My ibook g4 to fail to load sometimes
sometimes my laptop works just fine but, sometimes it will not load the mouse or show the battery and wi-fi. sometimes it load completely then tell me to reboot. other times it comes up to a boot screen saying type mac-boot which does nothing. then there are times it never even powers on. what could cause all of these symptoms?
sometimes it load completely then tell me to reboot.
That sounds like a kernel panic.
Do you see this?
Similar Messages
-
When I click on a book in I books is says, "failed to load book because the requested resource is missing." What should I do?
Re download the book from the cloud.
-
On iBooks app on iPad: When trying to open a previously purchased and read book, I get the message "Failed to load book because the requested resource is missing." How can I open the book again? Larry107
Quit the iBooks app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logou appears and let go of the button.
Or try deleting the book and download it again. You can download it again for free as long as you use the same Apple ID.
If that doesn't work either, sometimes deleting the iBooks app and reinstalling it may work. But art with the first two suggestions. -
I cannot open open purchased books fro ibooks, a window pops up saying "failed to load book because the requested resource is missing" not sure what has happened, extremely frustrating.....does it have something to o with icloud?
Quit the iBooks app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logou appears and let go of the button.
Or try deleting the book and download it again. You can download it again for free as long as you use the same Apple ID.
If that doesn't work either, sometimes deleting the iBooks app and reinstalling it may work. But art with the first two suggestions. -
I just purchased a book on app store and can't seem to read it in iBooks, and keeps on coming up with "Failed to load book because the requested resource is missing" what do I do?
Quit the iBooks app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logou appears and let go of the button.
Or try deleting the book and download it again. You can download it again for free as long as you use the same Apple ID.
If that doesn't work either, sometimes deleting the iBooks app and reinstalling it may work. But art with the first two suggestions. -
HT4059 iBooks fails to load PDFs
Why does iBooks fail to load some PDFs from safari? Sometimes it eventually load a file it failed to open up to four times for no obvious reasons.
Try re-downloading it. First delete it, then download it again. iTunes will prompt you, you have already purchased this item, do you want to download it again?
-
My iBooks will not open, I receive a message that states: "Failed to load book because the requested resource is missing." How can this be repaired/resolved?
If you can't open a particular ibook then try deleting it from the bookshelf via the Edit button at the top right of the bookshelf, and (assuming that it's still in your country's store) redownload it via the Purchased tab in the ibookstore in the app (or if you have a copy of it on your computer's iTunes library sync it back from there).
-
HT1904 My iBooks say failed to load book because requested resource is missing? ?
I purchased three books that won't let me have access. Give me an error message that says "failed to load book because requested resource is missing. How do I resolve this problem?
Hello Akiva 1959,
It sounds like you have made some purchases in iBooks, and when you try to download them you get this error message that the resource cannot be found. I would report this issue to our iTunes Store support directly with this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
To report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase, follow these steps:
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
Thank you for using Apple Support Communities.
All the best,
Sterling -
All the purchased books in my iBooks app have stopped opening. The message, FAILED TO LOAD BOOK BECAUSE THE REQUESTED RESOURCE IS MISSING, comes up!!
I have deleted the book, and redownloded it, and have even deleted the entire app and redownloaded it as well!!
Does anyone have an helpful suggestions??I am having the same issue in my iPad Mini with iOS 7. I have deleted the same books and redownloaded them several times and still have the same problem.
-
IBook "Fail to load book" HELP!
My iPhone 4S iBook app will not allow me to open any of my purchased books recently. It gives the error "Failed to load book because requested resource is missing." I noticed other users having that issue with their IPad and tried some of the solutions listed. I tried Deleting the app, deleting books (I can't get back now) signing out and resigning in, restarting my device, buying a new book and trying that, etc. Nothing has worked. I even switched to "Purchased books" both in the store (won't load) and in my library (blank). What do I do? I have soo many books on this device. Side note: This iPhone is my only Apple device, and I do not connect it to a computer or anything.
I have the same issue. I tried deleting and redownloading. That didn't work. I had to restart my iPad as well.
delete book from iBook library
close all apps
restart iPad
redownload -
Receive this message when I try and open a book " failed to load book because the requested resource is missing" I have deleted the book and deleted Ibooks and still keep getting this message. Any ideas on what I should do.
I have tried deleting and redownloading a few times and still won't work. At one point, I had two icons for the same book, both acting in the same manner. This is just one of many issues I am having with iPad mini. Do you have another suggestion for fixing this?
-
Hi, can't open purchased books in ibooks. Message reads 'failed to load book because the requested resource is missing'
Re download the book from the cloud.
-
Sometimes fails to load the right codec (or chipset) for audio
Sometimes fails to load the right sound codec (or chipset) for at boot, I think that it's same issue with alsa and OSS.
At boot time (toshiba u300) alsa (or kernel maybe) fails to load sound.
When it works this is loaded:
kike ~ $ log -b | grep "snd_"
jul 02 22:46:10 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
kike ~ $ amixer info
Card default 'Intel'/'HDA Intel at 0xf0800000 irq 48'
Mixer name : 'Realtek ALC268'
Components : 'HDA:10ec0268,10ec0268,00100003 HDA:11c11040,11790001,00100200'
Controls : 34
Simple ctrls : 14
kike ~ $ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf0800000 irq 45
kike ~ $ cat /proc/asound/card0/codec#* | grep Codec
Codec: Realtek ALC268
Codec: LSI ID 1040
kike ~ $ modinfo soundcore
filename: /lib/modules/3.9.7-1-ARCH/kernel/sound/soundcore.ko.gz
alias: char-major-14-*
license: GPL
author: Alan Cox
description: Core sound module
depends:
intree: Y
vermagic: 3.9.7-1-ARCH SMP preempt mod_unload modversions 686
parm: preclaim_oss:int
kike ~ $ alsactl init
Found hardware: "HDA-Intel" "Realtek ALC268" "HDA:10ec0268,1179ff50,00100003 HDA:11c11040,11790001,00100200" "0x1179" "0xff50"
Hardware is initialized using a generic method
kike ~ $ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
kike ~ $ lsmod | grep snd
snd_hda_codec_realtek 26353 1
snd_hda_intel 30415 0
snd_hda_codec 125545 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4746 1 snd_hda_codec
snd_pcm 62851 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 6038 2 snd_pcm,snd_hda_intel
snd_timer 14846 1 snd_pcm
snd 44486 6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 4386 1 snd
kike ~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
kike ~ $ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 jul 8 14:45 by-path
crw-rw----+ 1 root audio 116, 6 jul 8 14:45 controlC0
crw-rw----+ 1 root audio 116, 5 jul 8 14:45 hwC0D0
crw-rw----+ 1 root audio 116, 4 jul 8 14:45 hwC0D1
crw-rw----+ 1 root audio 116, 3 jul 8 14:45 pcmC0D0c
crw-rw----+ 1 root audio 116, 2 jul 8 14:45 pcmC0D0p
crw-rw---- 1 root audio 116, 1 jul 8 14:45 seq
crw-rw----+ 1 root audio 116, 33 jul 8 14:45 timer
kike ~ $ speaker-test -Dplug:front -c2
speaker-test 1.0.27.1
Playback device is plug:front
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 1048576
Period size range from 32 to 524288
Using max buffer size 1048576
Periods = 4
was set period_size = 262144
was set buffer_size = 1048576
0 - Front Left
1 - Front Right
Time per period = 10,949396
0 - Front Left
1 - Front Right
Time per period = 10,959696
When sound doesn't works, only the codec «LSI ID 1040» is loaded, nor «Realtek ALC268» nor both:
kike ~ $ log -b | grep "snd_"
nov 21 07:47:20 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
kike ~ $ amixer info
Card default 'Intel'/'HDA Intel at 0xf0800000 irq 45'
Mixer name : 'LSI ID 1040'
Components : 'HDA:11c11040,11790001,00100200'
Controls : 0
Simple ctrls : 0
kike ~ $ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf0800000 irq 45
kike ~ $ cat /proc/asound/card0/codec#* | grep Codec
Codec: LSI ID 1040
kike ~ $ modinfo soundcore
filename: /lib/modules/3.11.6-1-ARCH/kernel/sound/soundcore.ko.gz
alias: char-major-14-*
license: GPL
author: Alan Cox
description: Core sound module
depends:
intree: Y
vermagic: 3.11.6-1-ARCH SMP preempt mod_unload modversions 686
parm: preclaim_oss:int
kike ~ $ alsactl init
Found hardware: "HDA-Intel" "LSI ID 1040" "HDA:11c11040,11790001,00100200" "0x1179" "0xff50"
Hardware is initialized using a generic method
kike ~ $ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
kike ~ $ lsmod | grep snd
snd_hda_intel 30903 0
snd_hda_codec 127562 1 snd_hda_intel
snd_hwdep 4746 1 snd_hda_codec
snd_pcm 63876 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 5942 2 snd_pcm,snd_hda_intel
snd_timer 14942 1 snd_pcm
snd 44566 5 snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 4386 1 snd
kike ~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
kike ~ $ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 nov 21 07:47 by-path
crw-rw----+ 1 root audio 116, 3 nov 21 07:47 controlC0
crw-rw----+ 1 root audio 116, 2 nov 21 07:47 hwC0D1
crw-rw---- 1 root audio 116, 1 nov 21 07:47 seq
crw-rw----+ 1 root audio 116, 33 nov 21 07:47 timer
kike ~ $ speaker-test
speaker-test 1.0.27.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
Playback open error: -2,No existe el fichero o el directorio
kike ~ $
I've followed this topics without luck.
https://wiki.archlinux.org/index.php/Al … sound_card
https://mailman.archlinux.org/pipermail … 05092.html
https://www.kernel.org/doc/Documentatio … Models.txt
First I worked around alsa sound state, it doesn't work, then I tried to point my laptop model in «/etc/modprobe.d/alsa-base.conf» file:
options snd-hda-intel model=toshiba
options snd-hda-intel index=0
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
options snd-pcsp index=-2
options snd-usb-audio index=-2
And last I've tried to load Realtek modules in «/etc/modules-load.d/alsa.conf» file:
snd
snd_hda_intel
snd_hda_codec
snd_pcm
snd_page_alloc
snd_timer
snd_hwdep
snd_hda_codec_realtek
And here is that commands shows this sesion:
kike ~ $ log -b | grep "snd_"
dic 22 08:23:20 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
dic 22 08:23:21 dokan-laptop systemd-modules-load[146]: Inserted module 'snd_hda_intel'
dic 22 08:23:21 dokan-laptop systemd-modules-load[146]: Inserted module 'snd_hda_codec_realtek'
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:34 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:35 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:35 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:35 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:35 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:35 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:35 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:01 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:01 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:01 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:01 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:01 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:02 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:02 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
kike ~ $ amixer info
Card default 'Intel'/'HDA Intel at 0xf0800000 irq 45'
Mixer name : 'LSI ID 1040'
Components : 'HDA:11c11040,11790001,00100200'
Controls : 0
Simple ctrls : 0
kike ~ $ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf0800000 irq 45
kike ~ $ cat /proc/asound/card0/codec#* | grep Codec
Codec: LSI ID 1040
kike ~ $ modinfo soundcore
filename: /lib/modules/3.12.5-1-ARCH/kernel/sound/soundcore.ko.gz
alias: char-major-14-*
license: GPL
author: Alan Cox
description: Core sound module
depends:
intree: Y
vermagic: 3.12.5-1-ARCH SMP preempt mod_unload modversions 686
parm: preclaim_oss:int
kike ~ $ alsactl init
Found hardware: "HDA-Intel" "LSI ID 1040" "HDA:11c11040,11790001,00100200" "0x1179" "0xff50"
Hardware is initialized using a generic method
kike ~ $ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
kike ~ $ lsmod | grep snd
snd_hda_codec_realtek 35534 0
snd_hda_intel 31255 0
snd_hda_codec 128858 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4750 1 snd_hda_codec
snd_pcm 63880 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 5978 2 snd_pcm,snd_hda_intel
snd_timer 14946 1 snd_pcm
snd 44566 6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 4386 1 snd
kike ~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
kike ~ $ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 dic 22 08:23 by-path
crw-rw----+ 1 root audio 116, 3 dic 22 08:23 controlC0
crw-rw----+ 1 root audio 116, 2 dic 22 08:23 hwC0D1
crw-rw---- 1 root audio 116, 1 dic 22 08:23 seq
crw-rw----+ 1 root audio 116, 33 dic 22 08:23 timer
kike ~ $ speaker-test -Dplug:front -c2
speaker-test 1.0.27.2
Playback device is plug:front
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Playback open error: -2,No existe el fichero o el directorio
My next step is go into kernel but I think it's better to ask here first.
I have to say that before Arch it had installed Ubuntu 10.04 with OSS (problems with keyboard sound keys with alsa), lately before change to Arch I must to restart sound system before it works frequently with this procedure; «soundoff», then «soundon» absolutly freezes the laptop so I had to turn off it and turn on again, then «rm /usr/lib/oss/starting», and last «soundon», then it sometimes works.
Now my only way to have sound is to restart the system time and time again until it works.
Thanks for your advices.
Last edited by Dokan (2013-12-22 11:49:08)Maybe two kernel modules that try to control the same piece of hardware, but how can I know what modules are?
Blacklisting [https://wiki.archlinux.org/index.php/Ke … acklisting]
Blacklisting, in the context of kernel modules, is a mechanism to prevent the kernel module from loading. This could be useful if, for example, the associated hardware is not needed, or if loading that module causes problems: for instance there may be two kernel modules that try to control the same piece of hardware, and loading them together would result in a conflict.
Some modules are loaded as part of the initramfs. mkinitcpio -M will print out all autodetected modules: to prevent the initramfs from loading some of those modules, blacklist them in /etc/modprobe.d/modprobe.conf. Running mkinitcpio -v will list all modules pulled in by the various hooks (e.g. filesystem hook, SCSI hook, etc.). Remember to add that .conf file to the FILES section in /etc/mkinitcpio.conf (if you have not done so already) and rebuild the initramfs once you have blacklisted the modules, and to reboot afterwards.
# mkinitcpio -M
==> Modules autodetected
ac
acpi_cpufreq
ahci
ata_generic
ata_piix
battery
btusb
button
coretemp
ehci_pci
evdev
ext4
firewire_ohci
hid_generic
i2c_i801
i915
intel_agp
iTCO_wdt
iwl4965
joydev
kvm_intel
lpc_ich
microcode
pata_acpi
pcspkr
processor
psmouse
r592
r8169
sdhci_pci
sd_mod
serio_raw
shpchp
snd_hda_intel
sr_mod
thermal
toshiba_acpi
toshiba_bluetooth
uhci_hcd
usbcore
usbhid
uvcvideo
video
wmi
[root@dokan-laptop ~]# mkinitcpio -v
==> Starting dry run: 3.12.5-1-ARCH
-> Running build hook: [/usr/lib/initcpio/install/base]
adding file: /bin/busybox
adding symlink: /usr/lib/libc.so.6 -> libc-2.18.so
adding file: /usr/lib/libc-2.18.so
adding symlink: /lib/ld-linux.so.2 -> ld-2.18.so
adding file: /usr/lib/ld-2.18.so
adding symlink: /usr/bin/[ -> busybox
adding symlink: /usr/bin/[[ -> busybox
adding symlink: /usr/bin/ash -> busybox
adding symlink: /usr/bin/awk -> busybox
adding symlink: /usr/bin/basename -> busybox
adding symlink: /usr/bin/cat -> busybox
adding symlink: /usr/bin/chgrp -> busybox
adding symlink: /usr/bin/chmod -> busybox
adding symlink: /usr/bin/chown -> busybox
adding symlink: /usr/bin/chroot -> busybox
adding symlink: /usr/bin/clear -> busybox
adding symlink: /usr/bin/cp -> busybox
adding symlink: /usr/bin/cttyhack -> busybox
adding symlink: /usr/bin/cut -> busybox
adding symlink: /usr/bin/dd -> busybox
adding symlink: /usr/bin/df -> busybox
adding symlink: /usr/bin/dirname -> busybox
adding symlink: /usr/bin/dmesg -> busybox
adding symlink: /usr/bin/du -> busybox
adding symlink: /usr/bin/echo -> busybox
adding symlink: /usr/bin/egrep -> busybox
adding symlink: /usr/bin/env -> busybox
adding symlink: /usr/bin/expr -> busybox
adding symlink: /usr/bin/false -> busybox
adding symlink: /usr/bin/free -> busybox
adding symlink: /usr/bin/getopt -> busybox
adding symlink: /usr/bin/grep -> busybox
adding symlink: /usr/bin/halt -> busybox
adding symlink: /usr/bin/head -> busybox
adding symlink: /usr/bin/hexdump -> busybox
adding symlink: /usr/bin/ifconfig -> busybox
adding symlink: /usr/bin/init -> busybox
adding symlink: /usr/bin/install -> busybox
adding symlink: /usr/bin/ip -> busybox
adding symlink: /usr/bin/ipaddr -> busybox
adding symlink: /usr/bin/iplink -> busybox
adding symlink: /usr/bin/iproute -> busybox
adding symlink: /usr/bin/iprule -> busybox
adding symlink: /usr/bin/iptunnel -> busybox
adding symlink: /usr/bin/kbd_mode -> busybox
adding symlink: /usr/bin/kill -> busybox
adding symlink: /usr/bin/killall -> busybox
adding symlink: /usr/bin/less -> busybox
adding symlink: /usr/bin/ln -> busybox
adding symlink: /usr/bin/loadfont -> busybox
adding symlink: /usr/bin/loadkmap -> busybox
adding symlink: /usr/bin/losetup -> busybox
adding symlink: /usr/bin/ls -> busybox
adding symlink: /usr/bin/md5sum -> busybox
adding symlink: /usr/bin/mkdir -> busybox
adding symlink: /usr/bin/mkfifo -> busybox
adding symlink: /usr/bin/mknod -> busybox
adding symlink: /usr/bin/mktemp -> busybox
adding symlink: /usr/bin/mountpoint -> busybox
adding symlink: /usr/bin/mv -> busybox
adding symlink: /usr/bin/nc -> busybox
adding symlink: /usr/bin/netstat -> busybox
adding symlink: /usr/bin/nslookup -> busybox
adding symlink: /usr/bin/openvt -> busybox
adding symlink: /usr/bin/pgrep -> busybox
adding symlink: /usr/bin/pidof -> busybox
adding symlink: /usr/bin/ping -> busybox
adding symlink: /usr/bin/ping6 -> busybox
adding symlink: /usr/bin/poweroff -> busybox
adding symlink: /usr/bin/printf -> busybox
adding symlink: /usr/bin/ps -> busybox
adding symlink: /usr/bin/pwd -> busybox
adding symlink: /usr/bin/readlink -> busybox
adding symlink: /usr/bin/reboot -> busybox
adding symlink: /usr/bin/rm -> busybox
adding symlink: /usr/bin/rmdir -> busybox
adding symlink: /usr/bin/route -> busybox
adding symlink: /usr/bin/sed -> busybox
adding symlink: /usr/bin/seq -> busybox
adding symlink: /usr/bin/setfont -> busybox
adding symlink: /usr/bin/sh -> busybox
adding symlink: /usr/bin/sha1sum -> busybox
adding symlink: /usr/bin/sha256sum -> busybox
adding symlink: /usr/bin/sha512sum -> busybox
adding symlink: /usr/bin/sleep -> busybox
adding symlink: /usr/bin/sort -> busybox
adding symlink: /usr/bin/stat -> busybox
adding symlink: /usr/bin/strings -> busybox
adding symlink: /usr/bin/sync -> busybox
adding symlink: /usr/bin/tac -> busybox
adding symlink: /usr/bin/tail -> busybox
adding symlink: /usr/bin/telnet -> busybox
adding symlink: /usr/bin/test -> busybox
adding symlink: /usr/bin/tftp -> busybox
adding symlink: /usr/bin/touch -> busybox
adding symlink: /usr/bin/true -> busybox
adding symlink: /usr/bin/umount -> busybox
adding symlink: /usr/bin/uname -> busybox
adding symlink: /usr/bin/uniq -> busybox
adding symlink: /usr/bin/uptime -> busybox
adding symlink: /usr/bin/vi -> busybox
adding symlink: /usr/bin/wc -> busybox
adding symlink: /usr/bin/wget -> busybox
adding symlink: /usr/bin/yes -> busybox
adding file: /usr/sbin/kmod
adding symlink: /usr/lib/libz.so.1 -> libz.so.1.2.8
adding file: /usr/lib/libz.so.1.2.8
adding symlink: /usr/bin/depmod -> kmod
adding symlink: /usr/bin/insmod -> kmod
adding symlink: /usr/bin/rmmod -> kmod
adding symlink: /usr/bin/lsmod -> kmod
adding symlink: /usr/bin/modprobe -> kmod
adding symlink: /usr/bin/modinfo -> kmod
adding file: /usr/sbin/blkid
adding symlink: /usr/lib/libblkid.so.1 -> libblkid.so.1.1.0
adding file: /usr/lib/libblkid.so.1.1.0
adding symlink: /usr/lib/libuuid.so.1 -> libuuid.so.1.3.0
adding file: /usr/lib/libuuid.so.1.3.0
adding file: /usr/sbin/mount
adding symlink: /usr/lib/libmount.so.1 -> libmount.so.1.1.0
adding file: /usr/lib/libmount.so.1.1.0
adding file: /usr/sbin/switch_root
adding file: /init_functions
adding file: /init
adding file: /usr/lib/modprobe.d/usb-load-ehci-first.conf
-> Running build hook: [/usr/lib/initcpio/install/udev]
adding file: /etc/udev/udev.conf
adding file: /usr/lib/systemd/systemd-udevd
adding symlink: /usr/lib/librt.so.1 -> librt-2.18.so
adding file: /usr/lib/librt-2.18.so
adding symlink: /usr/lib/libkmod.so.2 -> libkmod.so.2.2.5
adding file: /usr/lib/libkmod.so.2.2.5
adding symlink: /usr/lib/libacl.so.1 -> libacl.so.1.1.0
adding file: /usr/lib/libacl.so.1.1.0
adding symlink: /usr/lib/libpthread.so.0 -> libpthread-2.18.so
adding file: /usr/lib/libpthread-2.18.so
adding symlink: /usr/lib/libattr.so.1 -> libattr.so.1.1.0
adding file: /usr/lib/libattr.so.1.1.0
adding file: /usr/bin/udevadm
adding file: /usr/bin/systemd-tmpfiles
adding symlink: /usr/lib/libcap.so.2 -> libcap.so.2.22
adding file: /usr/lib/libcap.so.2.22
adding file: /usr/lib/udev/rules.d/50-udev-default.rules
adding file: /usr/lib/udev/rules.d/60-persistent-storage.rules
adding file: /usr/lib/udev/rules.d/64-btrfs.rules
adding file: /usr/lib/udev/rules.d/80-drivers.rules
adding file: /usr/lib/udev/ata_id
adding file: /usr/lib/udev/scsi_id
adding file: /hooks/udev
-> Running build hook: [/usr/lib/initcpio/install/autodetect]
caching 44 modules
-> Running build hook: [/usr/lib/initcpio/install/modconf]
adding dir: /etc/modprobe.d
adding file: /etc/modprobe.d/alsa-base.conf
overwriting file: /usr/lib/modprobe.d/usb-load-ehci-first.conf
-> Running build hook: [/usr/lib/initcpio/install/block]
adding module: scsi_mod
adding module: sd_mod
adding module: cdrom
adding module: sr_mod
adding module: libata
adding module: pata_acpi
adding module: ata_generic
adding module: libahci
adding module: ahci
adding module: ata_piix
adding module: usb-common
adding module: usbcore
adding module: ehci-hcd
adding module: ehci_pci
adding module: uhci_hcd
adding module: crc-itu-t
adding module: firewire-core
adding module: firewire_ohci
adding module: mmc_core
adding module: sdhci
adding module: sdhci_pci
adding module: firewire-sbp2
adding module: usb_storage
adding module: mmc_block
-> Running build hook: [/usr/lib/initcpio/install/lvm2]
adding module: dm-mod
adding module: dm-snapshot
adding module: dm-log
adding module: dm-region-hash
adding module: dm-mirror
adding file: /usr/bin/lvm
adding symlink: /usr/lib/libudev.so.1 -> libudev.so.1.4.0
adding file: /usr/lib/libudev.so.1.4.0
adding symlink: /usr/lib/libdl.so.2 -> libdl-2.18.so
adding file: /usr/lib/libdl-2.18.so
adding file: /usr/lib/libdevmapper-event.so.1.02
adding file: /usr/lib/libdevmapper.so.1.02
adding symlink: /usr/lib/libreadline.so.6 -> libreadline.so.6.2
adding file: /usr/lib/libreadline.so.6.2
adding symlink: /usr/lib/libncursesw.so.5 -> libncursesw.so.5.9
adding file: /usr/lib/libncursesw.so.5.9
adding file: /usr/bin/lvmetad
adding file: /usr/bin/dmsetup
adding file: /usr/lib/udev/rules.d/10-dm.rules
adding file: /usr/lib/udev/rules.d/13-dm-disk.rules
adding file: /usr/lib/udev/rules.d/95-dm-notify.rules
adding file: /usr/lib/udev/rules.d/11-dm-lvm.rules
adding file: /usr/lib/udev/rules.d/69-dm-lvm-metad.rules
adding file: /usr/lib/udev/rules.d/11-dm-initramfs.rules
adding file: /etc/lvm/lvm.conf
adding file: /hooks/lvm2
-> Running build hook: [/usr/lib/initcpio/install/filesystems]
adding module: mbcache
adding module: jbd2
adding module: crc16
adding module: ext4
-> Running build hook: [/usr/lib/initcpio/install/keyboard]
adding module: hid
adding module: hid_generic
adding module: usbhid
-> Running build hook: [/usr/lib/initcpio/install/fsck]
adding file: /usr/sbin/fsck.ext4
adding symlink: /usr/lib/libext2fs.so.2 -> libext2fs.so.2.4
adding file: /usr/lib/libext2fs.so.2.4
adding symlink: /usr/lib/libcom_err.so.2 -> libcom_err.so.2.1
adding file: /usr/lib/libcom_err.so.2.1
adding symlink: /usr/lib/libe2p.so.2 -> libe2p.so.2.3
adding file: /usr/lib/libe2p.so.2.3
adding symlink: /usr/bin/fsck.ext2 -> fsck.ext4
adding symlink: /usr/bin/fsck.ext3 -> fsck.ext4
adding file: /usr/sbin/fsck
==> Generating module dependencies
==> Dry run complete, use -g IMAGE to generate a real image
[root@dokan-laptop ~]# nano /etc/modprobe.d/alsa-base.conf
options snd-hda-intel model=toshiba
options snd-hda-intel index=0
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
options snd-pcsp index=-2
options snd-usb-audio index=-2 -
In iBooks I keep getting the message failed to load resource is missing HELP!!!
In iBooks I keep getting the message failed to load because the requested resource is missing, tried deleting but still happens I can open it on my iPhone 5, but not on my iPad mini, please HELP!!!
Okay I figured out my problem. When you use the "add another email" option in FaceTime (or iMessage now), it associates that email address with your Apple ID account that you logged in under.
The Apple ID that I'm using for FaceTime isn't the same as the one iMessage defaulted to. I didn't noticed that. Once I switched iMessage to use my other Apple ID, it let me register. What's odd though is that iMessage doesn't recognize my email address as valid when I try to send myself a test message. When I logged out and into a different Apple ID, it did recognize it as registered though. Odd.
So Basically make sure the email address you are trying to register isn't listed as an alternate email address (or primary) on another Apple ID account. -
5.0.2 - Dynamic linked AE projects sometimes fail to load
I've started seeing dynamically linked After Effects comps failing to load, seemingly randomly. I wonder if anyone else is seeing this:
For example, I have one recent project that has 10 linked AE comps which are all part of one AE file. Sometimes all 10 comps load fine but on other times, a couple of them don't load and are shown as offline. Selecting 'link media' and re-linking the file then works fine.
No errors in the Premiere error window apart from the usual errors I get about unspecified errors conforming the AE .cfa files (which I've always had on most projects that have AE links). Maybe I should post about those too...
Paul.I think Jeremy is assuming you meant linking Premiere Pro CS5 to After Effects (the program) CS3, which won't work, obviously. You're referring to project files from CS3, that are bumped up to CS5, however.
That said, you'll still need to relink when moving projects forward. There were some fundamental changes made to both of the programs and the way their project files are treated from CS3 to CS5 (and from CS3 to CS4 and from CS4 to CS5, for that matter). As a result, Dynamic Link cannot connect to a project created on an older version of AE; you need to open the project file, save it as a CS5 version, and manually relink the DL'ed comps in Premiere. That shouldn't be too, difficult, however: simply select all of the offline DL comps, right-click and select Relink. Navigate to the NEW AE project file, and select it; the Dynamic Link window will open. Once you select the first correct comp, all of the others should automatically relink, but if not, you'll have to do it one-by-one. Maybe a pain, but such is the price we pay for progress
Maybe you are looking for
-
Photoshop CS2 redraw garbage when moving around an image window on my G4 laptop
Hi.I recently had to reinstall Photoshop CS2 onto my Mac Laptop 1.5 GHz PowerPC G4, running system 10.4.11, which required a new hard drive after the old one died. I am immediatly encountering a serious redraw/image repositioning problem in Photoshop
-
T420 - Intel Wireless and Windows XP issue?
Has anyone else seen any issues with using the Intel Wireless Advanced-N 6205 card on Windows XP? I have a 4178-6UU and it will work for a while, then just stop receiving packets, but will not disconnect even though it doesn't work and I am no longer
-
I want to use microsoft office on my mac. I need it to run on windows platform. Which is better: boot camp or parallels 7 ?
-
Steps to create a Network!
Hello guys! I have a road table... And I created 2 tables: node_topo and link_topo, using scripts from lucvanlinden: Re: Spatial Network constraints Everthing is all right, but I stucked now... What is the next step ? In the end I need calculate the
-
Instalation Problem - 10g - DHCP machine - Forms too slow if connected
Just installed the latest release of Oracle Database and Developer Suite (10g) on a machine with cable connection to the Net, with DHCP. Followed the instructions regarding the installation of the Loopback Adapter. It was not possible to follow all t