My Idevices are getting an IP address that is similar to Verizon Actiontec router, however I'm using Airport is primary router? Why?

I have my airport time capsule as primary router hooked up by ethernet from ONT from Verizon.  My Verizon Actiontec router is hooked up to APtime capsule via LAN for DVR and TV guide. It works, however my Idevices will get a different IP address 192.168.1 from time to time and not be able to access the internet.  I fix this by renewing my lease then the device goes back to the IP 10.0.0.1 like it should.  My question is why does this happen? How do I prevent it?
Thank You in Advance.

Hi alfredlino,
If you are seeing 2 different ranges of IP addresses, you might be in a double NAT situation as described in this article:
Back to My Mac: "Double NAT" configurations may prevent Back to My Mac connections
http://support.apple.com/kb/TS1208
Even if you are not using Back to My Mac, the article still remains valid:
Additional Information
How to tell if you are using "double NAT"
While every network setup is different, here is a simple way to tell if your computer is on a "double NAT" network:
In Finder, from the Go menu, choose Utilities.
Open Network Utility.
Click Traceroute.
In the field, enter "www.mac.com".
Click Trace.
After starting the trace, look for the line beginning with the number 2. If the address in that line is any IP address in either of the following ranges:
10.x.x.x
192.168.x.x
... then your network has multiple layers of NAT.
The Resolution instructions in that article should help resolve this for you.
Cheers!
- Ari

Similar Messages

  • I keep getting an error message that reads "to update application sign into the account you used to purchase it"   I am trying to download Final Cut Pro X 10.0.9  I am signed in with the account that I purchased Final cut Pro X   I don't have another acco

    I keep getting an error message that reads "to update application sign into the account you used to purchase it"
    I am trying to download Final Cut Pro X 10.0.9
    I am signed in with the account that I purchased Final cut Pro X
    I don't have another account I'm not sure what's going on

    Welcome to Apple Support Communities
    Open the Mac App Store and go to Purchases. Do you see Final Cut Pro X listed?
    If so, open a Finder window, choose Applications in the sidebar and delete Final Cut Pro X. Then, go to the Mac App Store and download Final Cut Pro X for free.
    If you don't see it in Purchases, see if it's hidden, and if so, unhide it > http://support.apple.com/kb/HT4928 If it doesn't work, contact with the Mac App Store support > http://www.apple.com/support/mac/app-store/contact

  • Opening iphoto I get an error message that says "you can't open your current photo library using this version of iphoto.  You have made changes to your photo library using a newer version of iphoto.  Please quit and use the latest version of iphoto.

    Opening iphoto I get an error message that says "you can't open your current photo library using this version of iphoto.  You have made changes to your photo library using a newer version of iphoto.  Please quit and use the latest version of iphoto."  I wouldn't have a clue as to how to change to a new version of iphoto even if I wanted to. 

    If you don't have a backup you can resort to give this a try:
    Starting over from scratch with new library
    Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
    1. Open the library package like this.
    2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
    3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
    This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
    Note:  your current library will be left untouched for further attempts at a fix if so desired.
    OT

  • I have an ipad 2, ios7 will not download. I keep getting an error message that just tells me ios wont install, however it does not tell me why. Any suggestions? Thanks

    I have an ipad 2, ios7 will not download. I keep getting an error message that just tells me ios wont install, however it does not tell me why. Any suggestions? Thanks

    I find the Air easier to work with if I need a keyboard if, for no other reason, that's more compact to carry around than the iPad and a keyboard, even one that is part of an iPad case.  I also often have to access data from one application when using another, and iOS is not at its best when having to do rapid application switching (Command-Tab switching is a lot faster than the double press home, scroll the icons at the bottom and swap).
    As well, for editing I find the lack of sandboxing on OSX allows for efficiency enhancing utilities across applications, something you don't get in iOS.  I understand the reason for that, but while more secure it also creates issues of its own in terms of usability in a number of situations.
    I prefer the iPad for totally single application focused situations where little or no input is required.  I use my iPad to hold copies of manuals when I'm doing a full day continuing education presentation for CPAs.  A MacBook Aire can't really fill in very easily for that usage.
    I see them each as tools appropriate for different jobs.

  • I am getting a 'MIDI timeout' error message when I open garageband. I am not using any other apps so why is this happening. Restarting does not solve the issue.

    I am getting a 'MIDI timeout' error message when I open garageband. I am not using any other apps so why is this happening. Restarting does not solve the issue.

    I should also add that I am using core audio, no external MIDI device and Garageband v 6.0.5. Thanks

  • I have one contact that i have been texting for months. About 5 hours ago, when I send a text I get an error message that the text couldnt be sent.  However, when I send a picture with a text message, then it goes through to the contact.  Why am I getting

    I have one contact that I've been texting for months,  about 5 hours ago, I started receiving an error that the text was not sent.  However, if I text a picture and then text with the picture the message goes through.  Why am I getting this error?

    You can also try out few things >
    1) check if the ipod constantly appears in mycomputer section .
    - if it does try changing the drive letter of the ipod and try to format the ipod drive(Right click format)
    2) if its not comin up in mycomputer then.. there has to be problem with the USB drivers in your computer
    you can try
    http://docs.info.apple.com/article.html?artnum=304508
    The best way to check whether the ipod is faulty or the computer is creating the problem is,
    connect the ipod to a different computer which has itunes on it(If possible)

  • We are getting a pop up that says we need to install flash player plug in. we tried everything, nothing works

    we can't play any games. it says we need to install additional plug in, for flash player. when we attempt to install, it says we already have the newest version installed. but nothing works. can not find the install anywhere. we had a computer person working on it and she could not figure it out. she tried everything. Do we need to uninstall firefox and reinstall it?

    Could you review your plugins list and see which (if any) Adobe/Shockwave plugins you have now:
    orange Firefox button (or Tools menu) > Add-ons > Plugins category
    When you go to the following download page and choose "Flash Player 11 for Other browsers" and download the installer, what is the actual name of the file that gets saved?
    http://get.adobe.com/flashplayer/otherversions/
    Mine's called "install_flashplayer11x32_mssd_aih.exe"
    Occasionally software installs are not completed until you restart Windows. You might want to try that at some point if you haven't already.
    Adobe has a cleanup tool described in this article where you can scrub out all Flash versions and start again. [[Flash Plugin - Keep it up to date and troubleshoot problems]]
    I do not recommend uninstalling Firefox.
    You can refresh your Firefox installation or update to Firefox 20 by running the Firefox installer. You do not need to remove the old version first. You can get that download here:
    https://www.mozilla.org/en-US/firefox/fx/#desktop

  • I send emial with links and anchors and when someone else forwards that, the links are converted to http addresses that go to gmail!

    I send out an email with many "internal" links, that is, links that go to anchors within the email. someone else picks up the email and forwards it to others. Now, instead of looking like this:
    #GHNNCEP
    the link looks like this:
    https://mail.google.com/mail/u/0/#14c1630a55126b2f_GHNNCEP
    and of course does not work as intended.
    Huh?
    Thx.

    I need to refer to sections within the email, not external links. I thought anchors was the way to go for that. Have you something different?
    Thx.

  • When trying to download & install Firefox 5.0.1 into a Mac, I get a message saying that Firefox cannot be installed because libnsscksi.dylib is in use. Any idea how to locate and close that file? Finder does not recognize it. Thanks!

    Tried to install both Firefox 5.0 and 5.0.1, and received the same error message that a file ending in .dylib was in use. I cannot locate that file, and Finder does not recognize it.

    I have a Power PC Mac with OS 10.5.8 and Firefox 3.6.28, the latest versions supported on my machine, and all of my plug-ins are the latest versions available for that browser version. I too get the warning message all the time and it is very annoying. I have never had any "security" problems, and I don't go along with this imperative to always be upgrading equipment. Don't these corporate geeks understand that we're in a global economic contraction and a lot of us are unemployed/underemployed? They want us to be good consumers and "switch to a newer computer" but I can't afford that. Like, if I can't fix my old car, I won't be able to drive. What I want to know is: '''how to disable the warning message?''' Thank you in advance.

  • TS1398 My iPhone 4 is connected to wi-fi when i am home, but when i leave, i do not get any of my whatssapp messages. When i get back home again I get all the messages that has been send through the day. We do have 3G on network. Why is this?

    MY iPhone4 is connected to wi-fi, and all is fine at home. When i leave home, i do not get any of my whatsapp messages. When i return home, i get all the messages than was send during the day. Why does my phone not use the cellular network to get my whatsapp messages as my Nokia N8 did?
    This is my first iPhone, so i am having some troubles setting everything up!

    Please make sure that you are connected to the internet. There sould be a "3G or LTE or 4G or E symbol on the top left corner of the screen, if data is available to you.
    Whatsapp uses data services to send and receive messages. You need to be connected to the internet for that.

  • I'm trying to buy something out of the App Store and I forgot my answers to my security questions so I went to reset the security questions and the email address that's saved as a secondary email I no longer use how would I reset my security questions?

    I need help trying to figure out how to reset my email address so that I can reset my security questions.

    Mslauderdale wrote:
    I need help trying to figure out how to reset my email address so that I can reset my security questions.
    1)  Apple ID: All about Apple ID security questions
    2)  See Here... ask to speak with the Account Security Team...
    Apple ID: Contacting Apple for help with Apple ID account security
    Or Email Here  >  Apple  Support  iTunes Store  Contact

  • Can't Get Legit IP Address From My Cable Modem

    I have narrowed down my problem.
    I cannot coax a legit IP address from my Charter cable modem. I'm using AirPort Admin Utility to no avail.
    Everything else in the system works perfectly...I have no problem networking between computers, or tapping into a different wireless system.
    The problem is getting an IP address that works. I have tried, one at a time, an AirPort Express, AirPort Snow and, finally, an AirPort Graphite. None could get the real IP happening.
    Of course, Charter claims "software problem". Maybe it is, but I certainly don't trust them!

    hi! Have you Physically powered off the Cable Modem and powered it back on? Connect your Cable Modem's network cable to the WAN port of your Airport. Unplug the power to both the Cable Modem and the Airport Base Station.
    Plug the Power Chord into the Cable modem first, then the Power Chord to the Airport Base Station.
    See if that helps,
    AL

  • Client sync fails unless on a IP address that has a Azure IP rule setup

    I've got a WPF client that syncs to an Azure SQL Server. It works fine as long as my customers are on an IP address that I happened to use and setup a firewall rule for. When they are on any other IP address the sync fails. 
    Please help.

    Hi laremout,
    The Azure SQL Database firewall prevents all access to your Azure SQL Database server until you grant access from specific computers. Access via the SQL Azure firewall is based on the originating IP address of each request. Therefore, when performing the synchronization
    to SQL  Azure server, we need to configure specific IP addresses in the Firewall Rules to allow access to the SQL Azure server, otherwise it will fail.
    Besides, if you have an Internet connection with dynamic IP addressing, you could use one of the following solutions:
       • Ask your Internet Service Provider (ISP) for the IP address range assigned to your client computers that will access the Azure SQL Database server, and then add the IP address range as a firewall rule.
       • Get static IP addressing instead for your client computers, and then add the IP addresses as firewall rules.
    For SQL Azure issues, you can also post the question in the Azure SQL Database forum at
    https://social.msdn.microsoft.com/forums/azure/en-US/home?forum=ssdsgetstarted. It is appropriate and more experts will assist you.
    Reference:
    Azure SQL Database Firewall
    Creating a Sync Group Using SQL Azure Management Portal
    Windows Azure Data Sync with SQL Azure database hub, synchronization group and client sync agent
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

  • Can I get the IP address of my stolen iPad through find my iPad?

    Hi. My iPad was very recently stolen when my house was burglarized. I have find my iPad turned on and marked the device as lost. Earlier, the iPad was located and the general location was sent to me. Unfortunately, the person who stole it turned it back off as soon as they saw that it was remotely locked (this is a huge problem to me, as a remotely locked device shouldn't be able to be so easily switched off). I told the police where it was located, but it wasn't on long enough to give me an exact location. So, they will not issue a warrant because it could be in one of about 4-5 houses.
    Does anyone know of a way I can get the ip address that was used when the device reported it's location via find my iPad? If I have that, then we can get a warrant and get the police to look for it. It seems like this should be available, as the device was marked as lost under find my iPad. I just can't seem to find the info anywhere on the site.
    If you have any advice, please help.

    You don't need to know the remote IP if you have your PPP setup correctly. Check this site out.
    http://www.stokely.com/unix.serial.port.resources/index.html

  • My email address that was used to set up my ipod was deactivated by yahoo for inactivity...now i cant access my ipod  with that email address or password..i also dont have my reciept to show that i purchased the ipod from  the apple store either.

    I am not able to access my Ipod using the email address because it has been deactivated.

    Recovery the password and change the ID email address
    How do I change or recover a forgotten Apple ID Password?
    If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. See Changing your Apple ID password if you'd like more information.
    I no longer have an email address that was also my Apple ID. Can I still use the email address as my Apple ID?
    Apple recommends you change your Apple ID to your current, working email address. This will not create another Apple ID, it will only change it to your working email address. See Changing the name you use for your Apple ID if you'd like more information.
    If necessary:
    Forgotten Security Questions/Answers
    You need to contact Apple by:
    1 - Using this form
    Apple - Support -form iTunes Store - Contact Us
    2 - Call Apple in your country by getting the number from here:
    http://support.apple.com/kb/HE57
    3. Contact Apple by:          
    Apple ID: Contacting Apple for help with Apple ID account security
    For general  information see:
    Apple ID: All about Apple ID security questions

Maybe you are looking for

  • Is SAP ABAP suitable w.r.t. my qualification and experience ? If NOT, which would be a suitable alternative ?

    Hello SAP Cummunity, I am very much interested in take up SAP course but like everyone very much confused. Firstly let me tell a brief about myself, - I have graduated in Bachelor of Engineering (Biotechnology) - After B.E., I took up PGDM (Marketing

  • SAP-PRICING FOR FREE GOODS

    Hi all, I have a issue in AFS free goods, Order raised for 10 materials so he should get 10 materials free But this is not possible in AFS as it does not support free goods concept Second material is free of cost. Once first material is entered in th

  • I am trying to add music to my slide show and I get this error:

    I am trying to add music to my slide show and I get this error:  The selected file cannot be played because your system does not have the required compressor/decompressor (codec) installed.  I went to the Adobe site and downloaded a codec program, an

  • HT1451 All my iTunes library has disappeared in to the Cloud.

    I though it just backed it up and you could simply delete from your computere knowing that music you currently aren't interetsed in was still stored out there. It cleaned me out! I travel a lot overseas and don't connect to the net all the time so th

  • Final Items Would like to Modify...

    Hi, Here are a few items I'd like to iron out for this site design... 1) CURIOUSITY: The sign up box, I chose the 'center' alignment within the CSS panel so that the text would be centered within that box...however, when I uploaded, I found that the