My ideapad fail to upgrade the OS
Hi there,
I got the idea S510p weeks ago, which comes with windows 8 and I have the auto windows update on. But everytime after the update done, and when it reboot, it will halt for a while and reboot again and jump to restore the old system. I have to unplug the power cord, let it stay for a while and reboot again. It really happens every times.
Also I try to update it to windows 8.1, after the update done and reboot, it jump to the page that restoring old system.
I don't know what's going on with that
No, install disks that come with a machine are specific to that machine and will not work on a different model. Further, doing so would violate licensing agreements.
The way to get your MacBook to a later system is first to find out how high it can go. The 2007 MacBooks can only go as far as 10.7.5 (Lion) and it will never run 10.8 (Mountain Lion) or higher.
To get to Lion you would need to first install Snow Leopard (Mac OS X 10.6.8) on the MacBook. You can purchase a Snow Leopard install disk from Apple by going to the online store.
Once you have Snow Leopard installed and updated as far as it will go - 10.6.8 - call Apple's sales department - (800) MY-APPLE in the USA - and ask to purchase a download code for Lion. Use this in the Mac app store to download and install Lion.
Best of luck.
Similar Messages
-
'dns' server failed to upgrade the Network Registrar configuration databases!!!
I have problem with installation the Network Registrar 7.2. According to the install log: "The 'dhcp' server failed to upgrade the Network Registrar configuration databases !!! See C:\NetworkRegistrar\Local\temp/dhcp_upgrade_status_log for details." The dhcp_upgrade_status_log is not found on my PC.
Do somebody familar with such problem?
Thank in advance.Hi Dave,
Any luck on this thread? Where you able to find a work around on this problem? I am encountering also the same problem thou my OCR and Voting Disk are on raw partition.
I have done clean-up using the "dd" command and re-install CRS a couple of times and still with no luck...
Hope RAC gurus can help us on this.
Any help would be much appreciated.
Thanks! -
Failed to upgrade the iOS 4.2 for my iPad
My iPad information: iPad 16G, software version: 3.2.2.
iTune version: 10.1.0.56.
when I try to upgrade the iPad to iOS 4.2, then the iTune always show "error = - 3259". I have try many times, but still fail.Hi Carolyn, hope you might be kind enough to direct me further. I experience the same -3259 error but only after the download of the iOS 4.2 is complete and has progressed to the "processing file" stage.
Given that other iStore downloads via iTunes are successful, I can only infer there must be something special about the type of file in this download that my firewall or antivirus doesn't like. Pausing virus protection or turning off firewall does not seem to have an effect. I did not take the risk step of disabling both; I've asked support for file type data or something else I can use to allow it to pass .. but no joy there.
Have an appointment next week at an Apple store, but hoping some clued-in person might have the answer before that becomes necessary. Difficult as the iPad is actually working fine, just cannot obtain the file to update the OS!
Thanks for whatever thoughts you have.
David -
ITunes Match and failing to upgrade some of my tracks
Does anyone know why ITunes Match sometimes fails to upgrade certain popular tracks to 256 AAC when it's established that the song/track exists in the Itune store? I just completed the reorganization of my ITunes library today after using iTunes Match to upgrade the compression quality of my songs. And out of approximately 1100 songs, iTunes Match failed to upgrade the compression quality on about a 100 of these tracks. It's not a big deal but I do find it very interesting with popular tracks. As just one example to make my point, Sheryl Crow's 1998 hit My Favorite Mistake was not converted from the current 128 kbps to 256. I could list a number of others that I see in the ITunes Store. And it doesn't make any sense. If the song is in the ITunes store, it should be making a match with the tracks in my library. All of my music meets the minimum compression quality to be eligible for upgrades to 256 AAC under the ITunes Match service. Any thoughts/feedback from anyone? Thanks.
Hi
Read this user tip Some User Tips (April 2015)
Jim -
Failure to Upgrade the software of my AIP-SSM-20
Dear all,
I have failed to upgrade the software of my AIP-SSM-20 on the ASA. The AIP-SSM-20 had an Image of version IPS-K9-5.1-7-E1.pkg and I tried to upgrade it to IPS-K9-6.1-1-E2.pkg but after the upgrade the AIP-SSM-20 became unusable. I can no longer log on to the IPS Module from the ASA. When I initiated a connection to the module with session 1 command, the systems says card in slot 1 did not respond to system request. I decided to restored the system image from the ASA by using the hw-module module 1 recover configure and hw-module module 1 recover boot commands but has so far failed.When I issued the command hw-module module 1 boot command, the status of the IPS shows recover and would be in that state even for days.And my TFTP server shows that it is transfering the images to the IPS.
I don't know where I have gone wrong and I would be very happy if somebody can give me a procedure that would help me to re-image the software of the IPS.
Any help would be highly appreciated.
Claude FozaoHalijen has already send you a link to reimage,let me briefly answer what a system image and upgrade files are and the difference between them
The System Image files are meant to be used only when a complete erasing of the sensor's image is needed. This is generally because the installed files were corrupted, or so old that it would be easier to start over and make it look like it came from the factory; than to use the standard "upgrade" files.So in case you are doing reimaging than use .img files which are system reimage files
In more than 90% of the cases, most customers will want to "upgrade" rather than do a System Image. The "upgrade" is done from within the sensor itself, and will both load the higher version as well as convert your current configuration to work with the newer version.it uses .pkg files
A usual poblem with the System Re-imaging process is that the card winds up in a boot loop because of an error. When ROMMON detects an error it reboots and tries the same steps again which usually winds up with the same error which causes a reboot, etc.....
So determining if the card is in a reboot loop, and what the error is would be the next step in your debugging process.
Execute "debug module-boot". Enter "hw-module module 1 recover stop". Wait for a few minutes, and then enter "hw-module module 1 recover boot".
The output from ROMMON on the SSM will be seen on your ASA connection.Look at the configuration being passed to the SSM's ROMMON and look for any bad entries.Watch to see if it able to download the System Image file, or if it continuously reboots.
If it continuously reboots, then look to see what error message is seen just prior to the reboot.
Some common problems:
1) Typos in IP address, gateway, tftp server IP, or system image filename.
2) If the tftp server is on the same subnet as the SSM's IP Address, then try leaving the Gateway address blank since it is not needed.
3) Remember that the IP Address is for the external interface of the SSM. So be sure you are using an address that is applicable for the network where you are pluggin in the SSM's external interface.
4) If the TFTP Server is on another subnet, then be sure there is a route to the other network. If having to route back through the ASA, then ensure that the ASA will allow TFTP packets to pass through the ASA. (The ASA could wind up blocking the TFTP packets depending on the ASA configuration)
5) Be sure the file can be downloaded from the TFTP server. Check the file permissions, and the directory where the file is located. From your desktop try to downlaod the file from the tftp server. This will ensure you are using the correct directory and that the file has correct permissions. Once common problem is that the file may be /tftpboot/sensorfiles/IPS-SSM_20-K9-sys-1.1-a-6.1-1-E1.img. But because the tftp server automatically starts in /tftpboot, you may need to NOT specify it for the file and instead just use: sensorfiles/IPS-SSM_20-K9-sys-1.1-a-6.1-1-E1.img
6) Check to make sure the file is not corrupted by running an md5sum and checking it against the value listed on cisco's web site. -
I try to purchase Pages (after upgrading to Maverick OS) and keep getting this message:
Failed to verify the preflight file. It is not signed by Apple.
How to I get past this? I cannot find anything referencing preflight file. Who can identify this?Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
From the menu bar, select
Keychain Access ▹ Preferences ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL. Log out, log back in, and test. -
Hi Friends,
We have planned to upgrade our SCCM 2012 SP1 infrastructure to SCCM 2012 R2 so we have setup test environment to test SQL database upgrade before doing same in production.
But while testing SQL database upgrade on test machine, it is getting failed with below error.
ConfigMgrSetupWizard.log
ConfigMgrSetupWizard Verbose: 1 : Scripted setup failure handling callback called. Failure: 29.
ConfigMgrSetupWizard Verbose: 1 : Received error [Setup cannot upgrade the ConfigMgr database. Contact your SQL administrator.] from native code.
ConfigMgrSetup.log
ERROR: SQL Server error: [23000][2627][Microsoft][SQL Server Native Client 11.0][SQL Server]Violation of PRIMARY KEY constraint 'ContentDistribution_PK'. Cannot insert duplicate key in object 'dbo.ContentDistribution'. The duplicate key value is (921). :
tr_ContentDistributionNotification_insert
ERROR: Failed to execute SQL Server command: ~-- ~-- Rebuild ContentDistribution tables ~-- ~IF (EXISTS(SELECT TOP 1 1 FROM dbo.SMSData WHERE SMSBuildNumber <= 7900) AND dbo.fnIsSecondary() != 1) ~BEGIN ~ exec spRebuildContentDistribution
@TruncateTables=0 ~END
Failed to create process of SetupWpf.exe.
Can anyone please help to get this resolved.
Thanks.We found out that there were duplicate entries in the PkgStatus_G and the PkgServers_G tables in the SCCM DB. We identified them, deleted them , and then we were able to run the /TESTDBUPGRADE command and it went through fine. We performed
all of this on a COPY of the PROD DB and then moved the changes in PROD. Hope this helps someone.
- Dave -
Oracle 11g upgrade prerequisite fails for all the values
Hi,
We have planned Oracle upgrade from 10.2.0.4 to 11.2.0.2. We have
followed the upgrade guide Database Upgrade Guide "Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". Our OS versionis HP-UX ia64 B.11.31. According to the upgrade guide we have set all the environment vairables. And started the Oracle 11.2.0.2 software installation prerequisite with the command " ./RUNINSTALLER -check " The result of the prerequisite check was giving the all the parameters are failed. But the parameters like Physical memory, orasid user also showing failed eventhough we are having 16 GB of physical memory & we logged on
with orasid it self and all the parameters are showing failed.
We have check the Oracle metalink note#169706.1, According to the note we have valid version of HP-UX 11.31 and some patches are already installed and some of them are not installed. But the prerequisite check showing all the patches are in failed state irrespective of some installed patches.
Regards,
SreekanthHi there
For DB upgrades to 11g there are couple technical notes .
SAP Note No. 1431793
SAP Note No. 1431797
SAP Note No. 1431800
Hope them can be useful
BR
Venkat -
SOA-INFRA is in FAILED state while upgrading the Oracle Identity Manager to 11.1.1.5
This issue ocurred when we were trying to Upgrade our OIM to version 11.1.1.5.
The installation of all the suites went fine(Oracle IDAM 11.1.1.5 and SOA Suite 11.1.1.5). The domain is also created and schemas are also upgraded. But when we create a domain , in the created domain, the SOA_INFRA applicaiton comes in the failed start, although the soa server comes up in running state.
Please find the logs below (found during server startup):
<Jul 31, 2013 12:19:36 PM BST> <Error> <org.springframework.web.context.ContextLoader> <BEA-000000> <Context initialization failed
org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'SensorManager' defined in ServletContext resource [/WEB-INF/fabric-config-core.xml]: Cannot resolve reference to bean 'FabricMesh' while setting bean property 'fabricMesh'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'FabricMesh': FactoryBean threw exception on object creation; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'FabricMeshTarget' defined in ServletContext resource [/WEB-INF/fabric-config.xml]: Cannot resolve reference to bean 'SpringServiceEngine' while setting bean property 'serviceEngines' with key [6]; nested exception is org.springframework.beans.factory.CannotLoadBeanClassException: Error loading class [oracle.integration.platform.blocks.java.SpringServiceEngine] for bean with name 'SpringServiceEngine' defined in ServletContext resource [/WEB-INF/fabric-config.xml]: problem with class file or dependent class; nested exception is java.lang.NoClassDefFoundError: weblogic/sca/api/ScaReferenceProcessor
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:275)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
at java.security.AccessController.doPrivileged(Native Method)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.DefaultListableBeanFactory.getBeansOfType(DefaultListableBeanFactory.java:308)
at org.springframework.context.support.AbstractApplicationContext.getBeansOfType(AbstractApplicationContext.java:947)
at org.springframework.context.support.AbstractApplicationContext.registerListeners(AbstractApplicationContext.jav
The following link was following for the upgrade.
http://docs.oracle.com/cd/E23943_01/upgrade.1111/e10129/upgrade_oim.htm
Any help will be much appreciated.Hi,
I found the solution to my problem in the following link:
http://blog.darwin-it.nl/2012/05/im-helping-my-new-customer-in-migrating.html
Regards,
Jeegar -
y iPad2 is frozen, I am trying to download the upgrade software but fails after a while, how can I solve the issue. I have not upgraded the iPad 2 since I bought it.
Try and force iPad into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
When I try to upgrade and install to iOS 5.1, error message prompt "operation stop running". I have tried several time but failed. Also, would like to know why always need to have wifi access in order to upgrade the version of iPad iOS, what is the purpose of 3G then? This is really nonsense using wifi + 3G iPad. need help ! Thanks.
The file is too large to download via 3G. There is a 20MB limit with 3G. The purpose of having 3G is that you have internet access everywhere and do not need to be near a WiFi hotspot or network.
Not every single thing that you do every single minute of the day on the iPad involves downloading files larger than 20MB. You can surf the internet all day long sitting out in a park somewhere with 3G - but not with a WiFi only iPad - unless you use a hotspot with it.
Try turning off your firewall and anti virus software while you try to download the iOS update. -
What can I do? Every time I download & run "iPhoto Library Upgrader" it fails to "prepare" the my iPhoto Library, so I can't open iPhoto any more.
(My MacOS & iPhoto are the latest versions.)
Ever since my last upgrades, every time I try to open iPhoto, a Alert box pops up saying, "To open your library with this version of iPhoto, it first needs to be prepared. To prepare the library, use the iPhoto Library Upgrader", and it gives 2 options: a "Learn More" button or "Quit" (iPhoto) button. The "Learn More" button links to Apple's "iPhoto '11: About the Library Upgrader" page (http://support.apple.com/kb/HT5037), but whenever I then download and run that page's linked app, the same thing happens all over again.
It does no good to rebuild the iPhoto Library (holding down the command & option keys while reopening iPhoto): the same thing happens.
It does no good to use iPhoto Library Manager (http://www.fatcatsoftware.com/iplm/) to rebuild the iPhoto Library, as was suggested elsewhere: the same thing happens.Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Since upgrading my Macbook to Lion, the time machine backups are failing - error message: "The backup disk image “/Volumes/Jackie Scanlon's Time Caps/Jacqueline Drabczynska’s MacBook.sparsebundle” could not be accessed (error -1)." I have rebooted the TIme Capsule and it worked OK, but don't want to do that every time. Any suggestions? Thanks
Any new info on this?
I had the exact same problem and went crazy and spent a hecka lot of time trying to deal with my brand new 2TB Time Capsule and almost brand new MacBook Pro. Then I thought I fixed it...and I tried SO MANY things, I don't really know what did it...except taking out any apostrophe's in names of stuff that Apple puts in there...BUT...now it's back.
Grrr... -
Hi I Run Windows 7. Since upgrading to Firefox 4.0 I am unable to "clear history" and get the message "QuickTime failed to initialize". I can delete history when in safe mode with plug-ins disabled. Re-installing quick time fails to resolve the issue. Any ideas or suggestions?
i have that quicktime problem too
-
I have an sony vivaz, i want to upgrade the software. i had downloaded the upgradtion software. bUt it fails to upgrade, even it fails when i use phone repair in pc suit.
What should i do?Hello @chavanjayesh2001... I wanted to give you some tips for when you can't update the software of your phone:
-Make sure that the Internet connection is good. If the update process is interrupted it might be due to loss of Internet connection.
-Try using another USB cable and usb port in your computer.
-Try using another PC.
-Temporary disable any firewalls and or antivirus software.
-Start your PC in “Safe mode with networking” mode. This is done by pressing F8 during PC boot. When Windows is started in safe mode, try taking the update again.
Maybe you are looking for
-
Satellite Pro A200-18P - microphone / headphone jack not working with Vista
Hi, I have installed Windows Vista onto this laptop which was originally an XP, but I have not got the headphone jack working. How do I turn it on or do I have to download it from toshiba website?
-
Transfer of FiOS Service to a new location
We are building a house and transferring our existing FiOS account (internet/TV/phone) to this new address. Verizon Tech Team said FiOS is available at the new address and the new connection will be Aerial. New house is a pipe-stem house with a 500 f
-
How to determine the Host a VM runs on, if VM is 2012
Morning all HyperV host on Win2012 (standard, not R2), guest is the same. Time was, you could query HKLM\SOFTWARE\Microsoft\Virtual Machine\Guest\Parameters\PhysicalHostName on a VM to find out the name of the host it was running on, and this is hand
-
How do you add more sound effects to the iMovie library
hola i was already suggested to use http://www.freesound.org/ but it dosent show up in imovie so if you know hoe to fix that that woud also be very helpful. i would prefer that the new sounds be free but i would consider a small fee. thanks you to
-
CC Won´t Work, When i open Premiere PRO It Works until i open a project and it closes with no advice
Well i am REALLY dissapointed so far, i just purchased the CC full for one year and i have not been able to use it. First it asks for ******* serials, already did all the steps in the guides you provide. Now i try to open Premiere Pro CC and it close