My I tunes wont connect
It says I tunes cannot connect to the music store make sure your network connection is active and try again
My nework connection is active though and it still wont let me
Do you have a firewall (either Hardware e.g. in a router, or software) that may be blocking the connection to the iTMS? If so you may need to configure the firewall to allow access to iTMS - usually by putting it in a trusted zone.
Similar Messages
-
for some reason i tunes wont connect to my i pod touch beause of unknown error. Does anyone know whats going on?
You seem to have a lot of #fff codes in the CSS files that obviously aren't found with the long #ffffff search term (#fff finds them)
Make sure that the match case box isn't selected on the Find bar (Ctrl+F) -
i tunes will not connect to itunes store
The iPhone is not recognized by iTunes when connected to your computer?
You don't sync or transfer music from your iTunes store account, you sync or transfer music from your iTunes library on your computer which can include music purchased from the iTunes store and/or music imported from music CDs or that was acquired elsewhere. -
My Itunes Account wont work on my laptop, how else can i connect it to my phone?
You have not supplied enough information for anyone to help you. What do you mean your iTunes will not work? You cannot open the program, you cannot sign in to your iTunes account, iTunes does not recognize your iPhone is connected????
All of these questions can generate different answers. You need to supply more specific information, then people may be able to help. -
ok so im locked out of my i pod touch, and i cant remember my password, and it wont connect to my i tunes... is there a way to reset or get into my i pod
Please read Appendix B.
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
My apple tv wont connect to i tunes store, but it will to net flix
my apple tv wont connect to i tunes, but it will connect to netflix
Youtube is a different service and server.
Check the network
What is the current connection, use speedtest.net
If on wifi try ethernet
Make sure router is up to date. DNS should be set to automatic (settings - general - network)
Go to istumbler (Mac) or netstumbler (PC) to get a report of the network, look for signal strength and noise. -
My i-phone wont connect with i-tunes
my i-phone 3gs wont connect 2 i-tunes 4 some reason
are you on latest version?
did you reboot your computer?
is it properly connected?
are you using a usb hub? if so, dont. -
my i-phone wont connect to i-tunes i canceled the update by accident, can anyone help?
You can try entering restore mode. See: http://support.apple.com/kb/HT1808
-
HT1386 i phone wont restore and now it wont connect to i tunes
I called at&t about unlocking my phone becase im overseas right now, and during the restoring process it failed and now my phone wont connect to i tunes or anything.
This worked!
Nothing worked until i finally went to 8.1.10 FIRST. I had this same problem last week, updating a customer’s 3G to 3.0 from 2.2.1, on a MAC (using iTunes 8.2.1)! I tried on 2 different macs, 2 different sync cables, a bootcamp Vista SP1 on my MBpro and then XP pro SP3. All registered a 1602, 14 or 16 error everytime, about halfway through the update on the iPhone. I also tried removing the old 3.0 update and prefs file from the user data > app > apple directories with no luck. Also tried reinstalling itunes on the Mac.
What finally worked was:
uninstall itunes (if you have anything above 8.1.10).
move your itunes library file (for windows, it’s located under the iTunes directory, usually called iTunes Library.itl). You want iTunes to create a blank file since your 8.2.1 upgraded itl file won’t work with 8.1.10.
put your ipod into DFU mode
restore your iPhone to 2.2.1 using iTunes 8.1.10 (go here to download older versions of iTunes)
use the same site above to download 8.2.0 (not 8.2.1).
install 8.2.0 and connect your iPhone. It will notify you about the update. Download & install the 3.0 update (if you uninstalled, the 3.0 update should be deleted).
upgrade back to 8.2.1
move your library (itl) file back. To be safe, I would hold the shift key down to select your 8.2.1 file (even if it’s named the same as the one you created from iTunes 8.1.10).
1 hour later, I have everything updated. All I can say is that there’s a bug in 8.2.1 that wasn’t there in 8.2.0. I updated my iPod Touch first gen no problem with 8.1. Hope it works for others.
iPhone 3G iPhone OS 2.x Upgrade from 2.2.1 to 3.0 -
hi i just got a second hand i phone and was told to reset it via computer in i tunes i have done so but phone wont work ..symbol showing connect to i tunes is showing on phone but when i connect to i tunes it wont connect at all
http://support.apple.com/kb/HT1808
Try this -
updated software on iphone 3gs on sunday and now phone has stoppped working, almost as if the phone has been wiped of all hardware!! when trying to add new device to system computer keeps aking for disk that came with device, and obviously the iphone doesnt come with one!! all thats displayed on screen is usb logo and itunes logo, but my tunes account wont connect!! is phone nakered? help with this would be great!
Have EXACTLY the same issue thePOPEofDOPE420, tried the setting> general> reset> reset network setting suggestion - but this does nothing. Still the issue persists.
WiFi - internet works great. As soon as it's off, status bars showing a full signal, 3G but the web page/Facebook app/App Store just hangs and won't load.
Not sure who to contact - T-Mobile or Apple? -
Just updated itunes and it wont connect to internet
just updated i tunes and it wont connect to the internett to recognise songs/albums?? anyone else?
Hi there dale333!
I have an article here for you that can help you troubleshoot this issue with your connection to the iTunes Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
Zen Vision M wont connect to my PC after i've formatted my PC & reloaded Window
Hi.
My Zen Vision:M wont connect to my PC after I formatted my PC & reloaded WindowsXP.
Before this it was Ok. Now, when I plug in the usb it detects the player, but the drivers WILL NOT load. It shows up in system--->device manager--->? driver not installed.
I've tried,
-removing creative installation software (which came with the player)& re-installing..
-updating my systems BIOS & USB drivers.
-running regedit & ticking 'allow read' in USB's (as explained in creative troubleshooting)
-turning off my firewall.
I connected it to my sisters computer running Xp & it connected without problems.
Why wont it connect to mine
JasonOK now, I am not the smartest computer dude and this is not the magic cure but it did fix my problem with WMP0 and Creative software not noticing the player and the driver having issues. I was also having issues with a new external hard dri've.
I tried everyhting to fix this thru creative support which did respond to all my inquiries thru email, but nothing worked. I mean nothing. Reinstalling software, WMP0, manually searching for drivers, deleting USB ports so Windows could reconfigure, pulling out all USB peripheals except mouse, BIOS settings and updating drivers on motherboard.
Now here is how I fixed the problem:
I bought a new USB 2.0 PCI card to stick in my motherboard from NEWEGG for 8.99 plus 5 bux shipping. It was a wing and a prayer, it was plug and play and so easy to set up. It auto noticed without having to install drivers, even though a NEC chipset driver set was availbale on the disc provided. It noticed it and said I was good to go. I was still apprehensi've upon plugging my ZEN in , but saw stuff I hadn't seen b4 then went to WMP0 and There she was saying lets play. Creative noticed it tooo and starting DLing tunes.
My external hardri've works great now tooooooooooo.
It was a SYBA USB PCI 2.0 card on NewEgg.com and it got here in 4 days. 4 external and internal port and is 5 star rated by over 60 revieewer that bought the product. If this does not work u are only the 5 percent restock charge and so all u would lose is about a dollar.
Please let me know if this is of any help for anyone out there. <IMG height=6 src="http://forums.creative.com/i/smilies/6x6_smiley-very-happy.gif" width=6 border=0>
And no I do not work for SYBA, but just so happy that I finally got all my stuff to work. Seems a lot of people out there have the same exact problem as I did. -
Macbook pro wont connect to internet using cable, but connects using wifi fine
My macbook pro wont connect to the internet using a cable, but connects using wifi fine. I use wifi at home but sometimes need to use my laptop at work and connect using a cable but it says i'm not connected to the internet?
Can you open a terminal and invoke the following commands:
ping -c 10 localhost
and
ping -c 10 google.com
You should normally get something like:
PING google.com (74.125.224.103): 56 data bytes
64 bytes from 74.125.224.103: icmp_seq=0 ttl=55 time=19.053 ms
64 bytes from 74.125.224.103: icmp_seq=1 ttl=55 time=37.692 ms
64 bytes from 74.125.224.103: icmp_seq=2 ttl=55 time=46.988 ms
64 bytes from 74.125.224.103: icmp_seq=3 ttl=55 time=33.466 ms
64 bytes from 74.125.224.103: icmp_seq=4 ttl=55 time=28.940 ms
64 bytes from 74.125.224.103: icmp_seq=5 ttl=55 time=58.070 ms
64 bytes from 74.125.224.103: icmp_seq=6 ttl=55 time=33.335 ms
64 bytes from 74.125.224.103: icmp_seq=7 ttl=55 time=33.361 ms
64 bytes from 74.125.224.103: icmp_seq=8 ttl=55 time=36.099 ms
64 bytes from 74.125.224.103: icmp_seq=9 ttl=55 time=41.111 ms
--- google.com ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 19.053/36.811/58.070/9.939 ms -
so the ipod connects to my brothers computer fine but it wont connect to myn... it doesnt show in my computer but when i plug it in and out it makes the little connect sound and it doesnt charge on my computer either,,, my ipod nano however connects fine to my computer fine.. any solutions?? please help
Try here. Look especially at the driver and service topics. The iPod touch uses different drivers thant the Nano
iOS: Device not recognized in iTunes for Windows
Maybe you are looking for
-
SRM 7.0: Classic Scenario no PO is created only PR is generated
Hi Gurus, I am working on SRM 7.0 - Classic scenario. When a shopping cart is complete in terms of price, vendor (assigned) and other required data, item stays in transfer process. If a SC is incomplete a PR document is created in backend without a p
-
HT3819 Can you home share with two libraries on the same computer?
Can home share be used with two libraries on the same computer?
-
Dot source/calling a function with switch from the cmd line
Hi This is driving me crazy and I know its something really obvious. If I have an example script like so, called myexample.ps1 [CmdletBinding()] param [Parameter(Mandatory=$false, HelpMessage="My Switch")] [switch] $Myswitch, [Parameter(Mandatory=$fa
-
ImageIcon can not be drawn and NullPointerException was thrown
I have a dialog that displays list of items whose cell renderer is customized using ImageIcons. Permissions have been granted properly, I think. The dialog can be shown but it can not draw it's children element correctly. And java.lang.NullPointerExc
-
Spray validation TextField placement
Hi everyone, I am having possibly quite easy problem for most of you with placing Spray validation TextField. I am trying move to the left this field by fixed number of pixels. My code looks like: <!doctype html> <html> <head> <meta charset="utf-8">