My ibook crashed and had to give it a hard shutdown and now all i get is a

blank white screen, no os system will load, the capslock key wont light up and i tried to put in the leopard disk but i get nothing.
any ideas?
Message was edited by: Rubotron

Hello,
You are trying to install Leopard? ARe you sure your iBook meets Leopard minimum requirements?
Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
512MB of memory
DVD drive for installation
9GB of available disk space
Your profile indicates you are running 10.2. Is this correct? If so, you need to use your restore disk and check the boot disk for errors.
Restart your Mac while holding down the C key, pressing the power button and inserting your restore disk all at the same time. An Installer window will open, but do not proceed with any installations. Instead, from the Menu Bar, select Utilities > Disk Utility. In the Disk Utility window click First Aid, and then click Verify. If Disk Utility reports errors, click Repair. When Disk Utility is finished, from the Menu Bar, select Utilities/Startup Disk. Select MacintoshHD 10.x.x and click Restart.
Also, if your iBook meets the minimum requirements for Leopard, you need to make sure you have sufficient disk space to install it.
Right or control click the MacintoshHD icon on your Desktop, then click: Get Info. In the Get Info window, click the discovery triangle so it's facing down. You will see; Capacity and Available Make sure you have 10% available disk space, 15% is better. Insufficient available space, can cause performance issues, system corruption, and possible loss of data.
Carolyn

Similar Messages

  • My ipod was doing the latest update of ios and it froze so i tried to reset it now all i get is a light blue screen. help please.

    my ipod was doing the latest update of ios (think it was 6) and it froze so i tried to reset it now all i get is a light blue screen. help please.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • I have two wireless networks that I switch back and forth.  Everytime I switch the network zone my macbook pro hangs and I have to do a hard shutdown and restart.  What is the fix?

    I have two wireless networks that I switch back and forth.  Everytime I switch the network zone my macbook pro hangs and I have to do a hard shutdown and restart.  What is the fix?

    Create two locations in Network, one for one and one for the other.
    WiFi, Internet problems, possible solutions
    WiFi security issues, at home and WiFi hotspots

  • HT4623 HI I TRIED TO ERASE MY IPOD TO GIVE IT TO MY GRANDSON. NOW ALL I GET IS MY CORD SHOW TO A MUCIS LETTER. WHAT DO I DO?

    Hi I tired to erase my ipod to give to my grandson. Now all I get is a cord going into a music bar Why? Is it any good anymore?

    Hi can this Ipod be fix

  • I need help, I have CS4 and had to reinstall from a hard copy. Now my camera RAW don't work.

    I had a 50d and just bought a 7d. my photoshop cs4 was acting up so i unitstalled it. I reinstalled it from my hard copy (cd) and now i can not get it to open ps RAW....

    Run Help - Updates.
    If that for some reason fails, you can visit one of these pages to get updates and install them manually.  You'll want the Camera Raw 5.7 update.
    http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows
    http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Macintosh
    -Noel

  • Had itunes then one day it quit working, now all i get when i open is this:itunes has quit working box

    My son received a laptop for christmas last december..Itunes has worked on it up until about a month ago. Now the program states this: Itunes has quit working- we have uninstalled and reinstalled earlier verions as well as the new version. they all go through the process but when it finalizes and we open it says the same thing. under the details of the error we get all this stuff:
    Problem signature:
    problem Event Name:
    APPCRASH
    Application Name:itunes.exe
    Application Version: 10.6.3.25
    It goes on forever with a list of code. We have even tried to the the winsock reset and nothing. Does anyone have any suggestions as to what we need to do? We have done everything the apple support site has stated but nothing seems to work. I hate to think we has lost all his purchased music etc over this. HELP!

    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Please report back soon.

  • My iMac 8.1 was slowing down and had permissions problems. I backed everything up, and then re-installed. Now all I get is a black screen. Power+D gives me a hardware error message: HDD-1336. Help!

    My iMac 8.1 (10.6.8 ) was slowing down and had recurrent permissions problems, mostly with Java. I backed everything up, and then re-installed from time machine. Now all I get is a black screen which says I need to reboot. Power+D gives me a hardware error message: 4 MOT/1/40000003: HDD-1336 or HDD-1327. When I reboot from the OSX CD and start disc utilities everything checks out OK. When I reload 10.5.2 from the OSX CD everything seems to work OK and no more permissions problems. But then I loose all my email and safari stuff. Anyone have any ideas short of going back to my old PC?

    DonM. wrote:
    Hi
    Thanks for the help. No point in fooling around with it any more. Will I be able to use it as a monitor if I get a mimi mac?
    Cheers. Don
    No unfortunatley it's too old, you are referring to Target Display Mode which became avialble in 2009, your 2008 needs to have the HD replaced. I'd still do that if everything else is OK or you can simply buy a new MM and display or even a new iMac  or an Apple refurbished iMac to save money.

  • I had Itunes installed on 2nd hard drive and it crashed

    I had ITunes installed on 2nd hard drive and it crashed. I tried to install a new copy of ITunes and it keeps looking for the ITunes that was on the one that crashed. How do I keep ITunes install package from looking for the old install.

    No reason to. I always a cloned copy of my operating systems so I can reclone it back in case the the one I use dies.

  • I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

    I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

    You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • I had a windows laptop, and I save files like photos, documents, videos and other things on an external hard drive, and now I want to move those files to the Mac book Pro, and then move those files again to another external hard drive 1T. My question is:

    I had a windows laptop, and I save files like photos,documents, videos and other things on an external hard drive, and now I want tomove those files to the Mac book Pro, and then move those files again toanother external hard drive 1T. My question is: Is it possible? Doing this willnot affect the files that I had in windows? No information is lost? or how cani do it?

    Connect the external drive to your Mac and drag the files from it to your Mac's internal drive. Then dismount and disconnect the external drive, connect the 1TB external drive, and drag the files from the internal drive onto the external. Nothing will have been deleted from any of the drives up to this point; the files will only have been copied. Verify that the files are readable. There's no reason they shouldn't be; this is just a precaution.
    Now if you wish to delete the files from any of the drives, drag them to the Trash, and Empty the Trash while the drive from which they came is still connected. If you disconnect the drive before emptying the Trash, the files you were trying to remove from it won't be deleted. They'll remain in the Trash and continue to take up space on the drive.
    Note that if your external drives are in NTFS format, you won't be able to write anything to them or delete anything from them, though you will be able to read and copy the files they contain. The NTFS disk format is read-only to the Mac OS, unless you have a third-party NTFS driver installed. To make your drives cross-platform readable and writable, you must reformat them in the FAT32 or ExFAT format.

  • I recently had my computer redone and had to redownload itunes on my computer and when I synced my ipod none of my music went into my library.  How do I get my music that is on my ipod into my library on itunes?

    I recently had my computer redone and had to redownload itunes on my computer and when I synced my ipod none of my music went into my library.  How do I get my music that is on my ipod into my library on itunes?

    The music sync is one way - computer to iphone .  The exception is itunes purchases.
    It has always been very basic to always maintain a backup copy of your computer files/docs/pics/music/etc.
    Use your backup copy to put everything back.
    If for some reason you have failed to maintain a backup copy ( not good), then you can transfer itunes purchases from your ipod:  File>Transfer Purchases

  • I broke my ipod 5 generation ipod and had some pretty important notes on there and it will not start again. I also have an ipod 4th generation and I was wondering if you could use icloud or something to restore my notes on to this ipod. Any ideas?

    I broke my ipod 5 generation ipod and had some pretty important notes on there and it will not start again. I also have an ipod 4th generation and I was wondering if you could use icloud or something to restore my notes on to this ipod. Any ideas?

    If you had been syncing notes on your iPod with iCloud before this happened, go to icloud.com and confirm that your notes are still there.  If they are, you could either email them to yourself one at a time from icloud.com or you could sign into your icloud account on your other iPad in Settings>iCloud and turn Notes to On to sync them to your other iPod.

  • HT4061 I brought a Iphone 4s from someone and they never give me their apple id and password. Now I the phone but its lock , how do I unlock it ?

    I brought a Iphone 4s from someone and they never give me their apple id and password. Now I the phone but its lock , how do I unlock it ?

    You don't. Take it back to them and ask them to unlock it. If they refuse, or if they have now vanished off the face of the earth, you own a brick. There is no way past the activation lock without the proper credentials.

  • I have bought an iphone 3gs on ebay it worked with my sim but had last users pics numbers ect, so i restored it butb its failed and now all i get is connect to i tunes but will not restore ????

    i have bought an iphone 3gs on ebay it worked with my sim but had last users pics numbers ect, so i restored it butb its failed and now all i get is connect to i tunes but will not restore ????

    Have latest version of iTunes installed and running. Also make sure you have internet access working and can access Apple websites. Also, make sure you don't have any entries in your hosts file referring to gs.apple.com....If your not sure about how to do that, go ahead and do the rest first. You can come back to that later.....Plug in phone. Put phone in DFU mode.(google put iphone in DFU mode for instructions) Then restore the phone in iTunes by highliting your device in the left column and click on the Restore button. The latest iOS version is 4.3.3. That's what iTunes will restore it to. When it's done restoring, iTunes will ask if you want to restore from a backup or setup as a new phone. I would use the Setup as a New Phone option. Once it's done, you should have a clean install of the iOS and an operating phone, as long as there are no hardware issues with it.

  • HT201328 I have recieved a locked phone from US. At& T confirmed tht the same could be unlocked and had suggested the procedure of 'back up and restotre to unlock the phone, which was done. After this when I removed the old  simcard, the iphone cannot be

    I have recieved a locked phone from US. At& T confirmed tht the same could be unlocked and had suggested the procedure of 'back up and restotre to unlock the phone, which was done. After this when I removed the old  simcard, the iphone cannot be activated

    When you connected to iTunes and restored, did you get the
    'Congratulations. Your iPhone is now unlocked' message?
    If not, first try again. Follow the procedure in the email
    AT&T sent you exactly - do not skip steps. If still no success,
    contact AT&T as the problem is on their end.
    Do you have a sim in the iPhone when trying to activate it?
    You must put a sim into the iPhone for activation to compllete.

Maybe you are looking for

  • XML - Oracle Aproach

    Hi, i've recently try to user the XML Component in Oracle Portal. I've done a few examples and i have a couple of questions. Can i create a portlet with XML & XSL. Where can i find documentation about XSL commands that Oracle Portal understands? Take

  • How can I access my iPhone icloud without my phone?

    I have lost my iPhone. How can I access my iPhone personal information ( telephone contacts) with my icloud account?

  • Need sample prog for ALV reporting

    Hi All, I need some sample ALV programs, Please mail docs  to below avinavpratapsinghDOTseATmail.com Thanks n Rgds, Kali

  • Tra le opzioni non c'è l'Italiano

    Come posso cambiare la lingua su adobe Photoshop elements 12 Editor se la lingua Italiana non è neppure menzionata tra le opzioni?... Potete aiutarmi ? Grazie

  • Cost Centers & Org Unit

    Hi Gurus can anybody tell me  how to get Employees Const centers and Org Units Thanks & Regards