My idea is using the flshlight permanently as kind of "studio light" to take photos in macromode:
My idea is using the flshlight permanently as kind of "studio light" to take Photos in macromode:
Is it possible to take photos with the iphone when the flashlight shines permanently?
When the light is permanently on, it would be great to take photos without flash in dark areas or in macromode.
Especially for medical documentation (Dermatology etc.).
I didn´t found any netsolution.
This could be an outstanding feature for many people.
How could this be possible? App-Solution?
My idea is using the flshlight permanently as kind of "studio light" to take Photos in macromode:
Is it possible to take photos with the iphone when the flashlight shines permanently?
When the light is permanently on, it would be great to take photos without flash in dark areas or in macromode.
Especially for medical documentation (Dermatology etc.).
I didn´t found any netsolution.
This could be an outstanding feature for many people.
How could this be possible? App-Solution?
Similar Messages
-
Is the Bea weblogic workshop IDE develop use the Java?
is the Bea weblogic workshop IDE develop use the Java?
beautiful UI.I like it.
but i think it develop use C#!Dear carls:
Thank you very much.I'm look forward to the day it is released!
"Carl Sjogreen" <[email protected]> wrote:
Thanks for the compliment!
At the current time, BEA is not planning to release the workshop look and
feel to third parties, or make it available via open source. However, its
all standard swing code -- just a lot of custom drawn controls!
In a later release we may open up these libraries to partners who want to
work closely with the Workshop environment.
-Carl Sjogreen, Product Manager
"andiyang" <[email protected]> wrote in message
news:3cff0bc5$[email protected]..
Dear Anurag Pareek:
Thank u very much,I want to know to do it?is it Open and standard ?where has develop
resource about it?
thank u very much!
andiyang
"Anurag Pareek" <[email protected]> wrote:
Hi,
As beautiful as it looks, it has been developed entirely using Java Swing
components:-)
Regards,
Anurag
Workshop Support
"andiyang" <[email protected]> wrote in message
news:3cfd727d$[email protected]..
is the Bea weblogic workshop IDE develop use the Java?
beautiful UI.I like it.
but i think it develop use C#! -
Used the file transfer software from Apple to move music and photos to iMac. After several hours it was "successful" but I can't locate it on the iMac. Any ideas for the rookie?
The music should be in iTunes and your photos should be in iPhoto. What happens if you launch those applications?
Best of luck. -
my wife and 1 both have new iPhone 4's. Is it best to use the same apple id so we can share music and photo's?
Would suggest Seperate Apple IDs > http://support.apple.com/kb/HE37
SHARING iTunes MUSIC
http://macmost.com/five-ways-to-share-music-in-itunes.html
Also...Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
have the new iphone 4s and the camera shutter wont open so i can not take photos it is only 4 weeks old dose anyone know why?
Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?
The next step would be to restore the iphone as new in iTunes. If that doesn't work, make an appointment at the Genius Bar at the nearest Apple Store.
Best of luck. -
Is it a good idea to use the A/C adapter without the battery installed?
Hi everyone!
I have a question. When using my iBook, is it a good idea or is it adviceable to power my iBook using the A/C adapter only, without the battery installed - for the purpose of preserving my battery? I tend to use my iBook heavily and as a desktop computer replacement.
My iBook is a G4 1.33 Ghz 12" model running OS X Version 10.4.10 and my peripherals are optical mouse, keyboard, powered speakers and an external hard drive.
Thanks.
iBook G4 Mac OS X (10.4.10)Well the service manual says:
"Warning: Never turn on the computer unless all of its internal parts are in place and it is fully reassembled. Operating the missing parts can damage the computer or cause injury."
Without a battery in place the battery connector would be exposed and things always find their way into the opening. I've heard of people keeping a bad battery in place just for that reason. Also if you keep it plugged in all the time it won't lose it's date/time.
If you check "set Date & Time automatically" in the "Date & Time" system preferences the iBook will automatically reset the time if you have a internet connection.
Richard -
I had installed Aurora 21.0a2 some time last year and had only used it once. I recently uninstalled it and without knowledge that it used the same exact App Data files as Firefox does, so I removed all data. Now I have lost 100's of bookmarks... I do backup my system often but not my browser data, I had only once made a copy of my Firefox data in August 2013, so I was able to copy and paste that info, which had maybe 35-40% of my bookmarks...
I had tried Windows Recovery a couple times, it says it wasn't able to restore the data successfully each time. I had also tried Recuva, not really sure if it found the file I was searching for, so I would kindly ask any of the Forum Mods or users who would suggest this method, what "file" exactly should I search for.
I had been searching for ".default" and ".defaults" files, and any other data relating to Firefox but with no success.
Do I really have any options of recovery or ....?You should never choose to remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
You will have to try to recover a recent JSON backup (bookmarks-####-##-##_xxxx.json) in the bookmarkbackups folder of that removed Firefox profile folder with Recuva or another undelete utility.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox -
More than 4 IDE devices using the Raid controller on the MSI-6567 645E Max2-LRU ?
Here is the specs page of the board
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=79
I have a HD and a CD-ROM drive on the first IDE controller, and an HD and a CD-writer on he second IDE controller
Since the specs say the board only supports 4 IDE devices I was wondering-
1) Can I connect another HD to one of the onboard Raid controllers, and work with it in addition to all the other IDE devices currently plugged in, without RAID?
i.e. CD-writer, CD-ROM, and 3 HD's working together ?
2) Can I connect 2 more HD's, one to each onboard RAID controller and have them work in raid in addition to all existing IDE deviced?
i.e. CD-writer, CD-ROM, 2 HD's and 2 more HD's in RAID format working together ?
Thanks in advance..But like I said, I do not intend to connect CD-ROMS to the RAID controllers, only HD's - the CD-ROM and CD-Writer are currently connected to the normal IDE controllers and I don't plan on changing that in any case
My question was whether or not i can add more HD's to my current system by adding them to the RAID IDE's
simply put, to be 100% clear my question is this -
will the current configuration work:
IDE 1 = CD-ROM + HD1
IDE2 = CD-WRITER + HD2
RAID IDE1 = HD3
and will this one work:
IDE 1 = CD-ROM + HD1
IDE2 = CD-WRITER + HD2
RAID IDE1 = HD3
RAID IDE2 = HD4
when HD3&4 work in RAID mode
Thanks again for you help
RE your suggestion - why not put a CD-ROM and an HD on the same IDE ? that way my HD's are connected to different IDE controllers for better performance -
Use the NetWeaver 7.1 CE Developer Studio at NW 7.0 PORTAL
Hi NW Experts,
I have a SAP NETWEAVER 7.0 portal running and need to develop a Web Dynpro
Java application. Is it therefore possible to use the new SAPNWCE71TrialSP1Preview_DevStudio? Or do I have to stay on the old
developer studio- NW_DS_700SP14; In the new CE developer studio there are a
few new components I would need for my development;
When I try to deploy with the SAPNWCE71 to the portal I get the following exception:
03.04.2008 07:50:41 /userOut/daView_category (eclipse.UserOutLocation) [Thread[Deploy Thread,5,main]] INFO:
[001]Additional log information about the deployment
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[D:\usr\sap\EPA\JC00\SDM\program\log\sdmcl20080403055142.log]/>
<!PATTERN[sdmcl20080403055142.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[Cp1252]/>
<!LOGHEADER[END]/>
Apr 3, 2008 7:51:42 AM Info: -
Starting deployment -
Apr 3, 2008 7:51:42 AM Info: Error handling strategy: OnErrorStop
Apr 3, 2008 7:51:42 AM Info: Prerequisite error handling strategy: OnPrerequisiteErrorStop
Apr 3, 2008 7:51:42 AM Info: Update strategy: UpdateAllVersions
Apr 3, 2008 7:51:42 AM Info: Starting deployment prerequisites:
Apr 3, 2008 7:51:43 AM Info: Loading selected archives...
Apr 3, 2008 7:51:43 AM Info: Loading archive 'D:\usr\sap\EPA\JC00\SDM\program\temp\temp7122KapPlan.ear'
Apr 3, 2008 7:51:43 AM Info: Selected archives successfully loaded.
Apr 3, 2008 7:51:43 AM Info: Actions per selected component:
Apr 3, 2008 7:51:43 AM Info: Update: Selected development component 'KapPlan'/'local'/'LOKAL'/'0.2008.04.03.07.49.58'/'0' updates currently deployed development component 'KapPlan'/'local'/'LOKAL'/'0.2008.04.02.18.04.14'/'0'.
Apr 3, 2008 7:51:44 AM Info: Ending deployment prerequisites. All items are correct.
Apr 3, 2008 7:51:44 AM Info: Saved current Engine state.
Apr 3, 2008 7:51:44 AM Info: Starting: Update: Selected development component 'KapPlan'/'local'/'LOKAL'/'0.2008.04.03.07.49.58'/'0' updates currently deployed development component 'KapPlan'/'local'/'LOKAL'/'0.2008.04.02.18.04.14'/'0'.
Apr 3, 2008 7:51:44 AM Info: SDA to be deployed: D:\usr\sap\EPA\JC00\SDM\root\origin\local\KapPlan\LOKAL\0\0.2008.04.03.07.49.58\temp7122KapPlan.ear
Apr 3, 2008 7:51:44 AM Info: Software type of SDA: J2EE
Apr 3, 2008 7:51:44 AM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Apr 3, 2008 7:51:45 AM Info: Begin of log messages of the target system:
08/04/03 07:51:44 - ***********************************************************
08/04/03 07:51:44 - Start updating EAR file...
08/04/03 07:51:44 - start-up mode is lazy
08/04/03 07:51:44 - EAR file updated successfully for 125ms.
08/04/03 07:51:44 - Start updating...
08/04/03 07:51:44 - EAR file uploaded to server for 47ms.
08/04/03 07:51:44 - Successfully updated. Update took 438ms.
08/04/03 07:51:44 - Deploy Service status:
08/04/03 07:51:44 - Application : local/KapPlan
08/04/03 07:51:44 -
08/04/03 07:51:44 - webdynpro/resources/local/KapPlan - WEB
08/04/03 07:51:44 - ***********************************************************
Apr 3, 2008 7:51:45 AM Info: End of log messages of the target system.
Apr 3, 2008 7:51:45 AM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Apr 3, 2008 7:51:45 AM Warning: Finished with warnings: development component 'KapPlan'/'local'/'LOKAL'/'0.2008.04.03.07.49.58'/'0':
Caught exception during application startup from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while starting application local/KapPlan and wait.
Reason: Clusterwide exception: server ID 3705850:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application local/KapPlan cannot be started. Reason: it has hard reference to resource tcwdapi with type application, which is not active on the server.
at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToApplication(ReferenceResolver.java:597)
at com.sap.engine.services.deploy.server.ReferenceResolver.processMakeReference(ReferenceResolver.java:399)
at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:328)
at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:162)
at com.sap.engine.services.deploy.server.application.StartTransaction.begin(StartTransaction.java:136)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:342)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:126)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:245)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4761)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4666)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4639)
at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception while starting: sap.com/tcwdapi', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Exception while starting: sap.com/tcwdapi
at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.prepareStart(PortalRuntimeContainer.java:527)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4415)
at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToApplication(ReferenceResolver.java:589)
... 21 more
Caused by: com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception while starting: SAPJ2EE::local/KapPlan', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Exception while starting: SAPJ2EE::local/KapPlan
at com.sap.portal.prt.sapj2ee.SAPJ2EEPortalRuntime.getAndStartSAPJ2EEApplicationItem(SAPJ2EEPortalRuntime.java:886)
at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.prepareStart(PortalRuntimeContainer.java:511)
... 23 more
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: [ExternalApplicationItem.prepare]: SAPJ2EE::local/KapPlan
at com.sapportals.portal.prt.core.broker.ExternalApplicationItem.prepare(ExternalApplicationItem.java:188)
at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:232)
at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.start(SAPJ2EEApplicationItem.java:192)
at com.sapportals.portal.prt.service.sapj2ee.Mediator.getAndStartExternalApplication(Mediator.java:132)
at com.sap.portal.prt.sapj2ee.StartPortalApplication.coreRun(StartPortalApplication.java:59)
at com.sap.portal.prt.sapj2ee.SAPJ2EEPortalRuntime.getAndStartSAPJ2EEApplicationItem(SAPJ2EEPortalRuntime.java:882)
... 24 more
Caused by: com.sapportals.portal.prt.core.broker.PortalApplicationNotFoundException: Could not find portal application tcwdapi
at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:415)
at com.sapportals.portal.prt.core.broker.ExternalApplicationItem.prepare(ExternalApplicationItem.java:180)
... 29 more
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Apr 3, 2008 7:51:45 AM Info: Starting to save the repository
Apr 3, 2008 7:51:45 AM Info: Finished saving the repository
Apr 3, 2008 7:51:45 AM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Apr 3, 2008 7:51:45 AM Warning: -
At least one of the Deployments finished with warning(s) -
>>> ROOT CAUSE
Reason: it has hard reference to resource tcwdapi with type application, which is not active on the server.
>>>
It seems that the resource tcwdapi is missing; i cannot find this resource in the
VA on the portal; Is this resource specific to the CE?
Thanks before for your help! I would be glad for any recommandaations by your side;
Kind regards,
PeterHello Peter,
as far as I know you cannot "downgrade" from WD 7.1 to 7.0.
An upgrade from NW 7.0 to 7.1 very much depends on the components installed. If you're using MSS, BI, MDM or any other of the software components which run on 7.0 an upgrade will not be possible. In such cases I suggest that you kepp your 7.0 portal as your primary portal, run your application on the 7.1 portal and link them together via the federated portal network.
Of course the disadvantage is that you need to maintain a separate portal for a certain time - not very nice.
Hope this helps.
Stefan -
I have my iPhoto set to an external drive, when it was in use the usb disconected as i was moving my mac air, when i re-conected a message said (your photo library is either in use by another application or has become unreadable).
I have tried shutting it down and then re opening iPhoto but get the same message.
The reason for the external drive was there was not enough room on my hard drive, I have around 7000 photos on it.
is there a simple fix?
Regards
DaleThese are your options:
1. Restore the iPhoto library from the most recent backup that predates the issue.
Advantages: Always works, if library damage is causing the problem and the backup is intact.
Disadvantages: Impossible if you don't have a backup. All changes made since the backup are lost.
2. Repair or rebuild the library. Be sure to back it up first.
Advantages: May solve the problem with no loss of data.
Disadvantages: May fail. May take a long time if the library is large.
3. Scavenge the library with a third-party application called "iPhoto Library Manager," which you can find in a web search. From the application's menu bar (not the iPhoto menu bar), select Library ▹ Rebuild.
Advantages: All images and albums should be preserved.
Disadvantages: All books, calendars, and slideshows will be lost. -
I occasionally have the need to export photos from the iPad to an SD card (photos that were imported using the camera kit). This is useful for e.g. to print photos while travelling. So far I have not found this functionality anywhere, including in any apps available on iTunes. Can anyone help?
The camera connection kit can only be used to import photo/video files from a camera, SD card or USB flash drive. You can't import other types of files. You can't export any type of files using the camera connection kit.
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
This may be of interest.
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
Cheers, Tom -
I have windows 7 and Acrobat X Pro.
When I use the snapshot tool I cannot figure out how to adjust the brightness on that image? On my old computer a picture tollbar would pop up. A lot of images are very light and I need to darken them.My not be much you can do. However, I would just clip them into my favorite image tool (in my case IrfanView) and adjust there.
-
How do i access my ipad that has been dsiabled due to an incorrect password?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I have gone to my ATT and store for help but it's not "synching in to my head" on how to do it. Which means I consider this a bit to complicated. So how do I manage what goes on and off my phone. It seems that somewhere it should ask before it does it. Anyway in a step by step process how do I get the pictures off my iphone.
thanks
DennisYou sync material to your Phone via iTunes.
Regards
TD -
How to use the PDK 2.0 within Visual Studio 2005
Hi there,
can you help me? How do I include the needed templates and context menus to the 2005 environment?
Hmm, I wonder if it is possible at all, to program in VS2005
ThanksHi,
The current version (2.0) of the PDK does not support 2005.
I know that there are plans to support the PDK for .NET for VS 2005.
I am sure that when there will be a clear road-map, SAP will publish it.
Best Regards,
Tsachi
Maybe you are looking for
-
How do i create an animation with one frame for each layer?
I have 76 sequential images that i've loaded as layers using bridge, then aligned using photoshop. I would now like to create a 76 frame animation with one animation frame for each layer (the layers are in sequential order). is there an easy way to d
-
Monitoring/Alerting Set up options in SM - System Monitoring
Comrades When configuring Solution monitoring in SM 4.0 for our lanscape the customised CCMS monitor set (created in RZ20 of Target Sysem) needs to be imported during set-up system monitoring process 1.Is it possible to import the customised CCMS con
-
ipod classic shows disk 3/4 full but when i look in the folders it shows zero for music and zero for podscasts. i can not access these folders on the ipod or when it does connect to my windows computer thru itunes. it does not connect 90% of the t
-
I can take Oblique/Bold of of my text in pages 5.1
Hello, I have been trying to type up a movie script (movie scripts involve having to switch between bold/oblique/regular all the time) and once I got to a certain paragraph and tried to change back to regular from bold but it didn't work. I tried usi
-
X200 CPU reaches 100 celsius degrees. is this normal?
I'm using LenovoThinkVantage Toolbox to do a CPU stress test and and the same time I'm running TPFanControl to monitor the speed of the fan and the temperature of the CPU. When I run the CPU stress test the temperature of the CPU reaches 100 degrees