My iDevice is stuck while booting!

My iPod touch 2g is stuck while booting, I have tried used the buttons to put it into DFU and out again. Does anyone here know how to get it unstuck? (other than restoring it)

If resetting by holding the sleep and home button for 10sec until the Apple logo comes back again does not work, restoring would be the only other step.
iOS: Not responding or does not turn on

Similar Messages

  • Stuck while booting in single user mode. How to go back?

    Guys. I'd appreciate your advice very much - this concerns my main system. 
    MacBook 3,1 with OSX 10.5.? (latest)
    Did: activate single user boot in Onyx; reboot
    Problem: stuck at boot (apple logo & spinning wheel  on gray background for 2hours+). Persistent across reboots. 
    No different results for this key combinations: cmd-opt-p-r, power button for 5 sec whilst without battery/cable, cmd-s, C (possibly not recognized due to firmware password) Power button held down from switch-on moment makes the light flash a few times, produces a beep but no improvement. 
    Interestingly pressing alt lets me choose the os (HD or Leopard install disc) but gets stuck the same way regardless. It boots into Ubuntu tho. 
    I have a TIme Machine disk that I can restore from, and can read from the internal Leopard HD while in Ubuntu.
    So, please: how do I get it to boot? I'd set the nvram bootargs="" but from where...
         

    Sorry, don't know how you'd recover from the apparent limbo you're in, but this would agree with the explanation you already hit upon.
    http://support.apple.com/kb/HT1352
    Features of Open Firmware Password Protection
    Intel-based Mac computers Power PC Intel
    Blocks the ability to use the "C" key to start up from an optical disc.
    Blocks the ability to use the "D" key to start up from the Diagnostic volume of the Install DVD.
    Blocks the ability to use the "N" key to start up from a NetBoot server.
    Blocks the ability to use the "T" key to start up in Target Disk Mode (on computers that offer this feature).
    Blocks the ability to start up in Verbose mode by pressing the Command-V key combination during startup.
    Block the ability to start up a system in Single-user mode by pressing the Command-S key combination during startup.
    Blocks a reset of Parameter RAM (PRAM) by pressing the Command-Option-P-R key combination during startup.
    Requires the password to enter commands after starting up in Open Firmware, which is done by pressing the Command-Option-O-F key combination during startup.
    Blocks the ability to start up in Safe Boot mode by pressing the Shift key during startup.
    Requires the password to use the Startup Manager, accessed by pressing the Option key during startup (see below).

  • Apple Logo Stucks while boot up song is playing

    So, since I found the problem, the music of the booting is hearing. BUT the screen is stuck with the Apple Logo and the "beach circle" frozen. Any problems with that?
    Please help !!!
    Thank you

    Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
    You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them. Disk Utility's Disk Repair is not perfect and may not find or repair all directory issues. A stronger utility may be required to finish the job.
    After that Repair Permissions.
    No need to report Permissions errors....we all get them.
    DALE

  • App Server and Process Scheduler stuck while booting

    Hi All,
    We are facing a big issue in our production instance.The application server showed down while accessing the PIA.When we tried to reboot the same it didnt start and was getting stuck after some steps..few snipets are below after the last PSSRENSRV process does not proceed further.
    exec PSSAMSRV  --A  --  -C  psappsrv.cfg  -D FNPROD  -S PSSAMSRV:
            CMDTUX_CAT:819: INFO:Process id=5584 Assume started <pipe>.
    exec PSSAMSRV  --A  --  -C  psappsrv.cfg  -D FNPROD  -S PSSAMSRV:
            CMDTUX_CAT:819: INFO:Process id=5600 Assume started <pipe>.
    exec PSSAMSRV  --A  --  -C  psappsrv.cfg  -D FNPROD  -S PSSAMSRV:
            CMDTUX_CAT:819: INFO:Process id=5616 Assume started <pipe>.
    exec PSSAMSRV  --A  --  -C  psappsrv.cfg  -D FNPROD  -S PSSAMSRV:
            CMDTUX_CAT:819: INFO:Process id=5632 Assume started <pipe>.
    exec PSSAMSRV  --A  --  -C  psappsrv.cfg  -D FNPROD  -S PSSAMSRV:
            CMDTUX_CAT:819: INFO:Process id=5648 Assume started <pipe>.
    exec PSSAMSRV  --A  --  -C  psappsrv.cfg  -D FNPROD  -S PSSAMSRV:
            CMDTUX_CAT:819: INFO:Process id=5664 Assume started <pipe>.
    exec PSRENSRV  --A  --   -C  psappsrv.cfg  -D FNPROD  -S PSRENSRV:The tuxedo,appserv and renserv logs shows,
    renserv log
    ----- Begin booting PSRENSRV -------------------------
    0.5608 [14/Jul/2011 07:51:54](ERROR) CRenTuxSvcMgr::ReqBootParameters - Tux service call failed.
    ----- Begin booting PSRENSRV -------------------------
    0.5056 [14/Jul/2011 07:58:47](ERROR) CRenTuxSvcMgr::ReqBootParameters - Tux service call failed.
    ----- Begin booting PSRENSRV -------------------------
    0.780 [14/Jul/2011 08:21:04](ERROR) CRenTuxSvcMgr::ReqBootParameters - Tux service call failed.------------------------------------------------------------------------------------------
    tuxedo log
    receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
    082104.UKLO2K3S55!JSH.5060.5084.-2: JOLT_CAT:1107: "ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV"
    082104.UKLO2K3S55!WSH.4364.1752.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
    082104.UKLO2K3S55!WSH.4472.4416.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
    082104.UKLO2K3S55!WSH.1684.4128.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
    082104.UKLO2K3S55!WSH.4256.4172.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
    082104.UKLO2K3S55!JSH.4876.496.-2: JOLT_CAT:1107: "ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV"
    082104.UKLO2K3S55!WSH.4896.4284.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
    082104.UKLO2K3S55!JSH.4800.1036.-2: JOLT_CAT:1107: "ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV"
    082104.UKLO2K3S55!WSL.3904.4032.0: LIBTUX_CAT:703: ERROR: Cannot get statistics on message queue 43
    082104.UKLO2K3S55!JSL.4316.4024.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
    082104.UKLO2K3S55!WSL.3904.4032.0: WSNAT_CAT:1197: INFO: Exiting system
    082104.UKLO2K3S55!JREPSVR.5768.5800.0: LIBTUX_CAT:271: ERROR: System lock semop failure, key = 61480 (errno = 22)
    082104.UKLO2K3S55!WSL.3904.4032.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
    082104.UKLO2K3S55!JSL.4316.4024.0: JOLT_CAT:1197: "INFO: Exiting system"
    082104.UKLO2K3S55!JREPSVR.5768.5800.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
    082104.UKLO2K3S55!JSL.4316.4024.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
    082105.UKLO2K3S55!PSWATCHSRV.6124.568.-2: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=2,buf=9580216,bytes=4572,type=-1073741824,flag=2048
    082105.UKLO2K3S55!PSWATCHSRV.6124.568.-2: LIBTUX_CAT:268: ERROR: Failed to stop serving------------------------------------------------------------------------------------------
    app serv log
    PSADMIN.4944 (0) [07/14/11 07:48:28](0) Begin boot attempt on domain FNPROD
    PSWATCHSRV.4720 (0) [07/14/11 07:48:33] Starting
    PSADMIN.4944 (0) [07/14/11 07:52:29](0) End boot attempt on domain FNPROD
    PSADMIN.4944 (0) [07/14/11 07:55:46](0) Begin boot attempt on domain FNPROD
    PSWATCHSRV.1412 (0) [07/14/11 07:55:50] Starting
    PSADMIN.4892 (0) [07/14/11 08:08:07](0) Begin boot attempt on domain FNPROD
    PSWATCHSRV.5032 (0) [07/14/11 08:08:13] Starting
    PSADMIN.4892 (0) [07/14/11 08:08:27](0) End boot attempt on domain FNPROD
    PSADMIN.6104 (0) [07/14/11 08:20:28](0) Begin boot attempt on domain FNPROD
    PSWATCHSRV.6124 (0) [07/14/11 08:20:32] Starting-----------------------------------------------------------------------------------------
    tuxedo log
    213815.UKLO2K3S55!PSSAMSRV.6072.6040.0: LIBTUX_CAT:262: INFO: Standard main starting
    213815.UKLO2K3S55!PSRENSRV.2440.2444.-2: 07-13-2011: Tuxedo Version 8.1 32-bit Windows.
    213815.UKLO2K3S55!PSRENSRV.2440.2444.-2: LIBTUX_CAT:262: INFO: Standard main starting
    214434.UKLO2K3S55!BBL.5964.4464.0: ERROR: msgrcv err(LIBTUX_CAT:666: ERROR: Message operation failed because the queue was removed): errno=100,qid=257,buf=10285048,bytes=4572,type=-1073741824,flag=0
    214434.UKLO2K3S55!PSRENSRV.2440.2444.-2: ERROR: msgrcv err(LIBTUX_CAT:666: ERROR: Message operation failed because the queue was removed): errno=100,qid=277,buf=11551960,bytes=8668,type=805306369,flag=0
    214434.UKLO2K3S55!BBL.5964.4464.0: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=257,buf=10285048,bytes=4572,type=0,flag=0
    214434.UKLO2K3S55!BBL.5964.4464.0: LIBTUX_CAT:271: ERROR: System lock semop failure, key = 33242 (errno = 22)
    214434.UKLO2K3S55!BBL.5964.4464.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
    214434.UKLO2K3S55!BBL.5964.4464.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
    214434.UKLO2K3S55!PSWATCHSRV.5208.4528.-2: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=258,buf=9654368,bytes=27996,type=-1073741824,flag=2048
    214434.UKLO2K3S55!PSWATCHSRV.5208.4528.-2: LIBTUX_CAT:268: ERROR: Failed to stop serving
    214507.UKLO2K3S55!tmboot.4616.5152.-2: 07-13-2011: Tuxedo Version 8.1 32-bit Windows.
    214507.UKLO2K3S55!tmboot.4616.5152.-2: TUXNT_CAT:4: ERROR: Cannot access ipc server (The system cannot find the file specified.
    214507.UKLO2K3S55!tmboot.4616.5152.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
    214508.UKLO2K3S55!PSADMIN.868: End boot attempt on domain FNPRODAlso the process scheduler was not getting booted the logs are shown below,
    scheduler log
    085646.UKLO2K3S55!restartsrv.2484.4116.-2: server BASE/101: CMDTUX_CAT:587: INFO: Cannot restart server, scheduling for cleanup
    085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:550: WARN: Cleaning up restartable server BASE/101
    085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 4300 died; removing from BB
    085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 5372 died; removing from BB
    085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 5640 died; removing from BB
    085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 5768 died; removing from BB
    085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: 07-14-2011: Tuxedo Version 8.1 32-bit Windows.
    085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: GP_CAT:1077: ERROR: Unable to open environment file E:\Psoft\PRDAPP\appserv\prcs\FNPROD\psprcsrv.env for reading
    085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: LIBTUX_CAT:353: ERROR: Error putting ENVFILE E:\Psoft\PRDAPP\appserv\prcs\FNPROD\psprcsrv.env into environment
    085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: server BASE/101: CMDTUX_CAT:551: INFO: server removed
    085743.UKLO2K3S55!BBL.4044.5996.0: ERROR: msgrcv err(LIBTUX_CAT:666: ERROR: Message operation failed because the queue was removed): errno=100,qid=80,buf=10304328,bytes=4572,type=-1073741824,flag=0
    085743.UKLO2K3S55!BBL.4044.5996.0: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=80,buf=10304328,bytes=4572,type=-1073741824,flag=0
    085743.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:271: ERROR: System lock semop failure, key = 64479 (errno = 22)
    085743.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
    085743.UKLO2K3S55!BBL.4044.5996.0: CMDTUX_CAT:26: INFO: The BBL is exiting systemIs this a problem with Tuxedo if so what has to be done...Pls help its a bit urgent...
    Thanks in advance...

    First of all; if a problem is urgent then you should always contact Oracle support instead.
    It looks like the domain is corrupt within Tuxedo. You could try to reconfigure the domain so that it will get recreated in Tuxedo. Make sure you have a backup before you do this. To reconfigure the domain simply open a CMD box and type the following command (from the appserver directory):
    psadmin -c configure -d "DOMAIN_NAME"
    You can only use this command for the application server.

  • Apple Logo Stuck While Booting (Macbook Pro 15 (Late 2007)

    As I have installed Mac OS X 10.7.2, I tried to put it on my computer on the Macbook Pro 15 (Late 2007) I tried everything to make it work. It just still shows with a Apple logo with the "beach circle" on it. Once i turn it on, I just know that the software went in but It does not show the screen about it.
    Please help if you can.
    I want this to work

    oo close. but no.
    Once you download the recovery disk assistant, doublt click it and it'll open up an installer. This installer will ask you where you want to install the RDAssistant. Make sure you choose your USB drive not your hard drive. Name the usb drive before doing this if it is unclear which is which.
    something like "MyUSBdrive" or "LionRecoveryA".
    And then proceed to install it on the usb.
    Once you have done that you will plug it into the computer that you can't get into and run the usb through that. To get to the usb recovery partition, you'll have to hold option down to get to the drive.
    if this doesn't work, go to an apple specialist (apple store) who can assist you directly.

  • Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...

    Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...

    It looks like ocz is aware of the issue and trying to address it via firmware:
    http://www.ocztechnologyforum.com/forum/showthread.php?103700-Mountain-Lion-and- OCZ-Octane-Petrol-and-Octane-S2-SSD-s
    It's a shame because apple is clearly the party that changed something.

  • S930 stuck at Lenovo screen while boot up.

    My S930 stuck at lenovo screen while boot up.
    I tried to leave the phone while waiting for it to boot until the battery drain out.
    Then charged till full , try to boot again and it still stuck at the same lenovo screen..
    What to do? How to reset / factory default ?
    Please help. TQ

    Issue :- G500 Lenovo laptop screen gets stuck at lenovo screen and does not allow to do any thing alternatively need to power off laptop.
    I am also having this same problem occasionally. In that case if my screen stuck at lenovo screen then I turn off my laptop, After while when I turn it on then problem go off. But today same method did not help me, finally I removed  my batter for a while then plugged it again which again resolved the issue.
    I purchased my G500 lenovo laptop 4 or 5 months ago , it had been working fine for first 3 months but after it I encountered with this probelm.
    I updated my bios with latest available version but that also not helped me
    My concern is that why this problem is occuring occasionally. Request you to share valuable steps and guide us to get rid off from this problem.
    Thanks and Regards
    Ashok Dewan

  • Macbook pro stuck boots to "no bootable device found insert boot disk and press any key macbook," and at the same time, booting to the Startup Manager (holding option while booting) will not work either.

    Not only will holding Option while booting not work, but all of the other boot tricks (safe mode, single user mode, etc), will not work. I am at a loss. I also don't have an optical drive in this particular MBP. I have an SSD where it once was.

    I know you have tried other booting types, but have you tried booting into recovery mode? Cmd+R or internet recovery? By any chance have you recently deleted/resized/changed format to a partition? Even if it was not the main one? Have you installed third party applications that could have messed up your system files? Or some sort of RAID software, Fusion Drive etc.? All of this info will help us to pinpoint your issue quicker and help you. Any change you noticed before this happened (even if it seems small), that you consider worth telling us would be greatly appreciated.
    Also, do you have access to another Mac besides this one(preferably)? Or do you have access to a Windows computer (7 or 8 preferably)?
    Do you hear the chime before the message appears?

  • My Black Berry Z10 is not starting- Stuck at logo while booting..

    My mobile BBZ10 STL-100 is stuk at logo while booting. Its not completing the process to open/on the mobile.
    Is there any way to fix this issue?
    Can any of you help me, how to resolve this issue.
    Thanks in Advance.

    You can try loading the OS again, using
    Upgrading OS10 devices using Autoloader
    You will need to know the exact model STL100-x , found on the white sticker under your battery.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Disk Utility broken while booted from Installation CDs??

    Situation: I have a Macbook Pro with a 120 GB HDD. I had partitioned it into two partitions, and later desired that I should have only one partition on the drive. I booted the Mac OS X installation CDs and attempted the following three-step procedure:
    1. Use Disk Utility to image my system partition into a file on an external USB drive
    2. Verify the image and repartition ("Erase") my laptop's internal HDD
    3. Restore the disk image from the external HDD to the laptop's HDD.
    I made it to step 3 without issue. So currently I have one unbootable Macbook Pro, an 85 GB image of a system partition on a USB HDD, and a perfectly bootable Intel Mac Mini from which I'm writing this post.
    Problem: Disk Utility doesn't seem to be able to restore images when booted from the Installation CDs. On the 'Restore' tab there are two fields you must fill in, a 'source' field and a 'destination' field. The source field has a button where you can summon a very helpful file-picker, and it pulls up my disk image from my USB drive just fine. However, the destination field can only be filled in by clicking and dragging a drive from the left panel in Disk Utility.
    However, it seems impossible to do this while booted from the Installation CDs. When I attempt to click and drag a disk from the left panel list, all I end up accomplishing is selecting multiple items from the list. To make a visual illustration:
    Instead of this, like I get when I try it on my mac mini booted normally:
    http://upload.pbase.com/silentplummet/image/72221384.jpg
    ...I get this, which is a photo of my macbook pro booted from the installation CDs:
    http://upload.pbase.com/silentplummet/image/72221397.jpg
    There doesn't seem to be any way to actually select a destination drive. If I had to hypothesize, I would guess that the GUI is crippled when you boot from CD and click+drag is deactivated. But that appears to make it impossible to restore images since the only way to select destination drives is by clicking and dragging.
    Now I am a college student; I'm not really losing revenue or anything over this, but this is an awful oversight on Apple's part and I am stuck on what to do about it. There is no documentation that says "Restore functionality is crippled in Disk Utility when booting from installation CDs." Here are the steps I have tried for an alternate solution:
    -Commandline diskutil. Unfortunately Apple has crippled it and there appears to be no imaging functionality whatsoever.
    -Mount the image manually and cp the files back over. Unfortunately I can't make it preserve permissions. I passed the right options to cp but it just won't do what it's supposed to. I tried copying it anyway and using Disk Utility to repair the permissions, but it still wouldn't boot.
    -Call Applecare. The support rep was kind and helpful but couldn't offer a solution. The higher-ups fed me some BS about not supporting third party applications, well, I hardly think Disk Utility constitutes a third party application.
    My next step is to boot the MBP in target disk mode and use my mac mini to restore the image to the MBP HDD, but I have to buy a firewire cable for that and I don't really want to.
    Seeking: acknowledgement that Disk Utility is broken and Apple *****, or otherwise immediate solutions to restore the image to my HDD that do not constitute monetary expenditures on my part.
    Macbook Pro 15" 2.0 GHz Mac mini 1.5   Mac OS X (10.4.6)  

    Others have (in the Mac Pro forum) noticed this bug in Disk Utility on the Intel version install disks. Your easiest fix would be to reinstall OSX on you Macbook disk, boot it, mount the disk image from the USB drive, and use the Migration Assistant to copy over all your accounts and data files.

  • Macbook Pro 13 inch stuck while turning ON and heat up

    Hi,
    My MBP 13 inch (Snow Leaopard 10.6.8) is stuck at start upp with grey apple logo (no spinning gear). I think this problem started after I tried to turn ON my MBP with an external dongle connected to USB port (I didnt notice it is connected). While trying so it didnt boot (was stuck with grey apple logo), I turned it OFF, removed the dongle and turned ON again, it worked this time. After that session every time I turn it ON it stucks with the grey apple logo (no spinning gear). I tried following,
    1- Using original OSX DVD disk utility I reset permissions and repair disk. Both were succesfull (As shown in that window). But MBP still stucks.
    2- PRAM reset - MBP successfully boots and works but some times its slow and get stucked while I am working.
    3- Reinstall OSX from DVD without erasing the disk and update to snow leopard 10.6.8 using combo update from apple- problem persisted
    4- Back up all files and erase the disk and reinstall OSX from dvd and update to snow leopard 10.6.8 using combo update from apple. still problem persist.
    Also I have noticed that the MBP heats up rapidly. This was never an issue before. I noticed this after it started to stuck.
    Any suggestions to solve this issue? Please note I use my MBP only for browsing internet only about 1 - 4 hours a day.
    Thanks.

    yea man you need  to take it to the Apple store ASAP. This is why I bought the Apple Care warranty when I bought my Macbook pro. At the Apple store they will trouble shot your problem and if it cant be fixed you may end up with a new lappy toppy good luck my friend, hope everything goes good, and your partner isn't to badly damaged

  • My HP Pavailion 15-n020tu Stuck at Booting in Windows 8.1 Pro when I enable Hyper-V?

    Hi,
    I'm using HP Pavailion 15-n020tu Stuck at Booting in Windows 8.1 Pro when I enable Hyper-V. And I have to enable Hyper-V to test my Windows Phone Apps in MS Visual Studio? Mty friend Dell Laptop does not facing this problem with same configuration which I have. Then why me are facing this problem?
    Help Me?
     I tried on Windows 8 Pro but again same problem. 
    So many things I tried updating Windows, Updating drivers but failed.

    Hello @Vikas_Kumawat80,
    Welcome to the HP Forums, I hope you enjoy your experience! 
    I understand that you are looking to enable Virtualization on your notebook computer, and I would be happy to be of assistance!
    While I do not have any experience with Virtualization, I do recommend taking a look at this resource on How to Enable and Use Client Hyper-V, as well as Run virtual machines on Windows 8.1 with Client Hyper‑V. I am not certain if this processor has hardware virtualization support, it appears that Windows 8.1 pro and enterprise may have built in capabilities.
    If you require further assistance on this, you might have to contact Microsoft on the topic.
    I hope this helps!
    Best Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Strange message while booting up.

    I get this message while booting and am wondering if anyone knows how to correct the problem.
    Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
    I haven't found any solutions or much explanation of what it is using google.

    When I read the message I felt brave enough to try installing this mysterious tomoyo-tools, system boots fine like I didn't have it and it's happened about for a week. I forgot to have installed that.
    Today my machine have had strange message and didn't boot, I've tried the fallback and the first time has worked. From fallback I have reinstalled tomoyo-tools, thinking some upgrade could have broken the package.
    Well, reboot the machine and system still not booting, neither fallback this time. WTH!
    I've used the livecd to move the binary /sbin/tomoyo-init (yes of course I can chroot and pacman -R but moving the binary was enough), booting correctly and pacman -R it.
    The last message written was about kernel start etc, and the system stuck.

  • Zen stuck while rebuilding

    i have a creative zen (only )
    S/N is MAPF262 807M 0085 7H The model no is R33022 DVP-FL000
    .the player is stuck while rebuilding,
    i went to recovery mode,
    performed cleanup where the disk was scanned to 00% and the player froze
    then i formatted it ,it got formatted
    but when i select reboot it goes back to the rebuilding screen
    ,even reload firmware works but the computer displays a message stating that the firmware upgrade has failed
    please help!!!!

    abhay289 wrote:
    it came out of rebuilding yesterday morning after i formatted it once and booted up but all my data was gone....
    When you format the player, all the contents will be deleted. There's really a hardware problem with the player and the only way to fix it is to send the unit for repair. Try contacting support on the link I provided above.

  • Stuck at boot up

    Mac mini is stuck at boot up.  What to do?

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk.
    If that doesn't help Reinstall the OS.

Maybe you are looking for