My ig3s volume will not maximise and phone switiches itself off

My i3gs volume control will not maximise and the phone switches itself mid call. Any ideas?

I like your answer, and normally I never power my phone off.  But it seems like I was having battery issues yesterday (percentage dropping pretty quickly for not even using phone or running apps or data).  So I wanted to power the phone off.  It's also supposed to charge the battery faster when the phone is powered off.  That's the only reason. 
Still hoping for more answers or suggestions before I have to place a call to Apple.

Similar Messages

  • I have a partition on my IMac disk and Windows 7 loaded on one partition.  I tried to open and W7 will not open and cannot repair itself.  Is there a diagnostic/disk repair from Apple that I can try before reloading W7?

    I have a partition on my IMac disk and Windows 7 loaded on one partition.  I tried to open and W7 will not open and cannot repair itself.  Is there a diagnostic/disk repair from Apple that I can try before reloading W7?

    Csound1 What Ive been trying to explain is that I have been running bootcamp, I open the app where the first screen is the introduction, i hit continue, the first time I select "download the latest windows support software fromm Apple" then I return and instead select "Install Windows 7." Then hit continue. The third screen is where I "Create a Partition for Windows" I set Windows to 80 gigs then hit INSTALL. As stated before Bootcamp cannot find the install drivers saying "The installer disc could not be found." My windows software is on a USB drive not a disc, I tried using a virtual disc reader to make it appear that the windows software was running on a disc, still no luck. What I would like to know is how to install windows on bootcamp.

  • Insomnia (phone will not sleep and cannot be switched off)

    I have had problems after trying out the Z2 mag charging dock, my phone keeps waking the screen when it is being charged (the screen timeouts and turns off before being turned back on again after a few seconds, showing the lock screen), even after i switch back to the standard USB charging cable (charging directly to the microusb port). I have checked developer options and keep screen awake when charging is not ticked so that's not the problem.
    Additionally, my phone is not able to be switched off. When i switch off, it will enter into a sort of bootloop where the phone will spontaneously turn itself on showing 'Sony' screen > black screen and it repeats this cycle. The phone can however be turned back on during this bootloop if i i press and hold the power button while the screen is black.
    I have scanned the phone using various reputable antivirus apps and none of them have turned up anything. Did a factory reset but it didn't solve either problem.
    Appreciate any help I can get.

    Hi, I know its been a while since you posted this issue, but was wondering if you have got it solved and if yes how you did it.
    I have run into excactly the same problem yesterday after accidentaly connecting magnetic charging cable the wrong way.
    The phone went instantly dead (battery discharge), after that Red Light came on and starting blinking when on wall charger.
    I left it on charger for 4 hours and was able to get it restarted. Now whenever I put it on charger the screen will not sleep. It will dim and turn off but straight away turn on again. I have run PC Companion twice to repair but it is still doing the same thing over and over again. I also have the issue that I cant switch it off as it will go into a Sony Logo Bootloop. I have to force shut down and then I can charge it without problem. Once I remove phone from charger it will go into Sony Logo Bootloop again until switched on.
    Any ideas??

  • Iphoto will not open and i cant import off camera or anything...iphoto isnt working at all

    i went to access my iphoto on my mac and there are no photo's or anything, it will not open, so i tried to upload from my camera and it wont do that either, does anyone have any idea's where or what could of happened to my pictures..

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Just updated I-Phone 4 and volume will not work

    Just updated I-Phone 4 to OS6 now my volume will not work.

    Firefox 4 requires at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/4.0/system-requirements/
    For an unofficial Firefox 4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
    * http://www.floodgap.com/software/tenfourfox/
    Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    * http://kb.mozillazine.org/Lost_bookmarks

  • My music will not play after it gets to a certain volume. It works fine if i turn it up loudly however when i turn it down past a point it will not work and the music wont play.

    My music will not play after it gets to a certain volume. It works fine if i turn it up loudly however when i turn it down past a point it will not work and the music wont play.

    If in settings, music, volume limit is off then restart your phone first. Hold the home and off button down until the apple symbol comes up.

  • My iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black

    my iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black. can anyone help me please??

    christobell86 wrote:
    ... it will not restore my phone as i have got the app find my iphone switched on.
    You can access iCloud.com on a computer to turn it off.
    http://support.apple.com/kb/PH2702

  • I have a Sony radio in my car.   With IOS  4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio.  After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .  Any t

    I have a Sony radio in my car.   With IOS  4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio.  After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .  Any thoughts.

    I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?

  • My iphone is stuck in recovery mode and itunes will not recognize my phone. I've tried pretty much every trick i can and i still do not know what to do. Someone please help me

    My iphone is stuck in recovery mode and itunes will not recognize my phone. I've tried pretty much every trick i can and i still do not know what to do. Someone please help me

    I've done all of these, even trying a different USB port, and still, nothing. This is really confusing. Windows 8.1 said something to do with USB malfunction or something and nothing works. I need to restore my iPhone quickly and nothing has happened. My cable is not genuine Apple product. iTunes makes the noise that it makes when I connect the device, but it doesn't say 'iPhone is in recovery mode' or even say 'iPhone' in the corner. I am really fed up and would really appreciate a response.
    Thanks,
    Nathan.

  • My IPhone is set up with an internet  downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro  within the phone. My computer will not accept the phone because they say it's a "Developer?"

    My IPhone is set up with an internet  downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro  within the phone. My computer will not accept the phone because they say it's a "Developer?" Help. I cannot not even get passed the activation step on the computer or phone because it will not activate the device.

    Hello buddyacw
    You would have to restore the iPhone. Download the latest version of iTunes and then follow the steps in the article below to get it working again.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I installed itunes 10.5 and now it will not recognize my phone-

    I installed itunes 10.5 last week and now when I plug in my iPhone it will not recognize it.  I've gone through all the recommended troubleshooting through Apple's site but it seems to make my computer worse.  I re-installed itunes 3 times and it still will not find my phone when I plug it in.  When I go to my device manager my "Apply Mobile Device USB Driver" has the little Yellow Triangle with the exclamation point it in- I checked for and updated driver but it says I have the most current one.  I am running Windows Vista and itunes was working fine before I took the upgrade.  Any help is appreciated!
    Thanks!

    I spent last week looking for a solution to that little yellow "!" needle haystack....
    It is probably buried where nothing can touch or change it other than what I resorted to and would have saved time, clean install after I made sure to have two backup sets: Windows Easy Transfer plus Paragon clone OS and partitions to drive. Had to spend a full day reinstalling, updates, etc. Careful not to bring back any prefs or data that might be corrupt or wrong.
    10.5 and iOS 5 on new iPod 4G works much better though and as they should and no issues like I had with AMS or other services or needing to restart first before launching iTunes.

  • Phone will not ring and goes to voicemail

    My phone will not ring and always go straight to voicemail.  I have rebooted, updated, etc but still have this problem.  Anyone have a solution???

    Contact your phone carrier.

  • I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

    I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. 
    There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My iphone4 when connected to any computer will not charge and is constantly connected and disconnected.  does the same with itunes.  Also i'm talking on the phone and all of a sudden the other person can not hear me.

    My iphone4 when connected to any computer will not charge and is constantly connecting and disconnecting.  It does the same with itunes so it doesnt really sync.  Also when talking to someone, all of a sudden they cant hear me.

    I'm having the same issue. I went to my local apple store and they could not work me into the genius bar so i made an appointment for tomorrow morning. The clerk did check the phone for the pink indicators at the top and bottom of the phone (where you plug in your USB or headphones) He said if you can see a pink indicator dot you may have gotten it wet, or had some sort of condensation in it, which could cause the plugs to not work.
    In regards to people not being able to hear you, i'm waiting for my appointment tomorrow for more news! I would recommend taking it into your local apple store for more answers.

  • Had an update error now itunes will not recognise my phone and it is frozen

    I tried to update my iphone 3g tonight and it encountered an error. Now itunes will not recognise the phone and it is frozen on a screen telling me to connect it to itunes. I have turned it on and off and it remains stuck. I have restarted my computer and itunes and no change.

    Hey- just went through something similar - and I'm sorry I don't have the perfect answer... bc mine did what you are saying except my itunes did recognize that "an iphone" was connected and so it suggested that I do a recovery-mode restore on it and then I did a back up restore via itunes to get my most recent back up transferred to my iphone, and then it finally listed my phone as "xxx's iphone" in itunes.... here's the link I used: http://www.copytrans.net/blog/how-to-restore-iphone-after-updating-to-ios-7/  and I also used: http://support.apple.com/kb/HT1808
    I think what you are saying is that itunes doesn't even recognize that your iphone is plugged in - so you can't start the recovery process?  I DO know that in the hours of me muddling through the internet - googling this issue - that I did see other posts of those who plugged into itunes, and it didn't recognize their iphone, but they DID have suggestions on how to deal with the problem... while I don't have "the" solution, I wanted you to know I did see an answer out there - just skimmed past it as I was searching for mine... sorry I don't remember good luck!

Maybe you are looking for

  • Export in procedure

    Can we use export/import command in a stored procedure itself?

  • Keyfigure mapping with characteristic

    Hi, I have a requirement like below. I have a Purchasing ODS in which creation date and release date is available as characteristic. Now I want this 2 characersitics as Keyfigures in masterdata in one object. Is it possible to map a characteristic of

  • Support Non-Existant?

    Okay so, going back over this, I sent a ticket with old skype support about a charge back to get an account restriction lifted off of my account... they could not help me and I could not give them the information required because the information has

  • Problem with newly installed JDK1.3.1

    hello people, I have just installed JDK1.3.1_01 version. My O/S is Windows 98 /Nt compatible. Somehow the permanent path setting instruction of Windows ME worked for me,have succesfully set the path at autoexec.bat file. I have written my source code

  • JSF and right click

    Dear Programmers Is there a way to capture event of right click using JSF? I need to implement popup menu that is shown as a result of clicking the right button of the mouse? I have looked at the popup of myfaces but it is more like a tooltip, it doe