My i pod classic wont turn on and is on a black screen
My i pod wont turn on or nothing its just in a blackscreen
Have you worked through each and every single suggestion in this Apple support document?
iPod won't turn on
B-rock
Similar Messages
-
My daughters iPod wont turn off and has a blank white screen. i tried to restore it to the original state and it is still the same. is this fixable? thank you for your help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Last week I bought my iphone6 and today, when I was using it, a red screen appeared and it collapsed into a permanent black screen with an apple in the middle... I restarted it a few times and tried to connect it to itunes and restore it, but it doesn't work, it starts the restoring process but after a while it fails and error 4013 appears on my Mac's screen. I don't know what to do, please help me I really need to use my phone right now.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod wont turn on and only flashes the apple logo what do i ?
not too sure what going on, my ipod wont turn on and when looking at the screen all u see is the apple logo flashing from time too time. i tried resetting it but that didand if so how? nothing. do i now have to do a factory reset
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
My Ipod touch wont turn on and screen just flashes black?
my ipod touch hasnt been working lately. I was at the beach and the battery died but we didnt have any chargers so i waited untill we got home to plug it in. When i did the ipod got really messed up and it would just turn off when i unplugged it. So i tried to restore it and when it started it said preparing ipod for restore and the screen would just turn off and start flashing a black screen. Ive tried regular and DFU restore but nothing works. Does anyone know how to fix this or if it is truely broken?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I pod wont turn on and i tunes dosent reconise it
my ipod touch wont turn on and i tunes does not reconise it when attached to computer.
Then place in a sealed container with uncooked rice to dry it out. Change the rice daily for a week then try the article.
If not successful then the water damaged the iPod. -
My Ipod classic wont turn back on
My IPod classic wont turn back on. I dont know why.
Try a Reset.
Turn the Hold switch on, then off again and then press-and-hold the Menu and the Select (centre) buttons together for at least ten seconds. The Apple logo shoudl apapera at soe stage and then the iPod will re-start.
Alternatively, if the iPod's battery is drained, plug it into a power source and leave it for at least thirty minutes. Only then will it show signs of life. -
Ive had my i pod for about 6 months now and it has been working fine and only ran out of battery once throughout the whole 6 months, but the day before yesterday i was listening to it it ran out of battery. I turned it back on and i started to work again but about 10 minutes later it indicated that it was out of battery again. So when i tried to turn it back on, it wouldnt work.
I tried charging my i pod but the screen is blank and it dosent seem to turn on at all. so i left my i pod disconnected for over 24 hours for it to drain but it still won't turn on. This is my second i pod. This is driving me nutseverytime I try to turn on my ipod it wont. I press all the buttons on it and it still wont turn on. and yes I checked the hold button. after about an hour or so I try again and it may work it may not. this usually happens if I dont listen to it for about a day or so. Is this a common problem or is this a problem in my ipod?
-
My ipod classic wont turn on. telling me to go to a link
my ipod classic wont turn on. telling me to go to a link. www.apple.com/support/ipod cant find for what im looking for. can someone tell me what i can do.
Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.
Above from:
http://support.apple.com/kb/TS3694#error28 -
Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks
As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.
-
is there another way i could turn my phone on? it wont turn on or show me the battery screen to show its charging. i already tried to hold the on and home button at the same time but it does not want to turn on. please help?
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591 -
My old 1st gen ipod touch wont turn on and makes a clicking sound when I plug it in.
My old 1st gen ipod touch wont turn on and makes a clicking sound when I plug it in. The ipod doesnt turn on when I plug it into the wall, even if I let it charge, and itunes won't recognize it. I have tried to reset it with the home and power buttons. Whats wrong and how can I fix it? I think it might be the memory or the battery. What could the clicking sound be related to? Thanks
Try placing the iPod in recovery mode and then try restoring the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
After that I would make an appointment at the Genius Bar of an Apple store. -
My ipod nano 5th gen. wont turn on and is not being recognized on my mac or itunes
my ipod nano 5th gen. wont turn on and is not being recognized on my mac or itunes
What have you tried so far in terms of troubleshooting? After leaving the Nano to sit and charge for at least 30 minutes, try resetting it by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear. You'll want to make sure the Hold Switch is not in the On position as well.
B-rock -
My ipod touch needed to be updated so I did and now it won't turn on all it does is show the itunes icon and says toconnect it to itunes so I did and let it be updated and now it wont turn on and I tried resetting but nothing changed.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
what to do my ipod touch 4g is updated to ios6 now it has a white scren and wont turn off and to top it off the homebutton does not work at all please help me
Try:
- iOS: Not responding or does not turn on
-When it says place the iPod in recovery mode use this program instead of the buttons.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Since uprgading to Mountain Lion, my mac mail no longer works with my exchange email properly. I finally gave up and moved back to outlook for mac, but now my new issue is using outlook calendar and contacts with icloud; possible?
-
Epson Color 777 wants OS 9--- I upgraded to Tiger
I upgraded my G4 with Tiger software. I had to use the erase hard drive method because of some corrupt files. Now, I want to use my Epson Color 777 printer on this computer. I have the original installation CD. It wouldn't install because it wanted t
-
Error: Illegal number of arguments passsed to the function call
HI All, In our scenario we are using XSLT mapping with java enhancement.Its working fine in Stylus studio but when the same is imported into XI its throwing the below mentioned error: javax.xml.transform.TransformerException: com.sap.engine.lib.xml.u
-
Multiple currency translation in one single query execution.
Hi folks. I have today running in production, a report like: The user input a period and a version (multiple single values selecion) - Period - Version (0VERSION) And the report returt as follow 2010 Ve
-
Value helps in UI(Dynpro) from MDM using webservice
Hi, I have a UI developed in Webdynpro which takes value helps from MDM SP04. For the value helps i have a webservice which has the code, description and table name. Could anyone help me out on what to do after importing the websevice model.. thanks.