My i5 won't send MMS messages.

Whenever I try to send an MMS it says cannot send message. "MMS messaging needs to be enabled to send this message".  I have enabled imessage  and send as SMS also.

Go to Settings>Messages  scroll down and see if MMS Messaging is enabled.   If it is, contact your carrier and ask them to enable it on your account.

Similar Messages

  • Updated to 3.0, Won't send MMS messages?

    I recently updated my iPhone to the 3.0 software and under my ROGERS iPhone value pack it tells me i get unlimited MMS messages but right now I am unable to send MMS messages. My phone tells me that it has sent them but 3 of my friends who all have iPhones with the 3.0 software are not recieving them, and they are getting error messages when they try to send them.
    Help please?

    You have to specify an mms apn under 'Cellular Data Network' in Settings, General, Network - you might also have to specify the mms proxy and mmsc, which you'll have to contact your provider to get. Alternately I believe it's possible to find the information for MMS setup with Rogers on the internet, just google it(tm).
    I should mention though that I believe I've found a bug (detailed in another of my posts, see http://discussions.apple.com/thread.jspa?threadID=2047179) which renders internet tethering unavailable if mms apn isn't the same as cellular data apn.

  • My 4s won't send picture messages and I reseted the network and the mms is on. HELP?

    Just got this 4s and it won't send picture messages. I reseted the network and the mms is but it still won't send. Help please?

    http://support.apple.com/kb/ts2755
    double check that you have MMS turn ON.
    if the link doesn't help, then contact your cell phone provider as MMS is a carrier feature.

  • KIN One m won't receive mms messages

    My KIN ONEm won't receive mms messages, I've had the problem once or twice before and every time it's happened it shows this error message "someone sent you a message but it can't be retrieved right now" with the error code "3-4003" it's fixed itself in recent times, but this time it's been going on for a few hours and it won't get fixed, what should I do?

    I had the same problem and fixed it by going into:
    settings, wireless & networks "more", mobile networks, then you need to "enable" data access over Mobile networks
    It will then have a check mark on "data enabled"
    After I did that I immediately was able to send and receive MMS.

  • Revolution Won't Send MMS

    My Revolution won't send MMS! I would like to fix this problem, but am unsure how. Please help.

    Hello ediepenh,
    Sending pictures is fun, creates memories, and is a big part of using our phones. If this did not work for me when using my phone, I would be upset and would want it corrected as soon as possible.
    Thanks very much, Ann154, for your suggestion. Ediepenh, have you been able to send a picture since posting? Are you able to receive messages? To test your incoming and outgoing capabilities for picture messaging, please send a picture to your own mobile phone. If you receive the picture, you are able to both send and receive pictures.
    If you are still having issues with this, please let me know by sending me a DM with your name, mobile number, and a contact nubmer to reach you. I will be happy to assist you further and provide you with a resolution. 
    Thanks!
    Christina B
    VZW Support
    Follow us on Twitter @VZWSupport

  • My macbook pro with ret. won't send text messages!

    my macbook pro with ret. won't send text messages ever since i got the new iPad air 2 i entered the verification code and allowed it to send and receive and it still won't work both are allowed to send and receive i even tried just putting one but still won't work on my laptop...

    my macbook pro with ret. won't send text messages ever since i got the new iPad air 2 i entered the verification code and allowed it to send and receive and it still won't work both are allowed to send and receive i even tried just putting one but still won't work on my laptop...

  • My iPod won't send a message even though it has full wifi

    My iPod touch won't send a message to all the people in my message conversations list even though I have full wifi! They have already sent a million messages to me but I can't send one back now it just says messages not delivered!

    The three steady beeps indicates no ram or failed ram. Try removing and reseating the ram first. If that doesnt help take one module out and try with just the other one. Still no good, try only the other module. You'll also have to swap slots with the modules. You'll hopefully eventually isolate the problem to one module,
    If after all the testing you still can't get it going you'll need to take it to your Apple Store or AASP for service as you may have a bad ram slot.

  • TS2755 I am unable to send mms messages .

    I Am unable to send mms messages. I've tried restarting phone etc but still not able to send them .

    MMS is a carrier function.  Make sure your carrier has enabled this on your account.

  • HT4623 Why can't I send MMS messages on IOS 7.0.2 from my Iphone 4s on Straight Talk?

    After upgrading my Iphone 4S to IOS 7.0.2 I no longer can send MMS messages.  I have already reset the network settings several times.  This is very anowing and I have lost sales because of it. 

    Ask straight talk why you can't send MMS - since it is a carrier feature.
    are you provisioned to use MMS?  Do you have MMS turned ON.
    troubleshooting message http://support.apple.com/kb/ts2755

  • My iphone5 won't send picture messages

    Hi my iPhone 5 won't send picture messages any ideas ? I've tried turning wifi off still won't send , turning the phone off and on same again Wong send ....... Can anybody help ? Thanks

    not sure what carrier you are using but i use straighttalk and had same issue....here is how i resolved it
    1. delete any profiles you have saved settings>general>profile  delete if you see profile there if not go to step 2
    2. turn on wifi (my internet was also not working)
    3. open safari
    4. type iapnupdatetfdata.straighttalk.com
    5. download profile
    6. turn off wifi
    7. turn off phone
    8. turn on phone
    my internet and pictures worked after this, any user, any carrier, no issues....hope this is helpful!

  • My mobile device won't send picture messages

    I have a problem where my mobile device simply won't send picture messages.  I have clear reception right now.  I've tried shutting the phone off and restarting it and taking out the battery.
    Why am I paying for a service that doesn't work?
    Anybody know what the problem is?

    You can call customer service and have them check the provisioning on your account to be sure that picture messaging is enabled.
    SOme things that may affect picture messaging:
    1) 1X service only - you need EV service to send picture messages
    2) Your phone says Extended network - picture messaging will be unavailable.
    3) You have a total data block on your phone, to prevent data charges. It also prevents picture messaging. You can block mobile web, and downloads separately, without blocking picture messaging.
    If none of these seem to apply, then I'm at a loss. What happens when you try to send a picture message? Do you get an error message?

  • Cant send mms messages over 25kb

    I am with A T and T and have a blackberry curve 8310.  I just now started having trouble sending mms messages most notably pictures that are larger than 25kb in size.  I have unlimited everything on my plan.  Can someone help?

    I do believe the hard cap is around 300kb for AT&T, and I know i routinely send those near that mark. Have you done a battery pull on your device to see if that resolves your issue? With the device powered ON, remove the battery for 10 seconds then put it back in. Let it boot normally and give it a go.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Accept as Solution" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the Star on the left of their post.

  • C3-01 - Can' t send MMS message but can receive an...

    Hi,  I am having issues with sending MMS messages.  I believe I have all the correct AT&T settings as I set them up and even spoke with AT&T and they sent them to my phone.  I can send an MMS message, send and receive texts, access email via the AT&T network and everything else, but I can't seem to send a picture message.  Is there some unique phone setting that I a missing?  Any help would be greatly appreciated.  Thanks.

    Pretty sure it will be a carrier issue, I had similar problem with my phone recently, and Vodafone emailed me the manual configuration settings, which I entered manually, now it's all working fine ! Contact AT&T again !
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Why can I not send mms messages on my iPad???

    I can't send mms messages on my I pad???

    Not likely,
    An ipad is not a cellular phone even if it has a cellular module, that module is for data only so sms/mms messaging is not available to an ipad with using a third party app that transfers the messages from voip to cellular phone networks.
    So messages on an ipad is an Apple only protocol and only works to other Apple users that have also registered their devices with messages, attempting to send to a user with a different device (android for example) will simply fail.
    Here is a support article for trouble shooting messages:
    http://support.apple.com/kb/TS2755

  • Won't send MMS before and after doing froyo 2.2 update

    Soooo, last night my phone decided to stop sending MMS messages. I could recieve just fine, but not send. Just got the standard "failed" message. I did notice that this mainly happened when I went out of 3G service, but still had full bars...the 1x box was replacing the 3G box.
    I've never had any issues even in the middle of no where Wisconsin until yesterday. I live in a larger city, so reception is not a problem..I have 3-4 bars at any given time. So I decided to try a software update (froyo 2.2) which now I am totally regretting. I've also done *228 and a soft reset (taking battery out for 10 seconds). Trying to avoid factory reset. Phone is still not wanting to send MMS messages.
    Thoughts, advice, etc?

    AEisele wrote:
    I cannot send videos, pictures go through fine but videos are pending for at least an hour before any go through, and others never send at all. I tried everything: factory reset, *228, soft reset, and checked for updates. Nothing worked so I called VZW and got a replacement phone, only it does the same thing. It's driving me crazy and I don't know what else to do. Help!
    Hi AEisele! Sure am sorry about your messaging issue. I've got a few ideas why this is happening, though. Can you send me a personal message with your name, a callback number (not the number of the phone we need to work with if you can help it) and a good time for us to speak? Thanks!

Maybe you are looking for

  • Formatted Search for Delivery Date field in SO not working

    Hi All Can anyone help me as to why my formatted search is not working? I am currently using SAP B1A SP01 Patch 19. I have created a user query as follows: SELECT $ [$10.0.DATE] + 5 When I add this to the delivery field within the Sales Order and bri

  • Strange Problem.. File to Idoc... RCVPOR is missing in control Records.

    Hi All, File to Idoc: Sender : Party : PT_ABC Business Service : BS_ABC Note : I provided the LS name(PARTABC) for BS_ABC Under Adapter Specific identifiers. Receiver : Business system (Without party) : BS_DEV_R/3 In the IDOC receiver communication c

  • Jar files and Main-Class attribute

    Sorry, I know there are other topics regarding this argument but none of them helped me solving my problem. I've tried a thousand time in every possible way, but I still can't run my application from a jar file. I've got a package called client, whos

  • Question for Vikas

    Hi Vikas, I am trying to replicate what you suggested at Re: Clicking anywhere on report row for clicking anywhere on report row, but when I click on the row it does not seem to work. this is how it looks like :- http://htmldb.oracle.com/pls/otn/f?p=

  • How is the com.sap.runtime.logon.par implemented?

    Hi all I want to make some changes to the logon.par file such that if the user authentication fails, I have to fire a custom RFC to check if the user exists in that backend system. First of all, I have no clue about how I am going to implement this.