My i tunes will not load from my desk top

When I double click on the desk top icon for itunes nothing happens.
Any ideas?

Hello jamieg1984,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Restoring your iOS device
Connect your device to your computer.
Select your iPhone, iPad, or iPod touch when it appears in iTunes. Select the Summary tab, and click the Restore button.
Click Restore.
iTunes may prompt you with a software license agreement. If you click Agree, iTunes will download the iOS software file (.ipsw file) before restoring.
After a restore, the iOS device restarts. You should then see "Slide to set up". Follow the steps in the iOS Setup Assistant.
If needed, restore your device from a previous backup.
Best of luck,
Mario

Similar Messages

My printer will not print from my desk top

recently my printer will not print from my sesk top did something happen or do i need to re register or what

Hi tonicooper, Welcome to the forum and sorry to learn that you are having this issue.
I will need more information in order to be able to attent to help you, Please take a little bit of time to read this post it will explain you on how to post your question for better change to find other forum users to offer you assistance with your problem Click here
After reading this post, Please update the thread (post again) in order for me as well as others forum members to able to assist you.
Best of luck;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Firefox will not open from my desk top anymore. I can't change my profile if I can't get to it!

Yesterday (1/19/13) morning, my Firefox opened fine and it was business as usual. Yesterday afternoon, I clicked on my desktop icon, the little circle spun for about 2 seconds then stopped. Firefox would not open. This morning, the same thing happened. I removed Firefox from my computer, re-downloaded it, and it worked...until now (about 1 hour later). The same thing is happening again. Firefox does not show up on my task-manager.

Me too!! Please let me know if you figure out a way to fix this. I ran the Safety scan and it still will not load. If anyone knows how to go back to the previous version please let me know. Thanks.

Java console not accessible, will not load from FFx tools dropdown menu (had same prob with 3.6.15). Latest Java installed and IS accessible thru control panel

XP OS, have NoScript installed, disabled, Java console still will not load from FFx.

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

Itunes will not load from external hard drive

My Itunes will not load from my external harddrive. worked fine a few days ago.

I do not have any exclamation points - missing songs do not show at all. I had to click 'locate files' when I opened iTunes after reorganizing, since there was nothing there anymore

HT1338 How can I get my photo to work again? the app will not open on my desk top any more. I can not dave my photo on my desk top

How can I get my photo to work again? the app will not open on my desk top any more. I can not dave my photo on my desk top

Hello, Cubby21.
Thank you for using Apple Support Communities.
Here are the best resources for troubleshooting issues with Message.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Cheers,
Jason H.

A single tune will not load...

Have a new 7th Gen 160 GB classic that will not load Kashmir by Led Zeppelin. itunes converted and loaded all 10,000 of the other tunes on my new ipod. I tried to convert the single file...no go. Then I tried the backup of the mp3 file with the same result. Then drug out the CD that was used to load the music. Nothing.
Thoughts from anyone?

So currently, what format is this track encoded in and does it play okay in iTunes?
If it does, how is your iPod configured to sync music from your iTunes library? In other words, what settings do you have enabled from under the iPod's Summary and Music configuration panes in iTunes?
B-rock

TS1424 Rented movie will not load from iTunes

I have been trying, without success, to watch a movie that I rented from iTunes. It will not load, loads after waiting for ages and then plays 2-3 minutes and stops. I have a 50MB connection so download speed is not a factor.
How do I contyact iTunes and request a refund?
I have now bought the movie!!
Thanks
Stebe

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

Embedded asset will not load from aliased domain

I have a flash movie with an embedded flash movie that uses the get_URL to load an externally linked movie. The file works fine if coming from the root domain, but we also have three different domains virtually hosted to the same web root and the embedded movies will not load if accessed from those other domains. Current external URLs are absolute and not relative, still no loading:
www.topconpa.com
www.topconprecisionag.com
please advise
Steve

Ok, since I am stuck I did a complete DE-install/Re-Install of all Flash Players and Flash Builder. Clean slate. Thats not it.
As I have multiple web sites and bounce between Mac and Windows, it can be challenging to keep track. I had been using the Firefox FireFTP Addon to move files around as it was convenient. This was the problem. Simple answer is FireFTP was doing something wacky (?) to the SWF files when going from Windows to the Linux hosts. Using the builtin Microsoft Network Places FTP client or the excellent Transmit 4 on Mac OS X both resulted in working SWF files from my web sites.
Final Answer: the FTP client messed up the SWF file. Gotta watch that!

W540 will not load from SSD, need help

I just bought a W540 (windows 8) and extra SSD to replace the original HD in W540.
I have created a recovery image in windows 8 to my 16G USB flash and disabled intel rapid storage.
I put the new 512G Crucial MX100 SSD into the machine, and use USB flash drive to reset the laptop.
After the reset process was finished, I took out the USB flash drive, but the laptop will not load windows from my SSD, and the laptop did detect my SSD.
I am wondering if I did something wrong? I took out the SSD and put it in to my desktop, and I did see files were written into the SSD, but W540 will not load it,

The reason for your machine not booting might be found here:
Windows 8 Recovery Fails to Install on New Blank SSD
It does not give any info if the Recovery Media actually formats the drive in GPT mode, which is required for UEFI boot, in which case you might have to re-format your new SSD and re-install it with your recovery USB, which you're probably required to boot in UEFI mode as well. I have only installed Windows 8 in UEFI mode with an original retail DVD, and to achieve that I had to boot the DVD in UEFI mode.
HOW TO: Use the Diskpart.efi Utility to Create a GUID Partition Table Partition on a Raw Disk in Win...
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

After installing 4.0 firefox will not load from short cut or program

ckicking ico or program will not load. reinstall 4.0 works but when closed it will not reopen.

Do you get any error messages?
Make sure that Firefox closes properly and that there isn't a hanging Firefox or plugin-container process left in the task manager.
*http://kb.mozillazine.org/Kill_application
Use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.
See also:
*"Hang at exit": http://kb.mozillazine.org/Firefox_hangs
*"Firefox hangs when you quit it": https://support.mozilla.org/kb/Firefox+hangs
You can use one of these to start Firefox in <u>Safe mode</u>:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
-----

Safari will not load completely, just the top line

safari will not open completely, just the top line appears. I have an Imac oper at 10.5.8

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Laptop will not load from restarting screen. Help!!

Hi,
     So I had this problem for a while that every time I used my Macbook Air a message popped up saying 'Start up disk full make space by deleting files' or something like that, so I deleted lots of files that I didn't need. (However my storage is still almost full with 'Other'?)
     So after I had done this my computer froze on some work I was doing so I pressed the power button in order to restart. Since then (yesterday) I haven't been able to access my desktop and files as the screen will only load the start up screen, with the gray apple and spinning wheel, but not progress past this point. I have tried performing the Hardware test and also pressing 'cmd' + 'R' whilst restarting, but nothing seems to work.
Please help!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
     a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Bookmarks will not load from dropdown menu

Hi,
i copied a lot of bookmarks over from safari to add to my existing bookmarks in firefox. The import seemed to work fine at first but soon i found that the drop down menus for my bookmarks toolbar would not load. Sometimes some and not all will load, sometimes not at all. If I open a sidebar, I can see that all my bookmarks still exist. Some have picture icons next to them, some have a blank white page icon. The ones with the blank page icons don't load from the sidebar.
I'm not the most technical and it took me hours to arrange my bookmarks. Any fix for this without having to start from scratch would be really helpful.
thanks!
Henry.

You might try Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
If your Shutdown functions correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
EDIT: Also, if you can launch Activity Monitor in your Utilities folder and see if you can find the process that is still running.
-mj
Message was edited by: macjack

Image will not load from lightroom to CS5

I am having an issue with external editing from lightroom to CS5! From develope>edit in CS5>images does not load! CS5 loads but the MAC finder app comes up asking me to choose a file! Never have I seen this. I looked into the preferences and the external editing, but its in the external editing already. Help!

Make sure your external editor settings link to the application in support files (hidden on Lion) rather than a shortcut.
http://kb2.adobe.com/cps/909/cpsid_90947.html

My i tunes will not load from my desk top

Similar Messages

Maybe you are looking for