My IBM blade server Lost all the Interfaces its running oracle linux 6.3
Hi am moses i installed oracle linux on ibm blade server and installed the ethernet, iscsi and fcoe drivers and it worked fine. but after there was an electrical blackout my oracle Linux server lost all
the eth* interfaces. Please assist on what to do because it contains installed application and we don't need to format it.
The out put for dmesg is this:
io scheduler cfq registered
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 65 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 66 for MSI/MSI-X
pcieport 0000:00:02.2: setting latency timer to 64
pcieport 0000:00:02.2: irq 67 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 68 for MSI/MSI-X
pcieport 0000:00:11.0: setting latency timer to 64
pcieport 0000:00:11.0: irq 69 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 70 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:0c:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
pci 0000:16:00.0: Signaling PME through PCIe PME interrupt
pci 0000:16:00.1: Signaling PME through PCIe PME interrupt
pci 0000:16:00.2: Signaling PME through PCIe PME interrupt
pci 0000:16:00.3: Signaling PME through PCIe PME interrupt
pci 0000:16:00.4: Signaling PME through PCIe PME interrupt
pci 0000:16:00.5: Signaling PME through PCIe PME interrupt
pci 0000:16:00.6: Signaling PME through PCIe PME interrupt
pci 0000:16:00.7: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:11.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:11.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcieport 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:02:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
efifb: probing for efifb
efifb: framebuffer at 0x90000000, mapped to 0xffffc90027900000, using 6144k, total 16384k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7ed3b038/3/0]
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0x92301000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.39-200.24.1.el6uek.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0x92300000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.39-200.24.1.el6uek.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
Refined TSC clocksource calibration: 1999.993 MHz.
Switching to clocksource tsc
usb 1-1: new high speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.2: new high speed USB device number 3 using ehci_hcd
usb 1-1.2: New USB device found, idVendor=04b4, idProduct=6560
usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.2:1.0: USB hub found
hub 1-1.2:1.0: 2 ports detected
usb 2-1.1: new high speed USB device number 3 using ehci_hcd
usb 2-1.1: New USB device found, idVendor=ffff, idProduct=0248
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1: Product: Gadget USB HUB
usb 2-1.1: Manufacturer: no manufacturer
usb 2-1.1: SerialNumber: 0123456789
hub 2-1.1:1.0: USB hub found
hub 2-1.1:1.0: 6 ports detected
usb 2-1.3: new full speed USB device number 4 using ehci_hcd
usb 2-1.3: New USB device found, idVendor=04b3, idProduct=4002
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: IBM MM2
usb 2-1.3: Manufacturer: IBM
usb 2-1.3: SerialNumber: 0000003012214
usb 1-1.2.2: new high speed USB device number 4 using ehci_hcd
usb 1-1.2.2: New USB device found, idVendor=04b4, idProduct=6560
usb 1-1.2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.2.2:1.0: USB hub found
hub 1-1.2.2:1.0: 4 ports detected
usb 2-1.1.5: new high speed USB device number 5 using ehci_hcd
usb 2-1.1.5: New USB device found, idVendor=04b3, idProduct=4010
usb 2-1.1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1.5: Product: RNDIS/Ethernet Gadget
usb 2-1.1.5: Manufacturer: IBM
usb 1-1.2.2.3: new high speed USB device number 5 using ehci_hcd
usb 1-1.2.2.3: New USB device found, idVendor=0928, idProduct=0007
usb 1-1.2.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.2.3: Product: Mass Storage Plus
usb 1-1.2.2.3: Manufacturer: OEM
usb 1-1.2.2.3: SerialNumber: R8RQ6GKC900D1Z
usb 2-1.1.5: USB disconnect, device number 5
usb 2-1.1.5: new high speed USB device number 6 using ehci_hcd
input: IBM IBM MM2 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input1
generic-usb 0003:04B3:4002.0001: input,hidraw0: USB HID v1.10 Keyboard [IBM IBM MM2] on usb-0000:00:1d.0-1.3/input0
input: IBM IBM MM2 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input2
generic-usb 0003:04B3:4002.0002: input,hidraw1: USB HID v1.10 Mouse [IBM IBM MM2] on usb-0000:00:1d.0-1.3/input1
input: OEM Mass Storage Plus as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2.3/1-1.2.2.3:1.1/input/input3
generic-usb 0003:0928:0007.0003: input,hidraw2: USB HID v1.11 Device [OEM Mass Storage Plus] on usb-0000:00:1a.0-1.2.2.3/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
zram: num_devices not specified. Using default: 1
zram: Creating 1 devices ...
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Registering the dns_resolver key type
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:03: setting system clock to 2013-09-03 14:54:17 UTC (1378220057)
Initializing network drop monitor service
Freeing unused kernel memory: 1508k freed
dracut: dracut-004-283.0.1.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
udev: starting version 147
udevd (141): /proc/141/oom_adj is deprecated, please use /proc/141/oom_score_adj instead.
usb 2-1.1.5: New USB device found, idVendor=04b3, idProduct=4010
usb 2-1.1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1.5: Product: RNDIS/Ethernet Gadget
usb 2-1.1.5: Manufacturer: IBM
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
mpt2sas version 13.100.00.00 loaded
scsi0 : Fusion MPT SAS Host
mpt2sas 0000:0c:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
mpt2sas 0000:0c:00.0: setting latency timer to 64
mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (41134540 kB)
mpt2sas 0000:0c:00.0: irq 71 for MSI/MSI-X
mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 71
mpt2sas0: iomem(0x0000000092240000), mapped(0xffffc900100d8000), size(16384)
mpt2sas0: ioport(0x0000000000002000), size(256)
mpt2sas0: Allocated physical memory: size(4219 kB)
mpt2sas0: Current Controller Queue Depth(1865), Max Controller Queue Depth(2040)
mpt2sas0: Scatter Gather Elements per IO(128)
mpt2sas0: LSISAS2004: FWVersion(10.00.08.00), ChipRevision(0x03), BiosVersion(07.18.04.02)
mpt2sas0: Protocol=(Initiator), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
mpt2sas0: sending port enable !!
Emulex LightPulse Fibre Channel SCSI driver 8.3.5.68.6p
Copyright(c) 2004-2011 Emulex. All rights reserved.
lpfc 0000:16:00.2: enabling device (0040 -> 0042)
lpfc 0000:16:00.2: PCI INT C -> GSI 36 (level, low) -> IRQ 36
lpfc 0000:16:00.2: setting latency timer to 64
lpfc 0000:16:00.2: 0:1408 Port Failed POST - portsmphr=0x80000400, perr=x1, sfi=x0, nip=x0, ipc=x0, scr1=x0, scr2=x0, hscratch=x0, pstatus=x400
lpfc 0000:16:00.2: 0:1412 Failed to set up driver resource.
lpfc 0000:16:00.2: PCI INT C disabled
lpfc 0000:16:00.3: enabling device (0040 -> 0042)
lpfc 0000:16:00.3: PCI INT D -> GSI 38 (level, low) -> IRQ 38
lpfc 0000:16:00.3: setting latency timer to 64
lpfc 0000:16:00.3: 0:1408 Port Failed POST - portsmphr=0x80000400, perr=x1, sfi=x0, nip=x0, ipc=x0, scr1=x0, scr2=x0, hscratch=x0, pstatus=x400
lpfc 0000:16:00.3: 0:1412 Failed to set up driver resource.
lpfc 0000:16:00.3: PCI INT D disabled
Initializing USB Mass Storage driver...
scsi1 : usb-storage 1-1.2.2.3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi: waiting for bus probes to complete ...
scsi 1:0:0:0: CD-ROM IBM SATA DEVICE 81Y3658 IB01 PQ: 0 ANSI: 0
mpt2sas0: host_add: handle(0x0001), sas_addr(0x500507604d0112dc), phys(4)
mpt2sas0: port enable: SUCCESS
scsi 0:1:0:0: Direct-Access LSI Logical Volume 3000 PQ: 0 ANSI: 6
scsi 0:1:0:0: RAID1: handle(0x00b5), wwid(0x098d6d2781629507), pd_count(2), type(SSP)
scsi 0:1:0:0: qdepth(128), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:0:0: Direct-Access IBM-ESXS MK1401GRRB SC27 PQ: 0 ANSI: 6
scsi 0:0:0:0: SSP: handle(0x0005), sas_addr(0x5000039428005452), phy(0), device_name(0x5000039428005451)
scsi 0:0:0:0: SSP: enclosure_logical_id(0x500507604d0112dc), slot(0)
scsi 0:0:0:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:1:0: Direct-Access IBM-ESXS MK1401GRRB SC27 PQ: 0 ANSI: 6
scsi 0:0:1:0: SSP: handle(0x0006), sas_addr(0x500003942802c216), phy(1), device_name(0x500003942802c215)
scsi 0:0:1:0: SSP: enclosure_logical_id(0x500507604d0112dc), slot(1)
scsi 0:0:1:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
sd 0:1:0:0: [sda] 285155328 512-byte logical blocks: (145 GB/135 GiB)
sd 0:1:0:0: [sda] Write Protect is off
sd 0:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 0:1:0:0: [sda] Got wrong page
sd 0:1:0:0: [sda] Assuming drive cache: write through
sd 0:1:0:0: [sda] Got wrong page
sd 0:1:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 sda3
sd 0:1:0:0: [sda] Got wrong page
sd 0:1:0:0: [sda] Assuming drive cache: write through
sd 0:1:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
dracut: Scanning devices sda3 for LVM logical volumes vg_sspaswl11g3/lv_root vg_sspaswl11g3/lv_swap
dracut: inactive '/dev/vg_sspaswl11g3/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_sspaswl11g3/lv_home' [15.00 GiB] inherit
dracut: inactive '/dev/vg_sspaswl11g3/lv_swap' [19.68 GiB] inherit
dracut: inactive '/dev/vg_sspaswl11g3/lv_oracle' [50.00 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/mapper/vg_sspaswl11g3-lv_root
dracut: Loading SELinux policy
type=1404 audit(1378220065.747:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 250819 rules.
SELinux: 2048 avtab hash slots, 250819 rules.
SELinux: 9 users, 12 roles, 3762 types, 187 bools, 1 sens, 1024 cats
SELinux: 81 classes, 250819 rules
SELinux: Permission audit_access in class file not defined in policy.
SELinux: Permission audit_access in class dir not defined in policy.
SELinux: Permission execmod in class dir not defined in policy.
SELinux: Permission audit_access in class lnk_file not defined in policy.
SELinux: Permission open in class lnk_file not defined in policy.
SELinux: Permission execmod in class lnk_file not defined in policy.
SELinux: Permission audit_access in class chr_file not defined in policy.
SELinux: Permission audit_access in class blk_file not defined in policy.
SELinux: Permission execmod in class blk_file not defined in policy.
SELinux: Permission audit_access in class sock_file not defined in policy.
SELinux: Permission execmod in class sock_file not defined in policy.
SELinux: Permission audit_access in class fifo_file not defined in policy.
SELinux: Permission execmod in class fifo_file not defined in policy.
SELinux: Permission syslog in class capability2 not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev dm-0, type ext4), uses xattr
type=1403 audit(1378220066.125:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead: starting
udev: starting version 147
WARNING! power/level is deprecated; use power/control instead
be2net 0000:16:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
be2net 0000:16:00.0: setting latency timer to 64
be2net 0000:16:00.0: POST error; stage=0x400
be2net 0000:16:00.0: PCI INT A disabled
be2net 0000:16:00.0: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.0 failed with error -1
be2net 0000:16:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
be2net 0000:16:00.1: setting latency timer to 64
be2net 0000:16:00.1: POST error; stage=0x400
be2net 0000:16:00.1: PCI INT B disabled
be2net 0000:16:00.1: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.1 failed with error -1
be2net 0000:16:00.4: PCI INT A -> GSI 34 (level, low) -> IRQ 34
be2net 0000:16:00.4: setting latency timer to 64
be2net 0000:16:00.4: POST error; stage=0x400
be2net 0000:16:00.4: PCI INT A disabled
be2net 0000:16:00.4: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.4 failed with error -1
be2net 0000:16:00.5: PCI INT B -> GSI 37 (level, low) -> IRQ 37
be2net 0000:16:00.5: setting latency timer to 64
be2net 0000:16:00.5: POST error; stage=0x400
be2net 0000:16:00.5: PCI INT B disabled
be2net 0000:16:00.5: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.5 failed with error -1
be2net 0000:16:00.6: PCI INT C -> GSI 36 (level, low) -> IRQ 36
be2net 0000:16:00.6: setting latency timer to 64
be2net 0000:16:00.6: POST error; stage=0x400
be2net 0000:16:00.6: PCI INT C disabled
be2net 0000:16:00.6: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.6 failed with error -1
be2net 0000:16:00.7: PCI INT D -> GSI 38 (level, low) -> IRQ 38
be2net 0000:16:00.7: setting latency timer to 64
be2net 0000:16:00.7: POST error; stage=0x400
be2net 0000:16:00.7: PCI INT D disabled
be2net 0000:16:00.7: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.7 failed with error -1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
i801_smbus 0000:00:1f.3: enabling device (0140 -> 0143)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
cdc_ether 2-1.1.5:1.0: usb0: register 'cdc_ether' at usb-0000:00:1d.0-1.1.5, CDC Ethernet Device, 36:40:b5:d1:00:67
usbcore: registered new interface driver cdc_ether
sd 0:1:0:0: Attached scsi generic sg0 type 0
scsi 0:0:0:0: Attached scsi generic sg1 type 0
scsi 0:0:1:0: Attached scsi generic sg2 type 0
sr 1:0:0:0: Attached scsi generic sg3 type 5
input: PC Speaker as /devices/platform/pcspkr/input/input4
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU8 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU9 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU10 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU12 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU13 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU14 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU15 sig=0x206d7, pf=0x1, revision=0x70b
microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
EXT4-fs (dm-0): re-mounted. Opts: (null)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sda2, type ext4), uses xattr
SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev dm-2, type ext4), uses xattr
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev dm-3, type ext4), uses xattr
Adding 20635644k swap on /dev/mapper/vg_sspaswl11g3-lv_swap. Priority:-1 extents:1 across:20635644k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
NET: Registered protocol family 10
iscsi: registered transport (iser)
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
iscsi: registered transport (cxgb4i)
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.10 (March 21, 2012)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.0.3 (Jun 15, 2011)
iscsi: registered transport (bnx2i)
iscsi: registered transport (be2iscsi)
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
usb0: no IPv6 routers present
802.1Q VLAN Support v1.8
bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.10 (Jan 22, 2011)
TARGET_CORE[0]: Loading Generic Kernel Storage Engine: v4.0.0-rc7-ml on Linux/x86_64 on 2.6.39-200.24.1.el6uek.x86_64
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
TARGET_CORE[0]: Initialized ConfigFS Fabric Infrastructure: v4.0.0-rc7-ml on Linux/x86_64 on 2.6.39-200.24.1.el6uek.x86_64
TCM: Registered subsystem plugin: rd_dr struct module: (null)
TCM: Registered subsystem plugin: rd_mcp struct module: (null)
CORE_HBA[0] - TCM Ramdisk HBA Driver v4.0 on Generic Target Core Stack v4.0.0-rc7-ml
CORE_HBA[0] - Attached Ramdisk HBA: 0 to Generic Target Core TCQ Depth: 256 MaxSectors: 1024
CORE_HBA[0] - Attached HBA to Generic Target Core
RAMDISK: Referencing Page Count: 8
CORE_RD[0] - Built Ramdisk Device ID: 0 space of 8 pages in 1 tables
rd_dr: Using SPC_PASSTHROUGH, no reservation emulation
rd_dr: Using SPC_ALUA_PASSTHROUGH, no ALUA emulation
Vendor: LIO-ORG Model: RAMDISK-DR Revision: 4.0
Type: Direct-Access ANSI SCSI revision: 05
CORE_RD[0] - Added TCM DIRECT Ramdisk Device ID: 0 of 8 pages in 1 tables, 32768 total bytes
TCM: Registered subsystem plugin: pscsi struct module: ffffffffa056ece0
TCM: Registered subsystem plugin: fileio struct module: ffffffffa0575700
TCM: Registered subsystem plugin: iblock struct module: ffffffffa057a740
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
fuse init (API version 7.16)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
usb 1-1.2.2.1: new high speed USB device number 6 using ehci_hcd
usb 1-1.2.2.1: New USB device found, idVendor=058f, idProduct=6387
usb 1-1.2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.2.1: Product: Mass Storage
usb 1-1.2.2.1: Manufacturer: Generic
usb 1-1.2.2.1: SerialNumber: 68204C70
scsi2 : usb-storage 1-1.2.2.1:1.0
scsi 2:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2
sd 2:0:0:0: Attached scsi generic sg4 type 0
sd 2:0:0:0: [sdb] 2052096 512-byte logical blocks: (1.05 GB/1002 MiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
udev: starting version 147
udev: starting version 147
udev: starting version 147
udev: starting version 147
usb0: no IPv6 routers present
usb 1-1.2.2.1: USB disconnect, device number 6
usb 1-1.2.2.1: new high speed USB device number 7 using ehci_hcd
usb 1-1.2.2.1: New USB device found, idVendor=058f, idProduct=6387
usb 1-1.2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.2.1: Product: Mass Storage
usb 1-1.2.2.1: Manufacturer: Generic
usb 1-1.2.2.1: SerialNumber: 68204C70
scsi3 : usb-storage 1-1.2.2.1:1.0
scsi 3:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2
sd 3:0:0:0: Attached scsi generic sg4 type 0
sd 3:0:0:0: [sdb] 2052096 512-byte logical blocks: (1.05 GB/1002 MiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] Attached SCSI removable disk
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
usb 1-1.2.2.1: USB disconnect, device number 7
usb 1-1.2.2.1: new high speed USB device number 8 using ehci_hcd
usb 1-1.2.2.1: New USB device found, idVendor=1e3d, idProduct=2093
usb 1-1.2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.2.1: Product: Flash Disk
usb 1-1.2.2.1: Manufacturer: USB 2.0
usb 1-1.2.2.1: SerialNumber: 0719440042B25701
scsi4 : usb-storage 1-1.2.2.1:1.0
scsi 4:0:0:0: Direct-Access USB 2.0 Flash Disk 5.00 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sdb] 2052096 512-byte logical blocks: (1.05 GB/1002 MiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
[root@sspaswl11g3 Desktop]#
Similar Messages
-
I had my photo stream on and my icloud all set up, i just had the screen replaced and they somehow lost all the photos off my phone, but why wont the photo's reload back on to my iphone now that im connected to wifi again, where are all my photos???
When photos are added to the photo stream album on a device (either due to a new photo having been taken or having been synced from another device using the stream) they remain in the album. However, the syncing process involves copying the photos to the photo stream server where they are kept for a maximum of 30 days, up to 1000 photos. If a device is reset or the stream is turned off or turned back on again (or in your case, the device was repaired), the photos that were on the device's photo stream album are gone and the only ones to appear are those that are currently on the servers (recall the 30 day limit).
If some of your photos are older than 30 days, then they are no longer stored on the cloud and hence are not synced down to the iphone.
Recall, photo stream is just a syncing service, it is not designed as a storage service for photos. Always sync photos to a computer for archiving. -
The hard disc of my laptop has crashed and i lost all the data. Now I want to take back up of my I phone and transfer contacts , messages and music etc back into my laptop , how can I do that. Also let me know how I can transfer the contacts into Windows contacts from I phone. Pl help
Your content will only be where you put it. It has always been very basic to always maintain a backup copy of your computer.
You can transfer itunes purchases from your iphone: File>Device>Transfer purchases.
You can import your pics taken with the iphone as you would with any digital camera.
You can e-mail the other pics to yourself, they will never be of the original quality.
You can out a unique contact and calendar entry on the computer. You should get the option to merge the data when you sync. -
I downloaded the iOS7, lost all the custom ring tones that I had on my phone. the iTunes sync page says that they have all been selected but they don't show up in my phone? Help?
I had the same problem and was able to fix it. Go to your iTunes and click on the Tones folder on the left under library. Some of my ring tones had an exclamation mark next to it and those were the ones that did not sync. You have to click on those and find it in your computer. Once the exclamation mark is gone, go to Tones section of your device in iTunes, make sure you select the tones you want synced, and click apply. I hope that helps you!
-
I dowloaded ios5 for my iphone4, and when i finished the backup i lost all the music and all the videos i bought from the iTunes store. How can i get it back?
Backup do not contaiuns music or apps, you will either need to resync them from your itunes computer, or you can go to purchase history in itunes or app store app and go to purchase history and redownload them.
-
i have update and restore my wife iphone to 7.0.4 and i lost all the data what to do now? all contacts and kids photos goooone , we have the same apple ID and when i tried to restore from i cloude , i restored my contacts not her???!!!!!
Looks like you restored your backup file to her phone. If you didn't back up your wife's phone first, then the data is gone, sorry.
-
I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?
Hi
Thanks but I have tried doing the above - when I said 7 times I was modest, its more like 15 times.
And I am referring to the 5.1 software update. I dont have wifi so I guess I will have to try that seeing that my husband also has the same problem - he has also tried downloading several times. It always times out en says that the connection is lost but yet there are always an internet connection and a decent signal once it stopped. Think it said error 32052 or something!
I am disappointed because the update includes inprovement on the battery life - did you guys notice any difference? -
i just came back from a family vacation and tried to sync my phone to my laptop. It didnt recognize my phone, and did i want to add device or restore to old device. i chose to restore and in doing so, i lost all the photos taken on our vacation. is there a way to retrieve photos? the completely disappeared from my iphone altogether. I am using iphone 5. I did not have any backup since I was about to download the photo. Please help me. Thank you
See:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
HT1766 Lost all the data of my Iphone
I Lost all the data of my Iphone when I try to back up on new applications.
Connect phone to computer.
Select Restore.
Tell iTunes which of the available backup files to use, let iTunes restore it.
Also, try reading the User's Guide as it answers questions like this. -
I updated my 3g iphone to the ISO 5.0 & now i lost all the music that I had downloaded from CD's, but all the music i purchased is still there. How can I get my CD music back on my phone?
for purchases from the iTunes store do this:
connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
for everything else check out this post by Zevoneer. -
My husband bought an iPad 2. I have a Mac. ITunes is in my name but I have turned sharing on. When we updated to OS5 we lost all the free apps that he downloaded in his user name. Is there no way to update using my iTunes without losing his software. He is frustrated using the iPad because he never knows whether to use his user name or my user name.
Apps are only tied to one account... You can set up two iTunes accounts on your computer, however, and let his iPad sync to his account. If he has never backed up his apps to a computer, however, he will have to redownload all the apps. Afterwards, he can backup to iCloud instead of your computer.
http://support.apple.com/kb/ht1495 -
Help, I lost all the songs on my iPod when I deleted a few songs from my iTunes Library, checked the box titled "Replace all items when Autofilling" in my Autofill Settings window, and then tried to Autofill. Note that I do not purchase songs from iTunes, but rather I rip songs off my own cd's and then transfer the mp3 files to iTunes. And after I transfer mp3 files from my pc to iTunes and then Autofill, I generally delete those files from my pc.
I can still see the songs in my iTunes Library, but not on my iPod. Is there a way that I can salvage them and get them back on my iPod?
Thanks in advance.Well you will have to wait to connect you ipod to the orignal computer and it will put all your songs back on to it.
-
I have Outlook on my PC and thought it would be smart to have my contact in the Clouds where my ipad, work pc, home pc would be updated etc. So I was asked I though to copy my contacts from Outlook to iCloud. Instead it moved them and in doing so lost all the settings like Categories and reset how they are listed (used first name because have a lot of drs, phds, msws etc) now listed with last name and so I have a lot of people with md as last name. This is an organization list and is about 2000 contacts so having to go back and fix it will be a nightmare and unnecessary work.
Is there any way I can fix this easily instead of correcting each contact one at a time?
Thanks.Restore your backup.
-
I Just synced my iPhone and lost all the info in notes I had on the phone. How do you have the info sync from phone to desktop and not the other way around as I usually make contact changes etc on my phone. I would then like to be able to sync that info from desktop to ipad thanks
It does make sense. The iPhone is a one-person device and just syncs to one computer.
The way it should work is as follows:
Old computer content ---> New computer
New computer <---> syncs to iPhone
But the way you are trying to operate sounds like:
Old computer content ---> iPhone
... and ...
New computer content <---> iPhone
So simply move your old stuff (either directly from iTunes, or from a computer backup) to the new computer, have it all there, then sync your iPhone to the new machine. -
I have an iphone 4.I upgraded it to 5.0.1 and so I have lost all the data from my iPhone,but i have a backup in my computer.How do I use the backup file ? i.e How will i get that backup file in my iPhone ?
Connect phone to computer.
Select Restore.
Tell iTunes which of the available backup files to use, let iTunes restore it.
Also, try reading the User's Guide as it answers questions like this.
Maybe you are looking for
-
MPPE required but not available
Hi, Seems like this issue is recurring on the discussion board. I am running pptp-vpn on an osx server 10.5.7, which is also an OD master. EDIT: Should add that I was using my OD accounts to VPN, not local accounts. Until yesterday, the pptp-vpn work
-
dear firends, while configuration obyu when mantain symbolic a/c to G/L getting following error. Special G/L indicator not defined or incorrect Message no. F5838 Diagnosis Posting key "29" (account type "K") has been programmed for special
-
Eraser + Auto-Blend layers = problem
Hello, I've been using "Auto-Blend layers" to edit faces in Photoshop. For example: putting Brad Pitt's face on Tom Cruise's face or something like that... However, I seem to have the exact same problem each time. I use the following method: Two laye
-
I connected my Mac Mini via Ethernet in order to download Mavericks. I chose a nighttime download. My Mac runs Mountain Lion. After eleven hours it has pausd on 900 MB, and states that there is an error. This is my third attempt and it always ends th
-
I am trying to sync contacts from my iPhone to Mac. When I plug in my iPhone, I do not get the Info tab in iTunes (as mentioned in how to sync on this website). How can I get the info tab to appear?