My i pod screen is white

my ipod screen has been white all day it previously did this before but fixed itself and now it wont . how can i fix it without using my home button because my home button is stuck

See Display Shows White Screen Here
http://support.apple.com/kb/TS2771
If no joy... Try letting the Battery Fully Drain... Then Charge the Device for at least 30 Minutes...

Similar Messages

My i pod screen turned white what do i do

i was on my app and my i pod screen turned complity white and i tryed turing it off and it dont work at all:(

- Trhere:
iOS: Not responding or does not turn on
If not successful and yuo if you can't turn it off, let the battery fully drain. After charging for at least an hour try the article again.
If not successful time for an appointment at the Genius Bar of an Apple store.

HT201412 i pod screen keep freezing up and sometimes turns white. how can i fix?

i pod screen keeps freezing up and sometimes turns white. happens across multiple apps / games. how can i fix?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My i-pod has a white screen and wont restore, can anyone help ?

my i-pod has a white screen and it wont restore, can anyone help?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I accidentally restarted my i pod during an update and now the screen goes white what can i do to fix it ?

ipod stoped responding and the screen turns white blue and green

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My ipod toch 2gen screen went white

my ipod 2 gen screen went white this morning. I leftmy pod on the charger all day and its still white . Ive tried the hold the sleep buttono for 10 seconds but it hasnt worked what can i do??

That symptom is covered here:
iPod touch: Hardware troubleshooting

My imessage wont work, when i open it the screen turns white for a few seconds then goes back to the home screen

WHEN I OPEN IMESSAGE THE SCREEN BLANKS WHITE AND AFTER A FEW SECONDS CLOSES IMESSAGE AND GOES BACK TO HOME SCREEN!!! HELP ME I HAVE NO IDEA WHAT TO DO!!!!

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Messages>Send and Receive and sing out and sing back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

I have OSX 10.5.7 on my Intel Mac. When I try to login using the correct password the screen goes white and just returns back to the login screen. It does not jiggle like when you enter the wrong password.

I have had a number of issues with my Intel Mac recently and had to reboot using disk utilities, safe mode, OSX recovery, but always come back to the login screen but when I type my password the screen goes white and returns to the login screen. My password is correct and the login does not jiggle as it would if the password was wrong. Please advise,

Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
Briefly, you need to delete the following file:
/var/audit/current
If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
mount -uw /
You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
Next, type the following command:
rm -i /var/audit/current
Press return. You should get the following output:
remove /var/audit/current?
If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
Finally, enter the command:
exit
Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
Credit for this solution to ASC user AnthonyTW.

Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?

Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?
The screen isn't broken because it works after i turn the device off and back on, but after it goes black once, it's only white again.
But it takes the touches although it's only white, because I can answer my phone when I slide my finger on the bottom of the screen, eventhough there in not the button to see.
This is so weird. I have already done everything I can think of that might help. But I cannot think of anything that might be causing it, because nothing has happened to the device.

Let me know if I should start a new discussion instead of opening a new topic here.
My wife's iPhone is the same vintage as mine 3Gs, but has never had the battery problem. Its affliction instead is that it cannot detect WiFi networks unless it is quite close to the source. Often, when my iPhone not only detects but shows a maximum cells connection with a network, hers cannot detect the network at all. In contrast, her iPhone seems to detect ourcellular carrier just as well as mine does.
Is there any help for this affliction?

My daughter tried to open a game on her Ipod touch and the screen went white and I can't get it to do ANYTHING...I've tried holding the sleep/wake button and it does NOTHING, still only a white screen.

My daughter tried to play the My Horse game on her Ipod touch that she got for Christmas and when she opened the game it said something about sending "push notifications" and gave the choice of "don't allow" or "ok"...we chose "don't allow". After that the screen went white and now we cannot get the Ipod touch to respond to anything. I tried holding the sleep/wake button to try to restart it and it doesn't seem to work. Any suggestions to get this device working again???

Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If that doesn't work, try a Restore:
From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad.
There's more that you can do. Post back if none of the above solves the problem.
By the way, I always allow "push." That allows the app developer to "push" information to your device rather than waiting for you to ask for it. However, "don't allow" shouldn't cause the problem that you're experiencing.

My iPod wont turn on anymore. I have had my iPod since the end of January of 2012, Last night it shut off on me. It keeps trying to reboot itself, but all it does it show the apple symbol, then the screen goes white and reboots again. I need help. :(

Hi, My name is Cassie.
I bought my iPod off of amazon just around the end of January of this year (2012). Last night I was playing around on my iPod. Listening to pandora, and editing pictures. I got to a picture and clicked edit, and then my iPod shut off. It rebooted itself and seemed to be running as if nothing had happened. I put my music back on and went back to the picture and tried to edit it again. I clicked the edit button and the ipod shut off again. This time, it kept rebooting. It went to the apple symbol to turn on and about thirty seconds, the time it normally takes to turn on, the whole screen went white and then shut off and tried rebooting again. It kept doing this over and over again. After a while, it did eventually stop, but only to a completely white screen. It was like that all night long because I fell asleep. (gave up on it). It is now the afternoon and after I held the lock button and the home button down the screen when off. I let it sit for about a half an hour, then I tried turning it on again. But it still is doing the same thing. I have no idea what I could have done to make it do this. Unfortunalty, I am not home to connect it to my own iTunes, but regaurdless, it wont even connect to the computer. I did have my ipod plugged in the whole time it was rebooting and shutting off last night. It was connected to my wall jack which normally works fine. But even having it plugged into the computer as it is now, its still doing the same thing. I am dissapointed that I might end up loosing everything that I have on it. I have not been able to sync it to my computer to save all the apps and pictures and music I have stored on it. I really do hope I can get some help or advice!
Thank You!!
-Cassie Lawrence

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

Is there a way to set the iPhone to have a black screen with white text?

I found the "Invert Colors" option under Settings > General > Accessibility, and like it a lot. It provides enhanced readability.
The problem is that it inverts all colors, even for apps. So when I view a web page in Safari, all the colors are inverted for the images.
And when I view my photos in Photos, these are also inverted as well.
Is there a way to set up the iPhone to default to a black screen and white letters for the OS, but allow the apps and photos, etc. to
be viewed in their regular colors. For example, can I run Photos to view my photos on a black background but view the photos in their
normal coloring?

I'm afraid that is not possible, maybe this could bee a step in that direction if you use the mentioned Zoom function:
Invert Colors and Grayscale
Sometimes, inverting the colors or changing to grayscale on the iPhone screen makes it easier to read.
Invert the screen colors. Go to Settings > General > Accessibility, then turn on Invert Colors.
See the screen in grayscale. Go to Settings > General > Accessibility, then turn on Grayscale.
Turn on both effects to see inverted grayscale. You can also apply these effects to just the contents of the zoom window—see Zoom on page 150.
copied from page 151 of the user guide iOS8

Hi, I accidentally spilled water on my Mac Air on the very right side of the keyboard. After a few minutes, the screen turned white and a gray folder with a question mark came up and kept flashing. THEN IT DIED HELP.

After the screen turned white and the folder popped up, it just kept flashing. After a few minutes the screen just turned white completely and I could hear the noise of the drive. It just sat there still with the noise for a good few hours until the battery died and then my mac just shut down completely. I tried to see if the computer could charge, and it does charge. I just can not turn the computer on no matter what. It is dead. It might be the logic board or the drive...I'm hoping it won't cost me a new computer because I just got this 5 months ago....

Do not attempt to charge as that will only make the damage worse. You need to take the MacBook Air to an Apple store genius bar and have the technicians check and see what repair work is necessary. It only takes a very small amount of liquid to cause short circuits and damage.

Part of the screen is white

This happened all of a sudden. Before I came home, my iPod Touch 4g was working fine. Its when I got home, the screen turned white. Its running on IOS 6.1.3 . Well, the bottom half of the screen. I have no idea what or how it happened.I tried using the hard reset but it didnt work. It still works the screen is still responsive, I can use app watch videos and listen to music. I just need to know how to fix it so the bottom part of the screen is not white and not make it a hassel. I want to know how this happened so me and others know what to do.

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My ipod touch screen went white and when i plug it into my computer....nothing happens. help!

I went to turn on my iPod Touch one day and the screen went white. Tried resetting and got nothing. Tried plugging in to usb port and got nothing. Neither the computer nor iTunes recognizes my device. What do I do now?

By resetting did you see the apple logo? Try pressing and holding the on/off and home buttons simultaneously until the screen goes blank (black) and you see the apple logo. It should take about 10-15 seconds to reset.

My i pod screen is white

Similar Messages

Maybe you are looking for