs_city.getString("STATEID");
s1 =s1.toLowerCase();
String f1 = (s1.substring(0,1)).toUpperCase();
String s2 = s1.substring(1,s1.length());
city=f1+s2;
tcity.add(city);
%>
<% Iterator cityIterator = city.titerator();
while (cityIterator.hasNext())
String u_city = (String)cityIterator.next();
%>
<font size=""><option value="<%=u_city%>"><%=u_city%></option></font>
<% } %>
</select>
</font>
<% }%>
</td>
</tr>
</table>
</center>
</div>
<center>
<br>
</center>
<span style="position: absolute; left: 15; top: 121; z-index: -2"><img src="images/indiamap.jpg" width="248" height="245"></span>
<br><p> </p>
<p>   ; &nbs p ;
  ; &nbs p ; &nbs p ; &nbs p ; &nbs p ;
  ; &nbs p ; &nbs p ; &nbs p ; <br><p>   ; </p>
<%
if(request.getParameter("city") != null)
String upper = request.getParameter("city").toUpperCase();
String lower = request.getParameter("city").toLowerCase();
String firstCap =request.getParameter("city").toLowerCase();
String firstCap1 = (firstCap.substring(0,1)).toUpperCase();
String firstCap2 = firstCap.substring(1,firstCap.length());
String firstCap3=firstCap1+firstCap2;
sql_details = "select * from dealernetwork where city= '"+ upper +"' or city= '"+ firstCap3 +"' or city= '"+ lower +"' and stateid="+stateid+"";
rs_details=conb.getResult(sql_details);
%>
<div align="center"><center>
<table>
<tr>
<td><font color="#000000">
<b>Listing of dealer's addresses corresponding to the selected cities are as follows:</b>
</font>
</td>
</tr>
<tr><td></td></tr><tr><td></td></t r><tr><td></td></tr><tr><td></td>& #38;l t;/tr><tr><td></td></tr>
</table>
</center></div>
<%
while(rs_details.next())
%>
<div align="center">
<center>
<table border="0" cellpadding="2" cellspacing="1" width="82%">
<tr>
<td width="30%" bgcolor="#B5D2CA" align="left" bordercolor="#000000" bordercolorlight="#000000" bordercolordark="#000000"><b><font face="Arial" size="2">Dealer Name</font></b></td>
<td width="56%" bordercolor="#000000" bordercolorlight="#000000" bordercolordark="#000000" bgcolor="#D2E3DE"><font face="Arial" size="2">
<%
String dealer =rs_details.getString("dealer").toLowerCase();
String dealer1 = (dealer.substring(0,1)).toUpperCase();
String dealer2 = dealer.substring(1,dealer.length());
String dealer3=dealer1+dealer2;
out.println(dealer3);
%></font></td>
</tr>
<tr>
<%
address = "";
if(!(rs_details.getString("address1").equals("null")))
String s1 = address +" "+ rs_details.getString("address1").toLowerCase();
String f1 = (s1.substring(0,1)).toUpperCase();
String s2 = s1.substring(1,s1.length());
address=f1+s2;
if(!(rs_details.getString("address2").equals("null")))
address = address +" "+ rs_details.getString("address2");
address =address.toLowerCase();
if(!(rs_details.getString("address3").equals("null")))
address = address +" "+ rs_details.getString("address3");
address =address.toLowerCase();
%>
<td width="30%" bgcolor="#B5D2CA" align="left" bordercolor="#000000" bordercolorlight="#000000" bordercolordark="#000000"><b><font face="Arial" size="2">Address</font></b></td>
<td width="56%" bordercolor="#000000" bordercolorlight="#000000" bordercolordark="#000000" bgcolor="#D2E3DE"><font face="Arial" size="2">
<%if(!address.equals("")){%><%=address%><%}%>
</font></td>
</tr>
<tr>
<td width="30%" bgcolor="#B5D2CA" align="left" bordercolor="#000000" bordercolorlight="#000000" bordercolordark="#000000"><b><font face="arial" size="2" >Phone</font></b></td>
<td width="56%" bordercolor="#000000" bordercolorlight="#000000" bordercolordark="#000000" bgcolor="#D2E3DE">
<%if(!(rs_details.getString("phone").equals("null"))){%><%=rs_details. getString("phone")%><%}else {%><font face="Arial" size="2">N.A.</font><%}%></td>
</tr>
<tr><td> </td></tr>
</table>
</center>
</div>
<%
%>
<%
conb.CloseStmt();
conb.CloseConn();
%>
</form>
</td>
</tr>
</table>
</body>
</html>
Please tell me where the code is not rightDon't cross post
http://forum.java.sun.com/thread.jspa?threadID=576928&messageID=2891328
Please format your code using the buttons marked "Code" above the text area where you submit your posting.
<%!
String sql_state,form_state,sql_city,flag,city,sql_details,address;
ResultSet rs_state;
String id,stateid;
ResultSet rs_city;
ResultSet rs_details;
TreeSet = tcity;// <-- Here. Remove the equals sign "=".
%> -
The user and password is valid for apple not for I cloud.
You cannot create an iCloud account on Windows. You can do so on a Mac or an iOS device and then log into it with your Windows PC.
-
My acer R7 sometimes will not power on, even when the power light is on, do i have a virus?
My acer r7 will not power on even with the power light on? Do i have a virus???
dcdungan,
If the power light is on, it is powering on. There could be a problem with the display itself or a driver, have you tried connecting an external display and seeing if something comes on the screen?
Do you see absolutely nothing on the screen when it is powered on, not even the splash screen? -
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
I want to sync my Voice Memos but iTunes 10.5 will not let me even with the "include voice memos" checkbox selected. As well Ive deselected all the music in itunes so when I sync there will be none on my phone but itunes also ignores this request and puts purchased music back on. I do not have autofill selected. Also wondering where the backup of my iphone 4s is located on my hard disk. Any help greatly appreciated.
Sorry thats itunes 11.5
-
I have a problem that I can not load or even close the download in iTunes, it turns out I have hanging in the mode, and because of that I can't download from AppStore, because it turns out that the other programs I have on standby. What do I do? Thank you.
If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
Cheers, Tom -
My iPad is not charging when I pluged in and its keep turning off and on (it just shows the apple logo). I even changed the charger so what else can I do to start my iPad?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
Firefox does not stop loading even after the site is loaded and continues as if it is still loading. I have clocked it to 15 minutes, why? edit
DetailsSorry, I should distinguish between slow loading and manual reloading.
I understood your problem to be that Firefox never finished loading the page, i.e., some part of the page was loading too slowly.
By reloading, I meant Ctrl+r (or the reload button), to manually reload the page. You can disregard any cached files and reload all content fresh from the server by adding the Shift key, i.e., Ctrl+Shift+r (helpful when specific sites do not load correctly).
If the page is automatically reloading itself over and over, that sounds like a completely different problem. -
i have a mac os x snow leopard. my problem is that when i go to the ethernet settings it shows 'not connected'. i called the internet person even he couldn't fix it PLEASE HELP!!!!!!!!!!!!!!
System Preferences > Network > Ethernet? If that shows "not connected" that is all your Mac knows. As far as it is concerned there is no cable connected to the port on your Mac, or the other end of the cable is either disconnected or connected to something that is broken.
Try another cable. If the cable is broken you will also get that status message. If you have exhausted all of these possibilities, the only remaining cause is an inoperative port on your Mac. -
hi
Hello
Since yesterday evening. My itunse program does not work my mobile.
Note
I update the program to ios7
Please help me
Thank youI found this strange glitch that wouldn't let me open my iTunes Store. I tried all the reset options and still iTunes would close a second after it opened. I fixed this. Instead of using the iTunes Store icon on your home page to open it. Go into music and click on store. It will say "Cannot Connect To Store". Just tap ok. Then tap on "featured" on the bottom of the screen. That will take you to the store front page. After that is loaded. Back out and the icon for iTunes Store on the home page should work just fine. Hope that helps.
Maybe you are looking for
-
Updating Template Details During the Creation of Business Partner
Dear ABAPers, I am working in SAP CRM 5.0.I am creating the Business partner Using the Transaction code 'BUP1'.My Requirement is at the time of saving the Business Partner i want to update the Template Details.I tried with the BAdI 'BUPA_TEM
-
I just found I can't repeat the problem, when I opened a new tab and submitted this question to you, the cut and paste of the links now work when I returned to the original page. I had tried it on at least 4 different links earlier.
-
i can't update my itunes and it shows me this message: The installer has insufficient privileges to access this directory: C:/program files/itunes. The installation cannot continue. Log on as administrator or contact your system administrator
-
I have defined a RFC and call it via JCo. The RFC is used to fill data to my table. The problem is the data can be fill via the import parameter, but the table parameter is not work. I have tested the RFC in function builder and it work. Here is my R
-
How to control HP 33120A and output a DC signal?
Hellow! I'd like to control HP 33120A function generator,right now i have use the HP 33120A-WFM Config EX.VI and i can output Sin,Squart...wave,but when i try to output the DC signal,the amplitude control seems not work,what shall i do to output a DC