My i-tunes (11.1.5) won't open, help!

I put in a CD, but i-tunes won't open, says it stopped unexpectedly and now it's stuck on the error reporting page; won't open. What do I do now?

Press the Eject key on your keyboard.
If you can't eject a CD or DVD or open the drive tray

Similar Messages

  • My iTunes won't open help please! what should I do?

    My iTunes won't open, when I try to open it, it says:
    "The file 'i Tunes Library.itl' cannot be read because it was created by a newer version of itunes."
    What can I do about this? please help me.

    Ps.. My quicktime opens and I can search for music and play it but itunes still wont' open
    thank you kindly.
    another couple of preliminary questions aimed at narrowing in on possible culprits.
    (1) do you have Norton Internet Security 2005 installed on the PC?
    (2) reboot the PC. bring up your Task Manager, and click on the "Processes" tab. now try to launch itunes again.
    does an "itunes.exe" process appear in the Processes tab? if so, does it persist in there or does it disappear after a few seconds?

  • My Safari was updated to 5.1.9 and now it won't open - help!

    Safari updated itself a few days ago and was working fine up until this morning.  Now I click on it, it bobs up and down once or twice, but a browser window won't open.  Any suggestions for what I can do to fix it?? 

    Ideally - locate a crash report from Console application... look in Diagnostic & Usage Information - User Diagnostic Reports in the log list on the left & see if there's one for Safari dated today. If so, copy it & paste the contents here.

  • The java preferences won't open Help needed

    Hello im a new mac user and there is a problem with it every time I try to go in to Java Prefrences it starts bouncing but it won't open. Please help.

    yeah but nw the java is Oreacle (don't know if spelled right) but apparently it was mincraft bugging me (I think)
    cause right when id downloaded it it had problems
    thanks for the reply though and the info

  • InDesign won't open, help me!!

    I am doing some work for college in which I have to add text to a tif file in InDesign but for some odd reason when I click on the icon on my desktop it comes up with a message saying that it won't open, does anyone know why?

    You'll have to tell us the exact content of that error message to get help.

  • Itunes won't open - help!

    I have been using itunes for 3 months without any problem and for the past week it will not work. The problem I am getting is when I double click the itunes shortcut, sometimes an egg timer is displayed for 10 secs, then nothing. On other times, I manage to get the itunes licensing agreement on screen. I have tried everything to get it working - I've clicked on save, then agree. I've clicked on save, then disagree but itunes still won't open. I have read through the support section on the itunes website and carried out the following:
    1. uninstalled & reinstalled itunes
    2. uninstalled & reinstalled quicktime
    3. run windows clean up to uninstall itunes & quicktime
    4. rebooted PC so many times and wasted so many hours!
    I am now at a complete loss at what to do next. I still have the same problem - itunes icon is on desktop but nothing happens when I double click. Can someone please please help?
    Thanks
    Jackie

    hi Jackie!
    When I open up Task Manager, itunes application is running and I can't kill the process without rebooting my PC.
    usually i associate that "running itunes.exe process That Will Not Die" symptom with nasty version of the NIS 2005 itunes launch suppressions ... but you've got McAfee ...
    let's quickly check up on a possibility that can also result in you seeing a running itunes.exe (even though itunes silently fails to launch):
    iTunes for Windows doesn't open after upgrading
    love, b

  • GENERAL ERROR WON'T OPEN HELP!!!!!

    for a few months now, i've had a problem that, every week or so, won't allow me to save. I've since gotten over it (i never found a solution) by exporting it to a quicktime file every time it happens, so i can re-import the changes i've made that day. Today, it gave me the error message again (it reads: "Unknown error: cannot save"), and so i exported it and quit w/ out saving. But when I restarted it (and eventually the computer) nothing will open and i get "general error" message (no ID #). I have sifted through other posts, but no one seems to have the exact problem as me, or else nobody offered a solution. I've made this entire project w/ FCE 2.0.3, I've trashed prefs, i've tried opening from an autosave... nothing. This has nothing to do w/ exporting to quicktime movie or logging/capturing, which i have seen other people have trouble with.
    also, found today that it is only this project that seems to be corrupted- others will open. but i still need this project!!!
    fyi, yes this has been cross-posted in the FCE forum, but a) nobody answered it there b) some people only check this one and c) i find a LOT of problems apply to both systems

    Did you get your answer in FCE forum?
    Corrupted projects happen often when you bring a Photoshop file in that is in CMYK space.
    If you can find that file -- remove it.
    Or -
    Move your scratch folder to another location... move all your title files and pic files to another location.
    Your project file should open then and you'll be asked to reconnect the media. DON'T. Reconnect one by one from the application's browser until you get the corrupted file.
    Re import that file (as I assume...) into Photoshop and change it RGB space. Then reimport.
    Good luck,
    CaptM -- I'm awesome too AND a real Captain!

  • ITunes hates me and won't open  HELP!

    Basically, every time I try to start up iTunes, it says there was an error and the program had to close. I've tried reinstalling iTunes to fix missing programs etc. and I've tried changing some of the audio settings like the support page said to, but it still keeps saying there was an error. I also tried the handy-dandy debugging button, but then it says "An exception 'Unhandled Win32 Exception" has occured in iTunes.exe. However, no debuggers are registered that can debug this exception. Unable to JIT debug.' Unfortunately, I don't understand computer jargon, and am technologically challenged haha. Any suggestions?
    <3
    <br>
    Dell   Windows XP  
    Dell Really Old 1000   Windows XP  
    Dell Really Old 1000   Windows XP  

    I tried what you suggested, but iTunes still won't work. Do you have any other suggestions?
    Thank you!
    <3
    P.S. If I were to entirely uninstall iTunes 7 to reinstall an older version (I don't really need the fancy stuff I get with 7) would I lose all of my music?
    Thanks again, you've been extremely helpful so far, I appreciate it!

  • One website won't open, help!

    When I try to go to the Verizon homepage, it either will not load at all, or the sign-in module portion won't load. The error message is the sad piece of paper and it says: Google Chrome could not load the webpage because signin.verizon.com took too long to respond. The website may be down, or you may be experiencing issues with your Internet connection.
    This is the only site that has issues. It was working fine two weeks ago. My internet (Time Warner) and router (Linksys) walked through various steps with me and say it is not them. When my computer is plugged in directly to internet, the page loads. When my computer is on my work wi-fi, it loads. It only doesn't load in my wi-fi at home. Was told it may be Firewall issues with my router (Linksys) but they did troubleshooting with me and said it must be my computer / the website. Please help! I've gone through the following steps based on other forum responses to similar questions and nothing has worked so far.
    1. Restarting computer
    2. Clearing cache, etc...
    3. Removing Verizon from keychain
    4. No Proxies are selected in "Network", Bypass proxy settings for these Hosts & Domains is: *.local, 169.254/16
    5. Added 8.8.8.8, 8.8.4.4 to DNS Servers in "Network"
    6. Created "Test" under "Location"  in "Network"
    7. Parental controls are not on
    8. Used Terminal command: cat /etc/hosts 
    Response matched what was recommended that it should be:
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting.  Do not change this entry.
    127.0.0.1 localhost
    255.255.255.255 broadcasthost
    ::1             localhost
    fe80::1%lo0 localhost

    As a test try using another browser like Safari or Firefox.
    Firefox

  • Installed iLife08 - now Epson Print CD won't open - HELP!

    Hi everyone, not sure where this belongs. I recently installed iLife '08 and have just tried to use Epson Print CD for my R230, and it won't even open. It flashes briefly on the dock then just disappears.
    HELP PLEASE!

    There was nothing wrong with the software. All working perfectly fine UNTIL I installed iLife '08. Anyways, after googling various possibilities, I downloaded an application called OnYx, did a dust and clean and all is good! Thanks anyways for trying to help!
    PS. My disk utilities didn't do the trick but this other thing did.

  • Final Cut Express Won't Open - Help!

    Hi, I had been using Final Cut Express successfully for the past six months... until ast week, when I (too hastily) deleted the contents of the Final Cut Express Documents folder to clear up space. Since then, FCE won't start. After I click on the application icon, the program seems to start up for few seconds, but then it crashes.
    I have tried to reinstall FCE by deleting all of the files (following instructions I found online), but the same problem occurs.
    Anyone have ideas? Any help would be great appreciated. I need FCE back!
    Thanks.

    Have you updated anything or added any software recently?
    Try trashing the preferences exactly as described here:-
    http://www.fcpbook.com/Misc1.html
    Also, when you uninstalled FCE did you do it like this?
    http://docs.info.apple.com/article.html?artnum=301182
    It would also help if you told us the exact version of FCE and computer specs etc..

  • HT201210 My iphone is in recovery mode and it won't open help

    I tried to install the new version of iOS via itunes and at the end of the installing it stopped and showed an error massage says "iphone couldnt be stored error (14)" and now my iphone is in recovery mode I tried to open it with DFU mode but it didnt work out HELP

    What "new version" of iOS did you attempt to install, exactly?
    Here is troubleshooting information specifically for the error 14 you mentioned: http://support.apple.com/kb/ts3694#error14
    Error 13, 14, 35 and 50 (or -50)
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.

  • Itunes will not open/launch on my desktop. There is no systems error message etc. It just won't open, help?

    My Itunes will not open/ lauch on my desktop. There is no systems error message etc. It just will not open, help?

    reset utility should help...for mac
    http://www.apple.com/support/downloads/ipodresetutility103formac.html
    for windows
    http://www.apple.com/support/downloads/ipodresetutility104forwindows.html

  • Oh NO! iTunes error -50, now won't open, help!

    I was editing some song data, I received a -50 error - stating the library sould not be saved. I kept getting the error, tried closing but it locked up. So I had to force quit. Now when I open iTunes, it checks the database, then I get the text menu at the top of the screen, but that's it. What can I do to fix this?
    I'm a DJ and I use iTunes daily to sort my data. Although I don't "DJ" with iTunes, I do use it all the time to import, add and sort my music. Please, what can I do to fix this?
    My library has nearly 40,000 titles! Right now iTunes is open on the Dock, the Menu bar is at the top, but no iTunes window (with the library will appear)
    Message was edited by: powermixx

    Solved?
    Once I disconected my iPhone and 3rd Gen ipod, iTunes popped open. I was going to recover from my latst backup (a week ago) but it seems to be working. I've edited, closed and reopened and it appears to be working. But I've learned that I am going to write another script (I used to have one) that I can click to backup my iTunes library data. I will place those backup files ON my external HD (where my iTunes music is). This way, I don't have to rely on a Time Machine backup - which is different external drive.
    Message was edited by: powermixx

  • Unix executable file won't open HELP!

    I am having the same problem as one other person, my word folder has changed to a Unix executable file and I can't open the content in the folders anymore.  I was just using the folder yesterday and now they are now working.  Please help!

    I'm not sure if this is your problem. But I was futzing with a file, and  intentionally removed most of it's attributes, as reported by the mdls command.
    I was able to get enough of them back, for the file to be recognized by the finder again.
    This command lists the different importers.
    $ mdimport -L
    find the one that matches the filetype. Then run the following, where testfile is the file that you're having problems with.
    mdimport -g /System/Library/Spotlight/XXXXXX.mdimporter testfile
    I don't use Word, so I can't tell you the name of the importer file that you need. It may be possible to just
    run
       mdimport testfile
    Nils

Maybe you are looking for

  • Migrated to new MB Air version 3 and iPhone no longer syncs to iTunes

    Just purchased the new version 3 MacBook Air and used the migration assistant from my version 2 MB Air. My iPad will sync with the new version 3 MB Air, but my 3G iPhone is no longer recognized by the MB Air and will not sync with iTunes. I reloaded

  • Black and white bar screen x230

    Since recently my laptop shows a big black and white bar after booting. After applying a little force to the screen i get different colorsLike so: And after applying some more force, not too roughly of course, it is all fine again. However im afraid

  • Firefox.exe: Ordinal number 491 was not found. Urlmon.dll.

    When I start Firefox I get an error message telling me that the Ordinal number 491 was not found in the DLL library. Urlmon.dll. I can still use firefox, but it's quite annoying. I've tried reinstalling.

  • Right click in data modeler only shows "properties" choice

    Hi: I've been playing with the data modeler for an existing schema and I am unable to follow the directions in most of the tutorials because supposedly right-clicking on a table in the diagram or on within the data modeler browser is supposed to brin

  • HT1688 Is anyone having issues with iOS7 Siri? (iPhone 5s)

    On multiple occasions during the day I'll ask Siri to remind me....  With a long pause she'll say "I'm really sorry but I can't take your request right now please try again later.  Then I'll try right after and she'll work.  Very frustrating.  iOS6 w