My iCal has deleted previous months .any ideas?
My iCal on iPhone and iPad has deleted all previous months and some future dates . If anyone has any idea what to do all help would be greatly appreciated.
Leo
My iCal on iPhone and iPad has deleted all previous months and some future dates . If anyone has any idea what to do all help would be greatly appreciated.
Leo
Similar Messages
-
iCal has dropped a monthly event for the previous four months....... why did it disappear? and where is it? It was the same event but a different day each month.
I installed this same digitizer in my T|X some weeks ago. Some discussion of my experience may be found in this Usenet posting and subsequent thread.
The stock digitizer in my T|X had always had some significant alignment issues (for which PowerDigi was able to compensate very nicely) and sensitivity which was uneven, but which usually required a heavier touch than I liked.
Eventually, it began to develop a “dead spot” near the upper left. My T|X was under warranty, so I probably ought to have sent it in to Palm to be repaired, but I wasn't willing to be without it for the required amount of time, and I've heard enough reports of other T|X owners getting unsatisfactory results this way. I'd heard enough good reports about the PDAPARTS.COm digitizer, that I decided that the only acceptable way to repair my T|X would be to install one of those.
After however many weeks it has been, I am still very pleased with the results. It continues to work flawlessly; it is much more sensitive, so it doesn't require nearly so heavy a touch, and I very much like the hard feel that it has, compared to the spongier feel of the stock digitizer.
My wife's T|X still has its stock digitizer, and it has so far not shown any of the same problems that mine did, or for which the T|X has become notorious, but the feel is noticeably inferior. She's content with it the way it is, but I think that if I were to ever buy another T|X for myself, I wouldn't wait for the stock digitizer to fail. The PDAPARTS.COM digitizer is simply superior in every imaginable way; and, in my opinion, a T|X with the PDAPARTS.COM digitizer installed is sufficiently superior to one with the stock digitizer (even if it isn't defective) to be very much worth the expense and trouble of installing it.
Post relates to: Palm TX -
Hi, I loaded an iTunes card and bought an audiobook a few weeks back! I was unable to download it because my wifi was down, my wifi has just been fixed but now my audiobook purchase is not available but the cash has been taken? Any ideas how to solve this
When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.
-
I am being prompted to update iPhoto and iMovie, but getting the message: "To update this application, sign in to the account you used to purchase it." These came already loaded on my laptop, and my email has not changed. Any ideas or work-arounds?
Has your Apple ID changed, that's the one that matters.
You need to sign in under the account that purchased these apps (did you buy this Mac new) -
When trying to download the new iPhone version, I keep getting an error message that my network connection has timed out. Any ideas how to fix this?
This is asked and answered many time each day. The forum search bar is on the right side of this page.
Disable your firewall/security software and try again. -
After upgrading my Macbook Air to OS Yosemite it doesn't recognise the 3G USB modem which was working previously. Any ideas?
Hi ..
Reset the PRAM > About NVRAM and PRAM
Those instructions are for Mavericks but will work on Yosemite as well.
Then try the USB modem. -
I am trying to upgrade two MACs to Maverick. I have been successful with My Power Mac but unable to get my Imac to load. I am running Snow Leopard on the Imac. When I go to the App Store it shows that it has been downloaded. Any ideas? Any ideas
You stated; " I have been successful with My Power Mac "
A Power Mac is incapable of being upgraded to Mavericks. It is a PPC Mac which can only run versions of OS X up to 10.5.8 and no higher. Any version of OS X higher that 10.5.8 requires an Intel processor to run.
Does the iMac meet the hardware requirements for Mavericks?
Allan -
Every time i try to download or buy or update my apps for apple it says my apple id has been disabled. Any ideas?
Apple ID is Disabled - Apple Club
Apple ID- "This Apple ID has been disabled for security reasons" alert appears -
Question
My iGoogle homepage is not showing any gadgets but they are there in IE. If I restart with AddOns disabled they are shown. I have disabled all AddOns separately and it has made no difference.Any ideas?I found that the culprit was Adblockplus. To solve it : ABP>drop down menu>Report issue on this page>click bullet blocking too much and follow steps.
-
I have 11.52GB of 'other' stored on my ipod but I cannot see or delete the content. any ideas?
I have 11.52GB of 'other' stored on my ipod but I cannot see or delete the content. any ideas?
Restore the device in iTunes
-
We are creating a photo book and on the cover in the lower right hand corner there is part of the title. The cover title is centred below the cover picture. We did not create it and cannot find how to delete it. Any ideas?
Preview according to this article and see what it does. http://support.apple.com/kb/PH2486
The printed book will match the preview
LN -
i know this sounds weird but i went to Cleveland from florida and when i returned Siri has an australian accent. any ideas?
Well you can't use it. The iOS 7 Activation Lock is pretty secure and you can't bypass it.
-
I'm having trouble downloading Aps on my iPad . I have several that have frozen during downloading and I can't delete them. I've tried resetting my iPad, airplane mode and going through iTunes and Aps store, nothing has helped. Any ideas?
I'm having a similar problem, but different circumstances. Someone gave me their iPod nano to load with tunes. I, myself, don't own an iPod, and the flimsy booklet that came with this device is pointless -- no real info. Anyway, once it was charged, I chose tunes from my library to upload to the iPod, but the entire library began to load (not just the checked selections). I made several attempts to resolve this, including an attempt to restore the iPod to its original settings. Unfortunately, now the computer and iTunes will not recognize this iPod (when iTunes is open and iPod is connected, iPod does not appear in source list, and desktop only reads the device as "iPod", as opposed to what it was originally reading it as) and I can't even get back to the part of iTunes that asks me if I want to restore the iPod. Do I have to bring this to an Apple store, or is there anyone out there who can tell me how to resolve this? I tried the "5 R's" recommended by Apple, but they don't seem to work.
mich solo -
Delete previous months request
Hi,
I have a cube with 2 infosources.From 1st infosource the load is weekly load.My requirement is to delete the previous months requests from this 1st infosource.Any one have some idea on how to delete the Previous months request?Hi ChndraShekar,
you can do this by using that cube's infopackage. whre ther is option in data targets tab " selective deletion(s) double click it thr you get many options of data selection for deletion of your required request.
hope it surly solves your problm, assn pnt if it helps.
Regards,
Neelima. -
Hi I have been successfully printing from my ipad2 wirelessly to HP printer but for no apparent reason it has stopped . Any ideas please ?
Try clearing your printer queue. Double click the bottom button to see your active apps and scroll to find your printer app. Cancel all documents listed for printing. Hopefully you'll b able to print again. This solution worked for me recently.
Maybe you are looking for
-
Just can't find you and I do not want to have this Google bar as my opening page. Can't fix with re-install. What happened to you and why is this so difficult without warning? Did I miss the memo? I just want to use firefox as my browser and I am not
-
Hi All.... Iam having field in table control to display the output... Can i restrict that field as to give non zero values only? like.... write:/ itab-field no-zero. ....in reports..... Thank you, Naveen.
-
I am looking for a complete list of Adobe Photoshop error codes/messages for the current version CS6. Any insight is valuable! If there is such a list, or a possible way of creating such, please let me know.
-
Order-column needs to be numeric?
Hi, I've got a List attribute mapped as one-to-many that I want ordered by a date column, but I am getting an exception saying that the order-column specified is not numeric. Does my order-column really have to be numeric? Why can't I order by a date
-
i have a unique problem with my bb ...when post a sms facebook status with my bb curve 8520 it being changed into some digits form like 017755969.... putting me into troubles!!