My i-pod does not work ever since i-tunes 7 came out

there seems to be a trend here and i want to know waht apple plans on doing about it. whenever i connect my i-pod my whole pc locks up untill i disconnect it. i was quoted $270 to have it fixed on apple.com. i could just buy another i-pod for that price. maybe i will get a microsoft zune. i am so discouraged with apple now. if anyone can help it would be nice.

See if this helps
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”

Similar Messages

In iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8

in iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8.
Tom at the Genius Bar told me that Option Delete would work. It does not.
I had to upgrade to iTunes 11.1.(I26) because it is required with OS7 on my iPod Touch (5th Gen). I have tried shutting down iTunes, then shutting down the entire system. This is the first in many visits that the Genius Bar gave me a solution that did not work.
This is a big awkward computer locked to my desk. I would rather not unlock it and then carry it through a shopping center to the Genius Bar if i can avoid oit.
When I installed iTunes 11.1, I discovered that Ihad to resubscribe to virtually all of the podcasts that I had previously been subscribed to. That was a surprise.

Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry

Aero in Windows 7 64bit home premium does not work. Aero display selections are grayed out.

Aero in Windows 7 64bit home premium does not work. Aero display selections are grayed out. HP 600-1315xt.
Have tried everything I can find on internet and here on HP. None of the suggestions worked. Windows fixit for windows could not fixit. Any suggestions are appreciated. I can always use my disks and rebuild the computer. A last resort.

Hi,
It might be the graphic driver not compitable with the graphic device. Has there been a change to the graphic driver?
One thing you can try is to uninstall graphic driver and download the latest from Windows Update (if you haven't tried this). Here are the possible steps:
1. Go to Control Panel->Hardware and Sound->Device Manager, uninstall the graphic card driver by right clicking and select "uninstall". Make sure the option "Delete the driver software for this device" is selected.
2. Reboot the system.
3. Go to Control Panel->System and Security->Windows Update, click on "Optional updates" and find the driver for g210 and do the update.
I work on behalf o HP.
Please click the white Kudos star to say thanks.
Please click Accept As Solution if you found my response helpful.

Hello,everyone.i purchased an iphone 5S from a retailer in my country after coming back to my home i restore this iphone it shows an activation id but i dont know what i have to do now?my apple id does not work in this situation.kindly help me out

Hello,everyone.i purchased an iphone 5S from a retailer in my country after coming back to my home i restore this iphone it shows an activation id but i dont know what i have to do now?my apple id does not work in this situation.kindly help me out because it cost me to high and if this is not activated i have to bear a huge loss.i am a loyal customer of apple from a past 5 years.thank you for your cooperation

Yes, this is activation lock. Return the phone for a refund, as it is useless without the activation information of the previous owner.

Western iso 8859-1 character set is gone, "other (including Western" does not work. Why did you take it out?

Some websites need Western ISO 8859-1 character set to run properly and you have taken it away in favour of "other(including Western)", now the site does not work properly. Why did you take it out and can you please put it back.

ISO-8859-1 and Windows-1252 should be equivalent. Can you provide an example of a page that doesn't display properly?
If you have to manually select a character encoding to view the page correctly, then the site is broken and you should notify its owner that it needs be fixed. Websites specify the character encoding in one of two ways:
* [http://www.w3.org/International/tutorials/tutorial-char-enc/ Handling character encodings in HTML and CSS | W3C]
# The ''Content-Type'' response header.
# The ''meta'' tag in the page source.
''Henri Sivonen (:hsivonen) wrote:''
<blockquote>We are in the process of implementing http://encoding.spec.whatwg.org/ . The process involves removing support for legacy character decoders that aren’t really necessary for supporting existing Web content.</blockquote>

I-pod does not show up in i-tunes

I-pod does not show up in I-tunes

iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

ExternalInterface.call() does not work normally since flash player 11.8.800.168

Problem Description:
korean character crash when using ExternalInterface.call(funcName, args)
     funcName : alpha-numeric
     args : include korean characters
Steps to Reproduce:
<flex source>
private function handleRequest(val):void {
     ExternalInterface.call("processRequest", "가나다라");
<javascript source>
function processRequest(param) {
     alert(param); //does not display korean characters
Actual Result:
     媛?섎떎??
Expected Result:
     가나다라
Any Workarounds:
Nothing !!
OS : Windows7 Pro 64bit(korean)
Flex Builder : 3.0
Flash Player : 11.8.800.168 ActiveX
Browser : IE10
WAS : WebLogic 8.1, 12g, Tomcat 5,6,7
Chrome : 29.0.1547.66 m <== Good
FireFox : 23.0.1 <== Good

Same problem here! With the exact same version.
Problems on IE.
Chrome and FF OK

Flash Player not working ever since 4.0.3

hello all
so upraded my phone/xperia ray to 4.0.3 last month and now to 4.0.4 but flash player is not working in the default browser....all i see is the green little arrow where there is supposed to be a video or an ad or w/e. i have tried factory reset...phone repair...even mem card format to no avail. if anyone has any solution do share.
P.S flash player works on dolphin browser.

you could repair your phone yet again, also check the market for an update on flashplayer
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
Don't forget to mark the Correct Answers & Helpful Answers
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Keypad right-button scroll does not work every since I downloaded FIREFOX - NEWEST VERSION. It works w/INTERNET EXPLORER. IF I cannot get an answer to solve this issue, I am going to close out Mozilla as my browser and go SOLELY to Internet Explorer.

Using an Acer Inspire 7200 but obviously is not the problem.

Hello, Edward and thank you for your note.
I read through the thread you mentioned and it seems that people are having a lot of problems with the iCloud clients, so we're not alone, but the unique issue in my case is the failing email address vs. the working perfectly email address.
After reading your message tonight, I tried my setup again with the preferred Apple ID (the one without the "." between the names), and for the first time ever, IT WORKS. Mail app configured the servers both send and receive as p01-smtp.mail.me.com and p01-imap.mail.me.com. For the first time, I'm able to send and receive into the Mail app, create mailboxes, move messages into and out of mailboxes, keep Sent messages, etc.
I had a 50-minute support chat with MobileMe support via ExpressLane on Monday afternoon. They couldn't resolve my issue but passed me on to escalation. I was told to expect to get an email from advanced support by this afternoon, but none has arrived. However, so far tonight -- and I will check again tomorrow several times before declaring victory -- it looks like something has been fixed on the Apple end to make things work.
I will report back after I do some additional testing tomorrow to make sure the fix is real and is solid...and before I let my friend, the new Mac user, know the good news.
Regards,
Mike

ICal does not work properly since the last OS update

Hi everybody,
I run a Macbook 15 Retina RAM 16Gb with Mac OS 10.8.4. Over the past months (I think after updating the OS), iCal has not been working properly. TO make a long story short, as you can see on the screen cap, it is no longer possible to select the kind of calendar/color etc when right clicking. In order for example to create a "Meetings" event (see left column on the screen cap), what i need to do now, is to find a previous event (i.e. created before iCal stopped to work) then copy and paste it to the time when I want it to happen in the future and then modify it. Not convenient at all.
This is kind of surreal (that such a bug has not been fixed yet) to given the price of the Mac and that iCal is part of the core apps of the OS. I looked over the Internet and did not find a solution. But I must have missed things. Hence I would be very very grateful if anyone could help me.
Thanks a lot.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

Time machine does not work right since Lion install

I successfully used my 500GB Simpletech external drive with Time Machine while using Snow Leopard. Since I upgraded to Lion, my computer is constantly showing me this eject error and the backups are constantly interrupted-
This error seems to happen each interval of the Time Machine backup. Anyone have an answer for this or a work around?

I successfully used my 500GB Simpletech external drive with Time Machine while using Snow Leopard. Since I upgraded to Lion, my computer is constantly showing me this eject error and the backups are constantly interrupted-
This error seems to happen each interval of the Time Machine backup. Anyone have an answer for this or a work around?

Aperture 3 does not work well since installing Mavericks. Constantly have to repair the library database. Any suggestions?

Aperture 3.5.1 was working well enough for me in Mountain Lion, but it seems that switching to Mavericks has made it slower, made it crash frequently and also given me frequent messages that the database is corrupt and I need to rebuild the database library, which I have done multiple times. I also use Aperture for Photo Stream, and it is especially slow and problematic there. Any ideas? Should I just use iPhoto instead? I'm more familiar with the flow in Aperture and would need to learn how better to use iPhoto, so that would be a last resort for me.

Aperture 3.5.1 was working well enough for me in Mountain Lion
Aperture 3.5.1 is incompatible with Mt. Lion - you must have had an earlier Aperture version running with Mt. Lion.
also given me frequent messages that the database is corrupt and I need to rebuild the database library
That message is prompted by the crashes. After a crash your library may need repairing.
Aperture 3.5.1 was working well enough for me in Mountain Lion, but it seems that switching to Mavericks has made it slower, made it crash frequently
Is all your software compatible with Mavericks? Plug-ins, external editors, preference panes, device drivers, video codecs? Did you install any other software, when you upgraded to Mavericks?
Where is your Aperture library? On your system drive or external drive?
Does Aperture also crash, if you launch it while holding down the Shift key?

IPod not working ever since I downloaded new iTunes

I have an 160gb iPod Classic and am running Windows 7 on a PC. I downloaded the latest version of iTunes. First all of my album artwork disappeared off iTunes and wouldn't get the artwork for me. I had to manually put the photos in but only when they were saved onto my computer, copying and pasting left me with a black box. I didn't plug my iPod classic in for a while because I was awaiting the shipment of my new USB cable. When I finally did plug it in, my iPod refused to sync and then said it needed to be restored. I tried restoring, it got stuck in disk mode for a while, then I got a red X and it told me I needed to restore with iTunes. After many tries I eventually got my iPod back to the normal mode but it keeps telling me that I need to reformatt F: drive and various other syncing error messages but I can't get it to do anything. Now the home screen on my iPod where it shold said Music, Video, Settings, etc. is there but all the text is gone. Apple wants $150 to fix this iPod that I already got a replacement for less than 2 years ago. I did nothing for my iPod to stop working!! I think this has something to do with the new iTunes because it worked fine before this.

Make sure Siri is On...
Settings > General > Siri > Siri On.
Troubleshooting Siri
http://support.apple.com/kb/TS4079

What should I do if FaceTime on my I pod does not work because of the wifi?

It won't work please help!!!!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

My website containing a swf file does not work now since update of 3.6.4

I have recently set up my own site using flash panorama player (swf file) which has been successfully working for a few months now: annedoncaster.co.uk. I recently did an update on my firefox browser which I am sure has caused an issue with my panoramas showing, they no longer load or show on my website. I have tried all the other browsers and they all load the panorama, which is very odd.
== This happened ==
Every time Firefox opened
== Update of firefox 3.6.4

@'''Anne''':
That is a tough one.
I can only make it work if I disable OOPP for the Flash plugin and close and restart Firefox.
It works if I copy and paste the URL of the Flash in the location bar, but as soon as I use HTML code then it fails.
Apparently the plugin-container process isn't able to play that file.
You can try to file a bug report for it on https://bugzilla.mozilla.org/ to see if anything comes up.
See http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
You can set the prefs dom.ipc.plugins.enabled.* to false on the about:config page to disable the plugin-container process.
dom.ipc.plugins.enabled (currently false by default)
dom.ipc.plugins.enabled.npswf32.dll (Flash)
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page.

My i-pod does not work ever since i-tunes 7 came out

Similar Messages

Maybe you are looking for