My I-Pod Nano gets USB Device not Recognized

DELL   Windows XP  
And I tried the the 5 "R"'s, has this happened to any one else? Or did I get a bum I-Pod?
DELL   Windows XP  

ok well
try all the advice from simular posts
try waiting for at least 30 minutes with your ipod plugged in, the compiter may recognise it then. It sounds starnge but it happens with myn
also make sure you have itunes 7.0 and try reistalling it
try retsarting the computer with your ipod plugged in
good luck

Similar Messages

  • Getting 'USB device not recognized' message when I never did before.

    Hi there
    I am constantly getting a USB device not recognized when I plug in my nano. I never got this before and as a result all it does is charge. It is not showing up in iTunes anymore so I cannot remove or dowload new songs on to my nano anymore. I have tried to go into control panel and the USB Hub device manager to deselect the power outage option but that did nothing. Please help! I seem to encounter trouble with any accessories Apple sell, whether they be earphones or USB cables.
    Thanks

    i'm getting the same problem too.
    my ipod is nearly about 1 year old.
    i use my ipod nano 2GB for music and as a flashdrive to store my uni work.
    this morning accessing my files in the ipod on the computer was fine.
    then later in the afternoon when i connected it into a computer i keep getting the msg 'usb device not recognised'. also itunes dont recognise my ipod either anymore.
    i use Windows XP at home and uni.
    i've tried my ipod on at least three different computers at uni and just tried at home.
    same msg came up 'unknown device' from windows.
    i've read the other posts in the forum and it mentioned about 5 R's and resetting it.
    BUT the main problem is i DONT have any back up of my uni work and files and they are really really important so i CANT reset the ipod otherwise i will lose all the important things...my assignments, projects, photos...I was meant to make a back up b4 i start uni next monday but i guess now is TOO LATE.
    I've noticed that the socket of the ipod dock conector to usb cable, that connects to the ipod is slightly split open.
    Would this be causing the problem?
    I am in Utter Despair and Desperation at the moment.
    Can anyone help me PLEASE?
    i would be sooooo grateful for your kind help and time.
    kind regards,
    a student who is on the verge of a breakdown due to this problem.
      Windows XP   Packard Bell

  • My computer no longer recognizes my 7th Gen iPod Nano. "USB Device not recognized." What can I do to fix this?

    Hi!
    So here's what happened: My nano has been working just fine. I plugged it in this morning to my computer, and it automatically turned on, but instead of charging, it went to play music. I turned it off. However, it did not switch to charging mode. So I unplugged it, and then I plugged it back in. "USB Device not recognized." My iPod won't turn on anymore, and my computer simply does not recognize the nano.
    It may have gotten slightly damp yesterday as it rained a bit when I was walking home (though I kept it covered). When I got home, it proceeded to work for another two hours after that--then I turned it off. And this morning? It doesn't work, as described above.

    Try cleaning the connector on the bottom of the phone. Use a magnifying glass to see what is stuck inside, a dry toothbrush and/or wood or plastic toothpicks (nothing metal). If that doesn't resolve the problem your phone is broken.

  • Zen Sleek Photo gets USB DEVICE NOT RECOGNI

    I have ZEN Sleek Photo which i use for about a week now.
    Today I connected the player to the computer and got
    "USB DEVICE NOT RECOGNIZED" window in Win XP
    and the Zen Photo froze.
    Disconnected it, reset it using a pin, then turn it on and it's "re-building library"
    It works good as a player but i can't connect it to the computer.
    Tried restarting the computer, restoring the windows to a previous day, connected to all possible USB ports nothing hel
    ps.
    Hope for an answer
    Thanks in advance,
    Danny
    UPDATE.... PROBLEM SOLVED.. LOOK BELOW.. FRED'S SUGGESTIONMessage Edited by dindia on 07-24-2006 2:49 AM

    fred38 wrote:
    Hi i had this problem too and the solution was amazingly simple. (I found it by searching on Google for ages!) Turn your pc off and then unplug it from the mains for approximately 30 mins. I know it sounds crazy but apparantly static electricity can cause problems with usb devices particularly if you have your device already plugged in to USB port-Windows forgets its there! After 30 mins plug your pc back in to the mains and voila! your Zen will be recognised again.
    2:44 AM : After 30 minutes of trying to fall asleep with no success turned on computer and connected the Zen... Didn't have much expectations, but IT WORKED! IT REALLY DID! WINDOWS FOUND THE DEVICE CORRECTLY AND EVERYTHING IS WORKING NOW!
    THANSKS FRED!
    Danny

  • IPod Nano Restore, USB Device Not Recognized. Windows XP. What to do?

    Hi,
    I tried to reset my iPod Nano but it did not work. It has a blank screen with the backlight on, and the music is playing. Someone suggested that I do a restore.
    However, when I connect my iPod to my PC, it says it is an Unrecognized USB device. I have Windows XP Pro, the restore application says it cannot initialize iPod.
    What am I to do?

    Someone here said that you need two drivers usbstor.sys and usbstor.inf I found them at driverguide.com. I have not tried to load them yet but I will probply tommorrow.My coumputer will not see ipod as a hard drive, it loads video fine and all my music but no pics.

  • 3G iPod Touch "USB device not recognized" on any PC

    My 3G been working fine for 1+ yr. Running iTunes 10 on a WinXP system; latest OS (4.2.1?) everything was up to date and working fine. One day I get "USB device not recognized" when I hook it to the PC. Also, when connected to a charger, I don't get the battery screen. It charges either way, but slowly.
    I visited the local Apple store & the guru checked it on her system, with same results. I just reset it, hoping for a miracle, but it still isn't recognized.
    Help?

    Hi Che-Che. I'm having what looks like the same problem. Cannot get this iPod Touch 4th Gen to be recognized on any computer. When I use the white Apple cord that came with it, absolutely nothing happens. Not a sign of being recognized or not being recognized. I brought a third party cable made by Scohche and it is made for iPod, but at least the computer acts like it is starting to load the USB driver, then it fails. The other cable you are talking about, was it an Apple cable? I'm leaning towards it being a faulty Apple cable.

  • USB Device Not Recognized - is my iPod toast?

    Got a new computer recently with Win XP. When I try to connect my iPod with a USB adapter I keep getting "USB Device not Recognized" and if I click that I get "Try reconnecting the device. If Windows still does not recognize it, replace the device."
    I can connect other USB devices like my compact flash cards etc. The iPod was working on my old computer.
    Any ideas??
    Thanks in advance for any help!!!

    I had a new ipod and windows wasnt recognizing it or giving me the message "new hardware found" and then telling me the drivers were missing... this is what I did and it fixed my problem.
    1. go to www.driverguide.com and sign up (for free)
    2. download usbstor.sys & usbstor.inf (and take note of where you download them to)
    3. update drivers by selecting folder you downloaded the two files to
    4. restart computer
    5. open itunes and then connect ipod
    good luck
    -jackie

  • Nokia e65, USB device not recognized using windows...

    Hello,
    When I am trying to connect e65 to pc  I always get "USB device not recognized". I tried to reinstall nokia pc suite, after that I've restarted phone and PC but it doesn't help. I tried to install older nokia pc suite versions and it doesn't help too. I'am using CA-53 cable. 
    P.S. I tried to reinstall only Nokia Connectivity Cable Driver but nothing happened..
    Maybe someone has a solution for this?

    @techvitalie
    Is it only as Windows USB mass storage device that it is not recognised by PC or same issue if connected in PC Suite mode with PCSuite/Ovi Suite installed?
    Happy to have helped forum with a Support Ratio = 42.5

  • "USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

    Hi,
    I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past.  Thank you board members! 
    Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago.  There have been no changes (I know of) to the configuration, but now I receive  "The connection between your device and the desktop could not be established.  Please check your setup and try again."  On the laptop I sometimes get  "USB device not recognized."  I am unclear why I get the PC message sometimes and not others.   
    I have tried the following: (not necc exactly in this order)
    Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
    Reset the Palm (multiple times)
    Rebooted the laptop  (multiple times before and after the Palm resets)
    Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
    and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409) 
    Followed the steps in "Start Here" found at  http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057 
    Moved Backup directory as per a post on this forum
    Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
    Followed the steps in HotSync troubleshooter guide you can run through located on
    http://kb.palm.com
    Went into Device Manager - found it shows no yellow ! 's
    Followed Device Mgr Troubleshooter - went all the way thru with no solution 
    Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue.    ...? 
    Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
    Read all the posts under "USB device not recognized." 
    OK, I'm at a loss, can anyone help me?  Many thanks in advance! 
    ~Bob
    Post relates to: Tungsten E2

    Hello!
    Using a cradle with the Tungsten E2?  Tried bypassing the cradle and just use the hotsync cable?  Tried a different computer yet?  Somehow, the PC is having problems getting a signal from the device.  I assume you have the laptop charger plugged into the laptop during this?  Not going through a docking station or port-replicator.
    One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop.  This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time.  Keep me posted.
    Post relates to: Treo 650 (Unlocked GSM)

  • USB Device not recognized Blackberry Classic

    I'm trying to connect my new blackberry classic to PC using USB cable. The PC is a laptop with windows 7 64bit. I tried all USB ports available on PC and I tried to install it on another PC with Windows XP. In both PC i get USB Device not recognized error and Blackberry Link cannot connect to smartphone. I need to connect in order to move all contacts from old blackberry to new blackberry. The BB software versions are the following:
    - Link version 1.2.4.27
    - Blackberry device manager 8.0.0.55
    - bbDevMgr 4.2.0.52
    -Drive USB RIM 4.2.0.32
    - Serial Usb RIM Driver 2.3.0.11
    Previously i had installed Blackberry desktop software for OS 7. Before installing the new version, in the last trial i uninstall all software from RIM and cleaned manually the registry.
    From what i can understand, there is perhaps a problem with 32/64 bit system driver.
    Without a solution to move the contacts and messages from old BB I will change the phone to another version/supplier. I spent already more than 1 day trying to do this...
    Thanks for the support

    I have Windows Mobile 6.0 on my Treo 750, Windows Mobile Device Center on my laptop (Vista OS), and Outlook 2003. When sync is established there is no problem with Outlook 2003, but there is a problem with recognizing Treo by my laptop. Also (probably) there is a problem with the connection cord (I have to move slightly USB couple of times inside a port in term to start connection)… It’s a minor but annoying problem.
    Post relates to: Treo 750 (AT&T)

  • "USB Device Not Recognized" Message when connecting iPod Nano

    I get the following windows pop up when connecting my son's iPod Nano
    *"USB Device Not Recognized"*
    *One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.*
    I have successfully connected this device to this computer before so I don't know what has changed.
    Message was edited by: ipodnannouser

    This did not work for me. I have a laptop that was running Windows XP, and it had no problems recognizing the iPod. I was having problems with XP, and rather then reinstall XP, I did a clean install of Vista. I did a settings transfer, so the new install of iTunes came already configured--I mention this since I don't know if it was a factor.
    When I plugged in the iPod, I got the USB Device Not Recognized. The usbstor.inf file did not fix the problem. However, the solution at http://www.winvistabeta.com/groups/275128/ipod-usb-device-not-recognized/message .aspx did fix the problem. Do this:
    Reset the iPod:
    1. Unplug the iPod.
    2. Turn the hold switch to HOLD and then back to off.
    3. Hold the Center and Menu buttons for 6 seconds until you get the Apple logo when you release them.
    4. Plug in the iPod. It should now be recognized.
    This worked fine for me the first time. Thanks! Jack

  • 2G Nano-USB Device Not Recognized message

    2G Nano has been sitting for months. Decided to use it as a backup. When connected to computer (tried on 4 different computers running iTunes) I get a "USB Device Not Recognized" message. It shows up in "Device Manager" as an "Unknown USB Device" not an "iPod". Have performed the required 5 Rs and it still will not work. Any help would be greatly appreciated!

    This did not work for me. I have a laptop that was running Windows XP, and it had no problems recognizing the iPod. I was having problems with XP, and rather then reinstall XP, I did a clean install of Vista. I did a settings transfer, so the new install of iTunes came already configured--I mention this since I don't know if it was a factor.
    When I plugged in the iPod, I got the USB Device Not Recognized. The usbstor.inf file did not fix the problem. However, the solution at http://www.winvistabeta.com/groups/275128/ipod-usb-device-not-recognized/message .aspx did fix the problem. Do this:
    Reset the iPod:
    1. Unplug the iPod.
    2. Turn the hold switch to HOLD and then back to off.
    3. Hold the Center and Menu buttons for 6 seconds until you get the Apple logo when you release them.
    4. Plug in the iPod. It should now be recognized.
    This worked fine for me the first time. Thanks! Jack

  • Ipod 7th generation. bought it 3 days ago. no problem then but now won't turn on. I keep getting a usb device not recognized (and i keep changing ports to no avail). what to do?

    ipod 7th generation. bought it 3 days ago. no problem then but now won't turn on. I keep getting a usb device not recognized (and i keep changing ports to no avail). what to do?

    wish i can rmber how mine was fixed i think i just waited tried again and likr magic it worked again left itunplugged, i was like you recently boughtand it happened to me, now i have another diffrent promblem with it.

  • My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this. I updated both windows and iTunes.

    My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this? I updated both windows and iTunes.

    Work through all the suggestions in this Apple support document first.
    iPod: Does not appear in Windows or iTunes and Device Manager is empty
    B-rock

  • I'm getting a message "USB Device Not Recognized" when I try to sync my iPad.  What should I do?

    I'm getting a message "USB Device Not Recognized" when I try to sync my iPad.  What do I do?

    Is the iPod Touch specifically stated as being compatible?  Have you tried to perfrom a hard reset of the iPod with it still connected?  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    B-rock

Maybe you are looking for